au used for sale

with technical advice, Affordable housing Low-cost housing, cmodul austria low cost housing • Pallet circulation systems for filigree and double wall elements NEW & USED • Machines and systems for prefabricated parts - battery formwork, tilting tables and special moulds • Stationary concrete block paving stone and edge stone installations + shapes as NEW • Mobile concrete stone machines + moulds as NEW • Concrete pipe and shaft ring machines and parts thereof • KS - Lime sandstone works • Dry mortar plants and parts thereof • Brickworks and parts thereof our used lines meets after reinstallation by us the Definition RETROFIT

Precast Modular House Machine, Low Cost Precast Concrete House our used lines meets after reinstallation by us the Definition RETROFIT ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobiltel.: +43-664-3358378 office@machines-plants.at www.machines-plants.at Affordable housing Low-cost housing - Hotels - housing estates - residential developments - residential areas & complexes – single housing – low cost housing Günstige Häuser - Low-Cost-Häuser, - Hotels - Wohnsiedlungen - Entwicklungen v. Wohngebiete und Komplexe - Einzelhäuser - preiswerte Wohnungen Cmodul-3D Austria we can offer NEW also C Module dim. 3000 mm x 6000 mm (c-module)NEW MOULDS Affordable houses - low cost living space Low cost housing I am proud to introduce now our improved system for the construction of affordable houses. S ...

Precast - Wall - Filigree - factory. Good as new circulation system: 60 pallets with 3.5 mx 8 m, 3 x lateral transport of pallets - Facilities, 1 x vibrated concrete station, new control - Beckhoff. Concrete distributor Crane 1.4 m³. Friction wheels. Roller blocks. Planning and installation as required. Formwork on request. Is dependend on the application. For low cost housing, cmodul austria low cost housing Affordable housing Low-cost housing Mixing system 1 m³ at extra charge. Tilting device if needed for concrete slabs vertical-tansport at extra charge. Cran for stock handling at extra charge. Projects for social housing are our daily work. Civil work plans, drawings and calculations, we can create for you. Similarly, profitability calculations.

Type; AUMA 15SN X 1600 Manufacturer: Berstorff, Germany Year of manufacture: 1998 Technical Specification: Working width: 1600 mm Steel belt width: 1750 mm Steel belt thickness: 1,8 mm Steel belt length: 15600 mm Rolls width: 1950 mm Center distance between frames: 2330 mm Heating roll diameter: 1500 mm Stretch rolls (I, II, III) diameter - 1000 mm Vulcanizing time: 1?30 min Working speed: 7?.210 m/h Max steam pressure in heating roll: 13 bar Max steam pressure in lower stretch roll: 8 bar Surface temperature of: Heating roll: ca. 195oC Lower stretch roll: ca. 175oC Pressure in heating zone between steel belt and rubber: 60 N/cm2 Main motor speed: 1 450 min-1 Drive position: Left from inlet Paint: RAL 6011 Air supply: 6 bar Cooling water supply: + 25oC Max hydraulic pressure Belt pressure tension: 250 bar Belt pressure regulation: ...

Precast Modular House Machine, Low Cost Precast Concrete House ERICH PETER MACHINES-PLANTS GMBH deals with complete solutions for the implementation of construction projects according to EU standards. We are not a construction company, but give the required knowledge in theory and practice to plan, calculate and implement construction projects. Business offers: ? Creation of necessary business, master and execution plans ? Sales of needed machines and plants for building material production ? Precast plant supply (new or refurbished) ? Plant commissioning and personnel training ? Concept & design for precast concrete projects as well as for multi-story wood structure buildings 5 key arguments: ? High speed buildings with short realisation time very important in all markets. ? High quality mainly in precast realised (minimized human failure) ? Low c ...

1 AUTEFA loose stock/flock stampfing press type 6.62 for stamping lose flock into materila carriers for dyeing / bleaching machines, with 2 stampfing arms with motorized rotational carrier support . complete with electrical panel

1. LBBC Autoclave (AC3) Working diam. 600mm (2ft) Working: 1500mm (5ft) Max. working pressure 100 PSI 2. LBBC Autoclave (AC3) Working diam. 750mm (2ft.6”) Working: 1200mm (4ft) Max. working pressure 80 PSI

QTY 1 x Berstorff Auma, Original year of manufacture 1972, Main Drum 1700mm wide x 1000mm dia, Aux drums 1700mm x 600mm dia, Steam heated, currently with 1660mm wide rubber coated woven steel belt, max pressure 192 Bar (approx 3000psi), 2 speed gearbox, Modern 5.5kW DC variable speed motor. Including let off and wind up units. Complete and in good working condition.

