automatic storage system used for sale

Description: Eagle Systems CFM 106-20K Eco-Eagle Foil Module Consisting of: 1. Bi-directional differential shaft (x2) 2. Automatic pneumatic connection 3. SS Dual hardened helical gears both shafts 4. Quick release rubber module spreader rollers 5. Lower in-feed roller assembly for proper foil path 6. Heavy duty linear thrust bearings 7. Precise air transducers 8. Air pressure control sensor 9. PID closed loop air system control 10. Eco-Power” Minimal power servo motor control 11. Closed loop sensors for foil speed control 12. Fail safe closed loop sensors for multi foil roll control 13. Foil position encoder 14. Fail safe wiring system 15. Solid state relays 16. Mode indication by lights 17. Fully automatic control 18. Fail safe press guarding 19. Full Module guarding 20. Foil shaft lifting beam 21. All electrical and pneumatic controls contained within the modu ...

1992 COMBINED CONCENTRATION SYSTEMType: AFN 454 US The system was in operation for a maximum of 2 months per year. WITH AROMA RECOVERY, USED, REBUILT AND EXPANDED, IN ADDITION TO EQUIPPED WITH NEW COOLING TOWER CIRCUIT EVAPORATOR TYPE OPERATION Horizont TYPE HEAT EXCHANGE al, CONDENSATION AROMA 4-stage EXTRACTION with SYSTEM VERSION: WATER live steam EVAPORATION SYSTEM TYPE > NEW preheating, recovery, cooling mixed condensation semi-barometric rectification - tray column especially for the juice industry 4 840 Kg/h AFN 454 U-S Technical data: 1-stage dearomatization and concentration, combined operating mode SYSTEM TYPE: AFN 454 U-S PRODUCT: Apple juice, cloudy Input quantity 6 600kg/h Input dry matter 12,0% Input temperature 15 ·c Water evaporation 4 840 kg/h Initial quantity 1 760 kg/h Starting dry matter 45 % Starting temperature approx. 18 ·c Aroma q ...

1) Twin Vitacount 12-2 The Vitacount 12-1 is the lower cost solution designed for vitamin applications, yet it combines proven product feed technology with electronic controls and infrared count heads as used on the higher specification machines. The 12-1 features 12 product feed tracks. The Vitacount features an integrated chip and dust extraction system. A touch screen control panel allows easy access to machine and product parameters, giving the operator good visibility of the complete filling process. The product library can store up to 1000 different set-ups and offers instant recall of both product and machine parameters. Vitacount is height adjustable by means of the manually adjusted telescopic funnel arrangement to allow differing heights of bottle to be filled and the system offers maximum versatility as product feed system requires no change parts and is capable of packagin ...

Machine Details: - Type: REH 500 eco - Year of Manufacture: 2017 - Quantity: 4 units - Power Output: 500 kW - Fuel: Fermentation residues (Gärreste) - Maximum Operating Pressure: 2.5 bar - Maximum Operating Temperature: 105°C - Water Capacity: 3200 liters - Electrical Connection: 400V, 63A - Application: Combustion of fermentation residues; other fuels may be possible - Accessories: Chimney, ash discharge, dust silo, and filter Brief Description: Rotary kilns designed for the combustion of dried fermentation residues. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Jaw Crusher System for Sale Manufacturer: 3-B-Systeme Year of Manufacture: 1992 Operating Hours: 2,144 h The system consists of the following components: - . (Pos.1) 1 piece Müller jaw crusher, Rottweil, 800x500 mm inlet opening .Jaws approx. 70-80%, upper part new. - (Pos.2) 1 piece of steel construction from 3-B-Systems with pre-screening and bunker attachment - (Pos.3) 1 piece crushed material discharge belt - (Pos.4) 1 piece overband magnet - ( Pos.5) 1 piece 200 kVa power generator, soundproofed Find more here - .ucymachines/ Contact us at - sales@ucymachines

Machine Type: Electrode Inverter Welding Rectifier Make EP-Systems Type Cycle 60.16 Connection voltage 230/400 V Adjustment range 1 – 160 amps Duty cycle 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter through built-in fan Portable assembly system design Fuse 26 Ampere Dimensions L x W x H 420 x 190 x 300 mm Weight 8 kg Age 10 years Condition workshop-tested new incl. UVV test report Scope of supply welding system with the following accessories: 1 piece ground cable 16 sqmm, 4 mr. long 1 piece electrode cable 16 sqmm, 4 mtr. long 1 piece of hand shield 1 piece facing glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2 rows 1 piece mains plug 230 V, soli ...

