ass used for sale

Manufacturer: URT Type of Machine : Assembly Table Year of Manufacture: 2018 Certification: CE Marked Find more here - .ucymachines/ Contact us at - sales@ucymachines

M. No.: 2277

Universal screwdrivers, construction screwdrivers, screwdrivers, electronic screwdrivers, power screwdrivers, electric screwdrivers -Nominal consumption: 400 watts -Max. Screw capacity: 10 mm -Connection: 220 volts -Price: per piece -Number: 11 pieces -Dimensions: 420/140/H80 mm -Weight: 4 kg/piece

Longitudinal stroke X 11,000 mm Vertical stroke W 3,000 mm Vertical stroke Z 1,000 mm Transverse stroke Y 4,600 mm Work progress 3,000 mm/min Fast forwards 8,000/10,000 Maximum thrust on x-axes 30,000 N Maximum thrust on the Y 20,000 N axes Maximum thrust on Z 20,000 N Spindle engine power 71 kW Constant torque spindle speed range 0-58 g/min Spindle speed range at constant power 58-518 g/min Maximum spindle torque (intermittent service S6) 10,000 Nm Power voltage 400 Vac Power frequency 50 Hz Absorbed current 150 A Total installed power 125(170) kW

Servo motor, electric motor, DC motor, stepper motor, stepper motor -Max. speed: 3000 rpm -Torque: 1.9 Nm -Power: 0.6 kW -Shaft: Ø 19 mm -Design: B5 -with NIKKI-DENSO-Encoder-E2-1-2000-PR -Number: 5x stepper motors available -Price: per piece -Dimensions: 290/120/H180 mm -Weight: 11.4 kg

M. No.: 85039 // Model: 371 Equipment / Additional information: Ø max. 15 mm Distance between drills: 60-120 mm

Gripping pliers, clamping pliers, roboter plier -Manufacturer: ASS, gripper type GRZ 20-16 ROS with sensor -Piston: Ø 16 mm -Shaft: Ø 20 mm -Closing force: approx. 65 N -Sensor: ASS ES8-PNP -Quantity: 8x grippers available -Price per piece -Dimension: 130/30/H45 mm -Weight: 0.1 kg/pc.

Column crane, slewing crane, column slewing crane used Manufacturer: VETTER (presumably) Type: WIZARD AS10-5.0 (presumably) Year of construction 5/2006 Payload 1000 kg Swivel range 270° Projection from column: approx. 5.4 m, boom profile height approx. 37 cm Bottom edge boom to floor: approx. 3.8 m Total height: approx. 4.3 m Base plate diameter approx. 1.2 m The previous owner has mounted a smaller base plate. In order to really use the 1000 kg, a 1450 mm base plate must be mounted (as can also be seen on the type plate)

Anchor plate, door holding magnet, door magnet -Type: ASS 65 -Quantity: 3 available Price: per piece -Weight: 0.3 kg

Double mandrela coil weight each side: 1 ton Material width: 200 mm Coil exterior diameter: 2.050 mm Expansion range: 350 - 640 mm Speed: 40 s.p.m. Required power: 5,2 kW Weight of machine approx.: 2,2 ton

Cutting length: 2520 mm, cutting thickness: 4 mm, voltage: 380 V, power connection: 16 A. The blades of the shears are likely no longer able to be sharpened due to wear and tear and would need to be replaced. On-site inspection is possible.

General SKU309S499 MakeApex Engineering Industries LTD. (UK) LocationBarneveld CEcheck Type143 ASS - MK.VI Main Features MaterialStainless steel Motor0.75 KW Specified Features - Sieve granulator Granulating sievecheck With hoppercheck Inlet360x320 mm Outletdia. 150 mm Motor0,75 kW 230/400 V (Ex) With variable speed drivecheck MaterialStainless steel General No.A46248 Year of construction1996 Mounted on stainl. st. framecheck Mounted on wheelscheck With switchcheck Floor space1,3x0,8 M Total height1,6 M Weight400Kg ATEX designedcheck Extra Specificationssieve is missingPowdered foodsSieve granulatorsFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesCosmeticsFood additivesSugarAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsMinerals & inorganicApexIndustries > Food & Feed > Powdered foodsSieves > Sieve granulatorsIndustries > Che ...

