automatic storage system used for sale

New Victron Energy 3-Phase Storage System – 3× 4K5 MultiPlus-II with 30 kWh LFP Battery Offered is an installed and programmed professional 3-phase energy storage system from Victron Energy, consisting of 3× 4K5 MultiPlus-II inverter/chargers in combination with a 30 kWh lithium iron phosphate (LFP) battery. This system is ideal for homes and businesses with a 3-phase connection, and for applications such as solar energy storage, peak load, emergency power supply and hybrid or off-grid installations. The large battery capacity ensures long autonomy and high operational reliability. ✅ Benefits • Full-fledged 3-phase Victron system (3× 4K5) • 30 kWh LFP battery: safe, low-maintenance and long service life • Ideal for higher power and continuous operation • Suitable for on-grid, hybrid and off-grid applications • Smart energy management and monitoring possible via Victron ...

Technical Specifications & Performance Data The Automatic Shrink Wrapper with overlapping film is a fully automatic bundling solution engineered for high-quality industrial packaging in beverage production and other fast-moving consumer goods. Designed for straight-through or 90° infeed layouts and equipped with a welding bar system, it forms tight, stable bundles using shrink film, with the flexibility to run film-only multipacks or film plus flat carton/tray configurations depending on setup. Category: Shrink Wrapper (automatic overlapping film, welding bar) Condition: New Production speed: up to 30 bundles/min (format- and product-dependent) Infeed: Multi-lane conveyor design for stable product grouping Bundle options: Film-only and film with flat carton/tray (configurable) Film handling: Overlapping shrink film with adjustable welding bar widths (on request) Container types: PET,  ...

Semi-Automatic or Automatic Shrink Wrapper with welding bar to 22 P/M – New Automatic shrink wrapper with product feed conveyor in line set up for manual loading of the product on the belt or inserted in completely automatic lines. Suitable for packaging individual or already packaged products such as boxes, trays, hanks of cable, parquettes, or light to very light products with a minimum height of 3 mm such as boxes, linen, reams of paper, magazines, leaflets. Possibility of total closing of the bundles by means of superimposition and lateral auto-gluing. The single-block systems with welding unit and tunnel in a single robust structure were designed to have reduced external dimensions making them compact and reliable, suitable for packaging products with heat shrinkable “flat leaf” polythene film, individual or grouped products with just film, or film plus cardboard di ...

Semi-Automatic or Automatic Shrink Wrapper with welding bar – New The automatic machine, is very fast format changes, 90° product feeding belt, possibility of introducing product up to three rows with eccentric system, the pusher works without air and has a motor controlled by inverter and encoder, perfect to be inserted in automatic lines. Production can vary according to the number of rows required. Suitable for packaging individual or groups products in multiple lines in the desired format, such as boxes, packets of coffee, trays etc. Automatic and semiautomatic machines with welding bar, with product feed conveyer in line, set up for manual loading of the product on the belt or inserted in completely automatic lines . Represent maximum simplification in bundling machine. Created with a single supporting structure. Suitable for packaging individual or already assembled product ...

M. No.: 20051619 Basic Functions: Slit, Cross cut, Crease In-feed paper size: 210(W)x210(L) to 370(W)x520(L)mm Minimum finished size: 55(W)x45(L)mm Paper weight: 120 to 400gsm Depending on paper quality Operation: 4" Touch Screen Job memories: 263 preset jobs & 150 customized job memories. (100 MANU SET + 50 FLEX MODE) Feeding mechanism Upper belt tri-suction suction feed (Patented) Side blower Skew adjustment Side aligner Double feed detection Cut mark registration Feed tray stacking capacity: 100mm Speed 8.8 sheets / min. : SRA3 21up business card 11 sheets / min. : SRA3 8up post card 12.2 sheets / min. : SRA3 4up greeting card 15.4 sheets / min. : A4 2 cuts & 1 crease

Semi-automatic flocking system The system is used for coating and with different materials. It is also conceivable to use it as a painting system. In this particular case, the inner parts were coated by handheld compartments for the automotive industry. The handheld boxes hung on a chain conveyor belt and were first sprayed with glue by hand. Afterwards, the boxes were sprayed with the flocking material in the individual flock cabins. The spraying direction changes from station to station.

