automatic punching machine used for sale

Bridge punch from Sandt with 30t

Atom cart beam punch with 25t. The machine is fully functional.

Bridge punch of the company Schön, model 64035 / 92 The machine is fully functional.

Sheet format: max. 1060 x 746 mm, min. 400 x 350 mm Equipment: Stripping station, depaneling, centerline, floor storage in depaneling station, Quick-Lock quick-release closing frame, max. machine speed 9,000 sheets/hour, max. die-cutting pressure 260 tons, processable materials: paper min. 70g/m², cardboard / solid board max. 1,000 g/m², corrugated cardboard up to 2 mm. Condition: Not operational Sale exclusively as spare parts donor Missing parts: Pumps, Grippers, Chain, Cube, Various Electrical Components Other: Machine can be visited by arrangement.

Punching machine Pneumatic Presser Serial-No. 17063-

Manufacturer: FINN Model: POWER LP6 Year of Manufacture: 2007 Working hours: 21,500 available : immediately Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: FINN POWER Model: LPe5 Year of Manufacture: 2002 Work area: 2500×1250 mm (+ repositioning) AVAILABLE: immediately Find more here - .ucymachines/ Contact us at - sales@ucymachines

Key data: 75 t, 80 mm, 120 1/min

Pressure 75 t Stroke rate 120-600 / min Sheet width 10-300 mm Table size 1050 x 820 mm Pusher clamping surface 960x820 mm Distance table - UK plunger 380 mm Adjustable stroke - max. 80 mm Feed length 0-150 mm Total power requirement 20 kW Machine weight approx. 13 t Feed unit with max. belt speed 70 m/min Eccentric shaft with 4-fold bearings 2 connecting rods Central lubrication incl. magnetic belt conveyor - in use until 2020 -Operating instructions -Manual - Circuit diagram etc..

A cylinder roll punching machine Adolf Illig is available. Pass-through width: approx. 850mm, pass-through height: approx. 120mm, roll diameter: approx. 190mm, table dimensions X/Y/Z: 2x approx. 1200mm/1200mm, working height: approx. 800mm, machine dimensions X/Y/Z: approx. 2700mm/1350mm/1550mm, weight: approx. 900kg. An on-site inspection is possible.

Amada punching machine EMK 3610NT incl. loading unit MP300 for sale. We would like to hand over the machine complete with tools and Wilson X-Sharp grinding machine.

Inv. Num. : 5955 Type: Trumatic 500 R Producer: Trumpf Created: 2003 Parameters: Control system: TRUMAGRAPH CC 220 S Switch-on hours: 29433 h Compressive force: 22 t Machine height: 2200 mm Machine length: 6900 mm Machine width: 5800 mm Machine weight: 11000 kg 2020: Replacement of hydraulic hoses

pressure: 25 t no. of strokes: 1500 Hub/min sheet width: mm total power requirement: 20 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 25 t no. of strokes: 1500 Hub/min sheet width: mm total power requirement: 20 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

740 x 1,050 mm max. / 330 x 480 min. Size MABEG Scale Layer Flatbed die-cutter Punching force 1.8 MN / approx. 182 t HFS Hot Foil System Feeder stack 115 cm Display stack 85 cm Total meter approx. 12 million

Punching force 45 t. 2 pcs. available from stock (Video under power on request)

Width 34 cm Year of construction 2000 electric punching and binding machine Electric Punching - Manual Tying Split 3:1 Table model Delivery date: short-term Price on request. We supply and install worldwide.

Inv. Num. : 8689 Type: SBL-1050SE Producer: SABRE Created: 1994 Parameters: Maximum format size: 1050 x 750 mm Minimum format size: 400 x 370 mm Maximum workpiece thickness: 0.1-2 mm Impact pressure: 300 t Service ramp dimensions: 3282 x 1740 mm Length: 5573 mm Height: 2025 mm Width: 2111 mm

Make: TRUMPF Type: TRUMATIC 2000R Year of Make: 2001 Working area: 1270 x 1270 mm Punching force: 18 tons Max. sheet thickness: 6.4 mm Max. workpiece weight: 75 kg Max. punching diameter: 76 mm Max. speeds: 90/60/108 m/min Accuracy: +/- 0.1 mm Length: 5100 mm Width: 5800 mm Height: 2070 mm Weight: 9200 kg Accessories: TOPS 2000 CAM software, tool holder, Very good condition, only thin sheets

gebr. CNC punching press Finn-Power, type F6 SV, year 2005 Press force: 300kN Max. workpiece width: 4061mm Max. workpiece length: 1528mm Max. workpiece thickness: 8mm Max. workpiece weight: 200kg Fast feed X/Y: 80m/min/60m/min Tower head seats: 20 Tower head speed: 30rpm Travel speed: 100m/min Oil tank capacity: 330l Max. operating pressure: 300bar Dimensions X/Y/Z: approx. 5900mm, 6300mm, 2500mm Weight: approx. 13500kg Control: Siemens Sinumerik 840D Table of the machine has been extended. (Without machine housing)

