animal feed used for sale

M. No.: 91-1101

Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin.

Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet  ...

Bundle/Stream feeders Built in 2001; working condition

M. No.: 2069056 Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlap ...

Reference Num.: 3463 Brand: Kuvertanleger / Envelope Feeder Type: UEK 335 Construction year: 1988 Available: directly Status: In production Location: Deutschland

Alpha envelope feeder, need new feeding track.

-Year 2005 -Suitable for Heidelberg Speedmaster 52 -Size: Max. 370x520 mm, Min. 100x100 mm -Speed: Max. 15000 /Hours -Adjustable Height -Delivery belt with adjustable speed and height

Envelope feeder PGF Maxi Feeder; cleaned and tested; minimum. Format 100x105mm, max. 450x500mm; motorized height-adjustable; suitable for various machines. Envelope Feeder PGF Maxi Feeder; cleaned and checked; min.size 100x105mm, max.450x500mm; adjustable hight by motor; used for different machines.

Dimensions (L/W/H): 0x0x0 mm Weight: 65 kg Total power requirement: 0,75 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 57 kg Total power requirement: 0,4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 60 kg Total power requirement: 0,4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 35 kg Total power requirement: 0,2 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mm Weight: 61 kg Total power requirement: 0,75 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Envelope feeder suitable for C4 and B4 envelopes

Reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press -Handover: in its current condition as inspected -Condition: without drive motor, without control unit, see photos -Manufacturer: Cisam Impianti, FEEDER belt feeding system -Type: 1000/2B -Passage: 395 mm -Transmission: Ratio 68.37:1, max. 251 Nm -Pneumatic cylinder contact force: 1.6 tons -Individual components: see photos -Dimensions: 1340/920/H1690 mm -Weight: 829 kg

Including:, GEA PlatForm, Serial number: E010990205326, Year of construction: 2021, Platform height: 1000 mm, Dimensions: 2000 x 750 x 2100 mm, Machine on weighing cells and including tool trolley, Hopper: +/- 1250 litres, Screw diameter: 225 mm, Infeed height: 2200 mm, Outfeed height: 925 mm, Weighing cells: Flintec SB4-20kN C3, Indicator: Flintec FT-111-W, Power: 3 x 400V, 50Hz, 11kW, Weight: 950 kg

Used combination weigher and raw material feeder manufactured by Ocean System. New: 2019. Technical specifications: 10-head model Power supply: AC 220V Frequency: 50/60 Hz Current: 10 A Power: 1.0 kW Number of heads: 10 Weighing range: 10–1000g Dimensions (L/W/H): 1105/1027/1250 Tray capacity: 1600ml Max. speed: 65 doses/min Number of programmes: 0–99

Iddon Cold Feed Extruder. 2.5" screw dia. 10/1 LD Ratio. Motor Size 20.4/5.5 HP

6 feeders

Colmec Italy 150mm dia coldfeed extruder, roller feed - 200mm wide, Screw length 2000mm, L/D ratio 13:1, with simple Spaghetti die/cutter assembly, jacketed barrel and cored screw for temperature regulation (no TCU's included). with 100HP, 1750rpm, 575V, 3ph, 60Hz AC motor (ex Canada) and controls. Fabricated bedplate. Screw height: 620mm. In very good condition.

Key data: 150 mm

Berstorff Strainer Extrusion Line Consisting of: Extruder Supplier Berstorff Type GE 150KSx16D Year of construction 2007 Pins: 12 Pins per level: 8 Condition: good Weight approx. 10000 kg Screen change: hydraulic, bladder accumulator 20lt / 300Bar D = 200mm Gear pump Supplier: Maag Pump Systems Type: extrex® 110-5 RV Volume 716 cm³ / rev Year of construction 2013 Condition: good Heaters Supplier: Regloplas Type P140 Year of construction various Number 5 pcs. Cooling bath Cooling medium Water above, 2 rows below with 4 fans each Year of construction 2006 Condition: good Dimensions 9m Weight approx. 500 kg Especially 8 fans Installation tape Year of construction 2006 Condition: good Weight about 300 kg

Complete coil-fed cutting and feeding line for disc production Composed of: • Feeder/Decoiler: LARA DEMAE-10000/100/1400-D • Cutter: TIMAC TZZ-1604 with double-station stacker • Shear and feed table up to 1400 mm by LARA Condition: In operation, ready for production. Designed mainly for working with carbon steel, stainless steel, and aluminum. The installation combines a servo-driven straightener-feeder from LARA with a TIMAC circular shear, scrap-cutting shear, and automatic double-station stacker, allowing for continuous, precise, and safe operation. Main components: Hydraulic motorized decoiler with loading cart and loop control via laser sensor. Equipped with safety barriers in the coil loading area for optimal visibility during the decoiling and cutting process. Combined straightener-feeder with 11 rollers and AC servomotor controlled by PLC + touchscreen HMI. TIMAC  ...

