annex used for sale

SK40 DIN 69871 Oil Feeder met Holder Weldon 40mm A= 65mm For internal cooling for rails without internal cooling through the spindle

SK40 DIN 69871 Oil Feeder Weldon 32mm

Resistance annealing machine This machine anneals (thermally straightens) stainless steel wires from 0.30 - 0.50mm). FUNCTIONAL DESCRIPTION: - The machine enables heating by direct passage of electric current through the wire through the wire (resistance annealing process). The device is equipped with 4 special power stabilisers for regulation, in combination with an optical pyrometer for temperature control and thermoregulation. - The simultaneous heating of the 4 wires takes place in a chamber saturated with inert gas by the electrical contact transmitted by two conductive V-shaped discs (short-circuit rollers). are transmitted. Two further V-shaped discs have the task of guiding the wires. - The system can be integrated into an existing automatic Scholl disc system, which, however, is not not included in the scope of delivery of the machine. Alternatively, the straightened  ...

Sourdough Mixing Kettle Anneliese Biomat -Sourdough machine -Anneliese -Biomat -mobile on castors -Stainless steel

Qty. 8 Second-hand bell annealing furnaces Mfc.: FERRE’ Built: 1980 Modernisation in 2000 Protective atmosphere: N2 No. of furnaces: 8 No. of base: 24 Base relationship: 1 : 3 Annealing temp.: 670-710 °C Coil dia.: 1900 mm Max. stack height: 3600 mm Electric Drawing Mechanical Drawing Combustion Drawing Certification: Allegato V/81 User manual

Qty. 1 Second-hand batch-type annealing furnace Mfc.: LOI SAAR Type: natural gas (Hu=3.6 MJ/Nm³) Charging material: square, round dia. 50 up to 200 mm Length: 6.2 m Max. heat treatment temperature: 950 °C Capacity: max. 60 T at normalising 35 T Application: Tempering, stress relieve, normalising Heat gradients: 60 °C/h average (adjustable) Heating zones: 4 Number of burners: 20 Control principle: on/off with digital programmer Temperature precision: 10°C tolerance at 550 °C

Annular seal in link chain design, pipe sealing cushion -Various: Diameter -Can be used as a wall penetration, tank embedding and casing pipe sealing -Transport dimensions: 600/500/H350 mm -Weight: 35 kg

Manufacturer: Fata Production Machinery (1995) Main Equipment: 2 pay off reels Entry Lap Welder (Taylor Winfield) Vertical Accumulator High Pressure Spray Cleaning Section Electrolyte Cleaning Section Brushing Cleaning Section Rinse Section Vertical Annealing Furnace (Selas) Flying Exit Shear 2 Tension Reels Line Capacity: 60.000 MT/year Maximum Process Section Speed: 113m/min Maximum Entry Section Speed: 136 m/min Maximum Strip Thickness: 0.28 mm Minimum Strip Thickness: 0.17 mm Maximum Strip Width: 1000 mm Minimum Strop Width: 700 mm Maximum Coil Weight: 18 MT Crew: 4 Operators

Fully refurbished intensive annular tray mixer with 1,500 l. net batch capacity and 1,000 l. hardened concrete output. The mixer is equipped with 2 agitators which are driven by the main drive, and with 1 discharge gate.

A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible.

Various spare parts for annealing furnaces

MAX. TEMP.: 1000 °C, CAPACITY: 60 TON, NO. OF BURNERS: 20,

1. 1971, BELL TYPE, TEMP.: 500 °C, COIL DIM.: OD 1400 MM x 1600 MM 2. VEB, 1971, INNER CHAMBER DIM.: 2.5 x 1.3 x 1.5 M, TEMP.: 500 °C

1.05 m width, with Weidemann mount

General SKU397X1140 MakeGab Neumann LocationBarneveld CEcheck Type22 l. Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Verticalcheck Tube capacity22 l. Max. temperature-30°C/+180°C Shell capacity13 l. Shell diameter400 mm Shell length1090 mm Max. temperature-30°C/+180°C Shell connectionsDia. 125 mm Cover connectionsDia. 25 and 50 mm Information No.28123-21620 Year of construction2010 Weight355 kgShell and tube heat exchangersNew arrivalsGab NeumannHeat exchangers > Shell and tube heat exchangersNew arrivalsBrand > Gab Neumann What you can expect from Foeth: -- Machine is in working c ...

