automatic storage system used for sale

The detected defects from a camera system are transferred via an interface to the fault marking system, where a label is then placed as a marker on the side of the film roll. Project number 2010 / A8392 Rated voltage 230 V; 50 Hz Rated power 1 kW Dispensing speed 1-600 mm/s (depending on label size) Positioning speed 25-30 mm/s Thermal Transfer Printer

Process chiller / chiller air-cooled, Type: TAEevo Tech 802 P3-20 MTA S.p.A. TAEevo Tech 802 P3-20 are air-cooled compact water chillers suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, electronic injectors, buffer tank 678 ltr., built-in P3 circulation pump on the intake side and winter control (condenser pressure control -20°C). Cooling capacity kW 159 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 27.1 Available pump pressure (bar) 3.13 Ambient Temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 79.48 Max. Current (A) 142.2 Starting Current Circuit (A) 286.2 Protection class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2192 Connection Rp 3" Serial No.: 2200374246 Ye ...

FRASCOLD SA 210 BY / MCL 80 Brand:FRASCOLD, DELTA TECHNICS Type:SA 210 BY / MCL 80 Stock number:M21-6073 Cooling capacity:5.8 kW Number of fans:1 + 4 Fin spacing:6,35 mm Refrigerant:HFC Voltage:400 / 230 Volts Dimensions:706 x700 x 512 / 2250 x 700 x 250 mm Weight:65 + 59 kg Year:2004 Number in stock:1 piece(s) Price: Quotation request Description: Complete Frascold system with 1 piston compressor. Equipped with a Delta Technics evaporator (MCL 80) and an Eliwell ID 974 controller. Mentioned capacity at an evaporating temperature of -5°C and an ambient temperature of +32°C. Visit also our website: used-refrigeration

mobile heating system, central heating system, steam heating, land steam boiler system used STEAG / GVT Saarbrücken Boiler capacity: Steam 5 t/h Boiler manufacturer: BABCOCK / OMNICAL Boiler type: OMNIMAT Temp. max 190°C Pressure max 13 bar Boiler capacity 6080 l OIL / Gas Burner WALKER RGL50/2-A YOC:2004 5400 kW Gas type N Heat and soundproofed container 11 x 3.6 x 3.9 m Transport weight: approx. 30 t Operating weight approx. 44 t Electrical power requirement 25 kW The plant has not been in operation since 04.2020 and has been preserved dry.

Process cooling tower, air-cooled, Type: Cooling tower RAD 864/900 Cooling Tower, MTA S.p.A. - Rehsler RAD are compact water cooling towers that are suitable for outdoor installation. Including pump, water treatment for biocide and stabilizer and control and control cabinet. Cooling capacity kW 1113 Cold water temp. Exit/ Entry °C: 27 / 32 Volume flow m³/h: 192 Available Pump Pressure Bar: 3.27 Wet bulb temperature °C: 21, Air volume m³/h: 97200 Sound pressure in 10m free field dB(A): 64 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. current consumption (A) 125 Max. power consumption (kW) 86.6 Dimensions: Length mm 6600, width mm 2424, height mm 3180, Weight transport / operation kg: 4194 / 8449 Connection DN 150 FROM 9038 Year of construction 2020 Condition: Optical 1, Technical OK Test facility, as good as new Price: on reque ...

mobile heating system, central heating system, steam heating used STEAG / LOOS Boiler capacity: steam 3.2 t/h Boiler manufacturer: LOOS Boiler type: UHD 3200 Temp. max 190°C Pressure max 13 bar Boiler capacity 2650 l Burner WALKER D112/140-2 7.0 kW Heat and soundproofed container 9.2 x 3.6 x 3.6 m Transport weight: approx. 25t Operating weight approx. 30 t Electrical power requirement 25 kW Changes and errors in the technical data, information and prices as well as prior sale reserved.