Comprises of 300 litre and 500 litre vessels with independent control panels, a tote bin hoist and a transfer pump. Machinery in nice ex factory condition and being removed from the factory in Europe at the end of January 2025.

Machine Description - Machine Type: 6-Axis Robot - Manufacturer: Martin Systems - Model: RoboCube Maxi - Type: MRC 242499-10 - Fanuc M-20iA - Year of Manufacture: 2019 - Payload: 20 kg - Maximum Reach: 1811 mm - Repeatability: 0.08 mm - Weight: Approx. 250 kg - Dimensions: L 2900 x W 1600 x H 2100 mm --------------------------------------------------------------- Condition of Use - Condition: - Like new, well-maintained, fully functional Find more here - .ucymachines/ Contact us at - sales@ucymachines

We are offering for sale a Chamber belt system with shrink tank. LikeNEW! Barey used CHAMBER BELT VACUUM MACHINE Model: Conveyor Pro 1065 Packable Products - Meat - Sausages - Cheese - Fish - Fruits - Vegetables - Ready meals - Mechanical components - Electronic components Technical Data - Structure: Stainless Steel AISI 304 - Control Panel: 7 PLC Touchscreen - Dimensions (L×W×H): 2741×1237×1645 mm - Weight: 900 kg - Inner Vacuum Chamber Size: 1110×840 mm - Usable Lid Height: 250 mm (Optional: 150-200-320 mm) - Sealing Bars: 1 or 2 × 1000 mm - Distance Between Sealing Bars: 670 mm - Sealing Type: Monoseal or bi-active, double seal or wide sealing - Conveyor Belt Speed: Variable, up to 40 m/min - Vacuum Pump: 1 or 2 × 300 m³/h (7.5-15 KW) + Booster 500 or 1000 m³/h (5.5 KW) - Final Vacuum Degree: 1 mbar absolute - Power Supply: 400V - 3PH + N + PE - 50Hz - 3KW (without pump ...

Bottle Leak Detection System – WILCO Wilcomat R18 SQ/FS High-performance bottle leak detection system designed for quality control in beverage and liquid packaging lines. The WILCO Wilcomat R18 SQ/FS ensures reliable inspection of bottles to detect leaks and maintain product integrity during high-speed production. General Information - Manufacturer: WILCO - Model: Wilcomat R18 SQ/FS - Year of Manufacture: 2006 Technical Specifications - Production Capacity: 35,000 bottles per hour Application - The system is designed for automatic leak detection of bottles in high-speed packaging lines, ensuring that only properly sealed containers continue through the production process. Typical applications include: - Bottled water - Soft drinks - Dairy beverages - Juices and other liquid products Key Advantages - Reliable WILCO leak detection technology - Suitable for hi ...

Sinel Systems Type A tube labeling machine suitable for conical products with a diameter of 16 - 40 mm and a length of 152.5 - 173.5 mm, label width 15 - 160 mm, label length 10 - 400 mm, with infeed roller conveyor for manual feeding of the tubes, label dispenser HERMA Type H400 R IDEA, label roll core diameter 76mm, label roll outer diameter max. 300mm, label dispensing speed 3 - 20 m/min., product presence control and stopper color control, Omron HMI operator control panel, Siemens S-7-1200 PLC, electrical connection 220V/ 500W, machine floor space 1650 x 780 mm (L x W), machine height approx. 1980 mm, Machine nett weight aprox. 210kg.

