automatic storage system used for sale

- Tested and cleaned Bread roll system - For round or elongated products mobile Stainless steel clad digital control Working width 600mm consisting of: Head machine type K4 Weight range up to approx. 110gr Direct settling device for baking trays or proofing carriers with long-rolling station Trigger length adjustable 60/40 or 60/80 or 60/100cm

Key data: 190 mm, 190 mm, 250 mm

Trotec SpeedMarker 300 – Laser Marking Machine | YOC. 2021 | Laser new 2025 For sale is a Trotec SpeedMarker 300 in very good condition. The laser source was completely renewed at the end of 2025 – the machine is technically as good as new and ready for immediate use. Technical data: - Manufacturer: Trotec Laser - Model: SpeedMarker 300 - Year of construction: 2021 - Laser source: new (renewed at the end of 2025) - Marking software: SpeedMark - Cooling: Air-cooled - Included: Extraction system Areas of application: - Marking and engraving of metals (stainless steel, aluminum, brass, etc.) - Marking of industrial parts - Serial numbers, barcodes, logos, data matrix codes

Pallet circulation system for double walls and filigree ceilings - 56 pallets; L=10.00 m - W= 3.00 m - Longitudinal and transverse transport equipment - Storage and retrieval machine for storage and retrieval - Curing chamber - 1 tipping station - Stacking places - Exit car - Concrete spreader - Turning device - Control Fabr. Beckhoff - Steel processing Filzmoser

Pallet carousel system for filigree ceilings, Fabr. EBAWE = consisting of: - 52 pallets; L= 12.50, W.= 2.50 m - Longitudinal and longitudinal transport equipment - Stacker crane - Curing chamber - Stacking places - Exit car - Cleaning stations - Autom. Concrete spreader - Plotter - Steel processing

Manufacturer: BvL Model: Rotocleaner RC 1950 RW 2T Year of Manufacture: 2008 Type of Machine : Cleaning System Operating hours: approximately 18,505 hours Key Features - Dual-tank system: separate wash tank and rinse tank for superior cleaning results - Wash basket diagonal of 2319 mm, allowing cleaning of large and small components - Maximum usable length: 1545 mm - Maximum usable width: 1545 mm - Maximum usable height: 1000 mm - Load capacity: 750 daN (approximately 750 kg) - Operating voltage: 3 x 400 V, N+PE, 50 Hz Wash Tank Specifications - Tank capacity: 825 litres - Electric heating: 24 kW - Spray pressure: 4.5 bar - Wash pump: FHE 40-200/75 GLRD SiC/SiC-Viton, 7.5 kW - Level control: LIQUIFANT FTL 260 - Coarse filter: 2 mm - Detergent dosing: Membrandosierpumpe Alpha 1001 Rinse Tank Specifications - Tank capacity: 825 litres - Electric heating: 18 kW - Spray pressure: 3 ...

Boiler Polzenith 1.6 MW, built in 2007 Very well preserved combustion plant make Polzenith 1.6 MW heating capacity. Complete system included - Fuel stock. Steel construction with moving floor - Scraper conveyors - Beth electrostatic precipitator with electric cabinet - Chimney height approx. 12m - All flue gas lines - Complete with switchgear and hydraulic system System professionally dismantled immediately ready for loading.

CONTROLS   electronic controls DIMENSIONS / WEIGHTS   space requirements -left/right-: 3600 mm   space requirements -front/back-: 1500 mm   total height: 2800 mm   total weight approx.: 2000 kg never used (NEW) ! incl. Clean room - Perfect for high-precision cleaning of sensitive and complex components. - Ideal for optics, medical technology, precision mechanics, and micro-components. - Gentle ultrasonic fine cleaning for coated or delicate components. - Suitable for cleanrooms in applications with the highest purity standards. Manual loading of process tanks 1: Ultrasonic cleaning with heating to max. 60°C (68 l) 2: Fine rinsing process tank (68 l) with deionized water 3: Fine rinsing process tank (62 l) with deionized water Hot air dryer with heating to max. 110°C Manual emptying 5 transport baskets + 1 transport basket with rotation unit Dimensions: max. 300 mm x 250 mm  ...