QTY 1 x used Berstorff AUMA  Serial no. AO 3178/75, year 1975, Main drum width +/- 2500mm Main drum dia +/- 3000mm Aux drum dia. 1400mm Thermal oil heating With Sandvik 2250mm 1650SM grade stainless steel belt 1.8mm thick. Hydraulic pressure 350kp/cm  With 40HP motor and 3 stage reduction gearbox. The main drum and steel belt are in good/serviceable condition (the drum and belt were replaced in 1990's).  Note ALSO Available: 1 x new/unused spare Sandvik 1650SM grade stainless steel belt, 2250mm wide (in original crate).

IROP Autoclave 6.25m long x 1.5m diam. Heating – Electric and steam For heating, works with three options (1 – Only electric with resistances; 2 – Only water steam; 3 – Electric + water steam). 165ºC calculation temperature Working pressure – 6 bar Test pressure – 7.5 bar Manufacturer – IROP Insurance certificate– (last technical inspection 12/08/2020; validity 12/08/2026) Year manufacture – 1976 There is a fan inside at the back. The fan sucks air from the centre and blows heated air through the wall. Around the fan there are 6 electric resistances for heating, also a circular tubular for water steam. The air passes though heating elements and rises the temperature. Total electric power – 50 kW. Last in use – March 2023

Scholz Steam Autoclave Year 1979 7 bar pressure Internal dims: 1.5m diam. x 2.6mm long Temperature 150deg C 10 x steam connectors Indirect steam Full rail system Machine overhauled 2016/17 Full safety certification available Complete with control panel

WE OFFER AN EXCELLENT CONDITION FULLY AUTOMATIC BANDSAW INCLUDIN DOCUMENTATION FOR CUSTOMER WE CAN ORGANIZE TRANSPORT AS WELL WE CAN ORDER FOR CUSTOMER RESERVE BLADES.

FMB ORION WITH LEFT AND RIGHT CUTTING ANGLE INCLUDING USER MANUAL AND SPARE PART DOCUMENTS MOVING VICE FROM LEFT TO RIGHT CUTTING CAPACITY LOOK ON PHOTOS ROUND: 240 SQUARE : 240X240 CUTTING ANGLE 1. - 45. 2. 0 ...TO60 FOR CUSTOMER WE WILL CLEAN AND PREPARE MACHINE FOR SHIPPING. AS WELL WE CAN OFFER TRANSPORT FOR OUR CUSTOMER

REF-2258 ANGELUS 60L AUTOMATIC CAN SEAMER WITH 6 SEAMING HEADS AND 24-VALVE VACUUM FILLING MACHINE Automatic can seamer with 6 seaming heads. Manufacturer: Angelus. Model: 60L. Can size: ø73mm. Complete with a 24-valve vacuum filling system (the vacuum pump is included). Overall dimensions: width 2,400mm, length 4,000mm, height 2,600mm.

LBBC Steam Autoclave Max. working pressure 100psi Max. working temperature 200degC Double ended Steam Operation Double doors at both ends Dims 40” (3ft) diam. x 92” (7ft.6”) long Safe work pressure 7.59 bar Vessel type 95/23 With boiler

- Pallet feeder - Navigator Touchscreen Control - 6 buckles in Folding Unit 1 - 2 knifes at S-KTL unit - Anti Noise hood - Palamides Alpha 700 delivery

Manufacturer: KRONES Series: Autokol Year of Make: 2005 Capacity: 10,000 B/hr Formats: 500ml, 800ml Label type: self-adhesive; front/rear

Record PANDA flow-packer with automotion in-feed system., In stock now, more information soon., More photos and full specifications: stcfoodsolutions.nl/en/machine/2006-record-panda-md-st-flow-wrapper-wi th-automotion-infeed/

The most cost effective solution for extruders up to 3.000 kg/h., Very compact shape, less metal to heat up., High resistance to pressures line (up to 350 bar)., Minimum material waste due to the continuous cotamination removal., Adjustable speed of the discharge screw allows the finest handling. Continuous cleaning allows to use filters longer than traditional technologies., Pressure is kept constant all the time for a more even process, Easy maintenance: filter replacement easier and faster, without removing machine’s components. Also available with an automatic opening system that makes opening and closing lid’s operations easier, faster and safer., Double screening system : 2 x Ø 370 mm., With laser screens (from 60 to 350 µm), punched screens (from 400 to 2000 µm),, metallic mesh screens (from 230 to 10 mesh)., Bespoke screens available since they are produced in-house., Lase ...

