We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,209 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Max. pallet weight: 1.2t, length: 2500mm, width: 1500mm, height: 700mm.
used
Max. output: 1400 bottle/h, PET can lid format set: 100/127mm, can diameter: 147.4/182mm, pitch diameter: 530, operational hours counter: ca. 500h, with documentation.
used
Max. working temperature: 250°C, with documentation, film and shrinking tunnel.
used
Turning circle diameter: 2950mm, rotary arm speed: 10/min, rotary arm drive: 0.75kW, film slide drive: 0.37kW, IP 54, connected load: 1.5kW, without accessories or spare parts, was maintained regularly.
used
Output: 1200/h, cap format: 63, 77, with documentation, without cap track and sorting plate.
used
Transport width: 4800mm, format: 0.25/0.5/0.7/1l, output: 38,000 bottles/h, with documentation and accessories.
used
Throughput rate: 2500-3000 pieces/h, including spare parts package, raw material can be supplied: approx. 3t of each of the 3 types of fleece, 1.5t of wire and 700kg of ear tape, an inspection on site is possible.
used
Connected load: 1.25kW, weight: 430kg, including documentation.
used
There are two identical cutting machines available, weight: 90kg, with documentation.
used
Fruit diameter: 100-250mm, skin thickness: 3-10mm, connected load: 1.5kW, width: 800mm, height: 2200mm, weight: 650kg.
used
Method: Bag-in-Box, filling format: 1.5-20l, output: 5-9/min, including documentation.
used
Weighing range: 60-250g, screw rotational speed: 2945/min, connected load: 2.7kW, with backfilling and screw.
used
Weighing range: 20-30kg, with controls and weighing electronics.
used
Suitable for 200l-kegs, with lid washing machine.
used
Weighing range: 0.2-2000g, max. conveying speed: 0.57m/s, connected load: 600VA, the machine needs overhauling.
used
Max. operating temperature: 150°C, compressed air supply: 6bar, power: 33kW, weight: 1.85t.
used
There are three identical machines available, connected load: 8.5kW.
used
Touchline CF375 performs creasing and folding work in a single operation. The system has a simple control panel, a reliable Stacking feeder with suction belt system and a unique creasing and folding tool. Important: one roller on this machine must be replaced
used
Paper tube length/ diameter: 1000-1600/ 20-160mm, connected load: 1.5kW, length: 4600mm, width: 1500mm, height: 1400mm, weight: 680kg, with instruction manual.
used
There are two identical machines available, format: 570x770mm, an inspection is possible.
used
Format: 570x820mm, an inspection is possible.
used
Max. rotational speed: 5000/min, chamfering/ calibration spindle power: 1.5/ 5.5kW, with documentation, an inspection is possible.
new
: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 36800 € : 743.36 € : 8200x41x1,3 mm : 20-100 m/min : 810 mm : 810 mm : 850x810 mm : rund 480 mm, quadrat 480 : 585 mm : 0.12 kW : 1.5 kW : 4 kW : 3900 mm : 1200 mm : 2350 mm : 3080 kg 2° inlined saw band optical height adjustment linear guides control panel security switch pressure adjustment hydraulic vice chip brush hydromechanical blade tensioning coolant pump heavy duty gearbox 1,2 m roller table user manual in GERMAN or ENGLISH OPTION: turn table for mitre cuts€ 3.960,-- hydraulic top clamping from above € 1.410,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
weight of the machine ca.:1200 kg total power requirement:5,5 kW dimensions of the machine ca.:1,8 x 1,67 x 1,30 m band length:575 mm max. clamping height:180 mm max. clamping width:350 mm table - height over basement:500 mm saw bow - stroke length:160 mm 100 % before loading warranty: none one used hacksaw, make KASTO, type EBS 320A, year of production 1963, general overhauled in 1972
used
number of spindles:6 spindle passage:40 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL
used
number of spindles:8
used
number of spindles:6 spindle passage:18 mm turning length:63/50 mm weight of the machine ca.:4,5 t spindle drive motor:11 kW
used
number of spindles:6 spindle passage:18 mm turning length:63/50 mm weight of the machine ca.:4,5 t spindle drive motor:11 kW
used
saw blade diameter:400 mm total power requirement:380V, 10A dimensions of the machine ca.:1 x 1 x 2 m
used
Maximum cutting capacity : ø 6mm (18 pieces) - ø 40mm (1x) at 850N/mm2; equipped with 1 feed magazine with overflow platform, supply roller conveyor, maximum length: 14,000mm; discharge roller conveyor with hook row ( 1A and 2A); length measuring system with BECKHOFF touch screen and PLC control box; The entire body must be professionally dismantled by the buyer
used
4 up Thermal CTP System AGFA Avento II S (Same as Screen 4300 S) year: 2008 32 diodes 102.000 plates produced with Singel Loder with Stacker with RIP Harlequin with few packages of offset plates In case you need chemical Processor we can offer separatly. Located German available now
used
saw band size 4120x34x1.1 mm; machine equipped with Band Dynamometric Tension adjustment; hydraulic/manual material clamp; equipped with 3x free-standing steel height-adjustable feed roller conveyor size 4560x720x1060 mm / size 3020x620x1060 mm / size 1000x700x1060 mm; coolant liquid pump; capacity around 320 mm; rectangle capacity 500x320 mm; capacity square 320x320 mm; cutting angle adjustable up to 45° / 60°; control panel; including 3x new saw blades
used
Equipped with Eclipse M145 magnetic clamping table size 355x150mm. Mounted on steel table.
