automatic storage system used for sale

Bread roll line Lippelt Mini Rustica Touch GST Suitable for making ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of Make: 2019 Condition: tested & cleaned Stainless steel cover Touchscreen control with recipe management With guillotine and die-cutter Seeder station, type: Rumo 7 Incl. 3 cutting rollers (1-4 row production) Incl. 2 stamping moulds Other accessories on request

Features: 1) KUKA KR 30 HA industrial robot, max. reach: 2033mm, rated payload: 30kg, max. additional load arm + wrist: 35kg, max. total load: 65kg, number of axes: 6, position repeatability: +/-0.05mm, path repeatability: +/-0.16mm, operating temperature: 10-55°C, protection class: IP64, IP65 (central hand), connected load: 7.3kVA, robot installation area: 850x950mm, weight: 665kg, 2) Trumpf TruDisk 8002 (6000) laser source, connected load: 39/40kVA, laser type: ND:YAG laser, weight: 2t, 3) KLH L 36.HL22 cooling unit, rated voltage: 3x 400V, refrigerant: R407c, refrigerant charge: 18kg, permissible operating pressure: 25bar, max. operating current: 31A, 4) filter unit. An on-site inspection is possible.

König Artisan SFC bread roll line Year of Make: 2013 Condition: functional, bakery condition Suitable for making ciabatta and square buns Hourly output: max. 300 kg dough Dough sheet height: min./ max. 12mm/ 32mm, dough dependent Dough belt width: 170 mm Dough Tape Flour for Top and Bottom Guillotine and punch for high product variety Touch panel with recipe management Poppy seed with water bath, type: MOC-C300 Incl. 3 cutting rollers for 1 to 4 rows of operation Incl. 1 punching tool of your choice, subject to availability

Bread roll line König Eco Twin 800 Year of Make: 2008 Head Machine, Type: Classic Rex T6S Stamp size SK58: 30 to 80 g 800 mm version: 6-/5-row working method Max. hourly output (proofer): 5040 pieces Max. hourly output (head machine): 9000 pieces With direct deduction for production without proofer operation High product variety thanks to interchangeable plunging tools and cutting station Long-knit station For the production of the following products: round, round-stamped or long-rolled, long-rolled-cut or long-rolled-pressed Incl. 1x cutting station, 1x plunger tool of your choice, according to

Roll line WP Multimatic MUS Rollmeister SC 51 Year of Make: 2009 Suitable for sliced rolls, round rolls and long rolls Max. hourly output: approx. 5,100 pieces Weight range (without fermentation): 30-90g Weight range (cut bun): 40-65g Pre-proofer I (before long rolling): 6 min Pre-proofer II (after long roller until cutting): 6 min Multimatic MUS 4-row dough dividing and rounding machine Pressure roller on spreader belts after the head machine Long-knit station Pressure roller in front of cutting station, height-adjustable Cutting station Bypass for green operation without proofer Depositing device for

Bread roll line WP Kemper Quadro Filius Year of Make: 2012 Weight range: approx. 25 to 360 g 1 to 6 rows of operation (depending on the cutting rollers) TA up to 180 Output approx. 1,400 to 4,000 pcs/h Max. 320 kg dough/h Dimensions LxWxH: 271 x 75 x 180 cm Power requirement: 230 V Compressed air 6-8 bar Incl. 1x cutting roller (3-row), 1x punch

Screen PlateRite 4300E, Year 2008 only approx. 20K plates done RIP York Workflow Inlinepunch 425 Azura C95 Clean out unit Available: at short term

Bread roll line König Basic Rex II Combiline 600 Year of Make: 2008 Condition: Currently under maintenance, pictures before maintenance For the production of round, oval, punched, elongated and flat products from wheat dough, mixed Swiss dough, cereal or fine yeast dough Suitable for shaped buns, elongated buns, etc. Working width: 600 mm Max. hourly output: 7,500 pieces (5 rows) Max. hourly output: 4,500 pieces (3 rows, for elongated pasta) Weight range: 35-85 g Dough divider and rounder, type Basic Rex II, 5 rows Long knitting board in front of proofer Proofer with

