ari circular saw used for sale

Elumatec circular saw

Serie: 2070 Zaagbladdiameter: 500 mm Maximale snelheid: 2800 tpm Gewicht: 320 kg

Manufacturer: Paul Year of Manufacture: 2012 Type of Machine : Resaw Circular Saw Upgrades and Refurbishment - 2019 -- New drive motor installed: 250 kW - 2019 -- Process flow optimisation carried out Find more here - / Contact us at -

Qty. 1 Second-hand log homogenising furnace Mfc.: Rackwitz Industrieanlagne GmbH Built: 2009 Annual production: 50.000 tons mix Furnace charge max.: 25 tons Furnace performance: 6 - 7 t/h of 10 LOG Logs diameter: 103 mm - 405 mm Logs length: 7,000 – 7,300 mm Type: Cross circular Furnace cross circulator 3 pieces Heating zone Furnace Dimensions: 30.300 mm x 3.400 mm x 11.000 mm – L x W x H

Raimann ProfiRip KR 310 M My. 2004 Multi-blade rip saw with 2 adjustable saw blades Track width 340 mm Total - passage width max 950 instead of 800 mm Cutting height with / without pressure board 115/130 mm Workpiece length 450 mm min Saw blade max. diameter 380 mm Saw blade min. diameter 250 mm Saw blade bore 80 mm Saw spindle diameter 65 mm Saw spindle speed 3900 rev / min Engine 30 kW Laser - directional lights 3 pc. Operating push 6 bar Infinitely variable feed - speed 8-48 m / min. 1.5 kW Weight 3400 kgs Voltage 400V/50Hz

Qty. 1 Second-hand hot circular saw Mfc.: TBA Built – Bj.: 1950 overhauled 1972 Saw blade dia. – Sägeblattdurchm.: 1,600 mm Saw blade feeding with hydraulic drive Sägeblattvorschub mit hydr. Antrieb Hydraulic station Hydraulikstation Dimensions of piece for cut: min./max. 70 / 185 mm square Abmessungen des zu schneidenden Materials: min./max. 70 / 185 mm

Engine power: 1,1 kW, 230V / 1PH motor coolant pump: 50 W Feeding: manual Blade speed: 20-65 m / min Number of steps: infinitely variable Band saw blade dimensions: 1,735 x 12.7 x 0.9 mm length Vice open/closed: 1,120 / 930 mm width without / with material stop: 510 / 720 mm Height lower / upper final position saw bracket: 1240 / 1,590 mm Net weight: 100 kg G & pieces 3300150SE Option: 3 Piece bi-metal band saw blades HSS

Glue binder cross saw Width 3200 mm (saw path) Saw blade diameter 900x50 Little worked !

Complete Log Cut-off Saw Manufactured by Raute

Scoring saw IMA - controllable

MEP Shark 282 CCS Band Saw 3-speed 400V, 2-stage motor, runs smoothly. Infinitely variable speed from 0 to 72 RPM. Miter cuts possible from -45 to +60 degrees. CCS (Cut Control System) hydraulic lowering aid. Saw blade pressure gauge. Year of manufacture: 2005 Made in Italy. Maximum cutting capacity round: 250 mm Maximum cutting capacity square: 220 mm Maximum clamping opening: 285 mm Saw blade dimensions: 2950 x 27 x 0.9 mm Coolant pump with filter in the base cabinet. Machine dimensions: 125 x 70 x 190 cm Infeed conveyor dimensions: 200 x 53 x 90 cm Includes accessories as shown in the pictures.

Manufacturer: Mohringer Type of Machine : Automatic Edging Saw Upgrades and Refurbishment - 1993 -- New Mohringer centring and infeed table installed - 2019 -- Full factory overhaul carried out at Mohringer works - 2022 -- New optimisation and control system installed (SDE) Find more here - / Contact us at -

min-max hoogte: 10 gt; 450 mm min-max breedte: 60 gt; 1050 mm cap: 400 kg/m maximaal positioneringsgewicht: 9 ton Vacon 110 CNC-besturing Voortman VB1250 lintzaag gt; cap: 500 x 1250 mm gt; versteksnede +/- 60°: 500 x 1000 mm gt; versteksnede +/- 45°: 500 x 850 mm gt; versteksnede -30°: 500 x 500 mm gt; zaagsnelheid: 40 gt; 120 m/min gt; vermogen: 7,5 kW gt; Afmetingen lintzaag: 11.000 x 54 x 1,6 mm Voortman 630 boorunit gt; boordiameter: 8/40 mm gt; draadtappen: M8/M24 gt; profielhoogtemeting inbegrepen gt; middelpuntmarkering inbegrepen gt; boorsnelheid: 0 gt; 2000 tpm gt; automatische gereedschapswisselaar: VTC 5/40 - 1x 5 posities gt; spindel: SK40 Hydraulisch aggregaat gt; 4kW - 160 bar

