automated machine for used for sale

Fully automated page welding machine Manufacturer: Diez Type: DCE 5015 Year of construction: 2018 Operating side: in the running direction left Band-width: approx. 450 mm Clearance height: approx. 150 mm Barrel length: Endless Working height / belt height a-spout: approx. 870 mm + 100 Capacity: up to 30 cycles / min (depending on the package size and feed speed) Supply voltage: 400V AC, 50 Hz, 3 pH + N + PE Power consumption: 2 KW Nominal current: 8 A With cable and 16A CEE plug Compressed air supply: 6 bar External dimensions: Length: 1750 mm Width: 1000 mm Height: 1520 mm Description: This packaging machine automatically packaged products of all kinds in foil. Maximum flexibility through the page welding can endlessly packaging products. This allows the user to also overlong products packaging They are limited only in width and in height. But also very small p ...

Circuit board dimensions: 50-250x50-330mm, circuit board thickness: 0.3-2.5mm, length: 420mm, width: 790mm, height: 565mm, weight: 45kg.

We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error are expressly reserved. Yours sincerely Trade ...

Flaring system for sewage gas combustion - Mint- Manufacturer: Haase Maximum flow rate: 10 m³/h Gas pressure: 15-50 mbar Material: Stainless steel (V4A) Diameter: 150 mm Total height: 4.500 mm Emissions: CO2 and NOx to TA-Luft in the range of 50-100% of the maximum power. Flaring system is unused. Only a test run was conducted so as new and in very good condition! System is still built and can be visited at any time!

Eppendorf epMotion 5075 Automated Pipetting System The Eppendorf epMotion® 5075 automated pipetting system is a high-performance workstation thats capable of handling all pipetting and dispensing tasks in the laboratory. This volumetric dispensing system can be integrated easily in the work environment and provide an economical solution for these time-consuming, delicate jobs, so that personnel can spend more time on other laboratory work. The modular design of the entire epMotion® range also lends itself to a wide variety of options, extending its implementation possibilities enormously.

Tissue-Tek® DRS™ 2000 Sakura Automated Staining Station The Tissue-Tek® DRS™ 2000 Automated Slide Stainer offers multiple staining protocols in a true random access mode. Depending on current workload demands, the system can operate up to 11 sets of 40 slides at a time. The operator chooses from 20 stored methods, presses START and walks away. Its a simple but intelligent tool, for unrivalled productivity - blade after blade, series after series. VERY GOOD CONDITION Purchase date: July 2017 Under annual maintenance contract

Welding edge former, edge former, edge chamfering machine TRUMPF chamfers of steel plates for weld seam preparation type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10mm Bevel angle: 30 Power: 2000 Watt Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30 bevel angles - regrindable butt steel for high tool utilization - several impact steels - Support plates 6, 8, 10, 12, 14, 16, 18, 20, 22 mm for different material thicknesses For bevelling straight and curved edges with at least 40 mm radius. For bevelling edges on flat and curved workpieces as well as tubes with an inner diameter of at least 80 mm. Weight: 14 kg; used

Case erector APE model Form 1200 Year: 1998 Speed: 900 c/h Gluer Mesa Included conveyor

Carton forming machine APE mod. FORM 1200 BB Machine for bag in box Speed: 900 c/h Year: 2001 Hot melt closing box. Safety protections.

Box forming machine APE – FORM 1200 HM Year: 1996 Speed: 900 C/H Gluer NORDSON Safety protections.

Box forming machine APE BAG IN BOX | FORMA BB HM Year: 2012 Speed: 1.000 cartoni/h Machine without gluer Safety protections.

Box forming machine TMG | FORMEC Year: 2002 Speed: 5.000 bph Gluer NORDSON Safety protections

Box forming machine SGE | 2007 Year: 2007 Speed: 8.000 bph Model: Formacartoni Gluer included Safety protections

Forklifts, forks, forks with anti-slip coating Payload: approx. 2.5 ton. Tine length: 1600 mm Tine width: 100 mm Tine thickness: 50 mm (40 mm metal + 10 mm rubber coating coating)Fork carrier height: 405 mm - suitable for tine holder: FEM 2 Form B - Rubber coating as anti-slip coating and for protecting transported goods ? Rocker arm lock Net weight: 145 kg mint condition, unused For a 2.5 ton. Forklift.; used

Slab formwork, wall formwork, wooden beams, props, formwork accessories used immediately operational. We are happy to answer questions phone 06190-93449-0 The material can be visited by appointment, we buy also. Note also our other ads! We can offer you several thousand square metres of used formwork, scaffolding and tools - ask us!