General SKU251N176 LocationBarneveld MakeMeccanica Spadoni Srl TypeASSO 15 No.04FSSA0003 Main Features MaterialStainless steel Motor1.5 KW Surface15 m2 Specified Features - Rotating vacuum filter Rotating vacuum filtercheck Filter surface15 m2 Motor1,5 KW, 230/400 Volt With knife dischargecheck Mechanical operatedcheck Motor0,37 KW, 230/400 V With liquid pumpcheck Motor11 KW, 400/690 Volt MaterialStainless steel General Year of construction2004 With switchgearcheck Floorspace+/- 9,1 x 2.4 M Total height2,2 M Weight+/- 3000 KGPowdered foodsStarchBiotechnologyAgrochemicalsSpicesPlastic & polymersRotating vacuum filtersCatalysts & fillersFeed additivesFood additivesSugarAnimal feedSolid pharmaceuticsBeveragesDyes & pigmentsMinerals & inorganicSpadoniIndustries > Food & Feed > Powdered foodsIndustries > Food & Feed > StarchIndustries > Chemical > BiotechnologyIndust ...

Automatic desiccant cap assembly line (silica gel). Equipped with a dual-lane system and a multi-position rotary carousel, featuring cardboard punching units, volumetric dosing, plastic seal insertion, and quality control by machine vision and dynamic weighing. Year 2012. In good condition.

Size: 2000 x 950 mm Equipments: Electric Modular Dryer Forced Hot Air System dimension 3800 x 1250 x 2170 mm POWER 15 kW 27 A weight 650 KG

4700 pcs. used underlay boards Assyx Dimensions 1400 x 1000 x 50 mm

Nauta type dryer manufactured by NAUTAMIX ASSEN suitable for drying powders, granules, pastes and sludge. Overall dimensions Maximum diameter in the body 1500 mm Minimum body diameter 280 mm Material Stainless steel Shirt or mid-calf material Iron Technical characteristics Year of manufacture 1979 Working Body Pressure 0.007 bar Working Body Temperature 130 ºC Total Body Volume 1905 L Half-calf/liner working pressure 5 bar Half-round/sleeve working temperature 160 ºC Half-calf/shirt volume 111 L Engine 3.6 kW - 1430 rpm ENGINE 2 0.37 kW - 1300 rpm Equipment Setup Shirt Transportation Information Length 1700 mm Width 1700 mm Height 3000 mm Documentation No documentation Status Refurbished Manufactured by NAUTAMIX ASSEN (HOSOKAWA)

This 4-axis HUNDEGGER K2 was manufactured in 2002, designed for efficient wood beam processing. It features a loading area with motorized chains, a maximum beam length of 13,500 mm, and a working section up to 440 mm × 240 mm. Includes a circular saw and universal milling unit, both with 4 axes, alongside versatile drilling units. Ideal for complex woodworking tasks. Contact us for more information about this machine.

This 3-axis LVD Load-Assist 4020 was manufactured in 2019. It features a maximum sheet size of 4000 x 2000 mm, making it suitable for various applications. If you are looking to get high-quality automation capabilities, consider the LVD Load-Assist 4020 machine we have for sale. Contact us for further details.

We are offering for sale a complete cable assembly line composed of the following equiptment: - Komax Alpha 433 L Fully Automatic - Komax ADS 123 Wire Storage - Safety Enclosure - Extraction System (AAT 260) - Operating Computer and Control - Various Crimping and Processing Modules - Further Accessories Available Upon Request Condition : Fully Functional Year - in between 2008 - 2012 Find more here - .ucymachines/ Contact us at - sales@ucymachines

4500 Underlay boards - Production pallets, Fabr. ASSIX, Type Duro Board are given away at a special price, as the customer needs the space - Dimensions: 1400 x 1050 x 60 mm Beech wood panel glued on both sides with extremely impact-resistant and break-resistant polyrethane coating this creates a closed, seamless surface

Year of Make: 2001 Serial Number: 07017580 Auction-ID: A1-49723-18

Crimping force at 12 bar: 8 to Pressure to 4 bar: 4 Table size 280 x 280 mm Height 350 mm RADIUS 160 mm Weight 350 kg W x D x H approx. 0.5 x 0.75 x 2,15 m -Stroke adjustment with fine Skallierung: 0.02 mm -Anti-rotation -pneumatic foot switch