STRAUTMANN BALE TAINER, This particular vertical press has a storage space which allows to make multiple bales, automatically., 60 Ton, Materials: Paper, cardboard, PET bottles, film, Total installed power 11 kw, Drive power 5,5 kw, height of input point 1.370 mm., inpout point width 1069 mm, Balke size LxWxJ 1,1 x 1,1 x 0,9 mt., 3 panes, weight up to 400 kg. (3 disks), 4 -tie vertical bindings, Constructed in 2012, Good working conditions, Total dimensions: LxWxH 6,355 x 2,056 x 2,756, Weight 7.050 kg ca, installed power - used power in work: about 60-65% : 11

The most cost effective solution for extruders up to 2.000 kg/h (over 2.000 kg/h, see our item [SBG800](.germanplast.eu/listings/5070212-italian-fully-automatic-scre enchanger-doctor-blade-system)), You can afford one now to improve your material quality and (your workers job), Available in Ø 400-500-600-700 mm., With laser screens (from 60 to 350 µm), punched screens (from 400 to 2000 µm),, metallic mesh screens (from 230 to 10 mesh)., Bespoke screens available since they are produced in-house., Laser and punched screens withstand wear and high temperatures.They can be cleaned in a pyrolytic oven to be re-used several times., Counter-flow cleaning system, suitable for light contamination, is used with economical metal mesh., Compact, very easy maintenance., Low material waste., Contact us with your projects details:, - Kind of material, - MFI, - Throughput rate in kg/h, - % and kind  ...

LIFTING AUGER, for regrinds, box housing mm.400 outer Ø, internal spiral 300 mm Ø, bearings with dust protection, Length 8,5 mt., Collection hopper 900 x 500 mm (or bespoke), exhausting outlet, intermediate supports every 3 mt., Bonfiglioli gearbox, 5,5 kw drive, complete with Users manual. CE compliance and el,.drawings, installed power - used power in work: about 60-65% : 5.5, availability: ca 4 weeks from confirmation, conditions: new machine, type: to collect and lift materials

FIMIC RAS 325 SCRAPER, fully automatic screenchanger, screening surface 77.900 mm², Throughput: up to 600 kg/h depending on material and contamination, with scraping system, suitable for extrusion lines with capacity up to ca 500 kg/h or more depending on screening, Just disconnected, excellent conditions, constructed in 2017, immediately available, We can supply spare screens for this machine at competitive prices., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, availability: immediate, type: fully automatic

Used autoclave made by Jugema PPUH type Autoclave 250 (E). New 2017. Technical data: - Power supply: 3/N/PE AC 400/230V, - Power: 22.5 kW, - Working pressure: 3 bar, - Working temperature: 0 - 133 °C, - Test pressure: 4.5 bar, - Capacity 250 L.

AUTOMATIC SCREENCHANGER, number of screens: 2, total filter area: 1.342 cm2 cleaned by 6 scrapers, for the separation of soft contaminants such as paper, wood, aluminium, copper, foreign polymers, etc. from contaminated plastic melt., For rigid and soft PP max 30 MFI gr/10, 1.400 kg/h max moisture 3%, screening at 250 my., Scraper disc and scraper ensure remarkable efficiency thanks to their innovative geometry and the directly connected discharge channels. Contaminants are lifted from the screen immediately and forwarded to the coaxial discharge screw. The contaminants are removed under control and with a minimum of melt via this optimised discharge system., The scraper and discharge screw speeds are controlled fully automatically., - fast removal of contaminants through self-cleaning filter system with rotating scraper for screen cleaning, - high separation capacity and lowest melt los ...

Boom suitable for Volvo ECR 88 (year of construction 2005, s/n: 10296)

BIG pallet fork Volvo BM mount 2000 mm, - FEM 3, - Load capacity up to 4 t, - 2000 wide

BIG Adapter Volvo L30 to Euro mount

BIG Adapter Kramer to Euro mount

Used Roll Press FORTUNA, Machine Size 4 -In Bakery Condition- - 30 hollows per plate - Weight range: 40 - 110g - Condition: very good, - Video on request A viewing is of course possible by arrangement.

FIMIC RAS 325 SCRAPER, fully automatic screenchanger, screening surface 77.900 mm², Throughput: up to 600 kg/h depending on material and contamination, with scraping system, suitable for extrusion lines with capacity up to ca 500 kg/h or more depending on screening, Just disconnected, excellent conditions, constructed in 2023, immediately available, We can supply spare screens for this machine at competitive prices., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, capacity: 600 kg/h depending on material and mesh, availability: immediate, type: fully automatic

2 Pockets, Delivery, serial: 5105

An automated pallet handling system DMG Mori for machining centers is available. Pallet positions: 7, max. workpiece weight: 250kg, max. workpiece diameter: 500mm, max. workpiece height: 400mm, pallet change time: under 40s. Documentation available. An on site inspection is possible.