Key data: 2 kW, 5000 kg, 14 kW

Homag SawTeq B-300 flexTec with Yaskawa D200 robotter Brand: Homag Type: B-300 flexTec/Profi HPP300/43/43/F M-No.: 0-240-69-1263 Year of Make: 2020 Control: Cadmatic 5 Ardis Data Control Labeler: Pica II Robotter: Yaskawa DX200 Total connected load: 80A saw, shredder and 14.4A robotter 35A Crusher Cutting length 4,300 mm Cutting width/depth: 4,300 mm Main saw: 13.5 KW Saw blade protrusion mm: 80 mm Saw height: 72 mm Saw feed: 130 m/min Scoring saw motor: 2.2kW Angle Pressing Device: Sword Grooves: Nuttprogram Collets: 8 Program Trolley Feed: Step-Free Air cushion device 4 pcs, with between filling plates Table dimensions: 1 (1,760650) + 3 (2,170650) mm Additional features of the machine: Connection to storage system Yaskawa DX200 Robotter: Brand: Yaskawa DX200 Type: Eres-MPL0300-E00 M-No.: 201153 Year of Make: 2020 Robot system: YASKAWA ...

Manufacturer: Linsinger Type of Machine : CNC Saw Find more here - / Contact us at -

Late model Hobart commercial meat saw. Model 6801, serial number 31-1464-941, 200/230volts and 3 phases. Tested. Comes with one 142" blade. Unit has normal wear of used equipment, will require some extra cleaning.

This MACMAZZA Top Saw was manufactured in 2018. Ideal for precise panel cutting, this panel saw represents a reliable choice for your woodworking needs. Contact us for more information.

A complete industrial sawmill production line( Year of Manufacture : 2000) is available for sale , it includes the following elements: 1 - Log Yard Manufacturer: Hobest AG / EWD / Microtec / Herzog Forsttechnik Includes: • 3x Feed conveyor type NQF Hobest • 3x Step conveyor type HSF Hobest • 2x Block conveyor type BZ 500 Hobest • Chain swing saw with log holder type DSH/EWD-Stihl • Block conveyor with rotating device type BZ 500/S Hobest • Metal detector with conveyor type MSG/120 EWD • Tapered roller track type RGK Hobest • Root end reducer type Hobest Primus • Debarker type ER 90 EWD • Tipping trough type RKW/500 Hobest • Cross conveyor type NQF Hobest • Block conveyor type BZ 500-1E Hobest • Log measurement system type Kemes Keba • Sorting block train type BE 500/SA Hobest • Central hydraulic unit Hobest • Electrical control system  ...

Equipment Included - Wurster and Dietz OPTIMAT swing-stroke full gate saw, built circa 1970 - Splitting wedge - Cross conveyor - Roller conveyor - Sharpening machine - Setter - Wurster and Dietz Edge Saw FR 7, built circa 1965 Find more here - / Contact us at -

Excellent condition - Fully operational - Loading / Transport possible! supply: 400 Y/230 V, N, 3 phases, 50 Hz maximum operating full load current 44 A, fuse: 50 A control voltage: 24 V Dimensions: 6514 x 9963 x 4786 mm weigh:t 5500 kg

Manufacturer: Mohringer Year of Manufacture: 2006 Type of Machine : Block Band Saw Original Running Hours at First Installation: approximately 1 year Upgrades and Refurbishment 2019 -- Recommissioned - New chip conveyor (Spaner) - New infrared measuring system - New valves 2022 -- New cut visualisation system installed (Microtec) Find more here - / Contact us at -

DECKLAGEN PRODUCTION LINE TORWEGGE with WEINIG H22BL FINSIH LAYER PRODUCTION LINE ML-Presseen Torwegge Heating bed length 3 m Wood types FI, AI, LÄ, DG, ZI ML slat width 60 - 140 mm ML- Slat thickness 8 - 15 mm Rod width 25-45 Rod thickness 17-31 mm Possible. Carpet widths 1273 - 2073 mm Special widths 1000, 1700 mm Target capacity/layer 300 m2 LH 500 m2 19 - 31 mm Fi Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. = English = Technical data are partially estimated. Actual values may ... WEINIG High Performance Profile Machine, Type Hydromat 22 BL Built in 1995 with splitting unit (lamella saw) Bring (au ...

