arau used for sale

SPG. Regulator -Motor controller: 1-6 A -Dimensions: 190/140/H65 mm -Weight: 0.5 kg

Hydraulic fluid Type HLP46 Manufacturer Aral Original sealed 200 litre barrel Special price

Inv. number: 108180 Type: SNB 500 x 1500 Parameters: Manufacturer: ARAD Year of manufacture/SO/GO: -/-/- Location: Slovakia Description: Machine in good technical condition. Currently unplugged, ready to go. Machine length 3500mm, weight approx. 3t.

Heavy duty lathe, lathe, lathe, center lathe and lathe, center lathe -Remark: the lead screw is missing (for thread cutting) -Manufacturer: Arad Elite, type ES 710 -Distribution: Andras Plum -Turning length: 2120 mm -Swivel Ø over bed: 780 mm -Rotating Ø without bed: 1000 mm -Rotating Ø over support: 400 mm -Spindle bore: Ø 83 mm -Spindle speeds: 8 - 1250 rpm -Three-jaw chuck: Ø 400 mm -Quick change: Multifix steel holder -Tailstock mount: MK5 -Drive motor: 18.5 kW -Dimensions: 4000/1450/H1430 mm -Weight: 4900kg

Key data: 1000 mm, 2000 mm, 800 mm

Heavy Lathe, Lathe, Lathe, Lead and Pull Screw Lathe, Lead and Pull Spindle Lathe -Manufacturer: Arad M.I.C.M., Type SN800x2000 -Turning length: 2000 mm -Swivel Ø over bed: 800 mm -Swivel Ø without bed: 1000 mm -Swivel Ø over support: 400 mm -Spindle bore: Ø 83 mm -Spindle speeds: 8 - 1250 rpm -Three-jaw chuck: Ø 400 mm -Quick change: Multifix steel bracket -Tailstock mount: MK5 -Drive motor: 18.5 kW -Dimensions: 4000/1450/H1430 mm -Weight: 4500 kg The machine can be viewed at any time. Free loading. Transport possible throughout Europe

Snb 400x1500p

Turkish made 3000 mm x 10 mm plate rolling machine 3 rolls Maximum bending thickness : 10 mm

Collector coins Arabic 9 pcs. among others Maldives 1/4 Larin 1300, 250 Fils Bahrain, 1983, 4x 1/2 Dinar Tunisia 1968-1990, Morocco 5 Dirham 1975, Algeria 1 Dinar 1972, Egypt 5 Milliemes 1941, Coin Holder

Locking system, MGB-L2-ARA-AM5A1-S1-R-121190 + MGB…., Euchner, mint condition Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Scope of delivery: - 1 piece guard locking and monitoring, MGB-L2-ARA-AM5A1-S1-R-121190, Euchner - 1 piece handle module, MGB-H-AA1A1-R-100464, Euchner - 1 piece connection cable 18-pole incl. plug 8.4m long, Euchner Top condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 250 hours of operation. 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequen ...

Chiller chiller Uniflair Type: ARAF1204A Cooling capacity: 276 kW 4 x compressor performer scroll type: SZ 300 Shell-and-tube heat exchange Refrigerant: Freon R407 2 circles Freecooling Dimensions : 5242 mm x 1344mm x 2140mm In very good condition Number in stock: 1 piece, Price on request, We have other used refrigeretion equipment like: BITZER, Copeland, Frascold, Lunite, Kueba, Guentner, eco, Alfa-Laval, Goedhart, Helpman

Cooling capacit: 276 kW (10/15 - 35°C) Year of manufacture: 2013 Options: Hydromodul, Free cooling Hydraulic module: 2 pcs. pump, 500 liters expansion tank. Refrigerant circuit: 2 pcs. Number of fans: 4 pcs. Type of refrigerant: R407С Compressors: 4 pcs. Danfoss (scroll) Heat exchanger: Shell-and-tube Dimensions: 3,6 x 2,26 x 2,3 m. Weight: 3 147 kg. Working hours: 28300 h. Condition: Excellent Product quantity: 1 pcs.

Capacity: 200 t Folding length: 4100 mm (1) Down stroke / (2) Up stroke: 1   CNC Brand: Safan CNC Model: ARA Touchscreen MACH-id    6042 MAKE        Safan Darley Holland TYPE          E-BRAKE 200 - 4100 YOP            2010 SPECIFICATIONS Max. bending length    4100 mm Distance between column        4100 mm Max. pressing force          200 T Dis. Beam - Table         690 mm Beam stroke                  300 mm Approch speed         200 mm/min. Working speed         10 mm/min. Return feed               100 mm/min. Adjustment X-Axis back gauge        ...