Palletiser consisting of - Knorr packing line - Knorr automatic jogger with air removing roller - Bizerba ITS industrial sheet counting scale Knorr system for palletising counted sheet. Paper is counted by Bizerba paper scale, straightened and smoothened and in the jogger with air removing roller. Paper is picked-up positively with a pincer gripper system, transported and positioned accurately onto pallet. However, equipment can also be used as a performance-enhancing alternative to a paper lift for offloading your large sized guillotine, then left standing

Copeland compressor unit Type: D6DT5-320X-AWM/D (x4) Volume: 4 x 126.9 m3/h Cooling capacity: 220 kW przy -10°C/40°C, 56 kW przy -35°C/40°C Refrigerant: R404A Reference number: Z17 Pieces in stock: 1 Condition: Used Price on request, We have many other kealte plants and meat and fish processing machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Washer for efficient and gentle washing of ampoules, vials and bottles. Output: up to 2'500 vials/h. Machine comes with format parts for 5-, 10- and 20 ml vials.

Fortuna Viereck Ciabatta - Bread roll system Type: TM 4-row with flour spreader with sprinkler with seed storage with turntable with Spüher Hourly output approx. 3800 pieces Stainless steel version on rolls 380V 50Hz

Sorter for light loads, Optimus, SORTING SYSTEM OPTISORTER HORIZONTAL, 200 trays, 261 targets - used - : Price sorter incl. control, continuous roller conveyors and pick by light (without conveyor technology) from location: 99.500.-€ (net), incl. dismantling, packed and loaded! Price of the existing Transnorm conveyor technology (approx. 170m) incl. scanner and labeller: 15.000.-€ (net) incl. dismantling, packed and loaded! Manufacturer: Optimus Sorter Projects B.V. (Bowe Group) Type: OPTISORTER HORIZONTAL Year of Make: 2013 • UNIQUE PUSH TRAY TECHNOLOGY • GENTLE SORTING PROCESS • MODULAR DESIGN Control: Siemens S7 Layout: OS-680113-264-D01 System capacity: 6000 trays/h Total length of the system: 53 m Total width of the system: 14 m Number of infiltration stations: 1 Width of infiltration station: 2 m Number of trays: 200 pieces Usable size on the trays ...

ID3574 Monsuna AKS A4 year/Baujahr 2014 Tire washing system for commercial vehicles, Monsuna type AKS A4 series, including tank, control system, signaling system, and contact loop for automatic operation. The washing zone is fully galvanized. The water supply is fully integrated into the module frame. Passage zone: 4000 mm long x 3100 mm wide (clear passage width: 2900 mm). Weight: approx. 5,000 kg (2 washing modules, each with a capacity of 2,500 kg). Tank: 7000 mm long x 3000 mm wide. Weight (unfilled) approx. 3,560 kg. Tyre washing system for commercial vehicles Monsuna type AKS A4 incl. tank, control system, signalling system and contact loop for automatic operation, the washing zone is completely galvanised, water supply is completely integrated into the module frame, passage zone: 4000 mm long x 3100 mm wide (clear clearance width: 2900 mm), weight: approx. 5,000 kg (2 wash mod ...

Fortuna + Lippelt Bread Roll System Compact Fortuna Primus K4 Head Machine 4- Rows Weight range: 35 - 80 grams Volumetric lobe diameter: 64 with hardening plate Hourly output max.  5000 / piece Front + Rear + Roller Flourer 2x working speed (slow + fast) Siemens Simatic Touch Panel Control Rev. 2010 Machine volume max. 70dB Weight head machine: 600kg Lippelt fermentation cabinet Type: G 8000 L/R Year of construction 2014 Operable from 4 to 6 rows (depending on the head machine) Number of hours per head machine from 5000 - 8000 pieces with punching station for round and long rolled dough pieces  4x punching with cutting device punch Cutting strength adjustable with stamp station with direct setting on 58x78cm & 58x98cm sheets with settling tape Special fermentation carriers without mould accumulation Siemens Touch Panel Color Screen incl. accessories on  ...

I sell the Fensterbau cone cutting and slotting system Weinig Unitec 10. Year of construction 1998. Milling heads OERTLI. Available the same. Unit price 5.500 euro. 3 pcs. available. Condition very good !

for sale chocolate tanks Capacity 1000 liters and 2000 liters. Heating jacket Stirrer for thick chocolate mass I send photos at the client's request

For sale is a fully automatic cleaning and disinfection system of the type Expert 100 / T from the manufacturer Melksysteme Niedersachsen (NISA). The system is ideal for daily cleaning of milking equipment and milk lines on farms. It takes over all dishwashing, disinfection and control functions fully automatically. Specifications: Manufacturer: Melksysteme Niedersachsen (NISA) Model: Expert 100/T Function: Automatic cleaning & disinfection of milking systems Control functions: start/stop, washing programs, temperature control Flushing: Pre-, main and post-flush programmable Power supply: 230 V / 50 Hz (standard connection) Condition: used, cleaned, tested

I sell the window construction kit: 1 pcs. cone cutting and slotting system Weinig Unitec 10. 1 pcs. profile automatic converter center Weinig Univar 10. Year of construction 1998. Milling heads OERTLI. Available the same. Price together 10,000 euros. Condition very good !