Austempering Automated Press Quenching Black Oxide Bluing Bright Annealing Calcining Carbon Baking Carbon Restoration Carbonizing De-Waxing DrawingTempering ForgingReheating Gas Carburizing Gas Nitriding Heat Flattening AMS-2750E standard Heat Treatment of A356 Aluminum Castings to T5 and T6 Hardness AMS-2750E standard High Temperature Tempering Homogenizing Incineration Ion (Plasma) Nitriding Ion Carburizing Low Pressure Carburizing Malleablizing Marquenching Oxy-Nitriding Post Oxidation Pre-Heating Pre-Oxidation Press Quenching Purging Pyrolysis Resource Recovery Pyrometallurgy Quenching Reheating Reheating for Press Quench Scale Free Heating Soldering AMS-2750E standard Solution Treatments T6 Heat Treatment Thermal Destruction Torrefaction Triniding™ Vacuum Heat Treating Washing STRESS RELIEVING AGING NORMALIZING HOMOGENIZING ANNEALING ANNEALING TEMPERING HEATING HARDENING ...

Component Manufacturer / Model Year Capacity / Notes Condition Depalletiser "KETTNER PRESS UNI ABSCH Komm.Nr. 96/0143/037" — Can depalletising — start of line Good — annual overhaul Rinser (water / ClO₂) MEYER Typ: Hyet 2020 25,000 c/h Good — annual overhaul Filler — Isobaric CO₂ "KHS Inofill CAN DVD 50 (0.5L, 0.33L, Pint)" 2020 "25,000 c/h CO₂ atmosphere, foaming device, buffer tank" Very Good — 2020, annual overhaul Seamer FERRUM F 08 2020 25,000 c/h Very Good — 2020, annual overhaul Full Can Inspector "HEUFT SPECTRUM VX TI 36 Level control" 2020 "25,000 c/h Full level + quality inspection" Very Good — 2020, annual overhaul Tunnel Pasteuriser "NIKO Typ: 095.31.152.100.1 Nr. 41540/96" — Post-fill pasteurisation Good — annual overhaul Can Packer Included in line 2021 Multi-pack formation Good — annual overhaul Palletiser Included in line 2021 End ...

CHARACTERISTICS HEAT TREATMENT EQUIPMENT   temperature max.: 950 °C Clear width 2,200 mm Usable width 2,070 mm Usable height 400 mm Working height 1,300 mmInlet roller conveyor 14,700 mm Inlet box 2,500 mm Annealing furnace 29,169 mm (Annealing furnace clear length) approx. 26,769 mm Cooling section (HT and NT) 51,000 mm Outlet box 2,500 mm Outfeed roller conveyor 14,660 mm Total length 114,530 mm (annealing furnace and cooling section)N2 purge gas volume 420 m3Furnace design: Roller hearth continuous furnaceMaterial: TubesOuter diameter: 14 - 180 mmWall thickness: 0.8 – 8.0 mmLength: 4.0 – 13.0 mSurface before annealing: --Throughput at 920 °C annealing material temperatureThroughput at 700 °C annealing material temperatureReference pipes: 25 x 2.5 x 8000 mm33 x 3.5 x 8000 mm40 x 3.5 x 8000 mm55 x 2.8 x 8000 mm63 x 4 x 8000 mm75 x 6 x 8000 mm110 x 8 ...

Heat Treatment of A356 Aluminum Castings to T5 and T6 Hardness AMS 2750E standard Ovens Chamber Furnaces Laboratory Furnaces Industrial Furnaces Ashing Furnaces Annealing Furnaces Tube Furnaces Vacuum Furnaces Furnace heat treatment normalizing, preheating, austenitizing, pearliting, ferriting or softening. From electrically or gas heated melting furnaces, dewaxing furnaces or core drying furnaces to fully automatic annealing plants for aluminum or steal, covers professionally all applications for the foundry industry. Melting and Holding Furnaces melting furnaces Cleaning Furnace for Riser Tubes, Electrically Heated Forced Convection Furnaces Drop-Bottom Furnaces Electrically Heated or Gas Fired Quench and Tempering Plants for Steel Quench Tanks Chamber and Bogie Hearth Furnaces Catalytic and Thermal Post Combustion Systems Continuous Operation Furnaces Temperature Uniformity and Sy ...

