127,590 used machines on RESALE, but how to find them? Machine Search
Suitable for attachment to a carbide saw blade grinding machine of the type Vollmer CHD 250/CHD 251/CHD 270, CHF 270/CHF 350, loading system for saw blades with up to 630 mm diameter. Accessories: DES 300 data input station, 3 loading trolleys, Oil collection tray,, Automatic central lubrication,, Control cabinet cooler., Simplest stack circular saw blade outside diameter: 100 to 630 mm, double stack: 100 to 305 mm, maximum saw blade weight single-sided occupancy: 9 kg, double-sided occupancy: 6 kg, Bore diameter: 16 to 180 mm, sheet thickness: up to 5 mm, Stack height: < 300 mm, Connected load approx.: 1.8 kVA (400 V / 60 Hz), Weight approx: 1400 kg, colour: Gray RAL 7035
Feed rate: 50-1000 mm/min, operating voltage: 3x 400 V, control voltage: 24 V, rated current: 12 A. On-site viewing is possible.
This WINTER MBS 930 was manufactured in 2019. It features a motor power of 22.0 KW and a spindle diameter of 74 mm. The saw blade diameter is 205 mm, and it operates at a speed of 2600 rpm. Feed speed ranges from 0 to 12 m/min. Ideal for precise wood cutting. Contact us for more information.
Key data: 400 mm
Saw blade diameter: 400 mm Cutting area flat 90°: 200 x 120 mm Saw area flat 45°: 140 x 120 mm Saw area flat: 30°100 x 100 mm Cutting range round 90°: 140 mm Saw range round 45°: 140 mm Sawing range round 30°: 110 mm Replenishment length electronically adjustable: max. 800 mm Coolant pump / minimum quantity spraying device Hydraulic material clamping Hydraulic material feed Weight: approx. 1300 kg
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device • Pneumatic vertical clamping device • Integrated coolant spray system MPS control: • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling • Cutting pressure regulator The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This Emmegi Luna 450 TU/5 Circular Metal Saw was manufactured in 2008. It features a saw blade diameter of 450 mm and a spindle diameter of 32 mm. The saw blade motor operates at 2.2 kW with a speed of 2800 rpm. It supports cutting lengths from 310 mm to 5000 mm and has a weight of 1400 kg. Dimensions are 9400x1400x1838H. Contact us for more information about this machine.
Circular Metal Saw manufactured in 2019. This Other Struers Magnutom 5000 features a cutting capacity for round material up to à 151 mm and rectangular material of 151 à 403 mm. It has a continuous power of 11 kW and a maximum positioning speed of 70 mm/s. Consider the opportunity to buy this Other Struers Magnutom 5000 Circular Metal Saw. Contact us for further details.
Circular Metal Saw manufactured in 2007. This FomIndustrie Blitz Alva 450/500 ABC features a blade diameter of 450 mm, allowing for precise miter cuts. With a tool speed of 2800 RPM, it is designed for high-speed cutting across various materials. The robust construction ensures stability and longevity, making it ideal for heavy-duty industrial environments. Consider the opportunity to buy this FomIndustrie Blitz Alva 450/500 ABC Circular Metal Saw. Contact us for further details.
This Behringer VAL350NC Circular Metal Saw was manufactured in 2008. It features a cutting capacity for round materials of 115 mm and rectangular materials of 200 Ã 70 mm. The saw blade diameter is 350 mm, powered by a robust 6.5 / 8.0 kW drive. With a weight of approximately 2.3 tons, this machine is equipped with a BEHRINGER PLC control system and a micro spray lubrication system. Consider the opportunity to buy this Behringer VAL350NC Circular Metal Saw. Contact us for further details.
Circular Metal Saw manufactured in 2004. This KALTENBACH SKL450NA features a saw blade diameter of 450 mm and a cutting capacity of 150 mm for round materials. With a weight of approximately 1.5 tons, it includes a loading magazine for enhanced efficiency. If you are looking to get high-quality cutting capabilities, consider the KALTENBACH SKL450NA machine we have for sale. Contact us for further details.
Code: 0322 Brand: SCM Model: L'INVINCIBILE SI 3 - CE Standard Electronic panel saw with controlled axis, tilting blade and scoring unit, for furniture, panels, custom-made furnishings, doors, wooden window frames, kitchens, bathroom furniture, plastics, composite materials and various - CE Standard - Year 2017 Technical data: Carriage made entirely of aluminium with contact sliding system on hardened and ground steel guides Electronic control EASY TOUCH 12: 12-inch flat colour screen - Direct management of the following working axis using manual, manual incremental, semi-automatic and automatic methods: main blade lifting, blade unit tilting, parallel guide movement, scoring blade lifting and translation. Operator assistance with graphics support. Tool database Operator assistance function on electronic control Adjustable wall-mounted control panel Scoring unit with indepe ...
