127,580 used machines on RESALE, but how to find them? Machine Search
Key data: 45 °, 2800 mm, 800 mm
Sliding Table Saw Table Saw Circular Saw Carpenter Saw Altendorf Type: F45 Year: 1978 Sliding table length: 280 cm Trimming width/ rip fence approx.: 80 cm Parallelogram Guard with Top Extraction Hood Boom table with cut-to-length stop Miter stop Motor power: 5.5 KW Condition see pictures, or follow the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. the indicated shipping costs are an approximate price, depending on the distance and unloading option, they may vary. Please inquire. The item offered is offered with differential taxation. The sales price shown is the gross final amount. An invoice with VAT will not be issued. ...
Unaudited Auction-ID: A7-45427-219
1 piece EISELE PSU 450 H metal circular saw Technical data: Saw motor ‐ variable speed by pole switch Gearbox Max. saw blade diameter Ø 450/40 mm, thickness 4 mm (HSS) Clamping cylinder ‐ vertical Long stroke ‐ horizontal Clamping pressure adjustable Operating pressure Mitre cuts Machines ‐ Dimensions W/H/D D=100 x 160 mm D=50 x 8 mm 30 bar. 50 bar. 30°/45°/90°/45°/30° 1000/1860/1330 mm
Offer 26098 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° to : around 130 mm - Square 120 mm - flat 305 x 40 mm - or 240 x 85 mm - Mitre adjustable left + right 0 - 90 ° - at 45° around 130 mm - flat 245 x 30 mm - or 180 x 70 mm - Feed speed of the saw blade infinitely variable 0 - 10 m/min - Saw blade cutting speed 13 / 26 m/min - Saw drive 400 V / 1.7 / 2.6 kW - Hydraulic drive 400 V / 0.75 kW - Hydr. Material vise, infinitely adjustable clamping pressure - Hand crank for fine adjustment - Restraint adjustable - Coolant device - Discharge roller conveyor with dimension stop 5000 mm - Feed roller conveyor 4000 mm - Space requirement approx. W 800 x H 1770 x D 1020 mm - Weight approx. 950 kg
An old segment cold circular saw Wagner Reutlingen is available. Series: 1, roller conveyor length: 4500mm, machine dimensions X/Y/Z: approx. 3000mm/1500mm/2300mm, weight: approx. 3000kg. An on-site inspection is possible.
Saw blade diameter: 400mm, miter range: +/-90°, max. round material cutting capacity: 130mm, max. square material cutting capacity: 120mm, max. flat material cutting capacity: 305mm/20mm, machine dimensions X/Y/Z: approx. 1050mm/900mm/1850mm, weight: approx. 850kg, on-site inspection is possible.
Speed 3600 1/min Saw blades up to diameter 350 mm Mitre left + right. 45° and bevel cuts up to 45° l. Cutting range: 90° 120mm round, 105mm square, 200x80mm flat 45°L 65mm round, 60mm square, 180x50mm flat 45°R115mm round, 100mm square, 150x80mm flat incl. short roller conveyor
Manual pull-down miter saw with metal support bench Estimated weight: 80 kg Approximate dimensions: 1200x800xh1500 mm Auction-ID: A7-44996-157
Main motor 5.5kw 3 RPMs Maximum saw blade -350mm Scoring 0.75KW -120mm Parallel guide on the right side - manual Adjustable up to 1230mm Tiltable 0-45 degrees Height adjustment (up/down) Dust extraction included - connected to the same 380 circuit Saw blade for solid and sheet material Cavity knife available Auction-ID: A3-43511-19131
TECHNICAL SPECIFICATION max. diameter of saw blade: 460 mm cutting capacity round: 146 mm cutting capacity square: 138 mm mitre cutting: no .. oblong: 250 mm .. .. x: 100 mm .. to: 220 mm/min DIMENSIONS / WEIGHTS space requirements -left/right-: 2200 mm space requirements -front/back-: 1950 mm total height: 2000 mm total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60%
Key data: 45 °, 3000 mm, 1100 mm
