au used for sale

Technical data for the extension tabs: Manufacturer: Bito Type: PRO The scope of delivery includes: 02x Extension tabs, used Material colour: sendzimir galvanised Total height: approx. 295 mm Total width: approx. 85 mm f. Frame profiles: P6, P5, P4 Depth: approx. 40 mm Material thickness: approx. 4.00 mm Weight | Pcs.: approx. 2.02 kg Note: No screw material included. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Тype: WALDYSSA 33 Stretchfilm wrapping machine Маx. trays dimensions L x B x H: 300 x 200 x 160 mm Мin. trays dimensions L x B x H: 110 x 90 x 10 mm Capacity: max. 28 trays / min Machine dimensions: Length: 2500 mm Width: 1450 mm Height: 1500 mm Voltage: 380 V, 50Hz Power: 2,6 kW Machine weight: 350 kg

Тype: WALDYSSA AUTOMAC 45 Model: B 223 ZR Stretchfilm wrapping machine Product dimensions in mm.: A: 120 min., 320 max. B: 120 min, 230 max. H: 10 min., 200 max. Capacity: up to max. 42 trays / min. Film type: shrink stretch Film dimensions in mm: L x S: 300, 250 min. L x S: 600, 700 max. Machine dimensions: length: 190,0 сm width: 170,0 сm height: 150,0 сm Voltage: 400 V, 50Hz Power: 3,9 kW Machine weight: 500 kg

Тype: FESSMANN AUTOVENT - 1 trolley Cooking: steam low pressure 0,5 – 1,0 bar , by steam jets and high spraying rate in to the AUTOVENT Connected load for Low Pressure steam 0,5 Bar; 45 kW; 70 Kg/ h Control panel: MC 3.1 Base width: 151 сm Base depth: 127 сm Height corpus: 250 сm Min. room height: 293 сm Recommended room height: 293 сm Trolley dimentions (HxBxT), сm: 198х104х102

Chain rubber belt conveyor, feed belt for recyclables, conveyor belt, conveyor belt, flat belt used HÖMA GmbH KGF 1200 Built in 1995 Length approx. 2.5 m Width band approx. 1150 mm Chain rubber belt Construction width approx. 1600 mm Gearmotor 1.5 kW Total dimensions: approx. 2500 x 1600 x 1100 mm The tape was used in the recycling industry and was used to feed paper and cardboard for a baling press.

Storage number: 3572 Various Manufacturer: GRUNDFOS PUMP , Type: CRK 4-100/10 A-W-A-AUUV Specifications: Rated Flow 66.7 l/min Stages impellers 12 pc Volt 380 v Depth of the pump 385 mm Engine Power 2.2 Max Print 8 Bar Weight: 29.6 kg

Storage number: 3574 miscellaneous Manufacturer: GRUNDFOS , Type: CR2-60A-A-A-AUUE specifications: Rated Flow 2.5 m3/h Volt 380 Engine Power 0.75 Max pressure 16 bar/120 C Bar Pressure height 37.7 m Weight: 15 kg

automatic storage CASSIOLI.

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Condition: hydraulic power chuck unused -Tensioning force: max 20 KN -Equipment: with soft interchangeable jaws -Chuck size: Ø 210 mm -Weight: 30.9 kg

4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Spare parts: for hydraulic power chucks different types -Chuck size: Ø 210 mm -Weight: 124.2 kg

Tool holder, milling holder, milling tool, cutter head -Take: SK40 3 pieces -Sizes: see pictures -Price: complete -Dimension box: 320/110/H150 mm -Weight: 3.5 kg

Tool holder, milling holder, milling tool -Intake: SK50 5 pieces -Sizes: see pictures -Price: complete -Dimensions box: 400/300/H270 mm -Weight: 42.1 kg

Used automatic labeling machine for cylindrical packaging, for self-adhesive labels (paper or foil), produced by ETMA, Germany, model R-TB - 150/2000. New: 1995 Marking labels with batch number / expiry date: hot-stamping.

