animal feed used for sale

height of spindle adaptable: by hand spindle diameter: 35 mm motor: 3/4 kW

curved conveyor belt bend 90? width carpet 500 mm total width 700 mm min/max height 890/990 mm length inner size 2800 mm engine 0.55 kW

Robot Maximum reach: 3195mm Rated payload: 180kg Maximum payload: 230kg Maximum supplementary load, rotating column / link arm / arm: 300kg / 130kg / 150kg Pose repeatability (ISO 9283): +-0,07mm Number of axes: 5 Mounting position: Floor Footprint: 754mm x 754mm Weight: 1017kg Protection rating (IEC 60529): IP65 Running hours: 1053h Vacuumsystem Dimensions: 1700mm x 900mm 350mm Construction of 56 SCHMALZ cups dia 50 and 70mm with pushrod for loosen plate FESTO components for compressed air/vacuum Each cup separately controlled by FESTO controller Communication via Profibus

In its original box. Never used. Carton size: 83 x 50 x 13 Auction-ID: A1-48310-497

In its original box. Never used. Carton size: 83 x 50 x 13 Auction-ID: A1-48310-498

In its original box. Never used. Carton size: 52 x 52 x 10 Auction-ID: A1-48310-1788

In its original box. Never used. Carton size: 52 x 52 x 10 Auction-ID: A1-48310-1787

: neu : ca. 12 Wochen ab Auftrags : Türkei : 13760 € : 264.19 € : 0.4 - 2 mm : 400 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

< Year: 2023 Manufacturer: Ecokraft Features: industrial system with hopper, two motorized drives and control cabinet, intended for feeding/dosing pelletized material. Dimensions (mm): est. 3500 x 1200 x 2800 Auction-ID: A1-48428-6

Workpiece return / return Ligmatech Type ZHR 15/13/L Year of Make: 1994 CE with 2 divided conveyor belts, each approx. 3 m + 2 m long was used on an edge banding Holz-Her 1426 year 98 Workpieces can be turned to the operator with 90° rotation or without rotation, the rotation can be switched off. Automatic rotation according to the plate size, the Plate size is recorded by sensor. Different part dimensions can be automatically can be controlled. Also suitable for transporting parts to the next workplace.

: neu : 2018 : 070033 : prompt, Zwischenverkauf v : Türkei : 20310 € : 389.95 € : 1 : 0.6 - 4 mm : 300 mm : 900 mm² : 80 mm : 10 Nm : 2.62 kW : 1000 mm : 800 mm : 1400 mm : 330 kg DEMO MACHINE helical gear box Wattdrive pneumatic equipment Festo control SCHNEIDER with touchscreen 2 driven rolls remote service module hand wheel Euchner operating manual in German with EC conformity declaration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vibratory feeder Manufacturer: Fimotec-Fischer Type VZ-40-SZ consisting of: Vibratory feeder with sheet steel cylinder vibrating shells Bunker feeding system Control mounted on a work table very good condition Documents: Nameplate

Ref.nr. 00914 For sale is an OKUMA Soarer L270E CNC chuck lathe with the proven OKUMA OSP-U10L controller. The machine is suitable for versatile Turning operations in individual parts and series production and impresses with its robust design and the high reliability of the OKUMA control system. The machine is but the spindle should be restored. Manufacturer: Okuma Model Soarer L270E Year of manufacture 2001 Technical data: Control: OSP-U10L Turning length: 500 mm Circumferential diameter over bed: 530 mm Design: CNC chuck lathe Condition: Machine functional Spindle bearing in need of repair / should be replaced Condition OK

Manufacturer: Top Automazioni Model: ETL 10-65 Year of Manufacture: 2018 Machine Type : Automatic bar loader CE marked: Yes Technical data Maximum bar length: up to 3200 mm Weight: approx. 2500 kg Configuration and compatibility Originally installed on: Emco Maxxturn 65 Supplied as: Top Load version via Emco, manufacturer is Top Automazioni Included in sale: Bar loader including control unit Condition : The bar loader is in good, age-appropriate condition. No known damage. Fully functional before shutdown. Find more here - / Contact us at -

Used BERTOLASO cap feedere - Year 2001Technical Specifications & Performance DataThis Bertolaso cap feeder unit is engineered to automate the supply of closures to capping machines in beverage production and industrial packaging environments. Built in stainless steel for durability and hygiene, it streamlines cap handling by automating feeding, orientation, and elevation, ensuring steady and reliable delivery to downstream cappers on a used bottling line or second hand packaging system.Manufacturer: BertolasoModel: Cappa RiempitriceYear: 2001Speed: 3.000 - 7.000 Caps/hourPrimary function: Automatic cap feeding, orientation, and elevationConstruction: Stainless steel frame and componentsHopper: Large stainless steel hopper for cap storageElevator: Inclined elevating channel for cap transportControls: Dedicated electrical panel with main switch, emergency stop, and push-buttonsElectrical d ...