Bread roll line Lippelt Mini Rustica Touch GST Suitable for making ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of Make: 2022 Condition: tested & cleaned Stainless steel cover Touchscreen control with recipe management With guillotine and die-cutter Seeder station, type: Rumo 7 Incl. 3 cutting rollers (1-4 row production) Incl. 2 stamping moulds Other accessories on request

Bread roll line König Mini Rex G2000 Year of Make: 2008 Compact system G2000 with Mini Rex Futura head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex, swing-out, up to max. 4,000 pieces/h Weight range: 35-85 g Stamp size: SKG58 and RK58 Stamps for round and square rolls Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter

Manufacturer: Bous Model: 4765/30 WT System Name: Trowamat Year of Manufacture: 2013 Usable Chamber Dimensions : 470 x 650 x 300 mm Maximum Load per Basket: 100 kg Maximum Workpiece Length: up to 550 mm Tank 1 pH Range: 7 to 11 Tank 1 Fill Volume: 500 L Tank 1 Temperature: 70 degrees C Tank 1 Heating Power: 18 kW Extraction: 0.18 kW / 108 mm diameter Drying Power: 11 kW Compressed Air: 6 bar Voltage / Frequency: 230/400 V / 50 Hz Control Voltage: 24 V DC Total Current Draw: 82 A at 400 V Special Equipment: Loading Station , Oil Separator Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Turbo Clean Type of Machine : Parts cleaning machine Model : T10-400 Year of manufacture: 2007 Machine Weight: 550 kg Maximum Fill Volume: 18 L Maximum Load Weight: 15 kg Installed Power: 7.0 kW Mains Voltage / Frequency: 3 x 400 V / 50 Hz Pneumatic Connection: 6 bar Find more here - .ucymachines/ Contact us at - sales@ucymachines

Pallet circulation system for the production of Twin-Wall Panels and Filigree Floor Slabs comprising: 56 pallets; length = 10.00 m, width = 3.00 m Longitudinal and transverse transport systems for the pallets Stacker crane for storing and retrieving the pallets Curing chamber with 50 storage spaces 1 tilting station at the demoulding station Stacking areas with transfer trolleys Transfer trolleys for horizontal and vertical precast elements Automatic concrete distributor (built in 2018) Turning device for the production of double walls Beckhoff control system 2 laser plotters, from Z-Laser Steel processing PROGRESS: Straightening and cutting system, Progress MSR2/16 with positioning device for the steel of a complete pallet – plotter by Z-Laser Lattice girder cutting system for wall girders Spare parts for electrical/control systems, spare parts for mechanical c ...

Belt width gross: 1060 mm, Belt width nett: 1015 mm, Tiers: 36 pcs., Product gap: 65 mm, Link height: 80 mm, Belt length: 738 m, Infeed height: 925 mm, Outfeed height: 4120 mm, Refrigerant: NH3/Ammonia, Cooling power: 640 kW, Evaporator: 4000 m2, Power: 3 x 400V, 50Hz, 92kW, Dimensions: 11020 x 8300 x 5100 mm

The Florin Mini Compact Dryer is a compact drying system for applications where residual moisture must be removed or products must be blown off specifically. The system was developed as an energy-efficient alternative to classic compressed-air blow-offs and operates without a compressed-air supply., Typical application areas are blowing off coded surfaces before labeling, removal of residual moisture after washing or filling processes, drying of closures, cap feeding, and ejection of empty bottles. The compact design allows the system to be integrated into existing production lines even in confined spaces., With a power consumption of up to 180 watts and an air flow rate of 52 m³/h, the Mini Compact Dryer offers an energy-efficient solution for numerous applications in the beverage, food, and packaging industries. The IP67 protection rating enables use in demanding production environmen ...