RMS Vibration Vibration Test System Here we offer you an RMS Electrodynamic Vibration Vibration Test System. RMS Vibration Vibration Test System Test Manager SWR 900 Vibration exciter SW 3006 30V-50A-3434 N Power amplifier TGA 3000-000.00 Condition: used Unchecked! Tests were not possible Scope of delivery: (See picture) (Changes and errors in the technical data, information reserved!) We are happy to answer any further questions you may have on the phone. Written order possible by email or fax

SynenTec Cellavista V 3.1 Cell Imager Manufacturer: SynenTec Model: Cellavista V 3.1 Resolution: Up to 0.35 μm at 40x magnification Magnification options: 2x, 4x, 10x, 20x, 40x Illumination: Brightfield and up to 6 fluorescence channels Camera: 8-bit progressive scan CMOS with a pixel density of 5440 x 5440 (29.6 MP) Sample Types: Supports SBS standard plate formats (6, 12, 24, 48, 96, 384 wells), culture dishes, and microscope slides Throughput: Can expose up to 250 plates per day Automation: Fully automated with options for integration into robot systems Voltage (U): 100 – 240 V AC 50/60 Hz Power (P): 295 VA max Created: 01/2011 More items - new and used - can be found in our shop! International shipping costs on request!

- According to layout bottle transporters - According to layout carton transporter - With central control

SPECIFICATIONS: Machining max mm: 330 Ø mm: 40 Computer-aided measuring and displaying system for Measurement of tools, digital display of tool data Input of profile dimensions, calculation of spindle setting data Transfer to the machine by means of a label

see performance data on photo with data

Ref.Nr 00880 Name of the 3D FIBER laser tube cutting machine Manufacturer Bystronic TTM Model TTM FL170 Year of construction April2018 Laser Lessons 22630 h Options: System for 3D cutting 8500mm Pipe Payload - Rear Pipe single loader from the front 8500mm Condition Good condition Specifications: Smallest pipe length in automatic feeding 3100mm Largest pipe length in loading 8500mm Max. pipe weight 25kg/m Cross-sections Round, square, rectangular, oval, etc Dimensions round cross-section (min./max) 12mm 168mm Dimension square cross-section (min./max) 15x15mm 120x120mm Rectangular cross-section (min/max) All rectangles that fit into a circle of 168mm Travel distances laser cutting head Y = 375 mm Z = 390mm Max. linear speed of the mandrels 130m/min Speed of axis of the cutting head Y = 100 m /min Z = 100 m/min Rotary movement of the Mandrels M ...

SPECIFICATIONS: Number of filter bags: 150 - Ø mm 123 04 Ker crushing plates Height mm: 3000 Fan Power Hp: 30 Star valve Ø mm 320 Tank with 15 solenoid valves Triboelectric probe Spark detection system Output screw conveyor Switch box with inverter Complete with ladders, fencing and piping

Bread roll system Kövy KA 2 4- deer hourly output 4800 pcs. for 60x40 and 60x80 cm tilting planks Baker's condition ready for action

Process chiller / chiller air-cooled, Type: Phoenix PNG2 4302 HEX MTA S.p.A. The Phönix PNG2 4302 HEX are compact chilled water chillers that are suitable for outdoor installation. - Shell-and-tube evaporators, - Electronic Explosion Valves - Shut-off valves for compressors, - System with compressors and hydraulic soundproofing panels - Ambient temperature down to -20 °C - Storage tank and double P2 pump - Metal mesh protective filter for condenser coils (factory-installed) Cooling capacity (kW): 491 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 84 Available delivery pressure bar: 1.8 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R513A, GWP 631, safety classification A1. Refrigeration Circuits (Quantity): 2 Compressors (quantity): 2 Power levels (%): 12.5 to 100 infinitely variable Electrical data: V ...