SK40 DIN 69871 Oil Feeder met Holder Weldon 40mm A= 65mm For internal cooling for rails without internal cooling through the spindle

SK40 DIN 69871 Oil Feeder Weldon 32mm

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 478 The usefull capacity of the BAADER 36 and 134 herring filleting machine can be increased by a combination with the BAADER 478 automatic feeder wich aligns herring, sprats, sardines and similar fish and feeds them to the processing machine. A variable-speed elevator raises the fish from a water filled hopper and delivers them uniformly to five feed channels. Fish traveling head forward are led directly to the timing device. Fish with tail leading are turned around. The timing device releases single fish synchronized wuth the processing machine and transports them through a back and belly aligning device into the feed troughs of the processing machine. It can be combined with Filleting machine for herring, sardine, Baader 134

Tetra Pak Hoyer Model : FF 2000 Used for : Ice cream Fruit Feeder Y.o.m : 2003 Condition : Very Good

STC conveyor belt, In-feed belt, Dimensions are in the photo album

Mobile inclined conveyor belt, compact and mobile on wheels.

STC in-feed conveyor belt, Measurements are in the photo album

Used Used Feed Boxes Bortolin-Kemo: Year: 2004 Condition: As Is Used Feed Boxes Bortolin-Kemo: Model: feed boxes Year: 2004 Speed: 15.000 b/h Safety protection Code: G 36 More details: https://bottlingscout.com

Used Used Krones 18T 1S Roll Feed Labeller: Year: 2020 Condition: As Is Model: Contiroll - Checkmat Year: 2020 Speed: 30.000 bph 0.5 lt format Type: Rotary labelling machine Direction: Counter-clockwise Plates: 18 carousel plates with belt drive 1 roll-feed station for wrap-around OPP labels Inspection: Carousel label inspection via Krones Checkmat Safety protection Code: EA 708 More details: https://bottlingscout.com

Technical Description - Model: MARK/C 20-32.5 - Manufacturer: ITALPRESSE - Year of Manufacture: 2003 - Line Function: Designed for laminating veneer on chipboard, MDF, and plywood panels. --------------------------------------------------------------- Components of the Line Vacuum Loading Unit: - For loading thin panels from the scissor lift into the brushing machine. - Passage Width: 2000 mm. - Translation Speed: Adjustable 7–35 m/min. - Cycle per Minute: 3–5 (depending on panel size). - Suction Cups: 6. Brushing Machine: - Working Width: 2000 mm. - Max Opening Height: 100 mm. - Rollers: 2 motorized brushing rollers (180 mm diameter), 2 forwarding rollers (125 mm diameter). Glue Spreader (Brand: Osama): - 2 spreading rollers, 2 dosing rollers. - 4 motors. Automatic Press: - Model: MARK/C 20-32.5. - Platens Dimensions: 2000 × 3250 mm. - Daylight Opening: 140 mm. - Thrust: ...

Koppens/CFS Crumb Auger Feeder Model: BRF200 Built 2003 Screw auger feeder designed to feed a breading machine

A used PICK and FEED system from Hundegger, built in mid-2019, very good maintained condition. Available summer 2026, sale as viewed from the FRG location. The system can be demonstrated by appointment. Sale without dismantling by Hundegger.

