au used for sale

Tool holder, milling holder, milling tool -Number: 5x SK45 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 14 kg

Tool holder, milling holder, milling tool -Number: 3x SK50 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for: tool changer -Sale: only complete -Weight: 10 kg

Tool holder, milling tool holder -Number: 21x SK50 recording -various versions -Drill chucks, surface chucks, reducing sleeves, cutter heads, end mills, spindle tools -Price/Sale: complete -Weight: 82 kg

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Take: SK40 -Drilling tool holder: 10 mm -Number: 1x spindle tools available -Weight: 3 kg

Quick change tool holder, tool holder head, quick change tool holder -Support half-round: 22 mm -Assembly for: Grooving/slot steel -Drawing with the photos -Number: 2x holders available -Price: for both -Weight: 3.3 kg/piece

Tool holder, milling holder, milling tool -Number: 58x SK40 mounts -different designs -partly with pull studs -Spindle tools: different diameters -Sale: only complete -Weight: 108 kg

Tool holder, milling holder, milling tool -Number: 10x SK50 mounts -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 40 kg

Tool holder, milling holder, milling tool -Number: 9x SK50 mounts -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 34 kg

For sale is a bread press with a weight range of 30-100g. Partial and circular moulding agents Electronic control with memory for 10 products Incl. 3 knitting plates

Tool holder, milling holder, milling tool -Number: 3x SK50 holders -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -suitable for tool changers -Sale: only complete -Weight: 10 kg

Used bread press FORTUNA, automatic size 4 -Refurbished- - Fully automatic bread roll press - 30 troughs per plate - Weight range: 40 - 110g - for 3.300g dough total - incl. new stainless steel knives - automatic head - with effective cut-off (only cutting - no rounding) - Condition: very good, ready for immediate use - 6 months warranty - Video on request The machine has been completely overhauled and is in very good condition. A visit is of course possible by arrangement.

Tool holder, milling holder, milling tool -Number: 15x SK50 mount -different designs -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 50 kg

Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool: for holding matrices -Bore diameter: 100 mm -Dimensions: 325/335/H115 mm -Weight: 50 kg

I sell the Flader Orbitalbuerstmaschine. Model Quickwood Fladder System Working width 1060mm. Mechanically adjustable rotazion and feed speed. Cheap for rustic bushes and patina surfaces. Profiles possible. Made in Denmark Hansen - Hundebol AS

Triangular notching tool, notching side knife, die holder, parting tool, punching tool, punch, punching die, punching die -Punching Tool: Angle Notching Tool -Remark: only counter knife, without release unit -Dimensions: 185/172/H95 mm -Weight: 9.3kg

Square notching tool, notching side knife, die holder, cutting tool, punching tool, punch, punching die, punching punch -Punching tool: square notching tool -Punching dimensions: 40 x 79 mm square -Dimensions: 225/145/H95 mm -Weight: 10.6 kg

Tool holder, milling holder, milling tool -Number: 25x SK50 mounts -various: versions -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 100 kg

We sell a used and revised TTW with a deposit of 30-100g.

Milling teeth, milling tooth, wear tooth -Milling teeth: 43 pieces -Hole: Ø 17 mm/Ø 19 mm -various: lengths -Sale/Price: complete -Weight: 11.6 kg

Pneumatic demolition hammer, single-arm hammer, pneumatic hammer, jackhammer, chisel hammer -Number: 3x demolition hammer available -Price: per piece -Dimensions: 360/220/H80 mm -Weight: 6 kg

beading machine, hand beading machine, flanging machine, seam closing machine, manual beading machine -max. sheet capacity: 1.0 mm -Projection: 200 mm -Tool holder: Ø 24 mm -Stop plate: adjustable -Dimensions: 750/700/H1500 mm -Weight: 120 kg

Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -with: LEUCO quick release system -Outer: Ø 192 mm -Height: 55 mm -Number: 4x recordings available -Price: per piece -Weight: 9.4 kg

wire electrode, welding wire, welding wire -Net weight: 9 kg -Number: 1x packages available -Price: per package -Weight complete: 9.5 kg/package

Interface, control card, output card, control unit, edgebander, edgebander -Manufacturer: HOMAG HOMATIC -Type: PC control output card -Number: 2 tax cards available -Price: per piece -Dimensions: 30/195/H265 mm -Weight: 0.29 kg

Interface, control card, output card, control unit, edgebander, edgebander -Manufacturer: HOMAG HOMATIC -Type: PC control output card -Type: -Number: 1x tax card available -Price: per piece -Dimensions: 20/195/H265 mm -Weight: 0.27 kg

Control for cleaning system -Type: Autoclude M1000 -Dimensions: 335/210/H120 mm -Weight: 4 kg

Booster pump, CR8-140 A-F-A-AUUV, 9,5m³/h, 120m, Grundfos, used Top Used Top! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer. The pump is in top condition. Electric motor Function guarantee! For parts from second hand we can not take over conventional guarantee and warranty. But we give you a function guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

Barriers, security fences, fences, machine barriers, railings -Fence elements made of box pipe: 40 x 40 mm -Height of the fence: 1050 mm -Dimensions of the U-fence: 2285 x 580 mm -Dimensions of the L-fence: 1280 x 280 mm -Price: for both fence elements -Transport dimensions: 2300/1100/H580 mm -Weight: 72 kg

It is a used, reconditioned Fortuna bun press semi-automatic size 3 (30 pieces) for sale. The bun press is in top condition, fully functional and runs very quietly. A new knife rack was installed. The engine was re-mounted and a new main switch was installed. The machine was repainted. The weight range of the machine is 32gr. - 70gr. per piece of dough (30 pieces). If dough pieces are only pressed and cut, a higher weight range is possible. Incl. 3 x plates (further plates on request). Price on request.