Maximum removal of impurities. Increased quality of the final product. Extended service life of the operating process. High reliability. Low pressure loss. Service-friendly. Tested according to applicable ISO standards. Filter package Replace filter G85 1/2" residual oil 0.3 mg/m³ after 2000 hours Replace filter C85 1/2" residual oil 0.01 mg/m³ after 2000 hours Replace filter V85 1/2" residual oil 0.003 mg/m³ after 1000 hours Residual oil after filter package 0.003 mg/m³ = technically oil-free + Wall bracket + Connection kit Filter G Equipment in detail Drain: Automatic float drain valve Performance data Nominal capacity 1.42 m³/min Application: Oil Aerosol Oil aerosol concentration in the outlet 0.3 mg/m³ Total mass efficiency >99.25 % Quality class of air at the outlet (oil) 3 according to ISO 8573-1:2010 Pressure loss dry 55 mbar Pressure loss wet 125 m ...

Fully automatic system for filling nested disposable syringes and closing with plunger stoppers, consisting of 4 Bausch+Ströbel components: • TUM 9070 Tub unpacking machine for removing the cups from the bag using a sliding device • DVE 9070 Cover and protective film removal • SFM 5072 Filling and sealing machine • NTS 8140 Transport system • Output max. 36,000 disposable syringes/h, infinitely adjustable • For disposable syringes 0.5 - 10 ml depending on format set • For plunger stoppers diam. 5.00 - 21.00 mm, H 7.00 - 15.00 mm depending on format set • For 100 mm nest • For tub H max. 130 mm • Parts in contact with the product made of stainless steel AISI 316L • IQ/OQ qualification documentation in accordance with Annex D5 GAMP 5 and Annex 15 EU-GMP in English • Calibration (KAL) for all process-relevant measuring systems • Material specification • PLC Siem ...

3D Systems ProX SLS 500 – Industrial SLS Printer | Year of manufacture 2014, Used SLS system for industrial polyamide production – full service history available, The 3D Systems ProX SLS 500 belongs to the most powerful industrial SLS systems in its class. With a large build volume and high laser power, it is designed for demanding serial and prototype production from PA12 and related powder materials. The machine has been professionally operated and is documented by the manufacturer 3D Systems with a complete, uninterrupted service history., Technical specifications, Manufacturer: 3D Systems, Model: ProX SLS 500, Year of construction: 2014, Serial number: 20012201106, Technology: SLS (Selective Laser Sintering), Software version: V 6.1.9, Max. laser power (per PM 11/2024): 101.4 W (with laser window) / 109.5 W (without), Max. laser power (as per PM 09/2025): 108.1 W (with lase ...

Used Pieralisi malazers with control panel and P60 pumpsTechnical Specifications & Performance DataThese Pieralisi olive oil malaxers are second hand processing units designed for the malaxation stage in industrial olive oil extraction lines. As a key step between crushing and centrifugal separation, the malaxers homogenize and condition the olive paste to optimize oil yield and quality. The units are currently installed and have been maintained with regular annual service and cleaning. Suitable for integration into a used bottling line or broader industrial packaging and processing environment, they provide reliable throughput for producers seeking dependable performance in food and beverage production facilities.Manufacturer: PieralisiYear of manufacture: 2000Process role: Malaxation/kneading of olive paste prior to decanter centrifugeIndicative capacity: approximately 20 quintals/hour ...

1987, CAP.: 75,000 T/ANNUM, STRIP WIDTH: 250 - 1300 MM, THICKNESS: 0.2 - 2.0 MM, COIL WEIGHT: 10 T, SHEET LENGTH: MAX. 4.0 M, 2-ND LINE: CAP.: 30,000 T/ANNUM, STRIP WIDTH: 700-1300 MM, THICKNESS: 0.3-3.0 MM; COIL WEIGHT: 10 T, SHEET LENGTH: 4.0 M, SPEED: 20 M/MIN.,