MARTIN T74 Classic YOC 2007 Main sawing unit: 5.5 kW Rated current: 22 A 3 speeds (2,800 / 4,000 / 5,500 rpm) Swivel: 0 – 46° Sliding carriage length: 300 cm Electrical positioning of the rip fence: 1.10 m (CNC) Rip fence can be lowered manually max. saw blade diameter: min. 250 mm / max. 500 mm max. cutting height: 170 mm Height and swivel adjustment: electric motor 5.7" touchscreen control Digtial length stop Parallelogram cross table with digital display Main Saw Blade Change: ProLock Central lubrication Compressed air supply required Operating hours read: 596 h Extraction connection: 120 + 100 mm Weight: approx. 1900 kg
Equipped with: adjustment knob, protected saw blade Auction-ID: A1-41992-87
Saw blade diameter 350-400 mm, cutting speeds 9-20 m/min, hydraulic flow rate 6 l/min, feed speed 0-1000 mm/min, express return 1800 mm/min Auction-ID: A1-45714-44
Circular saw machine KALTENBACH for Aluminum and non-ferrous metals Model: SKL 400 H Continuous diameter: Ø 400 mm Cut area 90° Round material: 130 mm Square material: 120 mm Knit profile: 315 x 40 mm 45° Profile lying: 220 x 60 mm Profile stehend: 80 x 120 mm Cutting speeds for HSS and HM stool sheets: 1300 / 3000 m/min For HM-Sägeblätter: 1750 / 3500 m/min Brake motor 1430 / 2880 n: 3.7 / 4.5 kW Saglatt Advance speed stufenloos adjustable: 0 -1100 mm/min Slope of the Sägeblattes: 3000 mm/min Machine weight: 650 kg Dimensions W x D x H: 1000 x 1300 x 1950 mm Auction-ID: A1-41992-94
CIRCULAR SAW - MEP COBRA - N° 017048 NTR SERIES FOR ALUMINIUM Auction-ID: A1-45663-22
Excellent condition - Fully operational - Loading / Transport possible! hood for miter cuts, 2cnd longitudinal fence and hold-down
Excellent condition - Fully operational - Loading / Transport possible! saw blade diameter max 500 mm speeds 2000 to 6000 1/min cutting length 5,000 mm guide slot width of the riving knife 13 mm voltage 400 V current 35 A frequency 50 Hz main motor make ATB type YAF 112 M/21-11 power 5.5 kW digital length stop scoring saw saw blade diameter 120 mm diameter of the tool holder 22 mm scoring motor make ATB type MAF 80/2 A-11 power 0.75 kW , 8200 1/min includes vacuum table and 2 pcs. Laser splitting wedge Altendorf 3 pcs insertion protection Altendorf Leitz throat milling disc
RM Group PS 400 (2011) sliding table saw with sliding carriage, ideal for precise cutting of panels and solid wood. Robust machine, equipped with digital display, in good working order. Auction-ID: A3-43515-38046
Equipped with coolant pump, On and including pallet Auction-ID: A1-45383-20
Equipped with coolant pump, On and including pallet Auction-ID: A1-45383-21
Manual control is missing, pallet and lashing strap not included. Auction-ID: A1-45383-25
saw blade diameter:400 mm cutting diameter:400 mm material:Vollmaterial 20 - 130 mm material:Walzprofile 40 - 120 mm material diameter from - to::Rohr u. Profilfrohr bis 100 x 14 mm sawblade width:4 mm total power requirement:5,1 kW weight of the machine ca.:1850 kg dimensions of the machine ca.:3300 x 1630 x 1960 mm Documents:vorhanden
Vertical band saw PEHAKA type SM 4Fabr. No. 27060 Year of construction approx. 1980Projection 380 mmTable size 620 x 480 mmCutting height 250 mmRoller diameter 400 mmWorking height 1120 mmSaw blade length min. 2900 - max. 3100 mmSaw blade speed 22-125 m/min. infinitely variableMotor power 0.6 / 0.75 kWNet connection 380 volts, 50 Hz- infinitely variable saw blade speed via Vario belt drive with lever adjustment and 2 motor speeds- Saw table tiltable +/- 15- Saw blade butt welding machine IDEAL BS 0-16-
Circular tester for crankshafts, camshafts, rotor shafts, etc. Reworked. Tip width 440 mm Peak height 200 mm Bed re-ground. Device repainted Dimensions: LxWxH 1000x600x1100 mm Weight approx. 300 Kg Colour: Light grey
10 piece blade 80 x 40 x 1 mm (or 70 x 40 x 1) mm for belt cutting machine. NEW. Larger quantities available!
