128,875 used machines on RESALE, but how to find them? Machine Search
feed pressure: 8,5 bar liter capacity: . l total power requirement: 454 kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 160 , 8 , 1170
For sale is an Atlas Copco compressor 160KW Ser. No. AIF001037
Key data: 250 , 8 , 2322
For sale is an Atlas Copco ZR4 compressor Year of manufacture 1993 Bh. 98485 250KW Volume 1400-2322 m3/h Weight 4100kg
Second hand oil-free Atlas Copco ZR132. 132 kW with 7.5 bar and 19.10 m3/min. Water-cooled. Built in 2010 with around 39,000 hours.
Second hand oil-free Atlas Copco ZR400. 400 kW with 10 bar and 56.20 m3/min. Water-cooled. Built in 1997 with around 70,000 hours. High pressure element replaced at 45,000 hours.
Tested Atlas Copco ZR160VSDFF oil-free screw compressor. 160 kW Year of manufacture 2018 Only 27889 hours. Full service history. drum dryer integrated. Frequency-controlled.
Screw compressor Atlas Copco ZR90VSDFF Inverter and dryer integrated. 90 kW 8.75 bar 14.70 m3/min
used
Atlas Copco ZR160VSD oil-free screw compressor Inverter integrated. 160 kW 10.40 bar 25.90 m3/min Year of Make: 2008 Hours: 54,511
Oil-free screw compressor Atlas Copco ZR75FF Dryer integrated 75 kW 8.35 bar 11 m3/min Year of Make: 2004 Hours: 44,153
To check torque on air and electric screwdrivers.
Atlas Copco compressor type 1202 8784 82 ed 02, 1991, serial No. ARP11832-9
Screw air compressor Atlas Copco GA 408 59.586 hours of operation Masch. No. ARP 230-128 Built in 1994 Weight 1.2 to L x W x h: 250 x 130 x 200 cm Fqe3oovyi 8 bar 30 kW 2925 / min 380 V 50 Hz This machine is been serviced annually by Atlas Copco. The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
14-speed mounting screwdriver AC, for cylinder head mounting etc. Next: 3 spindle assembly screwdriver AC 3 and 6-spindle screwdriver ATLAS-COPCO 2 spindle screwdriver AC 3 spindle assembly screwdriver SPS & AC 1 spindle assembly screwdriver SPS
TO WHOM IT MAY CONCERN; WE VE USED ATLAS COPCO SCREW AIR COMPRESSOR. GA 55 AT STOCK PLS FIND SPESIFICATIONS ON BELOW MAWP. 9,1 bar. - 131psi VOLTAGE 440V 60Hz P motor 55kW 75hp YOB 2010 IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US PS: WE VE ALSO USED AIR COMPRESSOR ATLAS COPCO MAS GA 37 AT OUR STOCK. Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY
TO WHOM IT MAY CONCERN; WE VE USED ATLAS COPCO SCREW AIR COMPRESSOR. MAS GA 37. AT STOCK PLS FIND SPESIFICATIONS ON BELOW MAWP. 9.1 bar. - 131psi VOLTAGE 440V 60Hz P motor 37kW 50hp 2010 YOB MADE IN. BELGIUM IF YOU VE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US PS: WE VE ALSO USED AIR COMPRESSOR ATLAS COPCO GA 55 AT OUR STOCK. Aliaga Marine Services info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY
Pressure power: 10 bar Pressure power: 150 l/min. tank: 150 l cylinder: St. With tank from Boge 150 litersThe techn. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About usMore than 400 of our own machines in the warehouseMore than 8500 m² of storage space, crane capacity 70 tMore than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 75 , 10 , 691
Parameters: -Max. pressure 10 bar - capacity 691.2 m3/h - power 75 kW - Built-in dehumidifier - PREVENTIVE MAINTNANCE support in 2019.
SPECIFICATIONS: Air flow rate L/min: 6000 Operating pressure bar: 8 (variable max 13) Installed power KW: 30.0 Complete with inverter Operating hours: approx. 8000
Full container of premium second hand brands like Atlas Copco, Kaeser, Boge, CompAir, Almig, Ingersoll Rand for Export. All models available like GA, ZT, ZR, AS, ASD, BSD, CSD, DSD, SFL, L, etc.
Key data: 50
Atlas Copco GA50VSD Screw air compressor in good condition.
feed pressure: 10 bar Effective free air delivery: 252 L/min Receiver capacity: 90 l / bar Number of cylinders: 1 Stk. motor: 400Volt / 1,5KW V / KW turning speeds: 777 U/min weight of the machine ca.: 70 kg. range L-W-H: 0,97 x 0,5 x 0,9 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
feed pressure: 11 bar intake capacity: 480 cm³ volume capacity: 360 Receiver capacity: 270 l / bar Number of cylinders: 1 Stk. motor: 400Volt / 3,0KW V / KW turning speeds: 892 U/min weight of the machine ca.: 200 kg. range L-W-H: 1,6 x 0,7 x 1,2 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ATLAS COPCO screw compressor mod. GA37 – CE compliant – used - 37 kw - 7.5 bar - 104 l/s - matr. AII 318838 - year 1995 - COMPLETE WITH MANUAL AND CE DECLARATION
Key data: 30 m³/min, 7
Type: ZT 30 Year of Make: 2000 Power (kW): 30 Pressure (bar): 7.5 100% oil-free compressed air; Reduced energy costs; Applicable in: Pharmaceutical industry food and beverage industry; Electronics industry; Medical & Healthcare
Servocontroller ATLAS COPCO QCS 340 15 ( QCS34015 ) 4240 0329 81 regenerated ! Dimensions: 230 x 240 x 45 mm
Key data: 36 KW, 45 kVA
We currently offer: Number 46 Atlas Copco generator set Type: QAS 30/35 Engine Perkins Power: 45 KVA / 36 KW Hz 50 Rpm 1500 AVR control: UC. I22 dB 88 Operating hours 19807 Connector: 63A, 32A, 16A Metrics: L: 2.45m W: 1.10m H: 1.60m Weight: 1566 kg You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242
ID3679 Atlas Copco Mustang A66 CBT-HD year/Baujahr 2000 approx. 16.310 hours/hours 15 t Drilling rig, carriage BMI 6.7 (length 8750 mm, travel 6700 mm), drill head S1300, engine Deutz BF4M1013, diesel engine replaced at 10200 hours, hydraulic pump is new (drive wheel still needs replacing), generally good condition, regularly serviced (service records available) Drilling rig, mount BMI 6.7 (length 8750 mm, 6700 mm travel), drill head S1300, engine Deutz BF4M1013, at 10200 hours the diesel engine was renewed, hydraulic pump is new (drive wheel still needs to be replaced), generally good condition, service has always been done (service certificates are available)
Year of Make: 2014 Machine Number: API730798 Hours: 504 New compressor at 504 hours New operating hours display April 2025 Make: Atlas Copco Made in Belgium Oil-free scroll compressor Compaction: Spiral compactor Cooling: Air-cooled design Drive: Efficient motor with belt drive Control: fixed speed Control: Simple start/stop control Refrigeration Dryer: Integrated, Refrigerant R513A Electric condensate drain included Performance data Volume flow at operating pressure 6.75 bar 0.4 m³/min Operating pressure min. / max. 4.0 / 7.75 bar Total power consumption at 6.75 bar / full load 4.4 kW Nominal power motor 3.7 kW Engine rotation 2885 rpm Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 0 / 40 °C ∆ T above cooling medium temperature 0 °C Cooling air requirement 900 m³/h Free fan pressur ...
maximum number of results exceeded
please refine your search