Swimming / sinking system, swimming / sink container with discharge belt, washing bath, belt scrubber, belt washing machine for fruit and vegetables used Manufacturer: NUNBERGER conveyor systems Type KB 600 Filling height approx. 2 m Bathroom approx. 4 x 2.4 x 1.6 m Chain tape for discharge of sinking materials Bandwidth approx. 600 mm Belt drive with gear motor 1.5 kW (dismantled due to transport height) Total dimensions: approx. 5.5 x 2.4 x 3.1 m The plant was used in fruit and vegetable production. It is also possible to use plastic to clean. Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Punching tool for: holding dies -Borry hole diameter: 50 mm -Dimensions: 335/220/H180 mm -Weight: 42 kg

Tool holder, milling holder, milling tool, cutter head, adapter -Mill holders: SK40 3 pieces, clamping sleeve O 54/16 mm -Sizes: see pictures -Price: complete -Dimensions: 240/180/H70 mm -Weight: 4.8 kg

Tool holder, milling holder, milling tool, cutter head -Adapter: SK40 M20 2 pieces -Sizes: see pictures -Price: complete -Dimension box: 205/105/H140 mm -Weight: 3 kg

Load capacity - 1000 kg Outer diameter - max. 1200 mm Spreading range 550 - 750 mm Bandwidth max. 350 mm Spreading process - manual Reel drive - three-phase motor 400 V / 50 Hz Unwindspeed max. 30 m / min

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: 27/21 mm (pipe size 3/4 /1/2) -Socket: Ø 39 mm -Price: complete -Dimensions: 145/140/H75 mm -Weight: 3.8 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: 1x 40 mm, 1x 60 mm -Socket: Ø 32 mm -Price: complete -Dimensions: 130/270/H115 mm -Weight: 8.1 kg

Tool holder, milling holder, milling tool, adapter, clamping unit -Manufacturer: Walter, 41 pieces holder/clamping units SK50 -Various types: see photos, more pictures can be sent -Price/sale: complete -Total dimensions: 700/600/260 mm -Weight: 129 kg

Tool holder, milling holder, milling tool, cutter head -Recording: SK40 5 pieces Sizes: see pictures Price: complete -Box dimensions: 270/270/H160 mm -Weight: 15.2 kg

Radius milling cutters, end mills, end mills, milling cutters -Cutter: 8 cutting edges -Diameter: 47/65 mm -Socket: Ø 32 mm -Dimensions: Ø 65 x 130 mm -Weight: 1.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Manufacturer: SMW Autoblok, top jaws for power chucks 2 sets -Type: 012494 WAK 400-10, see photos -Hole spacing: 54 mm -Width: 34 mm -Price/sale: only complete -Dimensions: 170/190/H80 mm -Weight: 7.9 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson, 2 pieces collet holder -Type: Autolock -Adjustment: SK50 -Tension sleeves: Ø 25/16 mm -Cutter: Ø 44/11.5 -Price: complete -Dimension total. 175/285/100 mm -Total weight: 9.2 kg

Shell end mills, shell mill cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 105 x 19 mm, cross-cut -Socket: Ø 27 mm -Weight: 0.8 kg

Collet holder, tool holder, tool holder, milling holder, milling tool -Manufacturer: Clarkson, 3 pieces collet holder -Type: Autolock -Adjustment: SK50 -Tension sleeves: Ø 10/12/25 mm -Price: complete -Dimension total: 250/250/100 mm -Total weight: 14 kg

Tool holder, milling holder, milling tool, cutter head -Milling fixtures: 12 pieces of different designs, see photo parts list -Sizes: see pictures -Price: complete -Dimension box: 200/330/H180 mm -Weight: 14.4 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 3 pieces -Profile diameter: 1/2 1 1 1/4 , dimensions see photos -Socket: Ø 25 mm -Price: complete -Dimensions: 490/540/H190 mm -Weight: 8 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 6 pieces -Profile diameter: 32 to 80 mm, see photos -Socket: Ø 36 mm -Price: complete -Dimensions: 490/540/H190 mm -Weight: 50.1 kg

Tool holder, milling tool holder -Number: 2x SK50 recordings -various: versions -Price/Sale: only complete set -Weight: 12 kg

Tool holder, milling holder, milling tool -Number: 3x SK50 holders -different recording sizes: see pictures -Sale: only complete -Weight: 12 kg

