automatic used for sale

: neu : ca. 10 Wochen ab Auftrags : Türkei : 9300 € : 176.7 € : 2730x27x0,9 mm : 35-70 m/min : 230 mm : 230 mm : 240x230 mm : 590 mm : 0.12 kW : 0.37 kW : 1.3 kW : 1700 mm : 800 mm : 1500 mm : 530 kg blade brush control panel height adjustment switch hydromechanical blade tension inverter mechanic top clamping material length stop coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 99500 € : 1820.85 € : 9600x54x1,6 mm : 20-100 m/min : 800 mm : 800 mm : 1300x750 mm : rund 800 mm, quadrat 770 : rund 570 mm, quadrat 570 : rund 800 mm, quadrat 770 : 880 mm : 0.12 kW : 0.37 kW : 7.5 kW : 5050 mm : 2200 mm : 2900 mm : 6700 kg Hydraulischer Spannstock Digitalanzeige für Winkelanzeige Hydraulische Klemmung des Sägearmes Sägearmdrehung von Hand Stufenlos einstellbare Absenkgeschwindigkeit des Sägearmes Automatische Sägerahmenanhebung nach Schnittende Sensitive Schnittdruckregulierung in Abhängigkeit der Materialbeschaffenheit Hydromechanische Bandspannung über Manometer ablesbar Mobiles Bedienpult Schräg verzahntes konisches Schwerlastgetriebe Angetriebene Späne Bürste Bandführung über Hartmetallplatten und Rollen Automatische Bandbruchsicherung Kühlmitteleinrichtung HYDRAULISCHE ANHEBUNG DES SÄGERAHMENS Bet ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 26700 € : 493.95 € : 3660x27x0,9 mm : 20-100 m/min : 320 mm : 320 mm : 350x320 mm : rund 160 mm, quadrat 150 : rund 260 mm, quadrat 180 : rund 300 mm, quadrat 250 : 740 mm : 0.12 kW : 1.1 kW : 2.2 kW : 2100 mm : 2200 mm : 1500 mm : 1660 kg blade brush NC control panel hydraulic vice hydromechanical blade tension inverter coolant pump saw blade security switch gearbox height adjustment user manual in GERMAN or ENGLISH OPTION: hydraulic blade tentioning € 1.100,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pile feeder F535 – Vacustar separating head 4 buckles 1 knife Batch counter A56 delivery

- flat pile feeder - 1st station with 4 buckles - 2nd station with 4 buckles - Gate fold - Mobile cross fold station - stream delivery

SPECIFICATIONS: Machine operation with rotating bezel diameter mm: 400 Speed m/min: 40 Installed capacity Kw: 3,7 Width adjustment with pushers Accessories: - 2 roller conveyors for the input and output area - Coil holder -Claw - Stretch film cutting machine

1992 VZ430014 Serial No. 2003492 T45-F, PORT 1/3, K.03/14 T45-1-45/4, PORT 1/3, K.03/14 A45/1-DC, PORT 1/3, K03/14 Available: immediately Located: Germany

offer 22489 Specifications: - Cutting range at 90° approx. 320 m - flat 320 x 320 mm - Material replenishment machine - Band saw blade dimensions 5095 x 34 x 1.1 mm - Cutting speed 10 to 120 m/min - hydr. Lifting – lowering the saw frame - upper stroke limitation of the saw frame - Cutting pressure infinitely adjustable - hydr. Material clamping pole - Chip conveyor screw - Coolant device - Discharge roller conveyor 2500 mm - Drive 400 V / 4.0 kW - Space requirement approx. W 2500 x H 1950 x D 2000 mm - Weight approx. 2200 kg

Deir piece 3 cheek chuck Brand Forkardt 2x 315 mm diameter and 97 mm high 1x 200 mm diameter and 75 mm high with various attachment jaws The retail price is net.