Traenklein; good condition; cleaned and checked; Table-to-table; Knife 9mm.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.
High-quality, PLC-controlled circular shears / circular, blank and flange ring shears with punching device used - refurbished PLC – Control for 120 cutting programs with 30 program sets each Projection in tailstock 1,000 mm Automatic tailstock clamping Outreach in the shear station 400 mm Shear performance 0.5 to 5 mm sheet steel 400 N/mm² 0.5 to 3 mm stainless steel sheet 650 N/mm² Largest shearable disc diameter Ø 1,400 mm for rectangular starting material Ø 1,800 mm for octagonal starting material Smallest shear diameter 150 mm Diameter Ø shear knife 100 mm Shear rate up to 35 m/min punching diameter at S = 2 mm sheet steel 400 N/mm² - Ø 25 mm at S = 3 mm sheet steel 400 N/mm² - Ø 17 mm Drive power 7 KW Weight 1.300 kg Dimensions 2.7 x 1.8 m x H 1.7 m Optionally available with a flanging device – Maximum board height 20 mm Large ...
We supply round and flange ring shears (circular shears) in two sizes - 3/1300 and 5/1800 Our KS circular shears are PLC - controlled hydraulic - electromechanical machines designed for the production of rounds and flanges made of steel sheet, VA stainless steel sheet, Aluminium and non-ferrous metal sheet, maximum shearing performance for sheets with a tensile strength of 400 N/mm2 - 0.5 mm to 3 mm or 0.5 mm to 5 mm, smallest / largest cutable circular board 150 mm / 1,300 mm or 1,800 mm respectively – cutting speed up to 35 m/min, drive power 5 kW or 7.5 kW, weight approx. 2,000 kg and 3,000 kg
PLC - controlled round and flange ring shears (circular scissors) This can also be expanded into a combined circular scissors - flange machine. We supply the machine in semi-automatic design and as a fully automated production island. Rounds and flanges (sheet rings) made of steel sheet, VA stainless steel sheet, aluminium and non-ferrous metal sheet can be cut, maximum shear performance for sheets with a tensile strength of 400 N/mm2 - 0.5 mm to 12 mm, smallest / largest cutable circular board 500 mm to 2,200 mm – cutting speed up to 25 m/min, drive power 15 kW, weight of the base machine
table diameter: 400 mm workpiece weight: 315 kg table height: 360 mm max. height (90° position): 635 mm height of the swivelling axis: 240 mm distance table center - swivel center: 485 mm center bore: 40 mm rotation movement: 360 ° reading accuracy of turning index: +/-4 ° swivel movement: 90 ° power capacity: kW weight of the machine ca.: 0,31 t dimensions: 850x450x360 mm • new-valued, manual operated, swivelling rotary indexing table, • H4 = indicating system for circular movements 0 - 360 ø +/- 4 above optic, • S20 = indicating system for swivelling movements 0 - 90 ø +/- 20 above scale ring, • B = manual operation for 0 - 360 ø, • B = manual operation for 0 - 90 ø, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Complete coil-fed cutting and feeding line for disc production Composed of: • Feeder/Decoiler: LARA DEMAE-10000/100/1400-D • Cutter: TIMAC TZZ-1604 with double-station stacker • Shear and feed table up to 1400 mm by LARA Condition: In operation, ready for production. Designed mainly for working with carbon steel, stainless steel, and aluminum. The installation combines a servo-driven straightener-feeder from LARA with a TIMAC circular shear, scrap-cutting shear, and automatic double-station stacker, allowing for continuous, precise, and safe operation. Main components: Hydraulic motorized decoiler with loading cart and loop control via laser sensor. Equipped with safety barriers in the coil loading area for optimal visibility during the decoiling and cutting process. Combined straightener-feeder with 11 rollers and AC servomotor controlled by PLC + touchscreen HMI. TIMAC ...