Semi-automatic flocking system Flockkabine MAAG flocking technology The system is used for coating and with different materials. It is also conceivable to use it as a painting system. In this particular case, the parts were coated for the automotive industry.

Workpieces are fed in bulk, checked, bad parts are sorted out and good parts are placed in containers as bulk goods. Workpiece: Bolt, Ø 6 - 12 mm Workpiece length: 33 - 56 mm Cycle time: 1.8 s Camera inspection (dimensions and surface defects) - high-resolution matrix camera (21 Mp), dimensions - Line scan camera (4K), surface inspection Parts bunker SKAKO, 71 l volume HSMA07903 up to 125 kg in stock Original price: € 230.000,-

Optimize your production with our automatic material feeding system for 10 machines! Components: Stainless Steel Silos: Quantity: 4 Capacity: 70 m³ each Year: 2000 Side Channel Turbine: Power: 7.5 hp (5.5 KW) Electrical panel: Additional equipment: With PLC and display Pipeline & Receivers: For all 10 machines Ready to get started? Contact us directly! Send us a message by WhatsApp to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Vollautomatische Hochleisungsstanze - Fully Automatic Punching System Kugler 340-2R Baujahr / Year 1998 - Serial-No. 1941-340-2R Arbeitsbreite / Working width max. 340mm Format / Sizes min. 120 x 105mm Format / Sizes max. 340 x 340mm Stanzstärke / Punching thickness max. 3mm Mechanische Taktleistung pro Minute / Mechanical cycles per minute 80-100 Cycles Anlegesystem für kontinuierliches Arbeiten / Paper feeding for continuous running Kastenauslage mit Rüttler / Paper output with Jogger Inkl. Handbücher / Incl. Manuals Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Vollautomatische Hochleisungsstanze - Fully Automatic Punching System KUGLER-WOMAKO ProPunch 50-110 (R) Baujahr / Year 2009 - Serial-No. MK00579 Arbeitsbreite / Working width max. 500mm Format / Sizes min. 120 x 105mm Format / Sizes max. 500 x 500mm Stanzstärke / Punching thickness max. 3mm Mechanische Taktleistung per Minute / Mechanical cycles per minute 110 Cycles/min. Anlegesystem für kontinuierliches Arbeiten / Paper feeding for continuous running Kastenauslage mit Rüttler / Paper output with Jogger Inkl. Handbücher / Incl. Manuals Leistungsaufnahme / Power requirement 4kVA / 3kW Nennstrom / Power 10 A 2 Werkzeuge / 2 tools 3:1 - 550 mm lang Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

2 independently working cutting bridges 2 working zones (1750x1000mm each) High-performance vacuum turbine X servo drive; Y and Z axes 2 high-luminosity projectors Windows 7 operating system Calculator with CNC interface, modem and Ethernet card

Three identical Ishida packing robots are available, suitable for ready meals, meat, poultry, fish and seafood, fresh fruit and vegetables, salads, dairy products, fruit and confectionery. Max. throughput capacity: 80 products/min, max. speed infeed belt: 0.6m/s, max. speed crate conveyor: 0.6m/s, frame dimensions: 2000x1600x2600mm, weight: 1.2t. With documentation, an on-site inspection is possible.

Fully automatic and efficient packaging process realizable by AMTEC?s speed shrink Complete System 35L. That system includes: Shrink Wrapper speed shrink 35L (vertical), SHRINKtunnel-POF-L (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: L-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute | packing sizes: (L + H) max. 600mm provided that H < 180mm and (W + H) max. 500mm provided that H < 180mm | length of sealing blades: horizontal = 703mm,  ...

Fully automatic and efficient packaging process realizable by AMTEC?s speed shrink Complete System 35XL. That system includes: Shrink Wrapper speed shrink 35XL (vertical), SHRINKtunnel-POF-XL (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: XL-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute | packing sizes: (L + H) max. 800mm provided that H < 180mm and (W + H) max. 650mm provided that H < 180mm | max. length of sealing blades: horizontal  ...