: neu : ca. 6 Monate ab Auftragse : Türkei : 29300 € : 591.86 € : 6000x41x1,3 mm : 20-100 m/min : 560 mm : 560 mm : 570x560 mm : 590 mm : 0.12 kW : 1.1 kW : 4 kW : 500 mm : 1050 mm : 2050 mm : 2242 kg NC control double column band saw 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tension inverter linear way optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch gearbox user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

#4351 Horizon AFC 504 AKT Size: 490x648mm; min. 120x172mm Age: 2000 - 4 Pockets - 1 knife -Delivery

Manufacturer: Schütte Type: ADH 160 Machine No.: 225 Year of construction: 1981 Weight: 11t General / technical data: turning length: 125mm workpiece diameter: 168mm max drilling depth: 125mm Adjustable quantity: from 3.4 to 450 sec. Operating hours: 8.200h Working spindle speed: from 90 – 1120 rpm Installation area (l x w x h): approx. 4730 x 1700 x 2120mm Power Supply: 380V / 50Hz Accessories: 7 cross slides 8 longitudinal slides Tapping device 4x 2-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of lining: Röhm 0W-406 682 Clamping force 1200 da N 4x 3-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of feed: Röhm 1W-406 681 Clamping force 1800 da N Insert arm over lining 100mm. The workpiece is fed to the insert arm by a swivel arm and rotary gripper. Rem ...

Good condition fully functional, little used. From year of construction 2016! In stock & immediately available. Operating voltage: 230 V / 50 Hz AC Total connected load: 0.72 kW Strapping cycle: approx. 2.5 sec. Weight: approx. 230 kg Polypropylene strapping: 10 – 15.5 mm wide Height: 810 mm Floor space: Depth: 630 mm Width: 1450 mm Height: 1540 mm Sheet size: W 850 x H 800 mm Price net plus VAT

Horizon AFC 746 D - cross folder 16 pages year 2019 Counter 73 million good condition in production available immediately

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 11900 € : 242.76 € : 3660x27x0,9 mm : 20-100 m/min : 320 mm : 300 mm : 320x300 mm : 640 mm : 0.12 kW : 0.37 kW : 2,2 kW : 1900 mm : 850 mm : 1300 mm : 770 kg Roller material feed with manual adjustable length stop with limit switch blade brush control panel height adjustment bar with limit switch hydromechanical blade tension inverter hydraulic vice coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 59000 € : 1180 € : 6000x41x1,3 mm : 20-100 m/min : 540 mm : 540 mm : 670x540 mm : rund 540 mm, quadrat 540 : rund 510 mm, quadrat 510 : rund 270 mm, quadrat 250 : 805 mm : 0.12 kW : 2.2 kW : 4 kW : 3100 mm : 2350 mm : 2150 mm : 3800 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping € 2.230,-- micro coolant equipment € 890,-- laser cutting line € 385,-- ALTERNATIVE: model BMSO 540 CGS NC (with servo instead of hyraulic feed) € 66.800,-- The data for this ad was created with ModulMWS - t ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 52200 € : 1044 € : 5400x41x1,3 mm : 20-100 m/min : 440 mm : 440 mm : 610x440 mm : rund 440 mm, quadrat 440 : rund 430 mm, quadrat 430 : rund 320 mm, quadrat 260 : 807,5 mm : 0.12 kW : 1.1 kW : 4 kW : 2850 mm : 2350 mm : 2000 mm : 3600 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping € 2.230,-- micro coolant equipment € 890,-- laser cutting line € 385,-- ALTERNATIVE: model BMSO 440 CGS NC (with servo instead of hyraulic feed) € 58.900,-- The data for this ad was created with ModulMWS - ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 42800 € : 864.56 € : 5200x34x1,1 mm : 20-100 m/min : 360 mm : 360 mm : 610x360 mm : rund 360 mm, quadrat 360 : rund 360 mm, quadrat 360 : rund 325 mm, quadrat 265 : 735 mm : 0.12 kW : 1.5 kW : 3 kW : 2850 mm : 2250 mm : 1870 mm : 2400 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping € 2.120,-- micro coolant equipment € 770,-- laser cutting line € 385,-- ALTERNATIVE: model BMSO 360 CGS NC (with servo instead of hyraulic feed) € 48.300,-- The data for this ad was created with ModulMWS - ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 32600 € : 658.52 € : 4380x34x1,1 mm : 20-100 m/min : 325 mm : 325 mm : 400x325 mm : rund 325 mm, quadrat 325 : rund 300 mm, quadrat 265 : rund 190 mm, quadrat 190 : 655 mm : 0.12 kW : 1.1 kW : 2.2 kW : 2130 mm : 2150 mm : 1650 mm : 1860 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping € 2.120,-- micro coolant equipment € 770,-- laser cutting line € 385,-- ALTERNATIVE: model BMSO 325 CGS NC (with servo instead of hyraulic feed) € 36.900,-- The data for this ad was created with ModulMWS ...