Manufacturer: HAWE (Heinrich Wester) Type: SMW 2 RO Year of construction: 1996 Single-axle straw distribution wagon Scraper floor with chain conveyor Hydraulic drive Bearing of a roller defective Machine otherwise functional Used condition with signs of wear due to age Auction-ID: A1-48283-1067

All-in-one device UTAX 4006ci with paper feeder PF-7100, 320 GB HDD, meter reading 19.824, Attention: The goods are issued/handed over ON the loading ramp! A vehicle with a lifting platform or a vehicle with a pallet truck is required for collection (trucks with max. 7.5t - larger / longer trucks may touch down!). For all other vehicles, you need enough strong people or appropriate ramps to lift / transport / load the goods from the loading ramp!

Equipped with: transport crate 1: 2040x1440x1300mm 600kg, transport crate 2: 4100x1060x490mm 500kg, used for photo frames. The Autobyte 3602D is an automated cutting system with high-quality Morso guillotine knives for perfect angles in wood, plastic and MDF. With a capacity of more than 500 frames per hour, you save material thanks to the minimal cutting loss margin of only 1 mm (instead of 6 mm with conventional saws). The automatic material loader picks up to 13 lengths, clamps hold everything firmly and a splitter sorts the saw pieces and removes the debris. Control via Mitsubishi touchscreen and PLC, pneumatics from SMC. Auction-ID: A1-47350-9

Equipped with: silage bucket, single mixing roller, conveyor belt, PTO shaft Auction-ID: A1-47379-255

material width: 650 mm material thickness: 0,8 - 5 mm Feed speed: 8 m/min. total power requirement: 10 kW weight of the machine ca.: 1,5 t Material width: 650 mm Material thickness: 0.8 – 5.0 mm Feed speed: 8 m/min Total power requirement: 10 kW Machine weight: approx. 1.5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Jauhetekniikka oy ingredient feeding station for dough production, 230 V, 4.6 A, 1.1 kW, 14 stations, inside dimensions bunkers: (14x) 570 mm x 350 mm x 850 mm, diameter screw: 80 mm, tier: 40 mm, weighing cels, total dimensions: 6000 mm x 1350 mm x 1120 mm.

Used bar feeder, Irco Breuning SiMag 50.1 - 3000, very good condition. RAL 7035, 2014;

Container volume approx. 9 to 11 m3 total length approx. 4.80 to 5.30 m total width approx. 2.10 to 2.30 m total height approx. 2.40 to 2.65 m power requirement from approx. 50 to 60 hp Auction-ID: A7-48614-32

✔ Air conditioning available and working. ✔ Reversing camera available. (as well as possibility to connect cameras) ✔ Closed comfort cab. ✔ Release belt at the back. ✔ Gross vehicle weight: 18,000 kg ✔ Max. axle load front axle: 11,500 kg ✔ Max. axle load rear axle: 10,000 kg ✔ Power: 185 kW (252 PS) ✔ Stainless steel body! Auction-ID: A3-46192-13053

Kuhn PROFILE 1 DS D-G vertical feed mixer from year of manufacture 2020. Equipped with one vertical mixing auger, electronic Kuhn KDW 341 weighing device, hydraulically operated unloading door and side discharge via cross conveyor belt. Trailed version on single bait with PTO drive. Compact model with a capacity of 4.1 m³, suitable for mixing and distributing rations on dairy, beef cattle, goat and sheep farms. Auction-ID: A3-46192-13092

Turning diameter over support: 200mm. Including various machine accessories and \"Quick Load\" automatic bar feeder, dimensions: 1950x1400x1600mm Auction-ID: A1-48414-27

Includes \"Hayfran\" eco 21 chip conveyor, \"Hatec\" AM90 material feed, HP computer, various tools, chuck jaws, and steel tool cabinet Technical specifications: Swivel diameter above the bed: Ø 520 mm Turning diameter above the support: Ø 420 mm Maximum turning diameter: Ø 381 mm Maximum turning length: 600 mm Length between centers: 750 mm Spindle passage: Ø 76 mm Main spindle motor: 15 kW Maximum spindle speed: 3,200 rpm Auction-ID: A1-48414-4