STILMAS pure steam generator - type PSG 3OO DTS - produce saturated dry pyrogen-free pure Steam by using industrial steam as heating fluid. Pure steam DN 50 PN 16 Sampling discharge: ½” Triclamp Industrial steam DN 40 PN 16 Condensate discharge: DN 25 PN 16 Cooling water outlet: ½” Triclamp Safety valve: DN 40 PN 16 Cooling water inlet: ½” gas M. Electric line 380 V/50 Hz Compressed air 6 bar Main components: A) E 020 DOUBLE TUBE SHEET EXCHANGER - Construction in AISI 316 - ISPESL tested - Design pressure: shell side 10 bar – tube side 6 bar B) ER 020 EVAPORATION CHAMBER AISI 316 L construction ISPESL tested - Design pressure: 6 bar C) SUPPORT FRAME Painted carbon steel construction D) FEEDWATER PUMP P 020 AISI 316 stainless steel construction Type GRUNDFOS CRN 2 – 70 ( See Annex n° 24) E) SAFETY VALVE PSV 020 - SN - AISI 316 STAINLESS STEEL CO ...

For sale is a complete frame sawmill as listed below. (Single sale also possible, please register in advance) An annual cut of up to 60,000 solid cubic metres of round timber is possible with the system. With a log length of 4 metres, the current annual cut is approx. 30,000 solid cubic metres in 1-shift operation. The facility is still in operation and can be visited by appointment. Machine Listing: 01. Log feed 4-strand SPRINGER with separator with roller conveyor with log turner with insert 02. Clamping carriage remotely controlled ESTERER Type: FHZ SV Built in 1990 Track width: 110 cm with auxiliary wagon with cabin 03. Frame saw ESTERER Type: HDS Built in 1973 600 stroke max. passage 71 cm with splitting wedge with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up 04. Frame roller conveyor Mayrhofer w ...

Qty. 1 Second-hand cold rolling mill Mfc.: MCC, ABB, IMS Type: 6-Hi Cold Rolling Mill Built: 2009 Stopped: 2017 Annual capacity: 220,000 Ton/Year Annual running time (Hour): 6480 Strip Width: 800~1250 mm Thickness Entry: 1.5~3.5 mm Exit: 0.2 – 1.2 mm De-Coiler OD: 1000~2000 mm De-Coil ID: 610 mm De-Coil Weight: Max. 25 T Coil OD: 1000~2000 mm Coil ID: 610 mm Coil Weight: Max. 25 T Mill Max Speed: 1300 m/min Threading Speed: 30 m/min Main Drive Controller (3300 VAC) Mfc.: ABB ACS6000 Variable Speed Variable Voltage Xray Gauge Mfc.: IMS Germany Automation Siemens PLC/Wincc

Mesh belt continuous furnace CIEFFE type: FNC procedure: tempering, carbonitriding, case hardening lenght: appr. 52 m belt (H x w x d): 25 X 930 X 9300 mm production output: 80-1000Kg/ h connected load: 170kW (HTO) + 35kW (wash) + 135kW (tempering) Heating capacity of natural gas: 768kW (annealing furnace) + 643kW (tempering furnace) annealing furnace: Belt speed: 20 -172 mm/min max. temperature: 910°C temperature uniformity: ± 7°C (area 1-3), ± 5°C (area 4-6) washing machine: wide conveyor belt: 1000 mm washing sink: 1800 lt rising tank: 1200 lt quantity per hourly production: 700dm3/h tempering furnace: belt speed: 60 - 234 mm/min max. temperature: 650°C temperature uniformity: ± 5°C (150-600°C)

Qty. 1 Second-hand Copper Strip Production Plant – Still in Production Mfc.: J. F. Norton, Shinkwang Tech, Partec, Rozai, Chungwon Control & Sunil, Handuck R-FECO, Mirae Tech Inc., Changjo, Wuishi, Youngchang Machinery, Dongshin Tech., Sonoda Engineering Co., Wuxi Longar Mach., Backsan Machinery, Youngdong Coil Center, Deakwang Machinery, Hanguk E.N.G, Built: 1962, 1965, 1990. 2000, 2001, 2008, 2017, 2018, 2019, 2020 Revamping: 2017, 2019, 2020, Scope of supply: Roughing Mill Mfc.: Famer Norton Type: 4-Hi Irreversible – WR Drive 318 x 610 x 635 mm Built: 1965. 06 Revamping: 2017. 09 by Shinkwang Tech Strip width: 200 – 530 mm Thickness: 3.0 – 12 mm Intermidiate Mill Mfc.: Shinkwang Tech Type: 4-Hi Irreversible, WR Drive - 225 x 570 x 720 mm Built: 2017. 06 Revamping: 2020 by Partec Strip Width: 200 – 650 mm Thickness: 0.8 – 5.0 mm Finishing Mill ...