Metal detection system MesutroncType Metron 05 CO 900 incl. conveyor belt Year of manufacture 2011. Metal detection coil diameter 900 mm, incl. durit tube. Belt conveyor length approx. 7,100 mm, with tapered roller

Compressor system consisting of 2 compressors + 2 air dryers professionally installed in two adjacent containers. 2 x Manufacturer: Kaeser Type BSD 83 Year of construction 2016 Operating hours approx. 14,950 hours Rated power 45 kW Operating overpressure 12.0 bar 2x air dryer Manufacturer: Mark Type MDX 15000 Conatiner Overseas 2 pieces standing next to each other Total dimensions approx.: Width 5m, Height 2.8m, Length 6m Weight estimated (total weight) 10to

ago congelo Chiller 130 -8 26 95 82 absorption chiller from 2015, was used as a chiller for a 372 KW CHP plant. unit with control, Ammonia 370 kg, water 290 kg, 16 bar, 680 KW recooling capacity Manufacturer: AGO AG Energie + Anlagen Model No.: ago congelo 130 -8 26 95 82 Serial Number: 62669 Heating capacity [KW]: 500 Cooling capacity summer [KW]: 180 Cooling capacity winter [KW]: 235 Recooling capacity [KW]: 680 Flow rate [m3/h]: 34,09 Type: Absorption Refrigeration System Refrigerant: ammonia, 370 kg Solvent: Water, 290 kg Pressure [bar]: 16 bar Year of Make: 2015 Weight [kg]: 5,000 Dimensions LxWxH [cm]: 5.35 x 2.55 x 3.50

Belt width gross: 965 mm, Belt width net: 905 mm, Belt length: 737 m, Belt surface: 600 m2, Tiers: 37.5 pcs., Product gap: 55 mm, Capacity: 2300 kg/hr (ready meals), Infeed height: 900 mm, Infeed length: 2640 mm, Outfeed height: 6300 mm, Refrigerant: R717, ammonia, Cooling power: 325 kW, Power: 3 x 400V, 50Hz, 67kW, Dimensions: 13840 x 7800 x 7300 mm

KOMPAKT” RELEASE AGENT MIXING SYSTEM Machine type: Mobile release agent mixing system Model: Aquapresso ADF 18.10 Operating pressure / release agent pressure: 6 bar Power: 1.5 kW Control voltage: 24 V DC Rated voltage: 240 V AC Rated current: 6 AControl system: Siemens Simatic HMI Features Compact, mobile design Stainless steel mixing tank with 100 l capacity Flow measurement for water and release agent Fully flow-through pressure accumulatorSpecial features: The mobile Kompakt” release agent mixing system allows the water-to-release agent mixing ratio to be set and monitored via the PLC control system. The mixing ratio is continuously monitored using volume sensors for water and release agent concentrate. Thanks to its compact design and integrated 100-liter stainless steel tank, the system is particularly suitable for flexible industrial applications. Lot No. 4 Item  ...

Belt width gross: 760 mm, Belt width nett: 715 mm, Tiers: 43 pcs., Product gap: 105 mm, Link height: 120 mm, Belt length: 563 m, Infeed height: 6000 mm, Outfeed height: 740 mm, Refrigerant: R717/NH3/ammonia, Evaporator: 3100 m2, Cooling power: max. 496 kW, Power: 3 x 400V, 50Hz, 38,5kW, Dimensions: 8850 x 4800 x 7000 mm

Descending spiral, infeed at the top, outfeed at the bottom, Belt width gross: 920 mm, Belt width nett: 880 mm, Tiers: 23 pcs., Link height: 80 mm, Product gap: 65 mm, Length per tier: 17.8 m, Belt length: 409 m, Refrigerant: NH3, ammonia, Evaporator size: 1800 m2, 975 L, Cooling power: 250 kW, Power: 3 x 400V, 50Hz, 64 kW

Stainless steel floor, central lubrication system, Belt width gross: 1060 mm, Belt width nett: 1015 mm, Tiers: 40 pcs., Link height: 80 mm, Product gap: 65 mm, Belt length: 820 m, Max belt load: 18 kg/m2, Infeed height: 925 mm, Outfeed height: 4500 mm, Refrigerant: nh3, ammonia, Cooling power: 400 kW, Evaporator surface: 4000 m2, Power: 3 x 400V, 50Hz, 92kW, Dimensions: 13050 x 9450 x 5300 mm

- Compact bread roll line - Manufacturer: Werner & Pfleiderer Lebensmitteltechnik - Type: Rollprofi - Suitable for the production of cut rolls, long-rolled rolls - 4 rows - Hourly output for 4 rows: 3750 pieces /h - Pre-proofing time: 6 minutes - Pre-proofing time between input and side discharge belt and 2000 pieces per piece - Pre-proofing time for double cut: 3 minutes - Pre-proofing time between input 6 minutes and long scooters: at max. power - Year of construction 2018 - Outer dimensions: Width: 305cm Depth: 115cm

used compact bread roll line König Eco Twin 9000 K6-SCHN6/B Classic Rex immediately available in stock for sale. -6-row roll line -König Eco Twin 9000 K6-SCHN/B Classic -with King Classic Rex head machine - Max. hourly output: -Year of construction 2011