Assortment of different formwork devices and formwork aids â?¢ various formwork accessories: system RASTO, MANTO, RASTER, PERI e.g. anchor nuts, anchor plates, Anchor rods (various lengths) â?¢ Formforce, formwork consoles, Formwork elements, belts, etc. â?¢ Bearings and transport containers, such as Boxes made of steel sheet, lattice boxes â?¢ scaffolding accessories, â?¢ see, among others, a list of materials and photos, manufacturer HÃ?NNEBECK, MÃ?BA, ISCHEBECK, PERI, PASCHAL and others. Pricing: from stock Hattersheim, purchase of partial quantities also possible. everything subject to intermediate sale price on request

Case erector MONDO & SCAGLIONE hot melt mod.378-C Year: 2006 Speed: 6/25 C/MIN Hot melt Gluer System PREO PLC Siemens S7 Safety Protections

Case erector OMA hot melt – mod. AC 1000 HM Year: 2016 Speed: 2.000 cases/hour Machine suitable for american cartons Gluer Nordson Control panel with PLC and touch screen Safety protections CE

Box forming machine MONDO&SCAGLIONE Model: 376/c. Year: 1996. Speed: 23 cycle/minute. Gluer NORDSON. Type of clousre: glue. Manual available. Safety protections.

Box forming machine EUROTEMA - FC-2000HM Year: 1997. Speed: 2.000 cartoni/ora. Model: FC-2000HM. Type of box: American. Closure system hot-melt. Safety protections.

Feed boxes Bortolin Model: Feed boxes Year: 2004 Speed: 15.000 b/h Safety protection

Box forming machine – KETTENER Year: 1997 Speed: 12.000 bph Model: KAF 2000 R Safety protections.

Box forming machine SIAT – 150 C/H Year: 2015 Speed: 10 C/minute Closing box with adhesive taps. Safety protections.

Box forming machine BORTOLIN – FOC 23/30 Year: 2000. Speed: 8.000 bph. Model: FOC 23/30. Gluer NORDSON. Safety protections.

Box forming machine MONDO&SCAGLIONE | 378/C Year: 2005 Speed: 1.500 boxes/h Model: 378/C Formation of the horizontal carton Gluer NORDSON Safety protections

Box forming machine BORTOLIN-KEMO Year: 2006 Speed: 7.000 bph Model: Formatrice cartoni Gluer Safety protections

Box forming machine OMA | 40 HM Year: 2009 Speed: 6.000 bph Gluer Safety protections

LPG forklift, gas forklift STILL type RX 70-16T Series No. 517314G00021 Year of construction 2016 Nominal load capacity 1600 kg Lifting height 4920 mm Fork length 1000 mm Fork carrier width 980 mm Construction height 2160 mm Total width 1100 mm Total length without forks 2200 mm Net weight 3040 kg - Triplex mast with full free stroke 1550 mm - hydraulic side shifter - LPG electric drive - 4-cylinder Volkswagen LPG engine with 30 kW - hydraulic auxiliary steering - front work light- reversing - warning light (blue) - rear hazard warning lights (yellow) - 4-wheel super elastic, solid rubber - front tires 18X7-8 SE / rear 18X7-8 SE - according to operating hours counter 22663 operating hours - New TÜV-UVV test good condition; used

Diesel - Forklift, compact stacker MORA type M80CS Fabr. No. 20087 Year of construction 2006 Nominal load capacity 8 ton. Lifting height 3800 mm Fork length 1800 mm Fork carrier width 1460 mm Construction height 3030 mm Total width 1460 mm Total length without forks 3350 mm Net weight 12740 kg- Duplex mast with 1950 mm Free stroke - 4 cylinders PERKINS diesel engine - completely enclosed cab with heating - electrohydraulic tilting device for the cab - hydraulic auxiliary steering - 2 work lights front, 1 piece work light rear - yellow warning - flashing light on the canopy - solid rubber tires (front 28 x 10 x 22) (rear 250/70 - 16) - 9646 operating hours read - UVV-TÜV approval New good condition rental on request; used

Gebr. Partial formwork, length 8 m Steel formwork, wood planked chamber dimensions: W = 2.80 m, H = 2.00 m

Weld edge former INDUMASCH SIEGEN Type V 12 Masch. No.: 50674 Year of construction 1992 Material thickness max. 40 mm Bevel angle 45 Working speed approx. 3 m/min. Motor power 2 kW Mains connection 400 volts, 50 Hz - Flow / return - Built-in guide roller for bevel angle 45 - Belt guard missing Dimensions L x W x H 650 x 600 x 650 mm Weight 75 kg good condition; used

CFS mobile forming machine, type: VM400HS, machine number: 1447, 380 V, 3 Ph, 50 Hz, 23 A, 7.77 kW, 810 kg, s/s mesh belt, belt width: 400 mm, total dimensions: 2280 mm x 1050 mm x 2180 mm. Technical condition unknown.