Key data: 7500 m³/h, 4 kPa, 8 kW

TEKA Filtercube 4H Welding Fume Extraction with Siemens Control & Spark Trap (built in 2021) For sale is a high-quality TEKA Filtercube 4H welding fume extraction system including Siemens control and integrated spark trap. The facility is in very good, well-maintained condition and has been regularly professionally maintained. It was reliable in industrial use until the end. Technical data: Manufacturer: TEKA Model: Filtercube 4H Year of Make: 2021 Power: 7.5 kW Volume flow: 4,800 m³/h Negative pressure: 18 mbar (1.8 kPa) Control: Siemens Control Integrated spark trap Scope of delivery: TEKA Filtercube 4H extraction system Integrated spark trap Siemens Control Not included: Extraction arms Piping / Piping System Condition & Use: Very good, well-maintained condition Regularly serviced Fully functional and ready to use Ideal for industrial welding fume ...

A Bous spray cleaning system is available. Usable space dimensions X/Y/Z: 470mm/650mm/300mm, max. material weight: 100kg, filling quantity: 500l, max. temperature: 70°C, heating capacity: 18kW, exhaust connection diameter: 108mm, drying capacity: 11kW, weight: approx. 1600kg. Including loading station and oil separator. Documentation available. An on-site inspection is possible.

A complete Mixaco mixing system including an AZO multi-component weighing system is available. 1) AZO weighing system with an integrated scale on the hopper and an external precision scale. Media: 2, filling level query: available, interface: Mixaco, year of construction: 2009. 2) Mixaco mixing system, temperature control unit: available, mixing sequence: hot/cooling/trough, filling option: Big Bags/octabins. All units of this complete system were regularly maintained. Documentation available. An on-site inspection is possible.

Plasma cutting machine Microstep SPL-P 3001.15, built in 2011 Working area 1500x3000 mm, cuts steel, stainless steel and aluminum, incl. software, incl. plasma source Kjellberg HiFocus 161i with automatic gas console, pressure reducer and Extraction Donaldson Torit DCE for outdoor installation. Last major maintenance at the end of 2024 The plant has already been dismantled , loading is possible.

Year : 2001 Thermal stripping machine for cleaning parts covered with plastic, paint such as dies, nozzles, filters. The combustion chamber is heated to approximately 420 degrees. The metal parts to be cleaned are placed in a basket which is introduced into the preheated cleaning chamber. Perfect cleaning for a cycle time of 90 to 150 min. Dimensions of the cleaning chamber: diameter 220 mm and Length: 350 mm Dimensions of the basket : diameter 210 mm and length: 260 mm Dimensions (L x W x H) : 0,90m x 0,70m x 1,60m Weight : 120 kg

A Kodak thermal computer-to-print system with peripheral devices is available. Workflow: Prinergy EVO RTPO, laser wavelength: 830nm, imager sides: 6, cassette drawers: 3, punching heads: 4, max. plate dimensions X/Y/Z: 762mm/685mm/228mm, resolution: 3048dpi, screen ruling: 250lpi, repeat accuracy: +/-5µm, production capacity: approx. 17plates/h, max. cassette capacity: 180. System dimensions X/Y/Z: approx. 3350mm/1850mm/1850mm, weight: approx. 2000kg. Including a multi-cassette unit MCU U/G, 6-side thermal platesetter Magnus 400 II S, plate transport unit, plate stacker transfer, printing plate stacker 860, Kodak Compressor with Atlas GX2FF and washout unit with collecting tray Agfa Azura C 95. The autoloader has a suction problem with the printing plates. Documentation available. An on-site inspection is possible.