Fully automatic and efficient packaging process realizable by AMTEC?s speed shrink Complete System 35M. That system includes: Shrink Wrapper speed shrink 35M (vertical), SHRINKtunnel-POF-M (high speed ), infeed and outfeed conveyors. Features and specifications of the shrink wrapper: M-version of vertically working L-bar shrink wrapper. The sealing unit uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 35 cycles/minute | packing sizes: (L + H) max. 500mm provided that H < 180mm and (W + H) max. 400mm provided that H < 180mm | length of sealing blades: horizontal = 623mm,  ...

HSG Store Pro Smart automation for modern production Fits 3015 and 4020 available. The HSG STORE Pro is an intelligent and flexible automatic loading and unloading system designed to effectively address common production challenges such as staff shortages, limited space and low machine utilization. With a tower height of only 4.4 meters and up to 10 storage positions, you can use your space up to 70% more efficiently. Synchronized processes minimize waiting time and maximize machine capacity – ideal for higher outputs even in the second or third shift. The STORE Pro supports a variety of sorting strategies and grows modularly with your production needs. Affordable, secure and easy to use – the perfect automation solution for every step of your process. Automation reduces waiting times because logistics employees have less manual material. At the same time, our system ensu ...

TH7 laser head, T-Speed 60 plates/hour, max. plate format 950 x 1163 mm, including automatic pallet loader APL, inline punch, maintained by Kodak Germany, Immediately available, conditions and price on request

up to maximum panel format 1397 x 1778 mm, with automatic pallet loader Immediately available, price on request

incl. inline punch, automatic pallet loader with 2 segments, under full maintenance contract Coming soon, price on request

Fully automatic machine with automatic plate feeder consisting of 5 cassettes, identical to AGFA Avalon N8-60 XT, available at short notice, price on request

Positioning resolution: 1µm, max. placement rate: 6000cp/h, max. feeder capacity: 310, min. PCB dimensions X/Y: 50mm/50mm, max. PCB dimensions X/Y: 780mm/600mm, PCB thickness range: 0.5mm-3.5mm. Documentation available. An on-site inspection is possible.

Semi-automatic strapping machine PRO-System Packaging Technology TP-501, year of construction 2014

Semi-automatic strapping machine PRO-System Packaging Technology TP-501, year of construction 2014

BasysPrint 867 1500DPI Fully Automatic with 4 Cassettes and Bacher Punch One laser module with 2560 hours, optionally a second module can be offered. Operating counter plates: 404960 pieces Machine was discontinued due to plate conversion to thermal Dismantled by BasysPrint technicians and secured for transport. If you are interested, videos of the functionality can be sent via WhatsApp BasysPrint 867 1500DPI fully automatic printer with 4 cassettes and Bacher die-cutting unit One laser module with 2560 hours of operation; a second module is available as an option. Plate counter: 404,960 The machine was sold due to a plate conversion to thermal printing. Dismantled and secured for transport by BasysPrint technicians. If interested, videos of the functionality can be sent via WhatsApp.

Used Diversey automatic CIP systemTechnical Specifications & Performance DataThis Clean-In-Place (CIP) system is designed to deliver reliable, repeatable sanitation for beverage production and industrial packaging processes. With three dedicated tanks and fully automatic operation, it streamlines cleaning cycles across process circuits, fillers, pasteurizers, and associated pipelines. The system’s electric heating ensures precise temperature control for effective caustic and rinse phases, supporting consistent hygiene standards on second hand and used bottling line installations.System type: Clean-In-Place (CIP)Year of manufacture: 2012Automation level: Fully automaticHeating method: Electrically heatedPower rating: 15 kWElectrical requirements: 380V / 50 HzNo. of tanks: 3Tank volumes: 2 x 1.0 m³ and 1 x 0.5 m³Total tank capacity: 2.5 m³Application: Beverage production and indust ...

Cat No. 12-2800(132) New made of V2A - KUBISCH - pressureless Standard equipment with: • External dimensions: 1000 x 1000 mm • Height tank body: approx.1000 mm • Height tank with feet: approx.1480 mm • Material V2A AISI 304 - Material thickness: tank 1.5 mm / feet 2.5 mm / transport eyelets 2.5 mm • Weight: 130 kg • Capacity: 1000 litres • Top manhole 400 mm - lid with 4 screws and clamping bracket with screw and fermentation spandy NW 50 • Underbody deep drawn • with residual outlet DN 65 • Corner reinforcement 150 mm/150 mm from bottom to top tank • Surface: marbled outside - inside 3D • stackable - transportable with hand-held trucks • In the filled state of: 1 + 1 • In the empty state of: 1 + 3 Supplement/piece (prices on request): Disc valve DN 65 Disc valve DN 50 Blind cap Reduction piece NW 65/40 or 65/ ...