With the three-head roller saw, plastic-coated films can be sawn from wide roll to customer roll. With the system, film rolls can be sawn on 3" and 6" cardboard or plastic sleeves. The first cutting head is firmly positioned and defined as a master. The other two cutting heads are positioned to the master on the desired cutting width. A maximum of 2 benefits are possible. Sawing operations can be sawn dry, or wet by a wetting device of the saw blade. • Mesh type: Saw Material: Foil • Cutting system: circular saw s600 mm ( 3 saw cuts ) Saw cutting width: 6mm • Space usage: 7m x 4m Dimensions machine: 4.20m x 2m (height closed 2.15m, open 3,50m Sleeve width max.: 2700mm Cut width max.: 2620mm Cutting width min.: 500mm • Rolls max. : 550mm • Rolls min. : 200mm Sleeve diameter: 76mm/152mm

Saw for Pipe Cincinnati RS 25 PZ S 1992 year 4000 Euro

Dimensions (L/W/H): 1100x1500x2100 mm Weight: 800 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Centrifugal pump, water pump, stainless steel pump, food pump, peripheral wheel pump -Manufacturer: SAWA-Schmidhauser, centrifugal pump peripheral wheel pump -Type: F30/50 -Motor: Fig 1.50 kW / 2850 rpm -Dimensions: 480/210/H190 mm -Weight: 30 kg

Contactor, semiconductor contactor, contactor -Max. 30 kW 660 V -Price: per piece -Quantity: 17 pieces available -Weight: 2 kg

Contactor, semiconductor contactor, contactor -Max. 11 kW 660 V -Price: per piece -Quantity: 180 pieces available -Weight: 0.5 kg

For sale is a processing plant for third-party take-back polystyrene - fully functional. Feeding table: 2000x2000x900 Belt conveyor: 1420x4000 Slope: 21° Transport speed: 4-16 m/min Design: (50Hz):8m/min Styrofoam mill: 2180x2496x1590 Filling opening: 1500x1000, weight 1500kg

Dimensions (L/W/H): 1000x1500x1800 mm Weight: 570 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1300x1500x2100 mm Weight: 800 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1800x930x1500 mm Weight: 700 kg Total power requirement: 1,65 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This PEMA Column & Boom HD 4x4 Twin SAW was manufactured in 2019. It features a PEMA control panel with touch screen and WeldControl 100 for precise beam welding. The machine includes twin SAW heads, motorized traveling carriages, and a comprehensive wire feeding system. Ideal for longitudinal-shaped workpieces with a working range of 4m vertically and horizontally. Consider the opportunity to buy this PEMA Column & Boom HD 4x4 Twin SAW laser welding machine. Contact us for more information about this machine.

This RETHINK sawyer robot was manufactured in 2018. It features a maximum reach of 1260 mm and a gantry reach of 900 mm, with a typical tool speed of 1.5 m/s and a payload capacity of 4 kg. Ideal for a variety of automation tasks, the sawyer robot we have for sale offers advanced flexibility. Contact us for further details regarding this robot.

This RETHINK Robotics Sawyer was manufactured in 2018. It features a Schunk gripper arm with an adapter plate and was used only for testing. With a maximum reach of 1260 mm and a handling weight of up to 4 kg, it has accumulated only 131 machine hours and 18 runtime hours. Contact us for more information about this machine.