Jrion & Denz longitudinal saw Edging saw longitudinal circular saw Type HMS 15 Cutting length 3400 mm Cutting width 650 mm Cutting height maximum 120 mm Width stop can be adjusted motorically at the touch of a button Saw motor 11 kW Hydraulic pump feed 1.5 kW Saw blade feed speed infinitely variable 1 – 60 m/min. Saw blade return 60 m/min. At full capacity of the maximum cutting height of 120 mm, the maximum cutting length is 3200 mm. Saw blade diameter maximum 450 mm Cutting height for saw blade diameter 400 mm, 105 mm Saw blade bore 30 mm Extraction connection diameter 200 mm was mainly used to cut 80 mm thick planks Saw is activated via footswitch Rated current 23 A, frequency 50 Hz Instruction manual included Saw blades included 2 pieces diameter 400 mm, 4 pieces 450 mm Good, ready-to-use condition Machine Dimensions: 5750 mm x 1700 mm x H 1200 mm
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,27 t dimensions: 1,1 x 0,95 x 1,7 m - Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hood The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Suitable for the automatic grinding of HM circular saw blades on the face and top in one setting. All known tooth geometries (flat, alternate, trapezoidal teeth, etc.) can be ground automatically and in one pass., Accessories:, Total enclosure,, Coolant system,, Equipment for robot operation with automatic loading door, ND 230 loader, Measuring device for measuring saw blades, Chip breaker grinding attachment, Stepless variable grinding speed of the two grinding spindles from 1600 to 5500 rpm., Grinding speed and grinding path stepless adjustable for each machining surface on the tooth., Automatic central lubrication, Software package for oscillation grinding at rake and clearance angles, Automatic shut-off flap, Automatic fire extinguishing system, Electrostatic oil mist separator N281, Measuring tool, Sawblade holder with guide bushing Ø 16 mm Saw holder >ø180, Sawblade holder with g ...
Suitable for fully automatic grinding or new toothing and chamfering of HSS and segment circular saw blades as well as solid carbide circular saw blades, jig saw blades / thin-cut saws with chip breaker (diameter from 200-500 mm, tooth pitch from 8-30 mm), in plunge grinding using CBN or diamond grinding wheels. Accessories: Machine with total enclosure and integrated machine room lamp,, Loading system including 2 loading mandrels Ø 32 mm,, Oil conversion including aerosol extinguishing generator and oil conversion kit,, Control cabinet cooling unit,, Automatic central lubrication,, Marx VTG 0.32 electrostatic mist extractor,, HSS/HM fine filter system including external filter unit, with integrated 300-liter coolant tank and cooling unit,, Software for all standard curved and pointed teeth,, Signal light to indicate operating status,, Automatic switching of peripheral speed between CBN ...
Suitable for automatic grinding of the tooth geometry on chip and flank faces (front and back) of HM - tipped circular saw blades. All common tooth shapes can be finish-ground in one cycle (also trapezoidal flat tooth)., Accessories: Total enclosure,, Motorized chip and clearance angle adjustment, Manual central lubrication, Coolant grinding system,, 1 arbor,, 2 magnetic sawblade holders,, 4 centering sleeves,, 1 grinding wheel holder., Circular saw blade diameter: 80-810mm, Circular Saw Bore Diameter: from 10 mm, blade thickness: up to 5 mm, Tooth pitch: 7-100mm, rake angle: - 20° to +40°, clearance angle: 6° to 45°, tooth height difference: any, Bevel cut on the back of the tooth: up to 45 °, Working speed: up to 20 teeth / min., Bevel cut on the tooth face: up to 15°, grinding path max.: 20 mm, Grinding wheel bore diameter: 32 mm, Grinding wheel diameter: 125 mm, Connected load: ...
A precision circular saw Rohbi is available. Solid material cutting range: 50mm, tube and profile cutting range: 50-60mm, max. saw blade diameter: 225mm, bore: 20mm, speed: 1400rpm, max. feed length: 600mm, max. cutting length: 160mm. Machine dimensions X/Y/Z: approx. 1700mm/850mm/1600mm, weight: approx. 400kg. An on-site inspection is possible.