Capacity: 110 t Folding length: 4300 mm CNC Brand: _Unknown / Other CNC Model: Touchscreen ARA MACH-id    4418 MAKE        SAFAN Holland TYPE           PLCS 110 - 4300 TS3 YEAR           1998 SPECIFICATIONS Controll         Touchscreen  ARA Pressbrake / Folding / Mech. / Hydr.       Pressbrake Hydraulic / Mechanical            Hydraulic Bending length       4300 mm Distance between column           3600 mm Press force        110 Ton Throat         400 mm Stroke         180 mm Die height      480 mm Backgauge stroke X in mm       1000 mm  ...

Capacity: 25 t Folding length: 1250 mm CNC Brand: _Unknown / Other CNC Model: ARA Touchscreen TS1 MACH-id   4147 MAKE       Safan Darley TYPE         SMK 15 - 1250 TS1 YEAR   1999 SPECIFICATIONS Controll        ARA Touchscreen TS1 Pressbrake / Folding / Mech. / Hydr.        Pressbrake      Hydraulic / Mechanical      Mechanical Bending length     1250 mm Distance between column        1250 mm Press force           25 Ton Stroke        115 mm Backgauge stroke X in mm         600 mm Number off controlled axis     3 Power     6 kW DIMENSIONS Length      1600 mm Width&nbs ...

Capacity: 110 t Folding length: 3100 mm CNC Brand: _Unknown / Other CNC Model: ARA MACH-id   4026 MAKE       Safan Darley Holland TYPE         CNCS 110 - 3100 YEAR        1989 SPECIFICATIONS Controll    ARA Backgauge Pressbrake / Folding / Mech. / Hydr.   Pressbrake Hydraulic / Mechanical      Hydraulic Bending length     3100 mm Distance between column    2550 mm Press force       110 Ton    Stroke           300 mm Backgauge stroke       X in mm     0 - 1000 mm Number off controlled axis     4

We offer 126 pieces of Dokamatic ceiling tables 2.50x4.00m with 85% discount on the new value of 2.986,00EUR Retail price 447,00EUR/ piece. The Dokamatic slab tables are controlled and sorted and ready for immediate use. all prices excl. VAT + transport Subject to clearance. If you have any questions, please contact Mr. Becker on 0176 70044689 Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Master Craftsman Company Andreas Becker e. Kfm. Tel. 07 arata numarul/9562350, Fax. 07 arata numarul/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registry Court: HRA722943 VAT NUMBER: DE279047055 Qu

Bread packaging machine Bag packaging machine Hartmann VS 320 Bag packaging machine Hartmann Automat VS 320 is for sale and immediately Available in our warehouse in Bielefeld.The machine packs breads into bags and closes them with clip tape.The machine is also suitable for Arabic bread pita and the like. Bread packaging machine Hartmann Automat VS 320 Year of construction : 1998 Voltage: 3x400V/N/PE 50Hz Power Input 4 kW Weight 1600 kg Pita Bread Arabic Bread Pack

Plate filter Schenk Type Niro 1000 in V2A Capacity: 10.000 Liter/h for beer Capacity: 10.000 Liter /h Factory No. 154 Type Niro 1000 Year of construction 1996 Oper. Pressure: 8 bar Oper. Temperature: 115 °C Operating instructions available! with 70 Stainless steel plates hydraulic contact pressure with spar support with sight glass fittings with pressure fittings with manometer with Input / output valves with vent valve with Flow meter v. Sigrist Electrical Protection: IP 54 Voltage: 230/400 V – 50Hz Power: 1,5 kW Filter connections: Filtrate – inlet: threaded connector DN 80/100 DIN 11851, material 1.4301 Filtrate-outlet: threaded connector DN 80/100 DIN 11851, material 1.4301 Emptying: DN 40 DIN 11851 thread material 4.4301 Vent: angle valve R1/4‘‘-DN8; material 1.4571 / PTFE Filter pl ...