A hydraulic system, consisting of three identical power units and three identical hydraulic hammers including lines, is available. 1) 3x hydraulic power unit Atlas Copco LP 9-20 P, engine manufacturer: Honda, engine power: 6.7kW, fuel: gasoline, max. operating pressure: 150bar, return filter fineness: 25µm, machine dimensions X/Y/Z: approx. 650mm/550mm/650mm, weight: approx. 80kg. 2) 3x hydraulic, vibration-damped breakers Atlas Copco LH 190 E, year of manufacture: 2014, operating pressure range: 95bar-110bar, blow frequency: 1400/min, vibration value: approx. 5m/s², max. back pressure: 10bar, length: approx. 650mm, operating weight: 25kg. 3) Hydraulic hose lines. An on-site inspection is possible.

working direction: left-right

Carton erector Pextor Booster Carton sealer Glupex Handle applicator Flexrain Mapp VO3 Transport Fa. Federspiel Filling machine Rapak 1230 E Aseptic for 3 and 5 liters 10 liters should be hot-filled Aseptic filling machine for wine Capacity: 3 liters: 16 bags/min 5 liters: 15 bags/min 10 liters: 12 bags/min Running time: 5,800,000 cycles Year of construction of the complete line: 2005. The line is currently dismantled but can be inspected. Operated by 1 person.

Without compressors and insulated panels, Belt width: 1850 mm, Belt length: 18300 mm, Product gap: 85 mm, Refrigerant: NH3, R717, ammonia, Cooling power: 224 kW, Evaporator: 3 pcs. Raffel, 2266 m², Power: 3 x 400V, 50Hz, 55kW, Dimensions: 19800 x 3580 x 3450 mm

Cleaning medium: perchloroethylene, treatment chamber dimensions: 690x740x277mm, basket holder dimensions: 400x620x410mm, max. loading weight: 80kg, basket speed: 2-4/min, usable volume tank 1/2: 270/160l, solvent capacity: 450l, compressed air connection: 6bar, control: Siemens SIMATIC OP17, length: 2550mm, width: 1900mm, height: 2500mm, weight: 3.2t, with documentation. An inspection on site is possible.

Dough scoop with riser belt also possible for tubing • Dough funnel suitable for approx. 200kg dough • Funnel made entirely of plastic • Top edge hopper approx. 2050mm; Safety light curtains on top of the hopper. Attention: the lifting tipper should be set to at least 2,100mm dump! • Star knife for portioning the dough into Plastic • Oiling of the star knives: incl. • Oil tank: 19 liter stainless steel pressure tank, suitable in order to possibly add funnel lubrication afterwards. supply. • Funnel lubrication can be retrofitted • Horizontal pick-up belt for the dough portions • The dough is divided between two parallel Conveyor belts handed over • Climbing angle of the conveyor belts approx. 70° • The upper band can be moved at a distance to the inlet and run. • The lower band merges into a horizontal piece of ribbon, which leads the dough  ...

Stacker - Belt width 900mm, - Separate frame, with sprinkling or Head machine connected by quick-release fastener - Mobile version - Setting stroke adjustable, suitable for 1 Trays 980 x 580 (occupancy: 10 x 6) ,2 proofing planks 45x65 (occupancy 3 x 5) or 1 tray 58x78 landscape (Beleguing 6x2 Doppelweck) - Detection of the dough pieces via light barrier - User-friendly control cabinet above the Attachment - User interface. Touch Screen - Incl. frame for paper support - Working direction: from left to right

Doppler and scattering station Task: Round-rolled pieces of dough should be doubled and then sprinkled Solution: The round-rolled pieces of dough are fed by a roller flattened and then run through a Immersion bath. After the immersion bath, the first piece tilted by 180°, the next one is tilted to the first Piece tipped on it. After that, the two pieces drive and are sprinkled from above. After sprinkling, another printing roller follows, which, on the one hand, attach the pieces of dough to each other and on the other hand, the sprinkling presses on the dough. Description: Flattening: Full-surface tape with above, height-adjustable roller. Roller driven. Humidification: Water bath with adjustable diving depth.