This material filler is equipped with a 1 kW electric motor. It can suck 2 kinds of materials into its large tank. The mounted controller can also regulate the ratio of materials. There are several of them. Other fillers, dyes and other machines are also for sale. Please see my other ads.

description: For printing of labels, bottles, packaging etc: prints only in black colors, incl. frame Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We are looking forward to hearing from you. All information is supplied without guarantee.

Size: Equipments: 40 nozzles for consistent adhesive application

For Sale: Complete Drum System for Zinc Electroplating Year of Manufacture: 2000 This complete setup includes all essential components for efficient operation: - Drum Line with 5 TW - Centrifuge with TULZ from WMV - ROSS Cooling System - Drum Dryer Find more here - .ucymachines/ Contact us at - sales@ucymachines

We are offering a complete Water-Cooled Induction Leveling System, composed of the following components: 1. Electrical Power Unit - Power Supply: 3 x 400V, 50/60 Hz - Current (In): 50 A - Short-Circuit Current (Icc): 35 kA - Item: 01 - Type: IFC/A-25 (25 kW / 20 kHz) - Year: 2023 2. Inductor Unit - Manufacturer: ATE - Drawing: 239003100_0 - Item: 03 - Year: 2023 - Type: INDUKTOR RECHTS (Right Inductor) 3. Chiller Unit - Manufacturer: M.T.A - Model: TAEevo TECH 051 - Production Year: 2023 - Voltage: 400V / 3Ph / 50 Hz - Power Consumption: 8.8 kW - Current: 10 A - Protection Class: IP54 - Refrigerant: R410A - Charge: 2.088 kg - Global Warming Potential (GWP): 2088 - Cooling Capacity: 32.0 kW (EWT 20°C, LWT 15°C) - Water Flow Rate: 5.5 m³/h - Water Connections: 1 1/4 - Weight: 239 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Flake Ice Machine Make: Ice Systems Model: F2 AS 2 TON Flake Ice Machine Built 2018 IN cabinet, with stand

x-travel: 1800 mm y-travel: 800 mm z-travel: 1000 mm total power requirement: - kW weight of the machine ca.: 3000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Aircooled chiller/Heat pump SYSTEMAIR SYSCROLL 20 AIR EVO HP 20 kW/20 kW Cooling capacity: 20 kW / 5.69 tons (12/7 — 35°C) Heating capacity: 20 kW / 5.69 tons (40/45 —7°C) Year of manufacture: 2020 Options: Heat pump. Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Mitsubishi Electric ANB42FPJMT (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump EBARA matrix 5-2t Dimensions: 1.6x0.6x1.8 m. Weight: 281 kg. Working hours: 2330 h. Condition: Good

TANKER TRUCK LOADING SYSTEM, for plastic granules, Loading speed 60 m3/h, Made in sturdy painted carbon steel structure, including two big bag supporting structures, n.2 frames to fix the bags on the structure by lifting the pre-hooked frames, The height of the structures can be adjusted to suit the size of the big bags, and two side ladders provide easy access to the top of the structure., The two bags rest on safety supports to prevent hands from being crushed when the bottom is opened., Sturdy hooks hold the big bag straps in place., 1.000 x1000 mm. hopper to collect the material from the big bags., A flap door at the bottom, with a safety micro, facilitates maintenance and cleaning operations., the 7,5 kw driven screw will lift material from the hopper, Discharge fixed height 4,5 m.from floor, Screw length 8.300 mm, The bearings are dust-tight and automatically greased., at the end o ...

CROSSED MIXING SYSTEM FOR PLASTIC MATERIALS, The system includes n.2 x 20.000 lt. vertical mixers which fill each other through the endless screw conveyor. (ask for different capacities), for each mixer :, total height approx 6.950 mm including transmission group, max diam. 2.380 mm.(standard transport), constructed in painted electro-welded carbon steel., inner auger diam.350 mm., lower hopper with safety grid and sampling shutter, complete with anti-dust cover, mm.600×500, pulley and belt transmission, protected by carters (possible gearbox, instead), inspection doors with safety limits, cleaning hinged door with on bottom of cone for complete discharging, with safety opening, bottom discharging pipe on the other mixershopper with pneumatic valves, side discharging pipe to big bag with valve mm.at 2.700 mm from ground with pneumatic valves, electric min/max level indicator, paddle typ ...