Metal bellows coupling, claw coupling, connecting coupling, torsionally flexible coupling -Claw coupling: torsionally flexible claw coupling -Holes: Ø 22 mm / Ø 29 mm -Quantity: 1 piece available -Price: per piece -Dimensions: Ø 258 x 200 mm -Weight: 37.4 kg/piece

Die holder, notching tool, punching tool, punch, punching die, punching punch -Corner notching tool: punching on both sides -Material width adjustable from: approx. 200 to 440 mm -Stamping dimension: approx. 20 x 20 mm, see photo -Take: Ø 50 mm -Dimensions: 610/245/H380 mm -Weight: 122 kg

cutting diameter: 220 mm saw band length: 2455 mm table height: 850 mm cutting width: 230 mm cutting speed: 25 - 80 m/min dimensions of saw-band: 2455 x 27 x 0,9 mm : 90 mm : 90 mm : 90 x 100 mm : 150 Impact energy: 150 Air consume per blow: 150 x 210 : 220 mm stroke back stop: 210 mm cross-slide: 230 x 185 total power requirement: 1,2 kW weight of the machine ca.: 0,24 t dimensions of the machine ca.: 1,2 x 0,6 x 1,7 m Miter cuts to 60 ° left - cutting speed 35/70 m / min. - Vice with rapid clamping device - Bandsaw blade guide made of hard metal - Band tension control - Electric cooling automatic. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Quick change tool holder, tool holder head, quick change tool holder -Recording dimensions: see photos -Dimensions: 75/40/H60 mm -Weight: 0.7 kg/piece

Quick change tool holder, tool holder head, quick change tool holder -Recording dimensions: see photos -Price: per piece -Number: 6 pieces -Dimensions: 160/157/H54 mm -Weight: 3.5 kg/piece

Tool holder, milling holder, milling tool -Number: 2x SK50 holders -1x holder: Ø 27x 85 mm -1x holder: Ø 70 x 220 mm -Sale: only complete -Weight: 18 kg

Quick change tool post, tool post head, quick change tool post - Shooting dimensions: 90 mm -4x different versions: of steel holders available (pictures on request) -Price per piece -Length: 120mm

Quick change tool holder, tool holder head, quick change tool holder -Mounting dimensions prism: 72 mm by 90 mm -Number: 2x steel holder available -Price: per piece -Dimensions: 145/60 / H125 mm -Weight: 3.9 kg/piece

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 25 - 90 m/min total power requirement: 1,1 / 1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 210 mm : 290 x 210 mm saw band length: 2.965 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 + 70 m/min total power requirement: 1,1 / 1,3 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,3 x 0,8 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Quick-change tool post, tool post head, quick-change tool post -Mounting dimensions: 112 mm -Number: 5x steel holders available -Price: per piece -Dimensions: 160/55/H170 mm -Weight: 3.7 kg/piece

faceplate diameter: 510 mm max. pitch circle: 171,4 mm camlock: Gr. 8 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spindle for plate boring mill, table boring mill, boring mill, milling machine, quill, boring head, Replacement spindle -SK50 holder for: screwing onto the faceplate -Adjustment: SK50 -Dimensions: 220/220/H160 mm -Weight: 20 kg

Pneumatic press, pneumatic punch, multifunctional punch, punch, universal punch, punching machine -Pressure force: 0.23 ton -for: window making tools -pneumatic with: foot control -pneumatically operated -Air pressure: 12 bar -Stroke: max. 50 mm -Insertion height: mm -Dimensions: 690/720/H1485 mm -Weight: 51 kg

Tool holder, milling holder, milling tool -Number: 4x holder SK40 -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 5 kg

Fortuna dough dividing and working machine Type: A3 Completely overhauled repainted Division of 30 Weight range dough pieces 32-80 grams Dough insert per saucer 960-2400 grams with incubation electric head The robust design and duration oil lubricating of the transmission parts ensures a long service life Easy cleaning of the knife head 380V / 50Hz Weight of the machine approx. 640 kg Machine stands on a specially made wheelchair Dimensions: Height: 150 cm Width: 60 cm Depth: 70 cm The machine was completely dismantled and completely overhauled from the ground up. Then completely repainted.

Several used TiTech Autosort and Polysort 700 1.000 and 1400 devices available