used
Screen of plc control is defective - does not start involuntarily defective screen - charging options available - saw below 45 degrees - without extraction
new
Machine to close cans by seaming the lid onto the can - Specifications: max. speed of the machine in neutral: of the machine in neutral: 40 cycles/min | spin speed for sealing: 340 spins/minute | range for can: diameter: 50-160mm, height: 50-200mm | power: 1.1kW | machine dimensions: L2050?W1000?H1800mm | weight: 1100kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
used
8 up Thermal CTP Kodak Magnus 800 year 2010 with Multicassett Unit with Stacker PST Advand 48 Tiff Catcher Only 134.000 plates produced Available now
used
8 up Thermal CTP Screen 8600 NZ year 2016 Only 25.000 plates produced with Multicasett loader with processor Titanium Stacker with Equios Workflow
used
Turning diameter max: 20 mm Turning length max: 320 mm each spindle Drilling diameter max: 10 mm Max tap diameter: M8 Main spindle Speeds: 200 - 10,000 rpm. C-axis index: 0.001° Jerk spindle Speeds: 200 - 8,000 rpm. C-axis index: 0.001° Driven tools: 4 places / 200 - 5,000 rpm Driven tools rear: 4 places / 200 - 5,000 rpm. Tool turret: 10 places Bar feeder: FMB Diameter: 3 - 26 mm Rod length: 4,200 mm Country of origin: Japan Machine weight: 2800 kg Machine LxWxH: 3000 x 1400 x 1800 mm
used
CTP for conventional UV Plates Cron 3624 Fx+ year 2014 max size: 925 x 670 mm 24 Laser channel tiff catcher, without RIP Price on request
used
Designation: Bar feeder Manufacturer: SAMECA Type: Quick Sam 45 Year of construction 1996 Condition: used, functional Delivery: ex site, including truck loading Operating instructions are available
used
GUK K72/4-KTL-P2 Year 1990 Gremser feeder 4 cassettes 2 knives Gluing Device Delivery in production
used
- Pallet feeder FP 95 incl. VACULIFT III - MC Control - 1. Station 4 Niro fold buckles - Perforating, creasing and cutting deivce parallel fold - KL- und SUPER KTL-Version with 2 knifes - Vertical Stacker SBAP 46-ME, Bj. 2016 - Stream delivery ASP 66-2ME, Bj.2012
new
capacity 90 degrees: round: 255 mm capacity 90 degrees: square: 240 mm : 300 x 180 saw band length: 2.765 x 27 x 0,9 mm mm table height: 870 mm band speed: 18 - 110 m/min total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,63 t dimensions of the machine ca.: 1,8 x 1,85 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
4x compound slide - Pos.1; Pos.2; Pos.4; Pos.5 4x indipenden feed - Pos.1; Pos.2; Pos.4; Pos.5 threading device 1x threading spindle pick-up spindle broaching device set of cams set of collets bar-loader Cucchi Giovanni (YOM 2004)
used
used
Machine Details Stock-No. 1105-03834 Type of machine Cold Circular Saw Make MEP Type TIGER 350 Year of manufacture 1996 Type of control conventional Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base free truck Technical details saw blade diameter 350 mm Cutting diameter 250 mm stroke 170 mm Capacity 90 degrees: flat 235 X 70 mm capacity 45 degrees: flat 85 X 70 mm Cutting Speed 26/ 52 m/min total power requirement 3 kW weight of the machine approx. 700 KG Additional information VERY NICE
used
cutting diameter: 500 mm saw band length: 6990x41x1,3 mm cutting width: 860x500 mm cutting speed: 15-90 m/min Feed: 400 mm/min Rapid movement: 2500 mm/min main drive motor: 5,5 kW cutting length min.: 8 mm total power requirement: 8,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 3,3x1,2x2,42 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle passage: 12 mm Control: Fanuc type: LB 2 bar loader: FMB total power requirement: kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
offer 22492 Specifications: - Cutting range at 90° approx. 280 mm - flat 410 x 200 mm - Cutting range 45° approx. 230 mm - flat 245 x 210 mm - Band saw blade dimensions 3660 x 25 x 0.9 mm - Material replenishment machine - Cutting speeds infinitely variable 17 to 106 m/min - Hydr. raising + lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 1.1 kW - Coolant device - Stop 1000 mm - Space requirement approx. W 2000 x H 1200 x D 1000 mm - Weight approx. 380 kg
used
Inv. Num. : 6522 Type: BS18-III Producer: Tsugami Mori Generated: 2000 Parameters: rod diameter: 18 mm Min. rod diameter: 3 mm Maximum spindle speed: 5000 1/min Number of all tools: 16 pieces Number of CNC controlled axes: 5 pieces Equipment: Bar feeder (3 meters) IEMCA Genius 226 Part of the offer: Guiding collets to feed Collet E140 of the main and counter spindle Reducing bushes (incl. collets ER11 ER16) Guide sleeve collet F609 Equipping the machine with tools (square 12x12 mm)