PROGRESS MESH WELDING M-System Evolution Model 2012 M25576 • MMR – Straightening Machine Model 2012 • SWR – 6 Welding Heads Model 2012 Max mesh size: 3.5 m width and 9.0 m length Cross & length wires diameter: 6, 8, 10, 12, 16mm Mesh characteristics: Width: up to 3,500mm, Length: up to 9,000mm Min. Width: 500mm, Min. Length: 1,000mm Max. Bar Length: 9,000mm, Min. Bar Length: 500mm Bar Length Tolerance: +-5mm, Bar Placing Accuracy: +- 10mm Crosswire Diameter: 6, 8, 10, 12 and 16mm Line Wire Diameter: 6, 8, 10, 12 and 16mm Bar on Bar Welding: 12mm on 12mm Placement Angle of Bars: 0° or 90° Minimum Flying End Length: 25mm A Bar must have at least two welding nodes Only one Bar per receiver is permissible Standard centres: Cross Wires: Infinetely variable (minimum 35mm) Line Wires: Multiple of 25mm Minimum Centres: Cross Wires: 25mm Line Wires: 25mm ...

Slide belt magnetic conveyor, magnetic slide conveyor DGS System GmbHZ conveyor, sliding belt system, conveyor belt, magnetic belt conveyorType no.: MBF 326P31,75 Containment no.: 44489-10 Year of construction 2017Slide width 300 mmDistance of permanent magnets 250 mmInsertion length approx. 3400 mm (up to assembly box)Insertion length approx. 3900 mm (without assembly box)Insertion height 210 mmSlide-in width housing 370 mm Insertion width Thread mounts for adjustable feet 410 mm Insertion width on the assembly box 470 mm Discharge head - discharge height approx. 1040

EyeSys System 2000 Corneal Analysis System The EyeSys 2000 Corneal Analysis System is designed to provide unmatched performance, accuracy, ease of use, and affordability with these key features: Optimal central and peripheral corneal coverage provides complete information for the entire cornea Automatic calibration and automatic data correction ensure greater accuracy of topographic data. Automatic focusing and simple examination paths improve ease of use, speed up the examination process and virtually eliminate all focus differences between operators. Advanced software applications include primary care, co-management, corneal surgery, and contact lens fitting. The unique and patented three-camera technology provides a side-view image of your patient's cornea and enables the use of true aspherical image processing algorithms. Simultaneous positioning of the patient and opera ...

Meat Grinder S32F Unger system 5 tools Manufacturer: Sind Model: S32F Dimensions: 600x550x1000 mm Electric power: 1.5kW Capacity: 500kg/h

Meat Grinder Unger system 5 tools Manufacturer: Sind Model: S32P Dimensions: 800x600x1000 mm Electric power: 3kW Capacity: 800 - 1,000kg/h

In stock first week of September

Ref. no.: 18565 Manufacturer: DEMAG Year of construction: 2005 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 500 x 500 mm Mould height min.: 250 mm Opening width: 750 mm Platen size (h x v): 750 x 750 mm Injection unit Screw diameter: 45 mm Injection volume: 323 cm³ Shot weight: 290 g Injection pressure: 1973 bar Measurements and weight Dimensions: 5.45 x 1.63 x 2.1 m Machine weight: 7500 kg Robot Producer: Wittmann Type: W721-0231 Year: 2005 Further information: The Demag Ergotech System series hydraulic injection moulding machine is a suitable plastic injection moulding machine for technical plastic parts and automated serial production applications. Thanks to its hydraulic operating principle, the machine offers powerful and stable injection performance, while the Demag NC4 control system ensures precise process control. The machine is equip ...