Manufacturer: Fraunhofer Model: HEIS Laser 1 Year of manufacture: 2023 Status: Fully operational CE certified: Yes Technical Specifications - Supply voltage: 3 x 400 VAC / 50 Hz - Fuse protection: 3 x 50 A - Rated current: 50 A - Laser wavelength: 9 to 12 micrometers - Laser average rated power: 450 W Hardware Components Included - Beckhoff control PC - Philips monitor - Laser source OEM 45 IX - Water-air cooler and cooling water system - Scanner IntelliSCAN 20 with VarioSCAN 40 - Beam guidance system - Air conditioning system - Cooling water system - Control panel Peripheral Equipment Included - ULT extraction and filter unit - Riedel Kooling chiller unit, Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Baublys Model: BL5000 G30 Sy / NC303030 Year of manufacture: 2020 Status: Fully operational CE certified: Yes Laser Specifications - Laser type: CO2 laser - Average laser power: 30 W - Laser class: 4 - Wavelength: 10.6 micrometers Technical Specifications - Operating voltage: 400 V / 50 Hz - Max. power consumption: 2.8 kVA - Fuse protection: 16 A - Connection: 5-pin CEE plug - Machine dimensions: 860 x 1,493 x 1,777 mm - Machine weight: approx. 465 kg Workpiece Capacity - Max. workpiece height: 300 mm - Working table size: 550 x 375 mm - Max. workpiece weight: 75 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

TECHNICAL DATA: 02 Motors: TX3 – 3 axles, equipped with HSK63E mount – chain magazine with 46 places TX5 – 5 axes (C ±270°, W ±120°), equipped with HSK63F mount – magazine with 24 slots Machinable workpiece length: max. 7000 mm Wood cross-section: max. 300 mm Machinable workpiece thickness: from 20 to 95 mm Loading buffer with 2 stations – simultaneous processing of 2 workpieces Videojet Laser Marking Liquid cooling for the spindles

Gericke PTA50 Pneumatic conveying system Stainless, Mobile pneumatic conveying and dosing system used in the food, chemical and pharma industries, working pressure 3.9Bar, volume 50L, with butterfly valve and actuator

Manufacturer: Carrier Model: 30HXC 200 Type: Industrial Screw Chiller Year of manufacture: 2001 Condition: Used TECHNICAL SPECIFICATIONS - Cooling capacity: 700 kW Find more here - .ucymachines/ Contact us at - sales@ucymachines

A tool presetting device is offered. Axes: 2 (X/Z), position display: EPA 3001 2-axis LED display, tool holder: SK steep taper, projection measuring head with sighting device, pneumatic tool clamping, integrated compressed air maintenance unit including pressure gauge, fine adjustment via handwheels, zero point storage, measured value hold function. Weight: approx. 95kg, overall dimensions X/Y/Z: approx. 600mm/550mm/1100mm. Inspection possible by arrangement.

Rollable chip extraction for aluminium or PVC

The shredding plant is equipped with two powerful bevel gear motors, delivering a combined total power of 60 kW (2 x 30 kW). The chamber length of the RedUnit XRL is 1600 mm, designed for extensive shredding tasks. With a speed of 42 min⁻¹, the machine operates efficiently and reliably., The power supply is 400 V AC at 50 Hz electrical frequency. The motors are of high quality and lacquered, meeting the latest standards (AGM4606.TF). The operating temperature range is from 0°C to +50°C, so the machine operates reliably under various climatic conditions., MODERN CONTROL AND AUTOMATION:, The crushing system features a fully automatic control with the PCU type SQF0050 and a Performance Control Unit (SQF0060). Operation is via a modern 10-inch touch panel that enables user-friendly operation and intuitive control. The system supports both automatic operation and manual hand operation.,  ...

Processes: nickel strike, alkaline/cyanide zinc plating, base material: steel, stainless steel, throughput capacity for racks: approx. 11/h, production time: operating time minus rack cycle time, drums per rack: 1, internal drum length: 870mm, width across flats: 350mm, average loading weight per drum: approx. 37kg, max. loading weight per drum: approx. 50kg, the loading weight depends on the geometric surface area of the parts, anode distance: 650mm (700mm for electrolytic degreasing), operating voltage: 3x 220/380V, 50Hz, Mp/SL (-15 to +10%), heating: electric, heating-up time: approx. 5h at an initial temperature of approx. 15°C, cooling: cooling water, supply: 8°C, return: 12°C, city water: 2bar, circulating water: 2bar, compressed air: 8bar, drive/control power: approx. 166kVA, rectifier power: approx. 240kVA, heating power: approx. 136kW, extracted air volume: cyan./alk. 12,000m ...