Kat-No 10-1750 in very good condition With connection socket at the top With manhole lid front 400x300 mm With tasting tap connection With 2 x threaded connection connector at the front With conical floor with residual outlet DN 65 With 3 transport eyelets With bracket for riser pipe Height-adjustable on 4 calotte feet Dimensions: Total height: 4300 mm Body height: 3160 mm Diameter: 1800 mm For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 We also have other items (new or used), tanks, pumps, filters, beverage and food technology, brewery, distillery and much more - Please request our complete catalogue! All prices are ex works plus law VAT. Intermediate sale reserved! Freight cost share: by scope of delivery Visit also in the evening or on weekends by appointment.

Cat. No. 10-1765 in very good condition With manhole round top 400 mm With vent dome DN 300 With CIP cleaning With filling nozzle DN 50 With threaded connection connector DN 50 With level indicator with bar and scale With agitator on the side With conical bottom m.Remaining outlet DN 50 Height-adjustable on 4 calotte feet Dimensions: Total height: 4000 mm Body height: 2450 mm Diameter: 2400 mm with agitator: 2800 mm The price is for a tank. For back-up questions: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 All prices are ex works plus law. Vat Freight cost share: by scope of delivery Delivery: from 97753 Karlstadt-Karlburg Intermediate sale reserved Sightseeing is also possible in the evening or on weekends by appointment.

Cat.-Nr. 11-2625 new Cat.-Nr. 11-2625 Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Tested up to 3,4 bar – working pressure + 2,0/- ,015 bar Upper Bottom: with strong stackable crown with manhole lid DN 400 with 6 x Screws with 1 x overpressure valve with 1 x CO² venting valve Cylindrical Body: with 4 x reinforcing rings for better pressure resistance Lower Bottom: with outlet DN 50 with conical bottom with 4 strong feet can be moved from all sides with forklift / truck pallet Measurements and Weight: Total Height: 1520 mm Diameter: 800 mm Weight: 92 kg Surcharges / each: Fermentation Lock DN 50 Sample Valve Blind Cap DN 50 Fermentation Fittings CIP Cleaning System The price is for one tank. The tank is also available in 300 litres. The price is 1535€ for one  ...

Cat. No. 09-1590-1 New Standard: - with residual outlet with inclined seat disc valve DN 50 - with cylindrical conical bottom at the bottom and top - Test pressure: 1.5 bar - permissible operating pressure: 0.49 bar - Material V2A AISI 304 - Surface inside and outside IIIC - With mannhole DN 400 with 6 screws, overpressure valve - Threaded connection connector DN 25 and with inclined disc valve DN 25 Cat. No. Content: Diameter: Ges.Height: Weight: 09-1590-1 600 litres 1000 mm 1310 mm 79 kg On request with (please ask prices): Fermentation spandconnection DN 50 CIP Cleaning Fermented spundar fitting Trial tap For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law VAT Intermediate sale reserved! Freight c ...

Cat. No. 11-2515 in very good condition! Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: with 1 x welded nozzle centrally in the upper floor through: 50 mm with filling nozzle at the top: 90 mm still facing the front with 2 x transport eyelets with 1 x ladder hook with 1 x holder grif with lace bottom on top Body: with manhole 420 x 320 mm with clear drain DN 50 with tasting valve connection Underbody: with forward pulled outlet pipe DN 50 with lace bottom at the bottom adjustable with 4 calotte feet with base plate Dimensions and weight: Total height: 4500 mm Diameter: 2800 mm Weight: 1500 kg The price is for a tank. For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. All prices are ex works plus law ...