Aircooled chiller SYSTEMAIR SYSCROLL 420 AIR CO E COAT 414.2 KW Cooling capacity: 414.2 kW / 117.78 tons (12/7 — 35°C) Year of manufacture: 2016 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 4 pcs. Bitzer GSD80485VAB4-2 (scroll) Type of refrigerant: R410а Number of fans: 8 pcs. Dimensions: 4.55x2.15x2.5 m. Weight: 2441 kg. Working hours: 5588/5528/7735/2825 h. Condition: Good

Container Size With Actual Configuration: 2 l // Number Of Heads: 5

APV PASTEURIZATION SYSTEM FOR FISH BROTH 1,000 LITRES/HOUR Automatic system designed for the pasteurization of 1,000 litres/hour of strained fish broth for subsequent packaging. Manufacturer: APV Year: 2002 OPERATION DESCRIPTION: - Inlet temperature: 20 °C - Process temperature: 105 °C - Outlet temperature for packaging: 35 °C The whole process consists of different stages that can be programmed using the control panel: 1. Sterilization: carried out by the circulation of hot water at a temperature of 115-120 °C for 30 minutes. 2. Production with water: cooling water flows inside the circuit until the process temperature that will be applied to the product is reached. 3. Production: the unprocessed product is fed into the regulation tank and then the production phase takes place in the circuit. 4. Cleaning-in-place: the installation is cleaned in place by ...

General SKU394U1110 MakeLauda TypeTR400 HK/K-EX Mach.No.HKS13075 Year of construction2013 Pressure Working pressure10 Bar Main Features Heating (medium)Oil Capacity12.46 KW Temp.130 °C Specified Features - Temperature control unit Heating medium:Therminol D12 Electric capacity12,46 kW, 400 volt (Ex) Temperature-35ºC/+130ºC With pump2x Capacity18m²/h Motor5,5kW, 400/690Volt, 2925rpm (EX) (2x) MaterialStainless steel 1.4571 (316Ti) General LocationBarneveld With switchcheck Floorspace1,75x1,0 m Total height2,45 m Weight1800 kg CEcheck ATEX designedcheckGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalGreen FridayRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsTemperature control unitsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSug ...

General SKU394U1121 LocationBarneveld CEcheck MakeLauda Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit Temperating machinecheck Heating medium:Therminol D12 Electric capacity12.9 kW, 400 volt (ex) Temperature-40°C/+200°C With pump(2x) Motor5,5 kW, 400/690 volt, 2800 (ex) MaterialStainless steel 1.4571 (316Ti) General TypeTR400 HK/HK-EX Mach.No.HKS08025 Year of construction2008 Floorspace1,75x1,0 m Total height2,50 m Weight1800 kg ATEX designedcheckGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalGreen FridayRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsTemperature control unitsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarDairyLubrica ...

General SKU269W395 LocationBarneveld CEcheck MakeSatorius Stedim Systems Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Silo Silocheck Closedcheck Capacity500 l Sizes800 x1200 x 1200 mm Flat topcheck With covercheck MaterialStainless steel 1.4307 (304L) General TypeFXC106609 Year of construction2021 Mounted on framecheck Mounted on wheelscheck Floorspace0,8 x 1,2 m Total height1,2 m Weight200 kg Extra SpecificationsNew, unused item.The item is delivered in its original packaging (kit).OintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSilosDetergent & surf.SugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicPowdered foodsPaints & coatingsSartorius Stedim SystemsIndustries > Pharmaceutical > OintmentsIndustries > Chemical > Fine chemicalsIndustries > Food & Feed  ...

General SKU394U1122 LocationBarneveld CEcheck MakeLauda Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit Temperating machinecheck Heating medium:Therminol D12 Electric capacity12.9 kW, 400 volt (ex) Temperature-40°C/+200°C With pump(2x) Capacity18m²/h Motor5,5kW, 400/690 Volt, 2880 rpm (ex) (2x) MaterialStainless steel 1.4571 (316Ti) General TypeTR400 HK/HK-EX Mach.No.HKS08027 Year of construction2008 Floorspace1,75x1,0 m Total height2,50 m Weight1800 kg ATEX designedcheckGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalGreen FridayRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsTemperature control unitsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood a ...