Technical data: Saw blade min. 200mm max 500mm Scoring unit Cutting height for 500 mm saw blade = 170mm Cutting width at rip fence 1050mm Edging carriage length 3800mm Motor 5.5 KW/400Volt Speeds: 2800/4000/5500 rpm Digital ads for: - Rip fence - Saw blade height/protrusion - Saw blade swivel Rip fence adjustable from the operator station via handwheel Hydraulic height and swivel adjustment via foot pedal Wide and narrow extraction hood Weight 1350
Roller conveyor size 2x L3000xW400mm Auction-ID: A1-44302-216
With automatic stop and measuring system AMS200. Auction-ID: A1-44302-8
With automatic stop and measuring system type MMS200, length 4750mm Auction-ID: A1-44302-54
Roller conveyor size L3000xW260mm Auction-ID: A1-44302-117
Grecon Dimter OptiCut 304R Optimizer Length of entrance timber min. 900 mm when loading on a cross chain conveyor Wood width min./max. 40-200mm Wood thickness min./max. 15-80mm Lowering, cutting and accelerating: 0.5 – 1 sec Cutting accuracy: min. 0.8 mm, max. 1.5 mm Wood cross-sections max. 200×25 mm, 170x50mm, 80x80mm, 140×60 mm Saw blade diameter 400 x 30 mm Saw blade speed 4200 rpm. Feed max. 170 m/min Material pick-up conveyor with 6 dodgehammers Cutting Modes: 1.Cut to fixed length 2. optimization of board length to maximize efficiency, 3. removal of wood defects with chalk marking of defects Length of the entire line 21m Year of manufacture 2000
With 2 roller conveyors Auction-ID: A1-44905-78
Miter saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 400 mm -Saw blade: swiveling -Drive: 2.5 kW -Speed: 2800 rpm -pneumatic material tension -pneumatic feed -with: chip extraction -Dimensions: 1100/900/H1160 mm -Weight: 238 kg
Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw -Manufacturer: Altendorf, sliding table saw type TKR 45 -Main motor: Bauknecht 5.5 kW with brake -Scorer motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm -Dimension total 3480/1530/H1370mm -Weight: 1104 kg
Aluminum crosscut saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw, metal crosscut saw, crosscut and miter saw, aluminum metal circular saw, light metal circular saw -Manufacturer: Berg & Schmidt, aluminum metal circular saw Velox 350 with solid base frame -Saw blade: Ø 350 mm / 1400/2800 rpm -Cutting height: 100 mm -Cutting width: 170 mm -Double miter: 45° -Drive: 1.3 / 1.7 kW -Double clamping device: pneumatic -Dimensions: 890/600/H1670 mm -Weight: 198 kg
cold circular saw, metal circular saw, miter saw, circular saw, sawing system -Manufacturer: Kaltenbach, cold circular saw, metal circular saw type RKT 631 HG with roller conveyor left / right -Stop length: 3900 mm -max. saw blade diameter: 710 mm -Drive power: 3.0 / 5.0 kW -Rotating base adjustment: continuously left/right -Cutting area at 90 degrees flat: 400 x 120 mm / round Ø 220 mm -Cutting area at 45 degrees flat: 250 x 80 mm / round Ø 180 mm -Cutting speed: blade diameter 710 mm 11 / 22 m/min. -Saw blade feed speed: continuously variable 0 - 1000 mm/min -Accessories: incl. 2nd saw blade -Roller conveyor left: total 3500/1060/H1100 mm / weight 378 kg -Roller conveyor right: total 3960/1370/H1390 mm with stop / weight 670 kg -Dimensions saw: 1670/1760/H2020 mm / Weight 2340 kg -Total weight: 3381 kg
scoring circular saw blade, scoring circular saw blades, HW scoring saw -Manufacturer: Schäffer, Vorritz circular saw blades HW-Vorritzer 2-part, adjustable -Type: 120 x 2.8-3.6 x22Z=2x12 -Number: 9x scoring saws available -Price: per piece -Dimensions box: 225/220/H10 mm -Weight: 0.3 kg/piece
Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, cold circular saw metal circular saw type TRL 300 pivoting on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 315 mm -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm -Accessories: incl.2 saw blades, see photos -Dimensions: 1230/630/H1800 mm -Weight: 273 kg