Offered is a tube laser cutting machine. Processing length X: 6500mm, workpiece diameter max.: 220mm, laser power: 3500W, beam source: CO2, power-on hours: 48817h, laser beam hours: 9403h, RF tube: renewed 01/2023. Equipped with bundle loader, unloading station, extraction system, cooling unit, annual manufacturer maintenance documented. Weight: approx. 9000kg, overall dimensions X/Y/Z: approx. 10500mm/4600mm/2200mm. Inspection possible by arrangement. Expected to be available starting October/November 2026.

This 4-axis Arburg Multilift Select 15kg quer was manufactured in 2015. It features an impressive X-axis travel of 700 mm, Y-axis travel of 1200 mm, and Z-axis travel of 2000 mm. If you are looking to get high-quality work piece handling capabilities, consider the Arburg Multilift Select 15kg quer machine we have for sale. Contact us for further details.

Bread roll line König Mini Rex G2000 Year of Make: 2002 Compact line G2000 with Mini Rex 4000 head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex, swing-out, up to max. 4,000 pieces/h Weight range: 35-85 g Stamp size: SK63 and RK58 Stamps for round and square rolls Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter

Bread roll line König Classic Rex Combiline 800 This system is currently still being repaired (pictures are from the bakery) Suitable for the production of round, oval and die-cut rolls as well as other stamped rolls Year of Make: 2008 Dough divider and rounder, type: Classic Rex T6 Proofer, Type: Combiline 800 Weight range: 45-100 g (stamp size: SK 61) Capacity: max. 9,000 pieces/h Pre-rolling for oval products before feeding into the proofer Proofer with air conditioning (temperature, humidity) side discharge belt for further production (e.g.: downstream

Bread Roll Line Combi WP Multimatic MUS Selecta Modular V60 Combi Year of Make: 2016 Condition: repaired, ready for immediate use Operating hours: 12,200 h Dough divider and rounder, type: Multimatic MUS 5-row 3/4/5-row, combined roll line for the production of shaped rolls and long rolls, sliced and uncut Working width: 600 mm Weight range: 35-85 g (piston diameter: 50 mm) Hourly output: 6000 pieces Fermentation time: 12 min Stamp unit for emperors, braids, pressed rolls, etc. Green operation without proofer with direct deduction possible (e.g. for Berliners) Performance

Brötchenanlage Lippelt Mini Rustica GS Suitable for making ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of Make: 2003 Condition: tested & cleaned Stainless steel cover With guillotine and die-cutter Incl. 3 cutting rollers (1-4 row production) Incl. 2 stamping moulds Other accessories on request

Refrigerant: R404A, Compressor: Danfoss Optyma, Power: 3 x 400V, 50Hz, 3.9kW, Dimensions: 800 x 1200 x 1500 mm

Bread roll line König Mini Rex G2000 Year of Make: 2004 Compact line G2000 with Mini Rex 4000 head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex, swing-out, up to max. 4,000 pieces/h Weight range: 35-85 g Stamp size: SKG58 and RK58 Stamps for round and square rolls Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter

WP Kemper Softstar Evolution Compact Bread Roll Maker Year of Make: 2013 Suitable for the production of round, elongated, cut or punched dough pieces (e.g. Berliners, cut rolls, after-work rolls, etc.) Max. hourly output (6 rows): approx. 12,000 pieces Weight range approx. 45-95g 6-row head machine with pre-portioner Blockable rows for e.g. 4-row production (sliced rolls) Touch control with program memory Incl. chamber drum for various weight ranges Proofer with air conditioning Long rolling unit with motorized upper belt  Punching unit incl.