General SKU294W550 LocationBarneveld CEcheck Pressure Working pressure5 Bar Main Features MaterialStainless steel Volume120 Ltr. Motor1.5 KW Specified Features - Dosing pump Pumpcheck Number of pumps:2 Capacity120 l/h With motor0.75 kW (2x) With frequency invertercheck Dosing pumps MaterialStainless steel 1.4435 (316L) General MakeAmersham Biosciences Mach.No.1564 Year of construction2003 Mounted on wheelscheck With switchgearcheck Floorspace1,10 x 2,30 m Total height2,10 m Weight300 kg Extra Specifications- This dosing pump was part of HPLC column, SKU 294W554 and 294W555&:nbsp:OintmentsBiotechnologyAgrochemicalsFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsFood additivesDosing pumpsBeveragesDyes & pigmentsAPIOils & fatAmersham Pharmacia BiotechIndustries > Pharmaceutical > OintmentsIndustries > Chemical > BiotechnologyIndustries > Chemical > Agr ...

General SKU394U1120 LocationBarneveld CEcheck MakeLauda Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit Heating medium:Therminol D12 Electric capacity12.9 kW, 400 volt Temperature-40°C/+200°C With pump2x Capacity18m²/h Motor5,5kW, 400/690Volt, (EX) MaterialStainless steel 1.4571 (316Ti) General TypeTR 400 HK/HK-EX Mach.No.HKS08026 Year of construction2008 Floorspace1,75x1,0 m Total height2,50 m Weight1800 kg ATEX designedcheckGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalGreen FridayRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsTemperature control unitsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarDairyLubricants & oleoAnimal feedO ...

General SKU360U942 MakeGPI LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1960 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel Capacity1960 Ltr. (max. 2000 Ltr.) Vessel sizesdia. 1450x1700 mm Dished topcheck Dished bottomcheck Manholecheck Top connectionsDN65, 1 ½ in, 2 in, 2 ½ in, 3 in Outlet2 ½ in Max. temperature125 °C MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) General No.290259-10 / 380T003 Year of construction2010 Mounted on legs4 With switchgear(as is) Floorspace1,5x1,5 m Total height2,2 m Weight800 kg Extra information with UV disinfection system: WEDECO ME150-PH Generic medicinesFine chemicalsPressure vesselsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersOther pharmac ...

General SKU394U1112 LocationBarneveld CEcheck MakeLauda Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit Temperating machinecheck Heating medium:Therminol D12 Electric capacity12,9 kW, 400 volt (Ex) Temperature-40°C/+200°C With pump(2x) Capacity18m²/h Motor5,5kW, 400/690 Volt, 2880rpm (EX) (2x) MaterialStainless steel 1.4571 (316Ti) General TypeTR400 HK/KT-EX Mach.No.HSK08023 Year of construction2008 With switchcheck Floorspace1,75x1,0 m Total height2,50 m Weight1800 kg ATEX designedcheckGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalGreen FridayRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsTemperature control unitsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-wa ...

General SKU259T443 MakeLock inspection system LTD TypeMetalchek 30+ No.7001 Year of construction2001 Mounted on framecheck Main Features MaterialStainless steel Specified Features - Metal detector Metal detectorcheck Tunnel sizes95x38x225 mm Product space95x38 mm With motorcheck With hoppercheck Inlet95x38 mm Outlet95x38 mm MaterialStainless steel 1.4404 (316L) General LocationBarneveld Mounted on wheelscheck Floorspace0,8x0,9 m Total height1,3 m Weight235 kg CEcheck Extra SpecificationsPharma Technology, tablet deduster, type combi 1200 li,inlet height 730-830 mm,outlet height 1490-1590 mm,Outlet chute diameter 60 mmTablet size diameter 4-25 mmcapacity: 150 000-2 000 000 tabs/hMirror finishGeneric medicinesOintmentsTea, herbs & coffeeStarchBiotechnologySpicesMetal detectorsFeed additivesOther pharmaceuticsCosmeticsFood additivesSugarDairyAnimal feedOther feedCo ...