# Stratasys J750 mit DAP-Upgrade – PolyJet-System für anatomische Simulation Baujahr 2016 | Standort: Österreich Stratasys J750 mit nachträglich integriertem Digital Anatomy Package (DAP). Die Maschine arbeitet mit PolyJet-Technologie (PJP) und ermöglicht Multi-Material-Druck mit bis zu 6 Materialien simultan. Bauvolumen: 490 × 390 × 200 mm, Schichtstärke bis 14 µm. Das DAP-Upgrade erweitert die Standard-J750 um biomechanische Materialien zur Simulation von Gewebestrukturen. Einsatzgebiete: präoperative Planung, chirurgisches Training, Validierung medizintechnischer Produkte (Katheter, Implantate, Instrumente), anatomische Forschungsmodelle. Technische Ausstattung: Vollfarbdruck (über 500.000 Farbnuancen) Materialspektrum: Rigid, Elastomer, Transparent, Digital Anatomy Materials Datenformate: STL, OBJ, VRML Reproduzierbare Gewebehaptik für realitätsnahe Testszenarien Wirtsc ...

Almab automation with bundling and stacking, Automation for planing line 120 m/min with de-stacking and infeed system, outfeed with bundling and automatic stacking system, Consisting of:, - Infeed with tilt hoist, - Unscrambler, - Automatic infeed system, - Outfeed with buffer conveyor, - Semi-automatic bundle, - Mosca strapping machine, - Stacking system, - Outfeed for wood packages

D 545 AH Horizontal continuous film sealing machine for narrow or flat products., The pre-opened bags are sealed in a lying position, which is ideal for thin and flat products that cannot stand upright and would fall over when sealed. The integrated, height-adjustable conveyor belt can be pulled out up to 70 cm to seal larger products, as shown in the photos. Thanks to this particularly practical conveyor belt, you can seal packages of various sizes., This allows you to effortlessly provide almost all modern film types, including composite materials, with reliable, high-quality, 10 mm wide weld seams., More here:, .audion/de/webshop/verfugbare-produkte-im-webshop/d-545/d-545-ah-2/

Vacuum pump, Flow rate (m3/h): 35, Elec: 400 V / 50 Hz , Engine: Brook Crompton 1.5 kW

BIG Adapter Genie/Terex on three-point,  with adjustable lower link jaw hooks and detachable drawbar, Own weight approx. 190 kg, KAT 3

BIG adapter Manitou on three-point hitch, - with adjustable lower link hooks and removable hitch, - Net weight approx. 190 kg

Reebow auto stacking machine Automatic extraction and sorting machine (auto-stacking machine inclusive of control softwareV.10） Specification: 1. Strip off 5 loves/time (clamp type machine) 2. For nitrile glove production line with maximum speed of 160pcs/minute. 3. It can be used for 2.6~5.5g nitrile glove 4. Entitle to fulfill nitrile glove length 240±10mm if interested kindly contact; F31 Ms Aqilah (0176742799) Email: naqilah_m@topglove.com.my

Candle Filter System – Automatic, 3 Filters 2x Filter housings 30 x 3 FBFM33 1x Candle filter FBT013GNW25J 1x Sepex pump 1x Pump for injection of oenological product after filtration or reinjection of wine 1x Mounted on skid, fully equipped with fixed piping

FIMIC RAS+REF 400 FULLY AUTOMATIC SCREENCHANGER, screening area 1.206cm², for PP / LDPE / LLDPE / HDPE / PS / EPS / ABS / PVB, possible setting as : continuous scraping OR scraping on an Amp.threshold OR backflush, it was mounted on extruder producing 800 kg/h with 100-150 my screening, Always used as RAS (REF equipment brand new), 30 kw drive, totally checked in 2024 by constructor, Immediately available, remote connection (Industry 4.0) with pressure control system from pulpit, 4-5 spare laser filters available, multipolar plug connectors, We can supply spare screens for this machine., Laser screen from 80 to 300 µ - Mesh from 180 to 50, Punched screen from 400 to 2.000 µ - Mesh from 40 to 10, installed power - used power in work: about 60-65% : 30

This 3-axis EROWA Robot Easy Automation was manufactured in 2007. It features a maximum load capacity of 1500 kg and a magazine plate with 6 positions per level. The machine has a Z-axis travel of 75 mm and an M-axis capable of 360° movement. If you are looking to get high-quality automation capabilities, consider the EROWA Robot Easy Automation system we have for sale. Contact us for further details.

Size: 1420 x 1020 mm Equipments: Max. speed 6,000/h Gripper 18–22 mm Max. sheet 1420×1020 mm Min. sheet 700×500 mm Die-cut force 600 t Stripping station Intermediate sheet feeder Pre-pile device Working platform Cardboard 100–1000 g/qm2 & corrugated Tool prep table 6× chases · 6× stripping frames · 6× setup trolleys

BIG adapter Kramer large on three-point,  with adjustable lower link jaw hooks and detachable drawbar, Own weight approx. 190 kg, KAT 3

BIG adapter Kramer large on three-point,  with adjustable lower link jaw hooks and detachable drawbar, Own weight approx. 190 kg, KAT 3