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 488 Technical description: Power supply: 400 V, 50 Hz, 3 Ph Approx dimensions: 3100 x 1400 x 1900 mm It can be combined with Filleting machine for herring, sardine and mackerel Baader 35

Heidelberg roller feeder, machine number 160612, machine is in good condition, immediately available Iebr Sevvifieb Ta Eoau If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Conveyor - Wittmann Feedmax S3-NET / New, unused (6 pcs.) Year of manufacture: 2023 Location: Lodz, Poland Description: Suction conveyor with a hose and suction probes The conveyor has its own control system. On the control system, you can set the proportions in which the raw material is to be transported It is possible to buy a plastic container as well as a proportional valve for transporting 2 raw materials, e.g. regrind and original Price: On request

Technical Conditions - Application: Outdoor, temperature range –10°C to +40°C, weather-protected - Operation: 8 hrs/day, 1-shift (06:00–18:00) - Material: Pre-sorted KVA (waste incineration slag), 0–500 mm, mixed with wood, plastics, metals, dry - Capacity: ~5 t/h (max. 10,000 t/year) - Foundation: Concrete floor with steel structure Main Components - Feed Bunker with Vibrating Feeder (SFLU 800-2505000) - Input: KVA slag, up to 500 mm - Capacity: 5.0 t/h - Wear-resistant lining (similar to Hardox 400) - Weight: ~5,000 kg - Belt Conveyor FB 1,000 RB (3,000 mm) - Incl. magnetic separator integration - Permanent Overband Magnet Separator (IMP Z-120) - Removes ferrous metals - Sorting Belt Conveyor FB 1,000 RB (6,500 mm) - With hand-sorting section - Belt Conveyor FB 1,000 RB (4,000 mm, swivel type) - Swivelling discharge, manual adjustment - Steel Sorting Platform / Wal ...

General SKU274U477 LocationBarneveld MakeVib Tech Main Features MaterialStainless steel Length2950 mm Width200 mm Specified Features - Vibro feeder Vibro feedercheck Feeder diameter200 mm Feeder length2950 mm Closedcheck Inlet640x330 mm Outletdia. 180 mm With vibro motor0,4 kW, 230/400 Volt, 1460rpm (2x) MaterialStainless steel 1.4301 (304) With jacketcheck General TypeSO 219/2500-UA Year of constructionunknown Mounted on framecheck Floorspace2,8x0,8 m Total height1,8 m Weight600 kgConsumer wastePowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeStarchOther chemicalAgrochemicalsRubberSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherVibro feedersOther pharmaceuticsOrganicsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMinerals & inorganicVib TechIndustries > Recycling > Consumer wasteIndustries > Foo ...

General SKU321U756 LocationBarneveld CEcheck MakeScan Vibro TypeTRS 300x1019 Main Features MaterialStainless steel Length1019 mm Width300 mm Specified Features - Vibro feeder Vibro feedercheck Feeder diameter300 Feeder length1019 Closedcheck InletDia: 250 mm OutletDia: 320 mm With vibro motor0.2 kW, 230/400 volt, 935rpm, (Ex) Vimarc, type FFHE 55-6-1.2, (2x) MaterialStainless steel 1.4404 (316L) With jacketcheck General No.37943 3 Year of construction2007 Mounted on framecheck Floorspace1,7x0,63 m Total height1,33 m Weight230kg ATEX designedcheck Extra Specificationscapacity. 12 ton/hConsumer wastePowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeStarchOther chemicalAgrochemicalsRubberSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherVibro feedersOther pharmaceuticsOrganicsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsBiopharm ...

WR FEEDER LABEL 500L, DEMONSTRATION SYSTEM - Technically overhauled and cleaned by the manufacturer!, With a 2-year warranty!, - Friction feeder with 500 mm product width in the long version, - Encoder kit 1000 pulses, - ALTECH labeler, - Control system for ALTECH, - Automatic delivery with programmable descent, - Stand with H-base on casters, WR FEEDER LABEL is a system for separating and labelling cartons and bags. The encoder enables perfect synchronisation between the removal speed and the output speed of the labels, guaranteeing high accuracy when applying the labels.

General SKU321U754 MakeGea Scan Vibro TypeTRS 300x1019 No.37943 1 Year of construction2007 Mounted on framecheck Main Features MaterialStainless steel Length1019 mm Width300 mm Specified Features - Vibro feeder Vibro feedercheck Feeder diameter300 Feeder length1019 Closedcheck InletDia. 250 mm OutletDia. 320 mm With vibro motor0.2 kW, 230/400 volt, 935rpm, (Ex) Vimarc, type FFHE 55-6-1.2, (2x) MaterialStainless steel 1.4404 (316L) With jacketcheck General LocationBarneveld Floorspace1,7x0,63 m Total height1,33 m Weight230kg CEcheck ATEX designedcheck Extra Specificationscapacity. 12 ton/hConsumer wastePowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeStarchOther chemicalAgrochemicalsRubberSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherVibro feedersOther pharmaceuticsOrganicsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsBiop ...