General SKU394U1115 LocationBarneveld CEcheck MakeLauda Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit Heating medium:Therminol D12 Electric capacity12.9 kW, 400 volt (ex) Temperature-40°C/+200°C With pump(2x) Capacity18m²/h Motor5,5kW, 400/690 Volt, 2880 rpm (EX) (2x) MaterialStainless steel 1.4571 (316Ti) General TypeTR400 HK/KT-EX Mach.No.HKS08021 Year of construction2008 Floorspace1,75x1,0 m Total height2,50 m Weight1800 kg ATEX designedcheckGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalGreen FridayRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsTemperature control unitsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarDairyLubrican ...

General SKU329T1340 MakeDec LocationBarneveld CEcheck TypeDrum sealing cover Main Features MaterialStainless steel Number of1 heads Specified Features - Powder filler MaterialGlass, Stainless steel 1.4435 (316L) General No.DSC-130 Year of construction2016 Mounted in framecheck Floorspace0,79x1,32 m Total height2,9 m Weight400 kg ATEX designedcheck Extra information With powderbox, Dia:500x200mm lifting column stroke 320mm balancer cap. 7,5-11,5 kg suction lance DN40 triclamp x approx 1500mm cip connection Stäubli R 1/4” hub 2000mm, Magnehelic box Bizerba weighing scale, type ST-D-Z2, (Ex) Dec powder transfer system, type PTS 80-N cap. 500l/h temp range max 100°C pressure -50/+50 PED class Gas 2/ Art. 3.3, consumption 5 Nm3/h (stickstoff) at 3 bar, product input DN 32 Triclamp, product output DN80 PN10, pneumatic control, dim. 600x380x210 mm, roll conveyor, dim. 8 ...

General SKU394U1133 LocationBarneveld CEcheck MakeLauda Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit Temperating machinecheck Thermal oil heaterTherminol D12 Heating medium:Oil Heating capacity-40°C/+200°C Electric capacity12,9 kW, 400 volt (ex) With pump(2x) Motor5,5 kW, 400 volt, 2880 (EX) MaterialStainless steel 1.4571 (316Ti) General TypeTR400 HKT/KT-EX Mach.No.HKS08031 Year of construction2008 Floorspace1,75x1,0 m Total height2,45 m Weight1800 kg ATEX designedcheckGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalGreen FridayRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsTemperature control unitsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood a ...

General SKU269W394 LocationBarneveld CEcheck MakeSatorius Stedim Systems Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Silo Silocheck Closedcheck Capacity500 l Sizes800 x1200 x 1200 mm Flat topcheck With covercheck MaterialStainless steel 1.4307 (304L) General TypeFXC106609 Year of construction2021 Mounted on framecheck Mounted on wheelscheck Floorspace0,8 x 1,2 m Total height1,2 m Weight200 kg Extra SpecificationsNew, unused item.The item is delivered in its original packaging (kit).OintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSilosDetergent & surf.SugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicPowdered foodsPaints & coatingsSartorius Stedim SystemsIndustries > Pharmaceutical > OintmentsIndustries > Chemical > Fine chemicalsIndustries > Food & Feed  ...

General SKU349U1124 LocationBarneveld CEcheck MakeLauda Pressure Working pressure16 Bar Main Features Heating (medium)Oil Capacity12.9 KW Temp.200 °C Specified Features - Temperature control unit Thermal oil heaterTherminol D12 Water heaterwater/glycol Heating medium:oil/water/glycol Electric capacity12,9kW, 400Volt (EX) Temperature-40°C/+200°C With pump(2x) Capacity18 m³/h Motor5,5 kW, 400/690 volt, 2925 rpm (EX) (2x) MaterialStainless steel 1.4571 (316Ti) General TypeTR 400 HK-Ex Mach.No.HKS0836 Year of construction2008 Mounted on framecheck Floorspace2.20x1,0 m Total height2,30 m Weight1600 kg ATEX designedcheck Extra information Extra SpecificationsThis Lauda is equipped with a heat exchanger. Brand: Merck Built by: Herbst Maschinenfabrik GmbH Factory number: 08-12583-26/2 Material: 1.4571, Stainless Steel 316TI Jacket data, pressure: -1/+16bar, te ...