Tires, tractor tires, soil cultivation, seed drill -Quantity: 3x tires from an Amazone seed drill -Tire size -Hub: Ø 40 mm -Dimensions: Ø 750 -Total price: for 3 tires -Weight: 51 kg/piece

2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns -Mounting: Bolt Ø 40 mm -Die stamp: see photos -Dimensions: 690/290/H290 mm -Weight: 61 kg

Tool holder, tool mount, milling tool -Milling chuck: SK40 chuck, 4 pieces -Type: various designs, see photos -Price/Sale: complete -Overall dimensions: 220/140/H110 mm -Weight: 4.2 kg

Wood band saw, band saw machine, band saw, vertical band saw -Band saw: Vertical band saw -Drive: 5.5 kW -Cutting width: max.780 mm -Cutting height: max.300 mm -Saw band: length 5500 mm -Dimensions: 1800/875/H2440 mm -Weight: 870 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square 95 x 95 mm -Type: Mubea 95 holder Ø 50 mm -Die: Ø 200 mm -Total dimensions: Ø 200 x 122 mm -Weight: 11.6 kg

Fortuna dough dividing and warp knitting machine Type: A4 Roll Press Division of 30 Weight range dough pieces 32-120 grams Dough insert per ratchet 960-3600 grams Year of construction: 2015 electric head including 3 knitting plates The robust design and duration of the oil cracking of the transmission parts ensures a long service life Easy cleaning even of the cutter head 380V / 50Hz Weight of the machine approx. 540 kg Trade-in and delivery on request Option for a complete overhaul of the machine Dimensions:  Height: 150 cm Width: 70 cm Depth: 70 cm

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6.6 kg

Dough dividing machine Fortuna Automat A3-30 - 30 Division - with 3 ratchets - with active circuit switch - electric head - Weight range dough pieces 32-80 grams - Dough insert per ratchet 960-2400 grams - Weight of the machine approx. 540 kg

Die holder, notching tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, punching tool Ø 60 mm -Type: Mubea 60 5-12 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.7 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 70 mm -Type: Mubea 70 5-10 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6.6 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 70 mm -Type: Mubea 70 2 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 5,9 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 52 mm -Type: Mubea 52 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 125 mm -Weight: 6,8 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 55 mm -Type: Mubea 55 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6,7 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 90 mm -Type: Mubea 90 5-8 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 116 mm -Weight: 6.7 kg

Die holder, notching tool, punching tool, punch, punching die, punching punch, -Manufacturer: Mubea, punching tool square Ø 55 mm -Type: Mubea 55 1-4 holder Ø 50 mm -Die: Ø 150 mm -Total dimensions: Ø 150 x 120 mm -Weight: 6,7 kg

Die holder, notching tool, punching tool, punch, punch die, punch stamp, -Manufacturer: Mubea, punching tool Ø 75 mm -Type: Mubea 75 5-9 Mount Ø 50 mm -Matrix: Ø 150 mm -Overall dimensions: Ø 150 x 120 mm -Weight: 6.6 kg

--> with discharge screw; Volume : 110 ltr. Drive : 15 KW Drive screw discharge : 7,5 KW Material : Mild steel Weight: 3000 kg Dimensions : L 2.60 m x W 1.60 m x H 1.80 m.

Die holder, notching tool, punching tool, punch, punch die, punch stamp, punch die -Manufacturer: Mubea, die Ø 90 mm -Type: Mubea 90 Mounting Ø 50 mm -Dimensions: Ø 90 x 115 mm -Weight: 3.4 kg

Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Mill holders: SK50 23 pieces with tool holder and accessories -Type: various designs, see photos -Price/delivery: complete -Total dimensions: 600/600/H770 mm -Weight: 152.5 kg

Punch holder, die holder, notching tool, punching tool, punch, punching die, punching stamp, for eccentric press, hydraulic press -Punching tool: slot 10 x 26 mm -Punching dimensions: see photo with dimensions -Hole: Ø 40 mm -Dimensions: 400/90/H205mm -Weight: 7.5kg

x-travel: 1200 mm y-travel: 600 mm z-travel: 600 mm table-size: 1300 x 600 mm max. workpiece weight: 2000 kg spindle taper ISO: 50 spindle turning speed - stepless: 30 - 3500 U/min feeds -stepless-: 1 - 6000 mm/min rapid traverse: 10 m/min power capacity - milling spindle: 18 kW max. torque on the spindle: 500 Nm distance work spindle /surface of the table: 267 - 867 mm distance table-vertical head: 58 - 658 mm voltage: 380 V / 50 Hz control voltage: 230 V total power requirement: 22 kW weight of the machine ca.: 6,5 t dimensions: 3,6 x 4,2 x 2,3 mm • CNC control DR. HEIDENHAIN TNC 360, • hydr. tool clamping attachment • electr. handwheel, • vertical head manually tiltable, • coolant device, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.