Selectomat System Schlatter RMB EMBA 18

Labeler prepared for 3x adhesive labels with hot melt (front/back/safety tab). The labeller was overhauled in 2021 by the manufacturer Gernep, including new electrics according to CE standard. The labeller is equipped for the glass type DTO80. The labeller was in operation for about 200 hours after the overhaul.

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 13100 € : 267.24 € : 3660x27x0,9 mm : 20-100 m/min : 320 mm : 300 mm : 320x300 mm : 640 mm : 0.12 kW : 0.37 kW : 2 kW : 1900 mm : 850 mm : 1300 mm : 770 kg Roller material feed with encoder and NC control blade brush control panel height adjustment bar with limit switch hydromechanical blade tension inverter hydraulic vice coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

STAHL FOLDER TF 56-44- FE -Year 1991, paper size max 56x95 cms. -High pile delivery with Tremat -Four buckles in first station with anti noise hoods -Four buckles in second station -Counter, air pump -Delivery, All rollers in nice conditions -In production, Available at the end of January

Stock number: 3740 CNC LATHE Manufacturer: MAZAK, Type: QT 350 MY Nexus Machine NO.: 184678, Year of construction: 2006 Specifications: orbit diameter 420 mm dia. Max. rot. About bed 700 mm slide. Turning length 1538 mm Main engine power 30 kw Main spindle speed range 25-3300 rpm Spindle bore 102 mm dia. C axis - main spindle movement 0.001 degrees Z Ash movement 1607 mm Y axis 150 mm Tool turret 1 with 12 stations Driven stations revolver 1 12 pieces. Motor power driven tools 7.5 Kw Accessories: Hydr. Chuck main spindle Kitagava B-32/2 - 310 mm mm dia Hydr. Lunette Length: 4300 mm, Height: 4300 mm, Width: 2600 mm, Weight: 8600 kg

Description: Exact contents See photos weight approx.: 450 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 300 mm

Basket size LxWxH: 600x400x300 mm Cleaning medium: aqueous, non-foaming solution pH 5-10 Washing container approx.: 400 l Rinsing tank approx.: 320 l Loading height approx.: 1.000 mm Loading door approx.: 810x430 mm Load weight evenly distributed: 100 kg Operating voltage: 400V/50 Hz Total connection: 36 kW Weight without filling approx.: 1.300 kg Overall dimension LxWxH approx.: 2.000x2.050x2.100 mm

weight of the machine ca.:1200 kg total power requirement:5,5 kW dimensions of the machine ca.:1,8 x 1,67 x 1,30 m band length:575 mm max. clamping height:180 mm max. clamping width:350 mm table - height over basement:500 mm saw bow - stroke length:160 mm 100 % before loading warranty: none one used hacksaw, make KASTO, type EBS 320A, year of production 1963, general overhauled in 1972

number of spindles:6 spindle passage:40 mm ?Bar feeder complete is 4.70 meters - for 3 meters of material ?The machine is still on ?Materail to be processed on the machine: Steel ?Production with OIL

number of spindles:8

number of spindles:6 spindle passage:18 mm turning length:63/50 mm weight of the machine ca.:4,5 t spindle drive motor:11 kW

number of spindles:6 spindle passage:18 mm turning length:63/50 mm weight of the machine ca.:4,5 t spindle drive motor:11 kW