I sell the complete window construction profiling line: 1 pcs. 5-spindle four-side planer with saw Weinig Unimat 23EL - without grinding machines HESS - other replacement machine by appointment 2 tap cutting and slotting system Weinig Unitec 10. 2 pcs. profile automatic converter center Weinig Univar 10. - Set of complete Weinig automation feeders and foerderer. - without a central computer - must be added and programmed. Year of construction 1997. Milling heads OERTLI. Available the same. Immediately dismantled with original pallets. Price together only 48,000 euros. Condition very good !

This Collin inspection system has been in the machine storage at Plastima Used Machinery since 2021. The machine is from 2007 and has a normal number of working hours for its age. – Brand : Collin Pilot & Lab Solutions – Fashion model : Coficos AIS – Construction year : 2007 – Working hours : NB

A compact extraction system for light applications of the Laser marking, coding and engraving. AD-Access combines cost-effective operating costs with performance, which is adapted to smaller laser applications. A three-stage Filter status display and three-stage filtering are standard Included: DeepPleat prefilter, HEPA range and chemical range. AD Access is an ideal solution for beginners to secure Working conditions for the operator and product quality Maintain.

MTA Spotcooler SC7.3 Manufacturer: THERMOBILE INDUSTRIES BV Type: Coolmobile 25 (industrial version) Mobile spot cooler Coolmobile 25 for selective cooling of e.g. material, cooling tunnels, room areas and heat sources. The Spotcooler is mobile via wheels and can be easily driven to the place to be cooled. The control panel has an adjustment range of +1°C to +31°C and can be switched on and off automatically via a timer. The device can be used anywhere via a Schuko plug (230V / 50Hz). Cold air can be distributed via three flexible hose nozzles. Warm air can be discharged via a flange and warm air hose (both not included). Specifications: Cooling capacity / kw 7.32 (25,000 Btu) Air flow m/h 10.5 - 8.5 Power connection / V / Hz 230 / 50 Starting current / A 57 Operating current / A 13 Power consumption / Kw 2.6 Air filter aluminum and carbon Max. static pressure / mm 3 ...

BOFA's Advantage 350 suction and filter system effectively removes potential harmful vapours and particulate matter produced during the laser marking process arise. By maintaining a dust-free operating range, the System to protect valuable devices, a labeling of continuously higher To achieve quality, reduce scrap rates and reduce pollutants. The low-noise and compact Advantage 350 system is ideal for use light laser marking applications in schools, among others, Sign workshops and small industry.

Special machine / testing machine / 2-axis handling system Testing machine from the field of fuel cells / plastic films, built in 2004. In the past, the handling device was used for the electrical testing of fuel cell membranes using a pneumatic press. This press is no longer available, so the machine can no longer be used for this purpose. The handling device is very well suited as a base carrier for new applications in testing technology. Special-purpose machine manufacturers can use the handling system as a cost-effective base carrier for setting up an automatic testing system and thus secure cost advantages over the competition. Thanks to the on-site retrofitting with a high-quality camera, the handling system can assess the test specimens and sort them into different quality levels with the different suction plates. Thus, with this handling device and a camera sy ...

Extraction AD-Oracle from Bofa - new : with start/stop via external 24V optional: in stainless steel, , hose set, VOC, filter change signal - the compact device offers many areas of application - the filters used are characterized by a long service life - the two filter cassettes separate dust, fine dusts and gases - the air flow is 380 m³/h - the dimensions are 980 mm x 430 mm x 430 mm (HxWxD) Typical applications : Marking laser Engraving laser Cutting lasers Welding laser Soldering and welding smoke

Dissolution Tester for testing the release of active ingredients from drugs. Incl. UV/VIS Spectrometer PerkinElmer.

Pilz safety system PNO m0p 773110, stocked goods, no functional test, manufacturer number: 773110. EAN number: 4046548013153

HausER composite system with 4 compressors Bitzer, 3 pcs. 6J-22.2Y and 1 pcs. 4G-20.2Y with control box, all wired The composite system can be used for plus as well as for minus.