Replacement blades for cutting machines, circular blades, round cutting blades, machine blades, -Blade size: 350x40x3 -Serial number: 2162928 -Material: 4112-22N Martensitic stainless steel -Number: 6x available -Price: per piece -Dimensions: 350/40/3 mm
Circular knives, circular cutting knives, machine knives, replacement knives for cutting machines -Circular blade: Replacement blades for cutting machines -Blade size: 400x30x3 Serial number: 207484 -Number: 3 knives available Price: per piece -Weight: 2.9 kg/pc.
Year of construction : 1995 Specifications: Cutting capacity 37 kG/ mm" 5 mm Cutting capacity 70 kG/mm" 3 mm Cutting speed 35 m/min Blank diameter 180 – 1200 / 1600 mm
Circular vibrating screen, brand: Roto Sieve, diameter: 1,120 mm, power: 3 KW (4 hp), in stainless steel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.
for round diameters 70 - 1500 mm Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working width: 1000 mm Sheet thickness steel: 1.5 mm Machine weight: 150 kg Dimensions/: 1200 x 800 x 1200 mm Colour: blue Projection: 350 mm Machine number: 4447
Guided tour with a trolley DRECKSHAGE TAG-16-S 1 Trolley: 84 x 53 mm Guided tour: Ø 16 x 250 mm used, tested ! Dimensions: 250 x 465 x 42 mm
Circular Divide Table, Round Table, Rotary Table RECORD Ø 300 mm Table height: 122 mm Groove width: 16 / 27 mm used, tested ! Dimensions: 500 x 470 x 160 mm
Circular dividing table W M W manually and electrically adjustable with 3-jaw chuck 250 mm rotary table Ø 500 mm clamping grooves 6 x 14 mm used, tested ! Dimensions: 500 x 650 x 300 mm
Rotary Table, Round Sectioning Table, Circular Dividing Table PAGUS Ø 250 mm Table Height: 115 mm Groove Width: 12 / 20 mm < br /> groove depth: 22 mm centering hole in the table: Ø 23 mm A drive shaft with spline shaft profile: Ø 13 / 17 mm, 4 wedges, wedge width: 4 mm used, checked! Dimensions: 500 x 450 x 155 mm
Max. sheet thickness: 2 mm steel Max. blank diameter: 1000 mm Motorized drive via foot switch
Completely overhauled screen round feeder with a diameter of 1,900 mm. In the course of the overhaul in 2025, the gearbox was completely dismantled and cleaned, all bearings and shaft seals were replaced, a pinion shaft and a bevel gear were reupholstered. The oil pump and the platter drive were overhauled, oil heating systems were renewed, etc.
Motor-driven circular shears FASTI type 502 - 10 - 2Masch. No. 9252 009 Year of construction 1992Material thickness max. 2 mm (400N/mm²)Maximum blank diameter 1000 mmMinimum blank diameter 100 mmCutting shaft speed 60 and 120 rpmCutting speed 12 and 24 m/min. Knife holder 20 mmKnife diameter 65 mmProjection of the clamping plate 720 mmProjection of the cutting wheel 280 mmMotor power 1.1 / 1.4 kWWeergized connection 380 volts, 50 Hz- 2 motor speeds- mechanical clamping tip-
maximum number of results exceeded
please refine your search
80 € 