2016 ONLINK Technologies SIGMET-2000V High vacuum coating machine The system coats even the most complex 3D molded parts made of metal, glass or plastic with aluminum and achieves exact, precise quality and flexibility. Total machine operating hours: 700 hours. Characteristics: - Double door arrangement for high productivity - Precise drive system - Planetary drive for even coating - Vertical arrangement of the substrate holders - Modular and very flexible structure - Annealing pretreatment by alternating or direct current - Annealing pre-treatment by MF (40 kHz) - Recipe management and process visualization - Base coat - PECVD process - Top Coat (protective layer) - PECVD process - Highly effective and fast vacuum system - Remote maintenance Typical applications: - Automobile – inside and out - Cosmetics - Household and furniture - Glass and bottles - Decorative  ...

Description COMPLETE WASHING LINE Stainless steel tank Umbra Meccanica 5mt x 1,5 mt x 1,8 mt anno 2008 Horizontal Centrifuge Italrec K 117I01 anno 2011 Stainless steel loading auger Dry material extraction fan

FOBA DP 15 Marking Laser The FOBA DP 15 laser marking system uses a fiber laser with a wavelength of 1064 nm and a lens focusing of f=254 mm (254 mm focal length). This combination enables the permanent and sharp marking of materials such as metals and plastics by the "all-round laser". The 1064 nm wavelength is well absorbed by many materials, which can be used for annealing marking, color change, or material removal. Application: The fiber laser is a versatile "all-round laser" for marking industrial products. It is ideal for metals and a wide range of plastics. The technology enables permanent, legible and precise marking. Functionality: The laser beam creates a focused point of light that penetrates the material. Depending on the material and settings, various effects can be achieved, including: Annealing: A change in color of the material due to heating. Color cha ...

roll diameter: 520 mm throat: 520 mm workpiece height: 310 mm cutting speed: 25 - 500 m/min table surface area: 600 x 500 mm band length: 3.880 x 3-16 mm mm Table tiltable up to: 15° Grad work height max.: 1000 mm total power requirement: 1,5 kW weight of the machine ca.: 500 kg. dimensions of the machine ca.: 1,3 x 0,76 x 2,14 m Furnishing: - Solid gray cast iron table - Safe working is guaranteed by the large contact surface - Standard with band welding device, annealing device - Scissors and sharpening stone - As standard with continuously adjustable cutting speed - Machine body made of robust steel construction for smooth running - Precision blade guide for optimal cutting results - Ideal for sawing complicated contours and shapes - Work table can be swiveled by 15 ° in all 4 directions - Blow-out device with compressor included in delivery - For radius sawing saw bands from 3 mm w ...

Model: BAS 051. Automatic Flash Butt Welding Machine for Band Saw Blades. Pneumatic clamping. Annealing pyrometer. Inserting bar for blade positioning. UniOp automatic annealing temperature control. Machine cleaned and repainted. Year of manufacture: 2001. Nominal primary voltage: 380 [V AC]. Max. welding rating: 8 [kVA]. Clamping force: 20 [kN]. Forging force: 5 [kN]. Welding ranges. Band saw blades for wood: 6-50 [mm]. Bi-metal bandsaw: 6-41 [mm]. Hoop knives: 6-50 [mm]. Stainless steel bandsaw: 6-30 [mm]. Weight: 600 [kg]. Dimensions (WDH): 135010001700 [mm]. Instructions and packing included.

Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault desp ...

Overview  This low-pressure air compressor was manufactured in 2013 by the Swedish company Atlas Copco, a global leader in industrial compressed air systems. The GA132 VSD model delivers up to 24.1 m³/min of air at a maximum pressure of 8.5 bar. The unit remains installed and connected, is in excellent operating condition, and is immediately available. The annual maintenance was completed in August 2025, and spare parts are included. An Atlas Copco air dryer can also be provided upon request. Technical data  Operating Pressure: 7–8.5 bar Air Capacity: 24.1 m³/min Power Supply: 132 kW Weight: 4,075 kg Condition: Excellent, annual maintenance completed August 2025 Optional equipment: Atlas Copco air dryer available Status: Installed and connected, fully functional