: 820 mm saw band length: 8200 mm cutting width: 850 mm : 850 x 820 mm : 820 x 820 mm : 480 mm : 480 x 480 mm Capacity 45° rectangular: 480 x 820 mm table height: 585 mm cutting speed: 20 - 100 m/min dimensions of saw-band: 8200 x 54 x 1,6 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 9,4 kW weight of the machine ca.: 3,43 t dimensions of the machine ca.: 3,9 x 1,2 x 2,35 m Horizontal band saw. The bow is made of heavy steel and the two pillars constitute a strong and rigid saw frame. This ensures high accuracy when cutting. The machines are fitted with an integrated coolant pump that supplies oolant to both guide assemblies. Blade guides with rollers and carbide pads provide precise support for the blade. The machines switch off automatically at the end of the cutting proces and the saw arm is lifted hydraulically. ?inverter ?hydromechanic blade tension ?swar ...

saw blade diameter:400 mm total power requirement:380V, 10A dimensions of the machine ca.:1 x 1 x 2 m

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 19100 € : 389.64 € : 4800x34x1,1 mm : 20-100 m/min : 380 mm : 380 mm : 520x380 mm : rund 300 mm, quadrat 300 : 590 mm : 0.12 kW : 0.55 kW : 3 kW : 2850 mm : 930 mm : 1660 mm : 1330 kg 2° inclined band blade brush control panel hydraulic vice hydromechanical blade tension inverter for continous adjustable cutting speed linear guides optical height adjustment pressure adjustment coolant pump saw band security switch heavy duty gearbox 1,2 meter roller table user manual in GERMAN or ENGLISH OPTION: turn table for mitre cuts€ 3.520,-- hydraulic top clamping € 1.170,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a NOVAPAC 75 M with laminar airflow system which was completely overhauled by NOVAPAC. Format is a 500 gram cup which is closed with a circuit board. In addition to the UV cups and blank disinfection using UV light, NOVAPAC added a laminar airflow system to keep the filling area clean. Price is a matter of negotiation and the system can currently still be viewed at the customer's premises. A NOVAPAC 75 M with laminar airflow system is being sold, which was completely overhauled by NOVAPAC. The format is a 500 gram cup that is closed with a circuit board. In addition to the UV cup and circuit board disinfection using UV light, NOVAPAC added a laminar airflow system to keep the filling area clean. The price is a matter of negotiation and the system can currently still be viewed at the customer's.

Touchline CF375 performs creasing and folding work in a single operation. The system has a simple control panel, a reliable Stacking feeder with suction belt system and a unique creasing and folding tool. Important: one roller on this machine must be replaced

Number of axes: 6, x-travel: 240mm, y-travel: 350mm, z-travel: 350mm, U-travel: 9500mm, A-travel: 360°, max. bar length: 7500mm, max. workpiece weight: 500kg, work spindle power: 4.55kW, suitable for drilling, milling, thread cutting, aluminum cutting, has been regularly serviced, with documentation and roller conveyors, on-site inspection is possible.

X-travel: 180mm, z-travel: 430mm, max. chuck diameter: 160mm, weight: 10t.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 36800 € : 743.36 € : 8200x41x1,3 mm : 20-100 m/min : 810 mm : 810 mm : 850x810 mm : rund 480 mm, quadrat 480 : 585 mm : 0.12 kW : 1.5 kW : 4 kW : 3900 mm : 1200 mm : 2350 mm : 3080 kg 2° inlined saw band optical height adjustment linear guides control panel security switch pressure adjustment hydraulic vice chip brush hydromechanical blade tensioning coolant pump heavy duty gearbox 1,2 m roller table user manual in GERMAN or ENGLISH OPTION: turn table for mitre cuts€ 3.960,-- hydraulic top clamping from above € 1.410,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Connected load: 2.6kW, length: 700mm, width: 1700mm, weight: 710kg, including bar feeder IEMCA MINI BOSS 325 CNC/ 32, with documentation, on-site inspection is possible.

With dual stroke, max. punching force: 40t, stroke: 30-60mm.