Total height 1500 mm Total length 3000 mm 5 pneumatic cylinders Compressed air pressure 8 bar Travel of pneumatic cylinders 100 mm Diameter of pneumatic cylinders 100 mm

POWER ELECTRONICS ASSY - CONTROL BOARD FOR FILLING MACHINE VEMAG TYPE 134 ROBBY II - / PC 880 / ARTICLE NUMBER VEMAG: 871.371-004 871.380-002-574733-5LP210695 871.360-102 - 871.360-002 072.999-005 875.821-005 - 871.821-105 871.370-004 - 871.370-701 Request a quote iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-BiaÅ?a USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36

MontagePRESSE with central lubrication, pneumat. Feed and PLC control. Documents More info on request

Valve terminal, valve assembly, 50E-F14GDQSERYKJUXUXIX….., Festo, new Absolute special price ! Attention: Original Festo product, no replica from.. We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price is € 4.450 excl. VAT. If you have a UID number, we will gladly issue an invoice without VAT. New in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely new and in ist original packaging. Valve terminal, valve assembly from Festo MPA-FB-VI, 50E-F14GDQSERYKJUXIXPXNY-D-UL1-EX1E+M, 32P-SGK-R-MAASVAIIIU-10KKSL The valve terminal consists of 44 valuable Festo components: 1) 1 piece of angle, CPX-EPL-EV, 195716, 2) 1 piece linking block, CPX-GE-EV-S-VL, 8022170, 3) 7 pieces of in ...

Cast iron bed Length: 3970 mm Width: 2060 mm Useful surface (L x W x H): 3910 x 2000 x 350 mm Delivered with 6 levelling feet Weight: 7 T MACHINE IN OUR STOCK IN FRANCE.

Dates will follow later!

Marble plate Length: 1045 mm Width: 510 mm Thickness: 110 mm Height on feet: 930 mm Weight: approx 1 T

Valve terminal, valve assembly, 50E-F14GDQSUXYKJNY…., Festo, new Absolute special price ! Attention: Original Festo product, no replica from.. We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price is appr. € 2.680 excl. VAT. If you have a UID number, we will gladly issue an invoice without VAT. New in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely new and in ist original packaging. Valve terminal, valve assembly from Festo MPA-FB-VI, 50E-F14GDQSERYKJ-D-UL1-EX1E, 32P-SGK-R-MASVAIIIU-7KL The valve terminal consists of 26 valuable Festo components: 1) 1 piece of angle, CPX-EPL-EV, 195716, 2) 1 piece interlinking block, CPX-GE-EV-S-VL, 8022170, 3) 3 pieces of interlinki ...

Valve terminal, valve assembly, 50E-F14GDQSERYKJ-D-UL1-EX1E, Festo, new Absolute special price ! Attention: Original Festo product, no replica from.. We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price is appr. € 2.250 excl. VAT. If you have a UID number, we will gladly issue an invoice without VAT. New in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely new and in ist original packaging. Valve terminal, valve assembly from Festo MPA-FB-VI, 50E-F14GDQSERYKJUXIXPXNY-D-UL1-EX1E+M, 32P-SGK-R-MAASVAIIIU-10KKSL The valve terminal consists of 26 valuable Festo components: 1) 1 piece of angle, CPX-EPL-EV, 195716, 2) 1 piece interlinking block, CPX-GE-EV-S-VL, 8022170, 3) 2 p ...

Platform trolleys, transport trolleys, assembly trolleys -Length: 1600 mm -Depth: 860 mm -Height: 1670 mm

Cast iron beds Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Equipped with Levelling feet Weight: approx 3 T

0: 2750 mm Working height: 2500 mm 0: 300-1000 mm RUCHSER glazing and sealing table RU-SW3-90° year of manufacture 2022 ----------------------------------------------------- Vertical work table with lifting device and turning device. Especially Suitable for glazing and sealing wooden windows on both sides. Furnishing: System part covered with felt Infinitely variable pneumatic lifting device, Stroke of 300 mm - 1000 mm, based on roller conveyor height Turning device for sealing on both sides, with roller conveyor 150 mm roll length 2 pneumatic tensioners for clamping the window to the turning device Version with special turning device for pushing through the on the Roller conveyor set up window with applied (closed) turning device Equipment demonstration machine, alternative/optional equipment on request! Pos. 1.0: Item no.: 1000000 RU-SW3-90° vertical work table for Wooden window with ...