Micro Brewery 2-Vessel 5hl Braukon 750hl / annum The brewery is a modular 5 hl two-vessel Braukon brewhouse system with a separate whirlpool, designed for production of both top- and bottom-fermented beers. Brewing is controlled with manual valves, but brew vessels and temperature controls are made with Braukon brew control PLC. Upto 18° Plato high gravity beer production is also possible with this brew line. Brew vessels are bottom heated with hot water generated with plate heat exchanger from low pressure steam and wort is heated with external boiling system. The 2-vessel system is constructed entirely in stainless steel (AISI 304) and delivered as a fully integrated, pre-piped and pre-wired unit, enabling rapid relocation works. Nominal capacity is 3–4 brews per day, depending on recipe and process parameters which is approx. 750 hl/annum. Brew control is semi-automatic and made ...

Used continuous flow oil extraction lineTechnical Specifications & Performance DataThis complete olive oil processing line is engineered for continuous operation and dependable seasonal throughput. Built around continuous-cycle technology, it combines crushing, malaxing, separation, and filtration with pneumatic management to deliver stable, high-quality olive oil ready for downstream industrial packaging and bottling.Production capacity: about 20 ql/h (expandable by upgrading pumps)Line configuration: 2 continuous-cycle linesPrimary equipment: crusher with variable speed and gear pump group, malaxers (5 ql and 7 ql units), centrifuges, stone mill, filters with trays, gear pumps, water pumps, sorter with belts and hoppersCentrifuges: 2 units, 7–8 ql/h eachMalaxers: 5 units x 5 ql; 4 units x 7 qlFilters: 2 units with 4 traysStone mill: 1 unit, 7 qlControl medium: compressed air for a ...

PICKLING LINES, TANDEM MILL, 18 ANNEALING FURNACES, TEMPER MILL, SLITTING LINES, SHOT BLAST MACHINE, STRIP WIDTH: 1000-1279 MM, ENTRY THICKNESS: 1.8 - 4.5 MM, EXIT THICKNESS: 0.7 MM

MFC.: HÄNDLE, LINGL, RIETER, BUILT: 1959-2008, CAP.: 20.0 - 26.0 MILL. NF/ANNUM, INDIVIDUAL ITEMS FOR SALE!

Ladies and gentlemen, follow an offer for a field hospital. The equipment depends on the wishes of the buyer of the field hospital. Of course, containers can also be delivered instead of tents. Below and in the attached annexes, please refer to the corresponding configuration and components of a possible field hospital. They are welcome to adapt to their needs, accept or omit things. The field hospital for 100 people shown here. The equipment is basically optional. We are also happy to supply only the pure hardware component. We can also assist with the construction and operation at any time. If this product is of interest to you, we will be happy to provide you with a complete and detailed offer. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreement ...

FORMAT: 1 DF-20 DF, 26 MIL. NF PER ANNUM, FORMING, MOULD TRANSPORT, DRIER TRANSPORT, DRIER, SETTING DEVICE, KILN ETC.

Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalElec ...

ISO refrigerated container 20ft standard box, manufactured to ISO 1496-1 Type: 22R1 State - used and processed (on request new paintwork at an extra cost!) - Current PTI check - CSC approval - ready for immediate use Visit of our offered containers is possible at any time on site! Color Pure white RAL 9010 TECHNICAL DATA - Dimensions on the outside: (L x W x H) 6,058 x 2,438 x 2,591 mm - Dimensions inside: (L x W x H) 5,412 x 2,292 x 2,300 mm - Volume: 36.5 m3 - Weight: 2.88 t - Payload: 21.12 t - Temperature range: -25°C to +30°C - Refrigeration carrier: R134a - Power: 6-10 kW/h (indicative! Real values depend on several factors.) - Cooling unit: Carrier Streamline (2006 built), 380-460 V, 50-60 Hz, 5-pin plug/CEE 32A - Transportable and crane-capable - PTI check (= Pre Trip Inspection) function check - CSC safety approval SPECIAL USE / CONVERSION (on  ...