Cat.-Nr. 09-1590-1 new Standard Features: - with outlet with inclined seat valve DN 50 - cylindrical conical head top and bottom - test pressure: 1,5 bar - max. allowable operating pressure: 0,49 bar - material AISI 304 - surface inside and outside IIIC - with manhole DN 400 with 6 srews, over pressure relief valve, thread connection DN 25, with inclinded seat valve DN Cat.-Nr. Capacity: Diameter: Total Height: Weight: 09-1590-1 600 litres 1000 mm 1310 mm 79 kg Surcharges/Unit: Fermentation Lock DN 50 CIP Cleaning System Fermentation Valve Sample Valve For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat.-Nr. 09-1020 in a very good condition Standard Features: • with Manhole DN 400 x 300 mm • with Outlet Discharge DN 50 mm (DIN 11851) • with 2 x Connections on Manhole DN 50 mm (DIN 11851) • with Level Indicator DN 10 with Valve • with Connecting Flange for Mixer • with Filling Tube DN 30 mm • with 2 x Transport Hooks • with Connection Thread Measurements and Weight: Diameter: 2800 mm Diameter Cyl. incl.Filling Tube: 3000 mm Total Height: 6700 mm Weight approx: 3 ton For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 11-3231 (tank No. 402) in a very good condition description: outside: marbled – inside: 2B with Gaerspundanschluss with manhole in front 430 x 330 mms with probeer cock with clear expiry DN 65 with rest expiry with Einschweissflansch DN 65 with level indicator with strip and scale with leading holder with level ground with forwards pulled rest outlet Measurements: width: 2,550 mm depth: 5,000 mm height: 4,000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 11-3234 in very good condition Description: outside: marbled – inside: 2B with fermentation lock with manhole in front 430 x 330 mms with Sample Valve with clear expiry DN 65 with rest expiry with welding flange DN 65 with level indicator with strip and scale with leading holder with flat bottom with forwards pulled rest outlet Measurements: width: 2,550 mm depth: 5,000 mm height: 4,000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 11-3236 in very good condition cubically, very stable execution Description: outside: marbled – inside: 2B with fermenatation lock with manhole lid in front 430 x 330 mms with sample valve with clear discharge DN 65 with outlet discharge with welding flange DN 65 with level indicator with ladder rack with flat bottom with forwards pulled rest outlet Measurements: Width: 2,550 mm Depth: 5,000 mm Height: 4,000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 09-1590-2 new standard equipment: With rest outlet with sloping seat discs valve DN 50 With cylindrical conical ground below and on top Test pressure: 1.5 cash – admitted working pressure: 0.49 bar Material V2A AISI 304 - surface inside and outside IIIC With manhole DN 400 m. 6 screws, Ueberdruckventil thread connection carbines DN 25 and with sloping seat discs valve DN 25 Kat. No. contents: Diameter: G flat height: Weight: 09-1590-2 800 litres 1,000 mms 1,550 mms 89 kg upon request: CIP Cleaning Connector fermentation fittings Fermentation lock DN 50 Sample Valve For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 09-1590-3 new standard equipment: With rest outlet with sloping seat discs valve DN 50 With cylindrical conical ground below and on top Test pressure: 1.5 cash – admitted working pressure: 0.49 bar Material V2A AISI 304 - surface inside and outside IIIC With manhole DN 400 m. 6 screws thread connection carbines DN 25 and with sloping seat discs valve DN 25 diameter: 1,000 mm contents: 1,000 mm height: 1,720 mm weight: 102 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Kat. No. 09-1590-4 new standard equipment: With rest outlet with sloping seat discs valve DN 50 With cylindrical conical ground below and on top Test pressure: 1.5 cash – admitted working pressure: 0.49 bar Material V2A AISI 304 - surface inside and outside IIIC With manhole DN 400 m. 6 screws thread connection carbines DN 25 and with sloping seat discs valve DN 25 contents: 1,200 litres diameter: 1,000 mm total height: 1,980 mm weight: 115 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 11-4105 in very good condition Material: V2A - AISI 304, 1.4301- Surface: inside and outside 2B=IIIC Topsoil: with manhole pressure cap 1.5 bar test pressure DN 400 with 6 star head screws, with handle bracket, Threaded welding nozzle DN 50 Tank body: manhole 430x300 mm Underbody: Konusboden 45 with forward-drawn outlet pipe with disc valve DN 65, with forklift shoes, with stable frame, with pallet lift truck all sides underpassable. Test pressure: 1.5 bar Working pressure: 0.99 bar DxH: 1100 x 2200 mm - Weight: 230 kg Supplements/pieces (on request): Fermentation spandconnection DN 50 Euro Trial tap Blind cap DN 50 Fermented spundar fitting CIP Cleaning The price is for a tank. For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our c ...