ALPHA LASER ALM 300 laser welding machine was built in 2019 in Germany by ALPHA LASER GmbH. The machine is used for the precision welding of workpieces that require high accuracy, i.e. moulds, dies, tools and machine parts. The process involves spot fusing of the material by means of a concentrated laser beam with high energy density. This solution makes it possible to obtain highly accurate and robust welds with reduced thermal distortion at the same time. ALPHA LASER ALM 300 is equipped with a movable work head, which enables convenient operation even in hard-to-reach areas of the workpiece. The operator controls its position in the X,Y,Z axis by means of a joystick located on the machine arm. The welding process parameters are entered from the membrane keyboard panel or by means of a multifunctional foot switch control. The ALPHA LASER ALM laser beam welding machine weighs approxim ...

A Behn bag filling machine for powder and flakes is available. Accuracy class: Gkl X(1), filling material: resin powder, verification: 2019, filling principle: screw filling, filling nozzle diameter: 60mm, weighing range: 2kg-32kg, scale interval: 20g, inlet diameter: 350mm, flange diameter: 520mm, machine weight: approx. 1000kg. The control system of the machine has been overhauled. Including approx. 4000 bags and spare parts for the control system. An on-site inspection is possible.

A Haver & Boecker bagging system for valve bags with a turbine system for powdered bulk materials is available. Weighing system: gross weighing, filling material: phenolic resin, bag layers: 2-4, filling weight range: 25kg-30kg, filling capacity: approx. 150-175bags/h, explosion protection class: EEx de II C T6, pack silo height: 800mm, load cell: Z3H2-A, certification valid until 2026. Documentation available. An on-site inspection is possible.

ECKERT ONYX CNC plasma cutting machine with Kjellberg Q1500 and Dual Flex 3D For sale is a high-quality CNC plasma cutting machine ECKERT ONYX with a working range of 2,500 × 2,000 mm and additional raceway extension. The system is equipped with a powerful Kjellberg Q1500 plasma source, automatic gas console, Dual Flex 3D bevel head, Donaldson extraction and Finest Cut V7.1 CAD/CAM software. The machine enables precise plasma cutting as well as automatic 3D bevel cutting for weld preparation. Thanks to automatic gas management, modern control technology and extensive safety equipment, the plant is ideal for steel construction, mechanical engineering, container construction and contract manufacturing. Highlights: Working range 2,500 × 2,000 mm Kjellberg Q1500 Plasma System Dual Flex 3D Bevel Cutting Head Donaldson Suction DFPRE 6 Cyclopeel 6300 Automatic gas console Fin ...

Primus head machine, 4 to 6 rows Hourly output : approx. 7200 lt. manufacturer depending on weight. Realistic hourly output 6,000 pieces Weight range: 40-100gr The Kövy KA 1/6 is a high-performance, six-row sliced roll line for artisanal bakeries, which is traditionally often combined with a Fortuna head machine (KM 6). It processes dough pieces precisely—often in the weight range of 40 g to 110 g—and is particularly known for its wide variety of products (from classic sliced rolls to stamp and pointed rolls). Item condition: in operation, fully functional Availability: immediately Viewing: by arrangement Original price in 2022: €400,000.00

Condition: used,Remarks: Manufacturer: Sera Type: Suction lance SL-02 Length: 1000 mm Immersion depth: 980 mm Volume flow: 200 l/h Manufacturer: Sera Type: Diaphragm Transfer Pump Power: 0.37 kW Volume flow: 120 l/h Permissible back pressure: 8 bar incl. digital level scale

Little used mixed cable recycling plant. Workshop tested with 12 months used equipment warranty. Insertion by hand directly into the shaft or automatically via a controlled conveyor belt. Also pre-equipped for networking with a pre-shredder. Three-blade rotor system, for higher hourly output. Pre-equipped cooling of the cutting unit. Clean copper granules by inverter-controlled separator. Immediately available. The machine can be viewed and tested. more information at Recyclinganlagen.info