General SKU321U755 LocationBarneveld CEcheck MakeScan Vibro TypeTRS 300x1019 Main Features MaterialStainless steel Length1019 mm Width300 mm Specified Features - Vibro feeder Vibro feedercheck Feeder diameter300 mm Feeder length1019 mm Closedcheck InletDia: 250 mm OutletDia: 320 mm With vibro motor0.2 kW, 230/400 volt, 935rpm, (Ex) Vimarc, type FFHE 55-6-1.2, (2x) MaterialStainless steel 1.4404 (316L) With jacketcheck General No.37943 2 Year of construction2007 Mounted on framecheck Floorspace1,7x0,63 m Total height1,33 m Weight230kg ATEX designedcheck Extra Specificationscapacity. 12 ton/hConsumer wastePowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeStarchOther chemicalAgrochemicalsRubberSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherVibro feedersOther pharmaceuticsOrganicsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsBi ...

General SKU316W1182 LocationBarneveld MakeHaver &: Boecke TypeUFR 219X2900 No.23/191770/02 Main Features MaterialStainless steel Length2900 mm Width219 mm Specified Features - Vibro feeder Vibro feedercheck Feeder diameter219 mm Feeder length2900 mm Closedcheck InletDia. 150 mm OutletDia. 215 mm With vibro motor2x With motor2x 3 kW, 220-240/380-415 volt, 1500 rpm MaterialStainless steel 1.4301 (304) General Year of construction2002 Floorspace2,85x0,65 m Total height0,80 m Weight180 kgConsumer wastePowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeStarchOther chemicalAgrochemicalsRubberSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherVibro feedersOther pharmaceuticsOrganicsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMinerals & inorganicHaver & BoeckerIndustries > Recycling > Consumer wasteIndustr ...

General SKU316W1181 LocationBarneveld MakeHaver &: Boecke TypeUFR 219X2350 No.23/191770/03 Main Features MaterialStainless steel Length2350 mm Width219 mm Specified Features - Vibro feeder Vibro feedercheck Feeder diameter219 mm Feeder length2300 mm Closedcheck InletDia. 150 mm OutletDia. 200 mm With vibro motor2x With motor2x 3 kW, 220-240/380-415 volt, 1500 rpm MaterialStainless steel 1.4301 (304) General Year of construction2002 Floorspace2,30x0,60 m Total height0,85 m Weight180 kgConsumer wastePowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeStarchOther chemicalAgrochemicalsRubberSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherVibro feedersOther pharmaceuticsOrganicsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMinerals & inorganicHaver & BoeckerIndustries > Recycling > Consumer wasteIndustr ...

General SKU319U745 MakeAEG vibrationstechnik LocationBarneveld TypeGA1712/3240-EY Main Features MaterialStainless steel Length1850 mm Width310 mm Specified Features - Vibro feeder Vibro feedercheck Feeder diameter310mm Feeder length1850mm Closedcheck InletDia:300mm OutletDia:300mm With vibro motorcheck With motor0,55kW, 380/420Volt (EX) Without controlscheck MaterialStainless steel 1.4305 (303) General No.B60217 Year of constructionunknown Floorspace2x0,7m Total height1,1m Weight750kgConsumer wastePowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeStarchOther chemicalAgrochemicalsRubberSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherVibro feedersOther pharmaceuticsOrganicsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMinerals & inorganicAEG VibrationstIndustries > Recycling > Consumer wasteIndust ...

General SKU319U743 MakeAviteQ vibrationtechnik LocationBarneveld TypeR1665/219-E MVD50-4-01 Main Features MaterialStainless steel Length1960 mm Width210 mm Specified Features - Vibro feeder Vibro feedercheck Feeder diameter210mm Feeder length1960mm Closedcheck InletDia:200mm OutletDia:200mm With vibro motorcheck With motor0,55kW, 380/420Volt (EX) Without controlscheck MaterialStainless steel 1.4552 With jacketcheck General No.7304481-002 Year of construction2006 Floorspace2,3x0,5m Total height0,9m Weight170kg ATEX designedcheckConsumer wastePowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeStarchOther chemicalAgrochemicalsRubberSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherVibro feedersOther pharmaceuticsOrganicsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberMinerals & inorganicAviteqIndustri ...