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12150 € : 233.28 € : 0.4 - 2 mm : 100 mm : 200 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Consists of: Sgariboldi Type: Monofeeder MAV 5217 Model: 5217 Year of construction: 2011 Serial number (Matricola): M17. E.012.04.11 Mixing tub capacity: 17 m³ Mixing System: Horizontal Monofeeder Auger Engine power: 132 kW (approx. 180 hp) (machine nameplate) Max. hydraulic pressure: 350 bar Max. auger speed: 2,400 rpm Tare weight according to type plate: 10.300 kg Maximum permissible weight: 15,700 kg Drive: Self-propelled, hydrostatic Steering: 4WS (four-wheel steering) Weighing system: Electronic with cab display Automatic lubrication: SKF central lubrication system Camera/Monitor System: PSVT Dimensions (factory specification MAV 5217) Length: approx. 9,000 mm Width: approx. 2,200 mm Height: approx. 2,800 mm Loading cutter width: 1,500 mm Maximum loading height: approx. 4,700 mm Visible execution Closed comfort cab Hydraulic Loading Cutter Side Output Belt Electronic weighing syste ...

Equipped with 2 mixing augers; 2 speeds; double-sided ejection; Steered rear axle Auction-ID: A1-47380-208

Equipped with: towing eye, weighing device, PTO, double-sided hatch, Dutch registration Auction-ID: A1-47380-55

: neu : ca. 8 Wochen ab Auftragse : Türkei : 29460 € : 562.69 € : 0.4 - 4 mm : 100 mm : 400 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4-axis SCARA industrial robot, reach: 600 mm, max. payload: 3 kg, pneumatic parallel gripper, pneumatic machining/cleaning station, EFD precision feeder or application valve, Festo maintenance unit, Festo valve terminal, light curtain for personal safety, control panel with start/stop and emergency stop function, control cabinet with robot control, aluminium profile frame, pneumatic and sensor system Auction-ID: A7-48794-420

WOLTERS TFG 150 Through-Feed Grinding Machine (2008) serial number: 625 TFG 405941 control: SIEMENS grinding wheel diameter: approx. 457 mm grinding wheel thickness: approx. 64 mm min. workpiece diameter: 12 mm min. workpiece height: 1 mm max. workpiece width: 152 mm max. workpiece height: 152 mm max. workpiece length: 500 mm spindle power: 18.38 kW max. spindle speed: 1200 rpm Auction-ID: A7-48794-4

2 x 1500 x 850 x 2000 mm, accessories may vary, DEPRAG eacyfeed screw feeding system Auction-ID: A7-48794-426

Basket size LxWxH:800 x 500 x 400 mm Max. basket weight:250 kg No. of washing chambers:1 No. Of tanks for washing:1 Electrical heating power:7,5 kW Rated power supply:8 kVA Machine size LxWxH:1,5 x 1,15 x 0,9 m Ultrasonic cleaning machine with 28 or 40 khz generator

Basket size LxWxH:600 mm Max. basket weight:80 kg No. of washing chambers:1 Temperature for washing water:60 °C Electrical heating power:4 kW total power requirement:5 kW Loading:Höhe bis 300 tank capacity:50 l Capacity:60 l/min Machine size LxWxH:0,75 x 1,0 x 1,2 m Stainless steel high pressure cleaning machine for industrial use with basket diameter 600 mm Workpieces will be cleaned with hot water, cleaning compound and high pressure in turnable baskets - pneumatic spring supported machine lit - stainless steel driven basket - spraying bars and pump stainless steel design - loading basket with Jog function

Basket size LxWxH: 900 x 500 x 450 mm Max. basket weight:300 kg No. of washing chambers:2 No. Of tanks for washing:2 Electrical heating power:24 kW Rated power supply:30 KW tank capacity:250 / 180 l Capacity:140/120 L Machine size LxWxH:1,9 x 1,5 x 2,7 m Cleaning device with 3 steps and basket dia. of 900 mm PLC control, tank exhauster pump

Max. basket weight:50 kg Temperature for washing water:0-60 °C Electrical heating power:2 kW Rated power supply:230 V Machine size LxWxH:600x800x1650 mm Machine weight:90 kg DIMENSIONS DxWxH 600x800x1650 mm POWER SUPPLY 230 V DETERGENT water PUMP POWER 1.2 kW TANK CAPACITY 100 l LOAD CAPACITY 50 kg HEATING ELEMENTS POWER 2 kW HEATING TEMPERATURE 0-60° WORKTOP DIMENSIONS 750x550 mm WEIGHT 90 kg