pressure: 75 t stroke: 8-80 mm no. of strokes: 80-200 Hub/min ram - range of adjustment: 70 mm table surface area: 900x600 mm ram surface: 900x470 mm hole in the table: 450x180 mm dist. between columns - front to rear: 500x350 mm dist. between pillars (front to rear): 788 mm total power requirement: 10 kW weight of the machine ca.: 10 t dimensions of the machine ca.: BxTxH 1600x1200x2800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reference ID PP-52393 Category Flatbed Die Cutter Manufacturer Heidelberg Model Promatrix 145CSB Year Built 2018 Color- Impression- Working Hours - Speed-- Max. size 1060 x 1450 mm Min. size 450 x 580 mm Condition Good Location Europe Availability December 2025

sheet width: 750 mm plate length: 1250 mm plate thickness: 4 mm table surface area: 1600 x 1050 mm no. of strokes: 180 Hub/min max. punching diameter: 105 mm punching pressure: 25 t total power requirement: 4,0 kW weight of the machine ca.: 1,8 t dimensions: 1,9 x 1,9 x 1,7 m Punching and nibbling machine - Digital readout for X and Y axis - Tool cabinet with tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

video control station The VCPevo / VCP Evolution (often written VCPevolution”) is a fully automatic register punching & bending system for printing plates (offset printing) built by NELA. VCP” stands for: Video‐recognition of register marks (V) + Controlling via CCD image processing (C) + Positioning by stepping motor control (P) — as one brochure puts it. The machine is used in the pre‐press / printing-plate automation sector: it aligns exposed printing plates, punches the register holes, bends the plates (to the correct angle) in one cycle. The VCPevolution line is described as the new generation” of the VCP series, aimed at high precision, high throughput, integration into automation / plate sorting lines. According to NELA’s product page for VCP, the machine is available in different models and can easily be integrated into any automation solution.” nela.de Fin ...

Impressions=0 m, Condition= Very Good , Availability= 2025-11-03, Bed size 105x 147 cm Pneumatic clutch full working condition Video available

Specifications: • 75 x 53 cm 6 mm Accessories: • PC workstation • DZDV PC TOUCHSCREEN PC 32" 9970460-20 incl. console • SLEEKING System HAK 100/Brother hot foil printer/finishing system Year of construction: 2024 Price: We ask for your binding offer Available from: immediately Terms of delivery: ex site – EXW Wiehl Payment Terms: Payment before pickup Accessories without guarantee. The following applies: "Object bought as seen". The prospective buyer must satisfy himself on site of the completeness of the property.

pressure: t plate thickness: 5 mm sheet width: 40 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2005 Amada EM2510NT Excellent condition 45 stations, 4 indexing No loading system A lot of tools and spares Books

IBERICA JRK 105 with Blanking year 2000 A DIE-Cutting press of size 75 x 105 cm (29 517 Hours) Including : Stripping and Blanking Station, NON-Stop Feeder, Control and Pull Lay System, Mini. Paper thickness 90 g/m2, Max. Cardboard thickness 1,5 mm, Max. corrugated 3 mm, Chases and Frames, 300 Tons Cutting Pressure, Speed 8 500 S/Hours. In good Condition, Immediately available

Dimensions (L/W/H): 0x0x0 mm Weight: 35 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 100 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Dimensions (L/W/H): 0x0x0 mm Weight: 35 kg Weight: 35 kg Total power requirement: 0 kw Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: AMADA Model: AC-2510 NT Year of Manufacture: 2008 Technical data: Punching force: 200 kN Punching drive: Servo-electric drive Machine frame: Bridge frame Travel range (X x Y): 2500 x 1270 mm Positioning speed (X-axis): 80 m/min Positioning speed (Y-axis): 90 m/min Axis simular velocity: 100 m/min Control: AMNC-F Find more here - .ucymachines/ Contact us at - sales@ucymachines

Impressions=0 m, Condition= Very Good , Availability= 2025-12-23, Bobst Speria 106 Sheet Counter: 200 million Maximum format: 740 × 1060 mm Minimum format: 350 x 400 mm Maximum Speed: 7700 sheets/hour Pressure: 260 tons Stripping station CUBE control Centreline system for quick job changes Quick lock stripping frame Micrometric adjustment 1mm thin plate system Electronic sheet travel control Double-action stripping OS pull side lay OOS push side lay Make-ready table - stripping Non-stop delivery

Equipment: 1 Carriage Feed Right 1 eccentric press 250 kN 4 normal carriage units 1 narrow carriage unit Working Range: Wire thickness range: up to 6.0 mm Strip width: up to 80 mm Feed length: up to 250 mm Power: 10 - 250 rpm

Equipment: 1 pliers feed right 4 Carriage Units Working Range: Wire thickness range: 0.5 - 2.0 mm Band width: up to 10.0 mm Length of move; up to 100 mm Output: up to 300 rpm