General SKU269W393 LocationBarneveld CEcheck MakeSatorius Stedim Systems Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Silo Silocheck Closedcheck Capacity500 l Sizes800 x1200 x 1200 mm Flat topcheck With covercheck MaterialStainless steel 1.4307 (304L) General TypeFXC106609 Year of construction2021 Mounted on framecheck Mounted on wheelscheck Floorspace0,8 x 1,2 m Total height1,2 m Weight200 kg Extra SpecificationsNew, unused item.The item is delivered in its original packaging (kit).OintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSilosDetergent & surf.SugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicPowdered foodsPaints & coatingsSartorius Stedim SystemsIndustries > Pharmaceutical > OintmentsIndustries > Chemical > Fine chemicalsIndustries > Food & Feed  ...

General SKU204W038 MakeSIHI TypeDRYA 160010 GT Mach.No.050 1E S PW Year of construction2005 Pressure Working pressure0.01 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume70000 Ltr. Motor6 KW Specified Features - Vacuum pump Pumpcheck Number of pumps:1 Capacity70 m³/h With motor6 kW, 400 volt, (Ex) InletDN50 OutletDN50 MaterialMild steel General Mounted on framecheck LocationBarneveld With switchgear(as is) Floorspace1,40x0,80 m Total height1,75 m Weight750 kg CEcheck ATEX designedcheck Extra Specificationsthis machine will be sold as as is”With Vahterus heatexchanger, volume 1,8 l., pressure -1/12 bar, test pressure 18,8 bar, allowable temperature 0°C/200°C, jacket, volume 3 l., pressure-1/12 bar, test pressure 18,8 bar, allowable temperature 0°C/200°C,ATB centrifugal pump, (Ex), cool liquid tank, flow valves,&:nbsp:Generic medic ...

General SKU269W392 LocationBarneveld CEcheck MakeSatorius Stedim Systems Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Silo Silocheck Closedcheck Capacity500 l Sizes800 x1200 x 1200 mm Flat topcheck With covercheck MaterialStainless steel 1.4307 (304L) General TypeFXC106609 Year of construction2021 Mounted on framecheck Mounted on wheelscheck Floorspace0,8 x 1,2 m Total height1,2 m Weight200 kg Extra SpecificationsNew, unused item.The item is delivered in its original packaging (kit).OintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSilosDetergent & surf.SugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicPowdered foodsPaints & coatingsSartorius Stedim SystemsIndustries > Pharmaceutical > OintmentsIndustries > Chemical > Fine chemicalsIndustries > Food & Feed  ...

General SKU235W256 MakeLeffek TypeWWCU-PHE 40-76/750 No.497-07 Year of construction2008 LocationBarneveld Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel General Floor space2,1 x 2,5 m Total height2,2 m Weight2720 kg CEcheck Extra information Water-Water Cooling Unit (WWCU) with   - deionised water circuit (including two deionisation pressure filters, 2 x 18 l/h)   - heat exchanger   - industrial water circuit   - pumps   - control cabinet and full documentation Generic medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarDairyLubricants & oleoAnimal feedOther feedConfectionerySolid pharmaceuti ...

General SKU269W391 LocationBarneveld CEcheck MakeSatorius Stedim Systems Main Features MaterialStainless steel Volume500 Ltr. Specified Features - Silo Silocheck Closedcheck Capacity500 l Sizes800 x1200 x 1200 mm Flat topcheck With covercheck MaterialStainless steel 1.4307 (304L) General TypeFXC106609 Year of construction2021 Mounted on framecheck Mounted on wheelscheck Floorspace0,8 x 1,2 m Total height1,2 m Weight200 kg Extra SpecificationsNew, unused item.The item is delivered in its original packaging (kit).OintmentsFine chemicalsStarchRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSilosDetergent & surf.SugarAnimal feedOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicPowdered foodsPaints & coatingsSartorius Stedim SystemsIndustries > Pharmaceutical > OintmentsIndustries > Chemical > Fine chemicalsIndustries > Food & Feed  ...