Process chiller / chiller air-cooled, Type: Aries TECH AST2 115 U MTA S.p.A. The Aries TECH AST2 115 HE are compact chillers suitable for outdoor installation (from -20°C to +48°C) with shell and tube evaporator, four scroll compressors, compressor shut-off valves, crank pan heater, phase monitoring, P3 double pump, tank 598 litres, electric antifreeze heater, condenser filter and control and control cabinet. Cooling capacity (kW): 315 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 53.8 Available. Pump pressure (bar): 2.99 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 4 Power levels (%): 0-25-50-75-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 158 Max. Current (A): 262 Starting Current Circuit (A): 507 P ...

I sell the scM Multiflex window angle system. Milling heads VIVALDI EU68mm. Incision + cone spindle right / cone side. 2 pcs. profile milling spindle + glass list cutting saw left / roll forming side Available the same.

Bitzer double composite system with 7 compressors. 4 of them are 6H-25.2Y and 3 of them are 4G-20.2Y

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 031 P5-NF MTA S.p.A. TAEevo Tech 031 P5-NF are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 115 ltr., built-in P5 high-pressure pump, open expansion tank 14 liters and evaporator as NON FERROUS version. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 8.98 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 1.5 Available pump pressure (bar) 5 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 6.6 Max. Current (A) 12 Starting Current Circuit (A) 47 Protection class: IP54 Dimensions: Length (mm) 1315, Width (mm) 660, Height (mm) 1373, Weight (kg) 331 Co ...

Multi-storey shelving system As good as new 4 staircases Year of construction 2016 Modular and compatible Combination of shelving system and steel construction Efficient and economical use of space on 2 floors 2-storey construction More ergonomic usability during order picking Benefit from all the advantages of the SCHULTE plug-in system when multiplying your storage space, such as the compatibility of the 25 mm grid perforation and the variety of accessories. The coordination between the perforation of the MULTIplus T-profiles in a 25 mm increment and the edge height of 25 mm of the shelves enables optimal adaptation to the goods to be stored. Manufacturer: Schulte Lagertechnik Shelving system: Plug-in system Shelf type: 2-storey shelving system Number of stage levels: 1 Floor space: 13.18 m x 16.7 m Square meters: per floor 220.11 m² Height 1 floor: 218 ...

Double composite system BITZER for plus and minus, consists of 5 compressors. Negative composite consists of 2 pcs. compressor 4DC-5.2Y-40S Plusverbund consists of 3 pcs. compressor 4GE-20Y-40P Including switch box

Bitzer CO2 composite system type TPS4-2FHC-3K with 4 compressors type 2FHC-3K for TK

TEKO composite system with 4 PCS FRASCOLD compressor type Z30.126. With control box

TEKO composite system with 4 pcs. FRASCOLD compressor type S20.56Y With control box

Composite system with 2 PCS. DORIN compressor, 1pcs. Type H850CC and 1pcs. Type H1002CC, 38.26 m³

SAA 2001 Aspirator Suction nozzle on the device 125mm Suction nozzle on the distributor 100mm Height 2000mm Weight 47kg Motor 1.5kw 230V 50Hz Nominal volume flow 2553 m³/h G&STÜ-5922201

Process chiller / chiller air-cooled, Type: TAEevo Tech 201P3-20 MTA S.p.A. TAEevo Tech 201 P3-20 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 350 ltr. and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 44.2 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 7.53 Available pump pressure (bar) 2.67 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 23.69 Max. current (A) 39.83 Starting Current Circuit (A) 134.4 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 998 Connection Rp 2" Serial No.: 2200412190 Year of construction 20 ...

Guntner condensator 150kW GVHX080,1B/2x1-MD.E 1200Eur Guntner condensator 264kW GVHX080,1B/2x2-MD.E 1400Eur Guntner condensator 289kW GVHX080,1B/2x2-ND.E 1500Eur Guntner condensator 32kW GVHX 050.1A/1-ND.E - 400Eur Guntner condensator 17kW GVM 040.1B/2-NW.E - 180Eur 2sht Guntner condensator 20kW GVM 040.1C/2-NW.E - 200Eur 3sht Guntner condensator 50kW GVH065.1A/2-X.E- 600Eur 1sht KUBA CA.06-1x2F OHNE VENT.E. 35kW - 700Eur LUVE SHVN 48/8 45kW - 400Eur LUVE SHVN 57/0 55kW - 500Eur LUVE SHVN 157 H/V 155kW - 1800Eur DT15K R404a VERY GOOD CONDITION!