Pneumatic valve DN 300 Manufacturer: Jaudt Dosiertechnik Maschinenfabrik GmbH Type: Varioschieber FSV Opening width mm: ø 350 Height mm: 130 Max.Working temp. ° C: 80 Operating pressure MPa: 0.6-1.0 maximum operating pressure MPa: 0 Control voltage V: -. Housing: one-piece cast housing in flange version the round face with coarse good Chicane Sealing: slide sheet implementation for with Adjustable stuffing seal Pressure piece from cast aluminium alloy Blade: Stainless steel 1.4301 Slide sheet: eccentric screws galvanized Finish: Stainless steel and aluminum parts blank Grey cast iron housing painted in RAL 9006 Steel parts zinc plated, 10 & #956; m Plate made of aluminium Housing material: Cast aluminium alloy (AlSi 10 mg) shock-proof up to 5 bar Flanschbohrbild: According to DIN 2501 PN 6 Packing material: ARAMIDE (Tmax 280 ° C) Operation: pneu ...

used bread packaging machine Hartmann Automat VS 320 is for sale and immediately available in our warehouse in Bielefeld. The machine packs breads into bags and closes them with clip tape. The machine is also suitable for Arabic bread. Bread packaging machine Hartmann Automat VS 320 Year of construction : 09 / 2012 Voltage: 3x400V/N/PE 50Hz Power Input 4 kW Weight 1600 kg

Plasma cutting machine make THERMAL-ARC type PAK 5 XRFabr. -No: 183247 / EO2016APower: 26/18 ARated power: 55A at 100VWith- Burner- hose packageusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

High-resolution inkjet printer with many possibilities. For coding and marking absorbent materials such as folding cartons, trays, bags, sacks or individual products up to 8 lines plus graphics and barcodes. Character height from 1.5 to 18 mm Product benefits at a glance High-resolution inkjet printing: 128 individually addressable dots per printhead. Completely free print image design within the text area. Combination of text, logos and barcodes in one printed image. Kortho Image Generating Software for logical image creation on the pc. Unique infrared remote control: no wired connection required. Separate, refillable ink tank with industrial-grade volume. Clean, easy filling with ink during operation. Very low cost per print. Printing costs can be calculated by program. Maintenance reduced to a minimum. No need to rinse with solvent. The advanta ...

Used net belt oven for pita bread JAGUM - especially for pita bread and other Arabic breads - MITSUBISHI S500 controller -Steel - Condition: Good, ready for immediate use Specifications: - Connection: 10 kW, 380 V, 50 Hz - Dimensions: L 1.200 x W 800 x H 700 mm - Weight: 150 kg Visits and test runs are possible by arrangement.

Electronic Module, Servo Backplane ABB DSQC 255 ( DSQC255 ) 3HAA3563-ARA used, tested ! Dimensions: 425 x 130 x 20 mm

Description 4 HOT ROOM ZONES AVAILABLE LANGUAGES: ITALIAN ENGLISH GERMAN FRENCH SPANISH ARABIC

SAFAN Lochem Holland rb.1996 type CNCL 80-2550 hydraulic press brake. CNC-controlled synchronous machine DNCS ARA-controlled axes-Y1; Y2; X; Crow - Wila Moducrown table deflection compensation controlled from CNC. In addition, a hydraulic die for felting-flattening sheet metal type DT005, controlled from CNC. Pressure 80 t x working length 2550 mm. Between the sides 2050 mm. Weight of the machine 6 t. Drives 11 kW. A set of tools of Amada/Trumpf system for the entire length of the machine, die V=12 mm /angle 28 degrees and punch 28 degrees/h=105 mm. This makes it possible to bend and flatten a sill 6 mm wide. Full DTR documentation. Health and safety manual in Polish. The machine meets the requirements of the EU Machinery Directive(CE).

In very good technical condition, the SAFAN Lochem Holland hydraulic press brake rb. 1990/2012, type DNCS 110-3100. Press rebuilt by the manufacturer in 2012. CNC-controlled synchronous machine DNCS ARA- controlled axes- Y1; Y2; R; Crow - Wila table deflection compensation controlled by CNC. In addition, a hydraulic matrix for sheet metal folding-flattening, type DT005, controlled by CNC. The machine is equipped with an automatic sheet support system during bending and flattening at 2 heights. Hydraulic punch clamping. 4 bumper fingers with precision. Pressure 110 t x working length 3100. Between the sides 2600 mm. Machine weight 8.3 t. Drives 7.5 kW. Protection of the working area with infrared. A set of Amada / Trumpf system tools for the entire length of the machine, die V = 8 mm / angle 28 degrees and punch 28 degrees / h = 105 mm. This enables the 6 mm long window sill to b ...

Pressure casting machine Netzsch Year model 1989. Refurbished: new lines, membrane and mass compression hydraulic piston seals. Had 12 years with very little use. The machine is a former Fiskars Oyj, E4361575 Arabia Finland. The machine is in full working order.

Spiral mixer extendable Kemper ST 75 AHeducator : KemperType : ST 75 A75 kg flour 120 kg dough2 watchesstainless steel kettle and spiralwith 1 extendable boilerAttention 3x110 Volt ideal for countries with 110Volt example USA / Arab countriesDetails see picture