As good as new cable pelletizing system for mixing cables up to approx. 120 kg/hour. Demo machine from stock with 24 months warranty. Insertion by hand directly into the shaft or automatically via a controlled conveyor belt. Also pre-equipped for networking with a pre-shredder. Three-blade rotor system, for higher hourly output. Pre-equipped cooling of the cutting unit. Clean copper granules by inverter-controlled separator. Immediately available. Pictures will follow. The machine can be viewed and tested. more information at Recyclinganlagen.info

Small cable recycling plant for 80 to 100 kg/hour. Built in 2012, workshop checked and tested. Only 6 kW connected load. 3-fold separator adjustment for clean copper granules immediately available. The facility can be visited and tested. More information at Recyclinganlagen.info

An Mimot SMD placement machine is available. Infeed height: 888mm, max. component dimensions X/Y: 55mm/55mm, max. component height: 10mm, placement accuracy at Sigma 4: 35µm, repeatability at Sigma 4: 10µm, angular accuracy at Sigma 4: 0.07°, placement rate according to IPC: approx. 14400components/h, min. PCB dimensions X/Y: 50mm/500mm, max. PCB dimensions X/Y: 380mm/400mm, PCB thickness range: 0.5mm-4mm, maintenance: 02/2025. Machine dimensions X/Y: approx. 3100mm/1100mm, weight: approx. 1850kg. Including an extensive feeder package. Documentation available. An on-site inspection is possible.

This 3-axis EROWA Robot Easy Automation was manufactured in 2007. It features a maximum load capacity of 1500 kg and a magazine plate with 6 positions per level. The machine has a Z-axis travel of 75 mm and an M-axis capable of 360° movement. If you are looking to get high-quality automation capabilities, consider the EROWA Robot Easy Automation system we have for sale. Contact us for further details.

FROGERAIS dosing turbine, Engine: Type B F 80 b: 0.96 kW, Turbine diameter (mm): 900, Turbine depth (mm): 630, Dimensions (mm): 1530x1250 H2600

A compact FIC/Rivacold chiller is available. Usable volume: 410l, cooling capacity: 33.7kW, compressor: S15-52Y, compressor power: 15HP, tank load capacity: 725kg, refrigerant: R404A, cooling tower water consumption: 9.3m³/h, cooling unit water consumption: 3.6m³/h, machine dimensions X/Y/Z: approx. 750mm/1600mm/1900mm. Documentation available. An on-site inspection is possible.

dimensions 820x540x70 capacity 1 to daylight 2337 mm

Inv. Num. : 9266 Type: DUAL BATCH 40 Producer: Ecoenerg Created: 2022 Parameters: Weight of one batch: 2 x 50 kg One cycle: 4-6 min

TECHNICAL DATA: Machine type: Four Side Seal, Transverse Zipper Sealed, Side Seal Pouch Making Machine Application: production of high-quality laminated flexible packaging pouches with zipper and punching options. PRODUCT TYPES: • Four side seal pouches • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3" and 6" Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Inst ...

A Bullmerwerk fabric spreading machine including a Wastema band knife cutting machine is available. 1) Bullmerwerk fabric spreading machine, ESV20-160, max. fabric width: 1800mm, table length range: approx. 9500mm-13500mm, table width range: approx. 1800mm-2000mm, max. ply length: approx. 11000mm. Year of manufacture: 1985. 2) Wastema band knife cutting machine, cutting height range: approx. 250mm-300mm, throat depth range: approx. 750mm-1270mm, band knife speed: approx. 16m/s, weight: approx. 300kg. 3) Rietschle SKG 226-2.02 vacuum unit, year of manufacture: 1984. The system including 3 pieces km Mack KS-AU-V, speed: 3000/3600 rpm. Inspection possible by arrangement.