Equipment: 1 piece BIHLER noise protection cabin 1 piece pliers feed right 1 piece eccentric press 70 kN 4 Norma sled units 1 piece narrow sled unit Working Range: Wire thickness range: 0.5 - 3.5 mm Strap width: up to 32 mm Feed length: up to 170 mm Power: up to 250 rpm

Inv. Num. : 8884 Type: OMATIC 130 DTR Producer: OMES Generated: 2000 Parameters: Compressive force: 30 t Maximum length of sheet metal plate: 4000 mm Maximum blade width: 1500 mm Machine weight: 8700 kg Equipment: Accessories

max. sheet format 1040 x 740 mm, min. 400 x 350 mm, stripping station, centerline, non-stop feeder, non-stop deposit, drawing mark left, sliding mark right, gripper edge separation, raised 41cm, production hours: 25,000, Bobst-Cube control, micrometer adjustment, electric double sheet control, 1 upper die-cutting frame with quick-release fastener, 1 die-cutting plate 4mm, 1 upper stripping frame, 1 lower stripping frame, max. machine speed 7000 sheets/hour, max. punching force 250 tons, Processable materials: paper min. 80g/m², cardboard up to max. 2000g/m², corrugated cardboard up to 4mm. Overhauled, repainted

Mubea Hole Punch Model KL 750 Optima Year of manufacture 1990 fully functional Hebqowr Dk Rjxim Iqsfb Max. punching force 750 kn Triggering stroke via foot switch With very extensive tools, see photos

This AMADA Vipros 255 was manufactured in 2001. It is a used punching and bending machine, ideal for those looking to enhance their metal fabrication capabilities. Contact us for more information about this machine.

This TECHNOLOGY Tecnotransfer 1500x3000 was manufactured in 2007. A robust CNC punching machine, it offers precision and efficiency for your metalworking needs. If you are looking to get high-quality punching capabilities, consider the TECHNOLOGY Tecnotransfer 1500x3000 machine we have for sale. Contact us for more information.

This TRUMPF TRUPUNCH 3000 (S11) was manufactured in 2012. It features a Bosch Rexroth MTX CMP70 control, a maximum sheet format of 2,500 × 1,250 mm, and can handle sheet thicknesses up to 6.4 mm. The punching force reaches 180 kN, with a maximum workpiece weight of 160 kg. It includes a linear magazine with 20 stations and supports various roller tools. Consider the opportunity to buy this TRUMPF TRUPUNCH 3000 (S11) CNC punching machine. Contact us for more information.

This TRUMPF TRUPUNCH 5000 S10 was manufactured in 2013. It features a Siemens Sinumerik 840D control system, a working area of 3050x1550 mm, and a punching press of 220 kN. Capable of handling sheet weights up to 280 kg and thicknesses up to 8 mm, it includes a Linear ATC for 21 tools and additional options like MULTITOOL and ENGRAVING. Regularly maintained and in good condition. Contact us for more information about this machine.

This Finn-Power TRS 6 SUV was manufactured in 2003. A robust CNC punching and shearing machine, it features a punching force of 300kN and shearing force of 250kN. It includes a turret with 20 tool positions and optional a sheet metal storage capable of handling 40 pallets. Ideal for high-quality punching capabilities. Contact us for more information.

This UZMA MAKINA PDM 30 was manufactured in 2012. It features an electronic PLC with a standalone control system, a maximum tube diameter of 90 mm, and a profile size up to 40 x 80 / 60 x 60 mm. The hydraulic motor power is 4 kW, with a total motor power of 5.5 kW. Consider the opportunity to buy this UZMA MAKINA PDM 30 CNC punching machine. Contact us for more information.

This Finn-Power F6-25 5B was manufactured in 1997. A robust CNC punching machine with a machine weight of 14500 kg and a punching force of 300 kN. It operates at a maximum working pressure of 300 BAR. If you are looking to get high quality punching capabilities consider the Finn-Power F6-25 5B machine we have for sale. Contact us for more information.

This KALTENBACH KPS 506 was manufactured in 2009. Its an automatic punching and shearing system for flat bars and angle profiles, featuring a 6-tool automatic changer with hole diameters ranging from Ø5–40 mm. It supports straight and mitre cutting with a working range of 50 × 5 mm to 500 × 25 mm. Includes NC-controlled automatic feeding and a finished part delivery unit. Contact us for more information about this machine.

This TRUMPF TruPunch 3000 S11 was manufactured in 2012. It features a Bosch MTX CMP70 control system, with X/Y-axis travels of 2500 / 1250 mm, and can handle sheet weights up to 160 kg. The machine includes a linear tool magazine with 18 stations and offers functions like MultiTool, MultiBend, and thread forming. Consider the opportunity to buy this TRUMPF TruPunch 3000 S11 CNC punching machine. Contact us for more information about this machine.

This AMADA EMZ 3610 NT CNC punching machine was manufactured in 2011. It features a Fanuc control system, a punching force of 300kN, and a working area of 2500 x 1525 mm, extendable to 5000 x 1525 mm with repositioning. The machine can handle sheet thicknesses up to 4.5 mm and supports a maximum table load of 160 kg. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information.