Cat-Nr. 09-2090 new cubic Standard Features: • Outer Dimensions: 1050 x 1050 mm • Height Body Tank: approx. 1550 mm • Height Tank incl. Feet: 2000 mm • Material AISI 304 – Material Thickness: Tank 1,5 mm / Feet 2,5 mm / Hooks for Transport 2,5 mm • Weight: 154 kg • Volume: 1500 Liter • Manhole on the Top 400 mm - Lid with 4 Screws and Clamps with Bunging NW 50 (as per Photo below) • Bottom in Symmetrical Shape • Outlet Discharge DN 65 • Reinforcement 150 mm in each Corner of the Tank • Surface: outside marbled – inside IIID • stackable – 3 in empty, 2 in full • transport possible with Hand-Lift or Fork-Lift Surcharges / unit (upon request): Butterfly Valve DN 65 Butterfly Valve DN 50 Closing Cap for Outlet Reducing Unit NW 65/40 or 65/50 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-909052 ...

Cat-Nr. 12-2765 in a very good condition With Cooling Jacket Surface: Outside and Inside: 2B=IIIC Upper Bottom: With Manhole Lid round 400 mm with Clamp With Inlet Connector DN 25 Tank Body: Mit Threaded Connection for Cooling Jacket DN 23 Lower Bottom: With Flat Conical Bottom with Central Outlet With Outlet Discharge DN 65 reduced to DN 50 Butterfly Valve With Threaded Connection with Outlet on Cooling Jacket DN 15 Measurements and Weight: Height x Diameter: 1560 x 1220 mm Height Tank Body: 960 mm Weight: 270 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat.-Nr. 13-0176 in a very good condition material: V2A � AISI 304 (1.4301) � surface: outside and inside 2B=IIIC Manufacturer: com. Binder GmbH Upper bottom: - flat conical lid with with CIP-cleaning and connection DN 65 - manhole oval 435 mm x 310 mm with clamping bracket and screw plug - CIP-connector DN 50 - Ventilation connector 200 mm - 1 flanged connector DN 50 - 2 eye hooks Tank body: - thread connector on the side above DN 50 - thread connector on the side above DN 50, 40 cm depth - with overflow pipe inside DN 100 up to the top of the tank bottom - fill pipe installed inside to tank center DN 100 welded from top to bottom - ladder hook 500 mm Lower bottom: central conical bottom outlet pipe DN 50 on 4 stable trumpet feet with calotte height adjustable DxH: 1.720 x 3.700 mm weight: appr. 800 kg All prices are valid Ex-Works, excl.V ...

2 pieces of loading cells / storage cells 90 sqm3 Smooth wall with 2 funnels Dimensions: 2600 x 5200 x 6706 mm + funnel and substructure Exit slider 250 mm 250 mm Available Mob. +491715213204

Cat. No. 12-2070 in very good condition Material: V2A – AISI 304 (1.4301) – Surface: inside and outside 2B=IIIC Upper Bottom: With ventilation hose DN 350 With weld-on fitting centrally located on upper bottom DN 65 With T-distributor threaded connection, one side DN 25 other side DN 50 With 2 crane lugs Tank Body: With manhole lid 450x350 mm With connection flange DN 300 for agitator on the side With connector for spray ball under the agitator Lower Bottom: With outlet DN 100 centrally located On 5 adjustable feet Measurements and Weight: Length: 5450 mm Tank Body Height: 3900 mm Diameter: 3300 mm Weight: ca.3,5 ton For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on d ...

Cat-Nr. 10-2460 in a very good condition Material: V2A - AISI 304, 1.4301 Surface: inside: IIID, outside marbled Upper Body: with Manhole Lid DN 400 with 4 Screws with Clamp Closure, with Fermentation Lock DN 50, with 4 Eye Hooks Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Height: 1570 mm Outer Dimensions: 800 x 1200 mm Weight: 130 kg The price is for one tank. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.