TO WHOM IT MAY CONCERN ; WE VE BELOW LISTED USED PARTS OF DEUTZ TBD 645 L CYLINDER HEAD EXHAUST CAGE - VALVE SPRING AND ROTOTOR ( LEFT ) 12PCS EXHAUST CAGE - VALVE SPRING AND ROTOTOR ( RIGHT ) 12PCS INJECTOR HOLDER WITH NOOZLE COOLED TYPE 12PCS AIR STARTER 12PCS FULL ROCKER ARM ASSY 12 PCS PLS REFER ATTACHED PICTURES. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

SPECIFICATIONS: Machining center for final processing and assembly of fittings on windows and doors Dimensions workbench mm: 2,800 x 1,250 Three-spindle drilling unit for grip holes Pneumatic system for reading and cutting window handles "Cremonese" Tilting workbench Complete with pneumatic screwdriver

Marble plate STOLLE Length: 3500 mm Width: 2500 mm Thickness: 305 mm Height on feet: 900 mm Delivered with 12 levelling feet Weight: 6,3 T

PLC control, central assembly, work memory, CPU -Manufacturer: Siemens -Type: Simatic S7 6ES7 414-3XJ04-0AB0 -CPU: 414-3 -Dimensions: 210/50/H290 mm -Weight: 1.3 kg

2 x 10 T, adjustable from 1.3 to 10 T Plunger size 250x250mm forward 10 mm second Backwards 25 mm second Travel 100 mm per side, Interior 200 to 400 mm Two-hand operation Motor 1 KW Tank for 60 L hydraulic oil the machine can also be supplied in other sizes and thicknesses.

PLC control, SIMOTION MOTION controller C240, central assembly -Manufacturer: Siemens -Type: 6AU1240-1AB00-0AA0 -Number: 20x controls available -Price: per piece -Dimensions: 200/125/H120 mm -Weight: 1.3 kg/piece

PLC control, SIMOTION MOTION Controller C240, central module -Manufacturer: Siemens -Type: Simatic S7 6ES7 318-3FL00-0AB0 -Number: 9x controls available -Price: per package -Dimensions: 120/120/H115 mm -Weight: 1.3 kg

With the device, upper and lower parts were previously joined together and pressed. Components are Kuka Scara KRC2sr Robot BJ 2010 Pneumatic control Electrical control with frequency converter 4 conveyor belts Description Robotor Type KR 5 scara R350 Working space volume KR 5 scara R550-Z320: 0.264 m3 Repeatability (ISO 9283) KR 5 scara R350: ±0.015 mm Reference point Working space Intersection of axes 3 and 4 Weight approx. 20 kg Datalatt Robot

Component slide unit, pneumatic cylinder, air cylinder, pneumatic plunger, air plunger -Stroke travel: 50 mm -Air inlet and outlet: adjustable -Weight: 3 kg

PLC control, central module, RAM, CPU, central unit, central device -Manufacturer: Siemens, Simatic S7 Ovp -Type: Simatic S7 6ES7 414-1XF03-0AB0 -CPU: CPU 412-1 -Carton dimensions: 310/230/H35 mm -Weight: 1.0 kg

PLC control, central module, memory, CPU, central device, positioning module -Manufacturer: Siemens, positioning module Simatic S5-100U CPU 102 -Type: 6ES5 266-8MA11 -Quantity: 1 piece available -Dimensions: 100/45/H135 mm -Weight: 0.3 kg

Marble plate STIEFELMAYER Length: 3000 mm Width: 1500 mm Thickness: 350 mm Height on feet: 600 mm Number of feet: 6 feet Weight: approx 4 T It was used as a coordinate measuring marble. 2 same marble plates available.

Cast iron bed 1305 x 800 x 100 mm - No 1 Length: 1305 mm Width: 800 mm Thickness100 mm Height on feet: 510 mm T-slots dimensions: 40 x 25 mm Weight: 500 kg