Qty. 1 Second-hand continuous galvanising line Mfc.: POSCO Built: 1997 Capacity: approx. 100 000 per annum Strip width: 720 – 1250 mm Thickness: 0.2 – 1.6 mm De-Coiler ID 508 mm OD 2000 mm Weight: 20 Tons Finished product: Coil Strip width: 720-1250 mm Thickness: 0.2-1.6 mm ID 508 mm OD 1600 mm Weight: 10 Tons Sheet Strip width: 720-1250 mm Thickness: 0.2-1.6 mm Weight: 3 Tons Line speed Entry section: max. 150 m/min. Process section: max. 120 m/min. Exit section: Coiling max. 150 m/min. Shearing max. 100 m/min. Threading speed: 20 m/min. Coating method Both sides coating, Regular spangle Coating weight 120-500 g/m² based on both sides Post treatment Chromating Electricity High voltage 10 kV Low voltage 380 V AC, 3 ph., 50 Hz, 220 V AC, 1 ph. Water Pressure min. 3 kg/cm² Steam Pressure min. 5 kg/cm² Temperature min. 158 °C Production process Coil s ...

Fully automatic labeling system to provide bottles on both sides with a label. This machine is a "new exhibition machine" Further we can announce details by mail. You will find more machines under: abc://abc.resale.de/angebotelinkd-user.php?myid=35837 & dealer = 1 & order = 1 & or abc://abc.resale.de/angebotelinkd-user.php?myid=35846 & dealer = 1 & order = 1 &

Qty. 1 Second-hand skin pass mill Mfc.: Mannesmann Demag Sack Built: 1980’s Modernised in 1986 & 1993 Type: Duo Cold Rolling Mill – Non-Rev. Dia. 330 x 500 mm Material: Carbon steel, cold rolled and annealed Strip width: 80 - 470 mm Thickness entry: 4.0 mm Exit: 0.2 mm Decoiler Modernised in 1986 ID: 400 with segments 500 & 600 mm Spreading range: 370 – 420 mm Strip tension: 1300 – 65 daN Braking system: Generator Braking torque: max. 1300 daNm De-coiling speed: 2.5 m/sec. Coil cross section: 20 – 1880 mm² Coil weight per mm strip width max.: 10 kg Coil weight: 5.0 T Coil ID: 400 & 500 mm Coil OD: 600 – 1400 mm Roll dia.: 300 – 330 mm Roll length: 500 mm Roll force: 1850 – 2400 kN Min. roll force: 150 kN Hydraulic roll adjustment Adjustment stroke: 80 mm Adjustment speed: 1 – 3 mm/sec. Rolling speed: 2.5 m/sec. (150 m/min.) PLC system: ...

Double vacuum laminator ICOLAM 42/24 Meier Year 2009 Spaces: 2400 x 4200 x 40 mm Total weight: 27 tons Power supply: ca 260 kW Suction volume prechamber: 630 m 3 x 2 High vacuum suction quantity: 2000 m 3 x 2 Type Icolam 42/24 Usuable working size 4.1 x 2.3m Useable sqm 8.51 6 modules per pass Laminator for the encapsulation of photovoltaic modules, is a system running parallel designed for an annual capacity of ca 75 MW, New price 1.350.000,-€ net The laminator is completely dismantled, has produced approximately 3 months of sporadic, used tracks have been hardly visibly during disassembly He is without electric and control cables, ca 10 fixed hydraulic lines are also missing. Control cabinets, vacuum pumps, documentation and accessories are otherwise completely 12 large parts are 6 m long and 3.4 m wide, DON'T go TO a UeBERSEECONTAINER CA 3 trailers material

Annealing oven box furnace KU500 all4-PCB from the Switzerland The investment is for the production of thin-film - photovoltaic modules CIS / CIGS (module size 1250 x 650) bildungsportal. The task of the furnace is to anneal coated substrates in the production process. Cycle time 50 sec (first stage) Year of manufacture 2010 300 running BRA, mint already properly decomposed, which is not the original on the images, which has eight dry fan New price 306.000,-net

High pressure cleaner PTC CJ-1E similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 110 bar - Foerder quantity: 12 l/min. - Motor: Electric 4-pole 230V 2.2kW, 1400 1-min - Dimensions: 540 x 440 x 680 mm - Empty weight: approx. 40 kg - High pressure pump: Comet three-plunger pump with ceramic plungers - Stable plastic housing made of injection moulding - Practical holding device for gun with lance - Self-priming pumps with EASY-START equipment - Handle with brackets for the power cord and the high-pressure hose - Easy maintenance by simply removing the front panel - Large wheels (220 mm) for easy movement on steps and over uneven terrain - Manometer - Built-in professional relief valve - Delayed TotalStop - Pulsating system - Rotary switch - Thermal motor protection - Manual stainles ...