Messer MultiTherm 4000Year of manuf. : 2020 ____________Description:Technical specificationsWorking surface:2000 mm x 15000 mmTotal width:5070 mmHeight:1980 mmequipment:-Global Control S with 15 colour touchscreen:-Joystick and handwheel for Global Control S panel:-Cooling for the control cabinet:-Laser diode:-Drives up to a maximum of 35 m/min. AC:-Heat shield without air cooling:-Runway for double-sided longitudinal drive HEB:-OmniFlow oxyfuel supply up to 70 m/h (gas flow control):-ALFA machine cutting torch (internal ignition):-Smartlifter 300:-SensoMat ARKI:-Full addressing of gases:-Light barriers:-Safety device for wheel housing (foot switch)

Oil cooler, air-oil cooler, heat exchanger unused. Manufacturer: SEW Type: OAC1 50-710 Year: 2020 Permissible. Temperature: 90 °C Capacity: 42 l Cooling capacity at 40°C air / 70 °C oil: 27.7 kW 380 V Pump KRACHT KF 50 68.2 l/min at 1500 rpm 4 kW Fans 1.1 kW 940 rpm Dimensions approx. 2100 x 1500 x 1200 mm Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Manufacturer: MYCRONIC Model: My600 JP Year of Manufacture: 2024 The MY600 represents the top of jet-printing technology, enabling precise and fast solder-paste deposition for demanding electronics manufacturing. The machine is ideal for modern production lines with high quality requirements. Holder Units Not included Ejector Not included Auto Repair YES Glue option/SMT adhesive Can be upgraded (ejector variant) High speed Can be upgraded Shared databases Yes Board indexing Can be upgraded Fine pitch Can be upgraded Software: Latest version, which can be installed during setup FLE or Jpcam FLE can be provided My Center Can be provided Find more here - .ucymachines/ Contact us at - sales@ucymachines

Laser system for particle size analysis Manufacturer: Mettler Toledo Type Lasentec_S400Q Consisting of: FBRM S400Q Control Station 2 pieces of probes PC with FBRM Control Interface Software Documentation including certificates, Software and various accessories FBRM® [Focused Beam Reflectance Measurement] is a quantitative real-time measurement that tracks the rate and degree of change in particles, particle structures, and droplets as they are actually present in the process. In-line FBRM measurement® allows engineers to quickly link the dynamics of the particle system to the processing conditions. Measure particles and droplets in real time DescriptionSample OD: 9.5 or 14mm Probe length: 91 or 206mm Drive: Electric Bearing: Mechanical Lab/Plant: Lab Field unit: Stand-alone Temperature range: -20 to 90°C (standard); -90 to 120°C (optional) Pressure: 10 bar (stan ...

€ 2950 net Diatomaceous earth filter from MAG, Made in Germany 3sqm, top condition. Filter area 3 sqm, horizontal screens, residual filtration, product pump. Complete with stainless steel dosing tank. Illuminated sight glasses, integrated agitator, adjustable dosing pump. Ready to use.

A complete PVD hard coating system including peripheral equipment is available. 1) PVD hard coating system Platit Pi111 Plus G3, year of manufacture: 2023, deposition process: ARC, cathodes: 2, targets: 2, max. coating diameter: 353mm, max. coating height: 498mm, max. load: 160kg, max. workpiece diameter: 355mm, machine dimensions X/Y/Z: approx. 1950mm/1600mm/2250mm, control system: Platit. 2) Screw compressor Almig F-Drive 22, year of manufacture: 2022, flow rate: 4.14m³/min, final pressure range: 5bar-13bar, motor power: 22kW. 3) Compressed air receiver OKS, year of manufacture: 2023, volume: 1000l, operating pressure min./max.: 0bar/11bar, test pressure: 16bar. 4) Blast cabinet MHG SMG50, year of manufacture: 2024. 5) Osmosis Pro water filtration unit. Documentation available. An on-site inspection is possible.

Including:, Goedhart BV evaporator, Type: LLK.s 411m², Year of construction: 2010, Capacity: 135 dm³, Refrigerant: NH3, Working pressure: 22 bar, Test pressure: 32 bar, Weight: 770 kg, Belt width nett: 940 mm, Tiers: 3, Belt length: 5800 mm, Power: 3 x 380V, 50Hz, 0.37kW, Dimensions: 7200 x 1400 x 2900 mm, Weight: 2850 kg

AGFA Avalon N 36-50 (Screen PT-R 24000 S) - VLF year 2013 size 2100 x 1600 mm plate processor G&J Quartz III 150 Bridge Stacker in stock