MF-25 Corner Forming Machine

all stainless steel belt width 600 mm to form meat balls from 6 to ± 80 gr suitable to put in line with a forming machine (VM 400) adjustable speed mobile dimensions (l x w x h) : ± 1.300 x 700 x 1.500 mm

Pouch Form Fill & Sealingmachine manufacturer: Nagema, Germany Typ: HS1 capacity: max. 50 bags/min, infinitely adjustable closing: sealing dosage: volumetric doser like rice, candies, spicery etc. bag width: 120 mm bag length: from 50 200 mm adjustable dimension: 2,0 x 1,1 x 2,1 m weight: 900 kg Techn. State: used, very good state

Thank you for your interest on our machines, we like this may offer you: Manufacturer: Sandeep Singh Model: KSF 800 marzipan & nougat transformer Year of construction: 1977 Working width: 800 mm Capacity: á 20mm - article 8 g - 180 kg /. Electr. Values: 230/400 V, 50 Hz Details: - with 17 different form rollers (!) -Suitable for large production volumes -Plastic rollers with steel core -Stepless speed control -with prior extruder and feed conveyor -For Marzipan and nougat mass We offer this machine "as available" without any warranty/warranty claims or representations for sale. from stock Hess. Lichtenau; bulk

Many thanks for your interest on our Drop Rollers for hard candy, please find follow our offer: Type : Candy roller/ Drop Roller for Hard Candy, hand driven roller size. : approx 58mm x 177 mm Packing dimensions : approx. 630 x 580 x 450 mm (lxwxh) (wooden box suitable for export) Net Weight : approx. 65 kg. Gross weight : approx. 95 kg. Different: with one set brass drop roll round/egg shape without structure, round 300 other types possible. For every roll you decide for size, or you can give us your own form, Also available machine with working table, electrical engine and gear box. We offer this machine in as-is where it is condition delivery time: According to the arrangement ex warehouse Hess. Lichtenau

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

Formingmachine for meat rolls (frikandellen afkorter) Belt width: 700mm With outfeedbelt

Description Precise forming with quick tool changes. Our axial t form forming machines of type REB are specially suited with forming forces up to 1,300 kN and effortlessly master complex geometries. With up to six forming stages in combination with an intermediate clamping unit, they meet almost all requirements. The operation is simple and intuitive via touch panel. A sequence control makes every single movement of the respective forming stage user-friendly and individually freely programmable. Optionally, we equip our systems with electrical or hydraulic-numerical drives. For very short cycle times, these forming processes can be carried out step by step in transfer plants. The systems enable intuitive flow-based programming. Simultaneous axis movements ensure fast production processes and enable efficient and highly dynamic production. Technical data REB 660 6-60 mm . . .

With cup forming station for 15 cups Cup format: 33 mm x 51 mm, height variable depending on the weight Cutting dimension 41 x 59 mm with pull tab Volumetric dosing unit with 15 measuring points for 10 to 30 grams, weight adjustable. Product hopper approx. 50 litres Performance: max. 30000 cups/h depending on the product consistency is suitable for the filling of honey, butter, jam, etc. With carton packer Hassia. Used, complete overhauled.

With tool for 6 cups. Cup sizes: round 45 mm, height variable depending on weight requirements. Die size: round 53 mm, with pull tab. Dosage: volumetric, 6-cups, 10 to 20 g, weight adjustable. Product hopper approx. 50 litres. Capacity: 9,000 cups per hour depending on the consistency of the product.

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

automatic meat ball and fishball forming machine, beef balls, pork balls, fish balls, squid balls, 400-600kgs hour, 18-35mm diameter, stainless mobile frame, 3Ph

Gabler D600 Thermoformer, age 2000:- Unwind Stand Indramat Servomotor Indexing. Top & Bottom Heaters, total Capacity 73.9 kW Indramat Servomotor Forming Station Forming area: 600 x 320 mm Depth of draw neg./pos.: 40/15 mm Stacking and counting Station Counted/ Stacked Products transferred automatically to Delivery Conveyor Waste Material Winder Main Machine PLC Controller: Siemens SIMATIC S5 P3 3A Heater PLC Controller: Siemens SIMATIC S5 95U Operator Touch Pad Control Panel (OPC) : Siemens SIMATIC OP27 Machine has been refurbished in 2014, New set of Cams added during Refurbishment. Excellent Production Condition

Dough forming machine for small pastries MANOTRAD - manually operated - without electrics - mobile - optional with tin cart

Used ILLIG RDK 54 Thermoforming Line, Age 1995 Unwind Stand Indramat Servomotor Indexing Max. Film width 610 mm max. Thickness range 0.18 to 2.5 mm. Hardened Transport Rails, Double Heating, Heating Load 41.0 kW. Heaters move forwards automatically with pneumatic control Sheet Sag Control Form Area 550 x 400 mm Forming & Punching in Mold with integrated Steel Rule Die. Positive Draw 20 mm, Negative Draw 20 to 40 mm Trimming Force 50kN. Top and Lower Platens Moved by separate Indramat Servomotors Heavy duty Toggles on both upper & Lower Platen Stacking/ Counting Station Waste Material Winder Inline ILLIG RS75b Grinder with Sound Proof Housing & Controls. Suitable for PS, OPS, PP, PE, PVC etc.

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K, age 1989 Thermoformer with auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump. Inline ILLIG UG70b Counter/ Stacker Delivery Conveyor for Counted/ Stacked Cups with Ejector Table