Feed motor: 5,5 kW total power requirement: 58,3 kw weight of the machine ca.: 4000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1400x1300x1800 mm Weight: 0 kg Total power requirement: 2,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A full USNR automatic saw mill, - Log yard with debarker and sorting, - canter chipping line, - 3x quadro bandsaw, - 2x automatic edger line, - Almab drop sorting line for main products, - USNR drop sorting line for side products

M.T.A. ARIES G 075 HE, Green R454B refrigerant, 227 kW effective output, Water IN/OUT 13°/7°C, Ambient temperature +35°C, 4 hermetic scroll compressors and 2 refrigeration circuits, Green R454B refrigerant, Global Warming Potential (GWP) = 467, which complies well in advance with the new F-Gas Regulation (EU) 2024/573, due to come into force on 1 January 2027 with a GWP ≤750, 4 condensers consisting of copper tubes and aluminium fins, NOT microchannels, Shell-and-tube evaporator, Evaporator anti-freeze heater, -20°C ambient temperature kit as option, Electrical panel heater, Brushless EC fans, availability: in stock, capacity: 227 kW cooling capacity, conditions: new machine, type: chilling unit

M.T.A.A ARIES TECH 2 105 HE, R410a New model year 2025:, 338 kW effective cooling capacity,, water inlet/outlet 20°/15°C, Ambient temperature +35°C, 4 hermetic scroll compressors and 2 refrigeration circuits, 4 condensers consisting of copper tubes and aluminium fins (NOT micro-channel), Shell-and-tube evaporator, Evaporator anti-freeze heater, -20°C ambient temperature kit option, Electrical panel heater, Brushless EC fans, availability: in stock, capacity: 338 kW cooling capacity, conditions: new machine, type: chilling unit

M.T.A.ARIES G 065 HE - new machine, Green R454b refrigerant, 150.000/200,000 BTU (174 / 232 kW), 198 kW effective output, Water IN/OUT 20°/15°C, Ambient temperature +35°C, Green R454B refrigerant, -- Global Warming Potential (GWP) = 467, which complies well in advance with the new F-Gas Regulation (EU) 2024/573, due to come into force on 1 January 2027 with a GWP ≤750 --, Shell-and-tube evaporator, 500-litre storage tank, P3 pump, Constructor Description:, The Aries G series liquid chillers are air-cooled units designed for outdoor use (electrical control panel protection rating IP54). All units are designed, manufactured and tested in accordance with ISO 9001 standards. The design of this range has focused on achieving full-load and seasonal efficiency ratings that meet the limits imposed by eco-compatible design regulations (ErP Tier 2 Compliant) for SEER and SEPR HT ratings, whil ...

Ariana Converger Stainless, 5 lanes into one, 5 x 60mm wide lanes into 120 x 60mm conveyor,adjustable side guides, easy adjust infeed height, product sensor.

CANON OCÉ ARIZONA 460XT large format printer built in Canada in 2013, is designed to provide the user with near photographic quality of prints with excellent text clarity. To make this possible, the CANON inkjet printer uses a piezoelectric method, during which special crystals change their shape and volume under tension and pressure on a membrane, and then splash under high pressure onto the printed surface. The use of this technology results in excellent image sharpness, density and uniformity, both while printing on a roll media and on a flat substrate. The OCÉ ARIZONA 460XT UV flatbed printer has an extra large work table with a vacuum system, with which oversized media with a maximum size (L x W) of 3060 x 2510 mm are held stationary to ensure accurate registration of multiple prints. Printing of large-format media uses a piezo head configured for CMYK + WHITE colour support, w ...

Siemens AXIOM Aristos FX Plus with the following device components: Generator Polydoros LX 30/50 Tube Opti 150/30/50 HC 0.6/1,0_Year of manufacture 2014 (ceiling-hanging) Vertical stand Aristos FX (ceiling-hanging) 1 Detector Trixell Pixium 4600 43x43 cm_Product No. 100204 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the b ...

CNC machining centers for drilling, staping, milling, wedge grooves. Working range: 4400 x 300 mm Max working width mm: 210 Max material thickness mm: 100

ARISA S-2-400-260-FD mechanical press was built in 2000 in Spain by Arisa S.A. (now Nidec Press & Automation Co. (NP&A)). The machine on offer is an excellent choice for series production of components used in the broadly defined automotive or machinery industry. It enables precise punching and stamping of metal parts. All these machining processes are performed with a high press force of up to 400 tonnes, which, combined with a highly dynamic slider, guarantees the best machining results. The ARISA S-2-400-260-FD features a robust, stress-relieved gantry design with an open side wall. This design maintains high rigidity, stable parameters and repeatability during even the most intensive operations with high press force. It is distinguished by the use of two connecting rods, a flywheel drive and an eccentric pinion gear. This solution ensures even torque transmission and smooth and pr ...