Heavy-duty universal carpentry circular saw, carpentry universal circular saw, miter saw, crosscut and miter saw, joinery circular saw -Manufacturer: Schneider Carpentry Machines, CNC joinery circular saw with roller conveyor, laterally movable left/right -Type: SLS 28 -Circuit saw: for crosscuts, miter cuts, bevel cuts, rip cuts, -Circuit saw: for cutting valley rafters, eaves boards, chamfers, and wedge boards -Saw unit: swivels 30°, rotates 180° -Drive motor: 11 kW -Saw blade: Ø 750 mm -Cutting height: max. 280 mm at 90° -Cutting height: max. 140 mm at 30° -Cutting width: max. 550 mm -Roller conveyors: 5020/750/H970 mm / 2000/750/H970 mm 320 kg -Saw dimensions: 2400/2130/H1600 mm 984 kg -Total weight: 1304 kg
Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, underfloor saw, aluminum circular saw, semi-automatic aluminum circular saw, chop saw, glass bead saw -Manufacturer: Kaltenbach, Cold circular saw, metal circular saw with roller conveyor left/right -Type: KKS 400 E Semi-automatic without material feed -Saw blade: Diameter 400 mm -Drive power: 1.8 / 2.7 kW -Cutting area at 90 degrees flat: 305 x 20 mm / round Ø 130 mm -Cutting area at 45 degrees flat: 245 x 30 mm / round Ø 130 mm -Cutting range for square bars: 90° 120 mm / 45° 110 mm -Miter: swivels on both sides -Cutting speed: 13/26 m/min. -Saw blade feed speed: infinitely variable 0 - 1000 mm/min -Roller conveyor left: total 4000/345/H1000 mm -Roller conveyor right: total 6000/345/H1000 mm -Saw dimensions: 1150/930/H1765 mm -Overall dimensions: 10810/1150/H1765 mm -Total weight: 1190 kg
SCM horizontal panel saw model Z45 with: - Useful cutting length 4500mm - Useful cutting depth 2100mm - Useful cutting height 90mm - motorized pusher with CM400 electronic programmer - Side guide with manual stops, for cross-cuts -1 fixed front plane L=2500mm -2 movable front floors L=1500mm Machine not CE compliant, for export AVAILABILITY FROM JUNE 2026
HOLTEC STIHL ES 121 SHKA Parcel Cross-Cut Saw 2001/2021 With approx. 15m roller conveyor, as good as new! The ES121 F/SHK is the simplest solution for precise end cuts – even from unedged and gap-stacked goods. Cutting with the positionable saw unit They rest parcels to the desired length. This system is also ideal for users with a small footprint. Guide rail swivels hydraulically at a 90° angle around a fixed pivot point Max. cutting accuracy and optimal cutting force distribution with hard chrome-plated pointed tooth chain or carbide-tipped pointed tooth chain from the Home STIHL available HOLTEC guide rail (stellitated on both sides – four-way reversible) ES 121 with roller conveyor and stationary sawing unit – the classic cut for dividing long packages into fixed lengths By means of a movable trolley, the packages are positioned exactly to t ...
Circular Saw Milling Machine KNAPP KFS Profi T -used-format sliding carriage, with boom table, circular saw swivel, angle mitre stop, milling machine swivel, milling spindle with right-counterclockwise rotation, finely adjustable milling stop---------- Technical data ----------Format sliding table Cutting length: 2,000 mm, cutting height: 103 mm, cutting width: 700 mm, max. saw blade Ã: 315 mm, swivel range circular saw: 45 Â, milling spindle diameter: 30 mm, swivel range milling machine: 45 Â, milling machine speeds: 2,850, 4,000, 7,800 rpm,
PUTSCH-MENICONI Format SVP 950 – Vertical Circular Saw for Particle Board General data: Manufacturer: Putsch-Meniconi Model: Format SVP 950 Machine type: Vertical panel saw (for particle board / PAL) Motor power: 7.5 HP Dimensions (L x W x H): approx. 7000 x 1500 x 2600 mm Technical details: Maximum cutting depth: 80 mm Maximum cutting length: 5300 mm Description: Vertical circular saw designed for cutting particle board (PAL) and similar panel materials. The machine allows precise and efficient cutting of large panels, making it suitable for woodworking workshops and industrial production environments. Auction-ID: A7-45351-47