Bread roll line WP Multimatic MUSG-4 Dough dividing and casting machine, for the production of round dough pieces 4-row head machine Manufacturer: Werner & Pfleiderer Type: Multimatic MUS-G Year of Make: 2010 Condition: used, repaired Weight range: 50-150g Hourly output: 2600 to 8000 pieces Digital control, with adjustable hourly output, operating speed, weight adjustment (motorized) Depositing device, for automatic filling of the dough pieces on baking trays Manufacturer: WP Kemper Type: AB Condition: used, repaired Working width: approx. 60

Fortuna Magnus S6 Profiline K bread roll line  Fortuna Magnus S6 dough divider and rounder, year of manufacture: 2018 6-row head machine Weight range 50 g to 140 g Proofer with heater and humidifier, year of construction: 2012 Green operation possible without proofer Long rolling station Cutting unit Punch unit Seed station with humidification for one-sided seeding Setting machine for baking trays or placing on conveyor belt for further processing possible More information, pictures and videos will follow...

Bread roll line König Mini Rex Futura G2000 Year of manufacture: 2018 Compact system G2000-K2 with Mini Rex Futura head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex Futura, swing-out, up to max. 4,000 pieces/h Stamps for round and square rolls Stamp size: SKG63 and RK64 Weight range: 40-105 g Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter

Trima K2 bread roll line with compact proofer G2-3 Suitable for round, long-rolled, folded and flattened products, e.g.: hamburger, hot dog, mini baguette Dough divider and rounder K2 (YOC 2014) Digital adjustment of weight adjustment, effective room height adjustment, effective speed and effective time Dough hopper capacity 25 kg with feed belts Flour for dough hoppers, moulding chambers and spreader belts Manual pressing pressure adjustment for different types of dough Weight range: 25-95g / 50-150g With footswitch Touchscreen control with recipe memory Power: max. 3,200

Bread roll line König Mini Rex G2000 Year of Make: 2002 Compact line G2000 with Mini Rex 4000 head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex, swing-out, up to max. 4,000 pieces/h Weight range: 35-85 g Stamp size: SK63 and RK58 Stamps for round and square rolls Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter

Brötchenanlage Lippelt Mini Rustica GS Suitable for making ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of Make: 2009 Condition: tested & cleaned Stainless steel cover With guillotine and die-cutter Seeder station, type: Rumo 6 Incl. 3 cutting rollers (1-4 row production) Incl. 2 stamping moulds Other accessories on request

Refrigerant: NH3, R717, Compressor: GEA Grasso PR-P55S-28, Flow rate: 966 m3/h, Working pressure: max 21 Bar, Power: 3 x 380V, 60Hz, 162kW, Dimensions: 5000 x 2200 x 2450 mm, Weight: 5400 kg

Bread roll line Lippelt Mini Rustica Touch GST Suitable for making ciabatta and corner/special rolls Dough throughput up to 300 kg per hour Year of Make: 2019 Condition: tested & cleaned Stainless steel cover Touchscreen control with recipe management With guillotine and die-cutter Seeder station, type: Rumo 7 Incl. 3 cutting rollers (1-4 row production) Incl. 2 stamping moulds Other accessories on request

Belt width: 710 mm, Length: 16000 mm, Refrigerant: N2 (liquid nitrogen), Power: 3 x 400 x 50Hz, 8kW, Dimensions: 17600 x 1500 x 2300 mm

König Artisan SFC bread roll line Year of manufacture: 2018 Condition: cleaned & tested Suitable for making ciabatta and square buns Hourly output: max. 300 kg dough Dough sheet height: min./ max. 12mm/ 32mm, dough dependent Dough belt width: 170 mm Dough Tape Flour for Top and Bottom Guillotine and punch for high product variety Touch panel with recipe management Poppy seed with water bath, type: MOC-C300 Incl. 3 cutting rollers for 1 to 4 rows of operation Incl. 1 punching tool of your choice, subject to availability

Bread roll line König Mini Rex G2000 Year of Make: 2005 Compact line G2000 with Mini Rex 4000 head machine Compact proofer with an hourly output of approx. 2,500 pieces For higher performance without proofer operation, Mini Rex, swing-out, up to max. 4,000 pieces/h Weight range: 35-85 g Stamp size: SKG58 and RK58 Stamps for round and square rolls Side discharge belt Proofing time approx. 6 min at a capacity of 2,000 pieces/h Stüberpting equipment incl. a stamping tool of your choice, subject to availability Integrated impact long scooter