CEG M. 100-2/FPC – Band Saw General data: Manufacturer: CEG S.r.l., San Mauro Pascoli, Italy Model: M. 100-2/FPC Machine type: Band saw Weight: approx. 500 kg Dimensions (L x W x H): approx. 1550 x 850 x 2100 mm Technical details: Motor type: Three-phase asynchronous (MOT. 3~) Power: 4 kW (approx. 5.5 HP) Rotation speed: 2913 rpm (2-pole motor) Voltage: 380 V (star connection) Current: 8.1 A Description: Industrial band saw manufactured by CEG, designed for high-speed cutting applications. The machine is suitable for processing metal or wood materials and offers reliable performance thanks to its robust construction and high-speed motor. Auction-ID: A7-45351-9
Equipped with Positron S frequency control Auction-ID: A1-41275-7
Key data: 90 °, 2000 mm, 1250 mm
Format saw Gazolin with scoring Trimming length 2000mm Motor 5.5 KW Very good condition
OMGA Radial RN 450 Radial Saw Cutting width 90° max 450mm Cutting height max 80mm Cutting deck adjustable in two planes Saw speed 3000r.p.m 2.21kw main motor Saw size 300mm Power supply 220V
Serial number: 225568451; PTO drive with PTO shaft; 3-point pick-up, hydraulic operation, adjustable cutting length 20/25/33/40/45/50/54 cm, attached discharge conveyor belt, approx. 4m, hydraulically foldable and driven Auction-ID: A7-45435-2
Machine: Motorized saw with turntable Engine: 12 kW direct, 3000 rpm Blade: Ø650 mm carbide Cutting heights: 90° = 245 mm / 45° = 164 mm / 30° = 113 mm Blade inclination: 90° to 30° (servo) Turntable: 0-270° motorized (servo) Equipment: laser indicator, aluminium stops 120x120 (3 m + 5 m), L/R roller conveyors (3-4 m), safety light curtain, PVC cover, 320 mm discharge tables, mesh panels, linear support 1660 mm Clamping: Pneumatic vices L/R, 2-hand bending device, table clamping cylinder with brake Length measurement: servo system with material valves, roller tracks 3-14 m Options included: Multi-length LiVoMat, GAMA 65V pneumatic side feed, additional conveyors, speed sensors Safety: full cover + multiple protections Auction-ID: A1-45443-17
KASTO PKS 140 — Datasheet Feature Value Blade diameter Ø425 mm (HSS) Cut (round) Ø10–140 mm Cut (square) 10×10 →125×125 mm Cutting (flat B×H) 140×125 mm Max Depth (HSS) ~300 mm Feed rate 16–600 mm/min (programmable) Inlet speed 5000 mm/min Blade motor HSS 10.0 kW / HM 29.0 kW HSS cutting speed 6–70 m/min · HM 80–150 m/min Max. tightening Princ. 2200 daN · Advance 1400 daN Hydraulics 3 kW Cooling pump. 25 l/min · 0.1 kW Bearing height 950 mm Precision power supply ±0.05 mm/300 mm Conveyor length: 5400 mm. Safety light bar included. Auction-ID: A1-44765-1238
An automatic single-head underfloor saw Emmegi including a chip extraction system is available. Cutting angle: 90°, feed travel: 0mm-1000mm, positioning accuracy: +/-0.5mm, saw blade diameter: 500mm, motor power: 6.6kW, weight: approx. 1000kg. An on-site inspection is possible.
Key data: 45 °, 3200 mm
Format Saw Robland Type: Z 3200 Year of construction: 90s Swivel format saw with scoring Diameter saw blade 400 x 30 mm Max. cutting height 125 mm Tilt adjustment 0 – 45° Max. cutting height at 45° 100 mm Saw blade speeds: 3000/4000/5000 rpm. Motor 5.5 kW Scoring diameter 100 x 20 mm Cutting height scoring 0 – 4.5 mm Inclined adjustment of scoring 0 – 45° Speed scoring 7000 rpm. Table size 1530 x 700 mm Table height 840 mm Dimensions of rolling table 400 x 3200 mm Cutting length 3200 mm Cutting width to the right of the saw blade 1380 mm Suction nozzle diameter 120 mm Net weight 1150 kg Packaging dimensions 2270 x 1330 x 1020 mm + 3250 x 450 x 200 mm
Mitre saw OMS INVINCIBLE OK 330 CE Maximum cutting length 3000mm Maximum cutting width 140mm Units adjustable at an angle of 45/-45° Motor power 2×1.8kw 330mm saws Pneumatic Vertical Material Clamping Net price
Mitre saw OMS INVINCIBLE OK 330 CE Maximum cutting length 3000mm Maximum cutting width 140mm Units adjustable at an angle of 45/-45° Motor power 2×1.8kw 330mm saws Pneumatic Vertical Material Clamping Net price
maximum number of results exceeded
please refine your search
10 € 
