animal feed used for sale

80 x 3800 mm - single-storey warehouse Dimensions 4900 x 750 x 1700h mm - Weight 1440 kg YEAR 2004

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 5 mm up to: 42 mm Length of bars max.: 3200 mm Outstanding length min.: 530 mm Feed range: 0 - 400 mm/s Max. Feed force: 550 N Voltage 50 Hz 3x: 400 Volt Power: 1.5 kW Compressed air from: 6 bar Overall dimensions machine: Length: 4700 mm Width: 915 mm Height: 1200 mm

NNP Hopper and screw feed Stainless, 1000Kg hopper, discharge screw, screw diameter 200mm, screw length 2800mm

Packer with plastic feeder and shrinking tunnel Maximum product dimensions 250 x 300mm

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 1 mm up to: 12.7 mm Length of bars max.: 3200 mm Outstanding length min.: 70 mm Execution: Barrel Voltage 50 Hz 3x: 440 Volt Overall dimensions machine: Length: 5000 mm Width: 400 mm Height: 1200 mm Various accessories:

Type: bar feeder BOOS 322 Year of manufacture/SO/GO: 2012/-/-. Description: Machine in good technical condition. Weight 830kg.

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 3 mm up to: 32 mm

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 3 mm up to: 36 mm Length of bars max.: 3200 mm Overall dimensions machine: Length: 4000 mm Width: 500 mm Height: 1500 mm

Fronius Kd 4010 Timing Tig Wire Feeder With Beam And Torch. Fronius showing some superficial wear, fully operational and working correctly. Brand: Fronius

Description: (pre-silo 1), with 3 vibration units, stainless steel top, chute length approx. 1,800 mm Approx. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 0 kg

Description: (pre-silo 2), with 3 vibration units, stainless steel top, chute length approx. 1,800 mm Approx. Onsite Dimension. (l x w x h): 0 x 0 x 0 mm, weight approx.: 0 kg

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 2 mm up to: 12.7 mm Length of bars max.: 4000 mm Overall dimensions machine: Length: 4500 mm Width: 1160 mm Height: 1200 mm

Volumetric feeder,stainless steel,Seval - 2013,Ø 23 mm screw,variable speed.

Basket size LxWxH:550 x 300 x 350 mm No. of washing chambers:1 No. Of tanks for washing:1 Temperature for washing water:60 °C Ultrasonic cleaning unit with high alloybasket - Ultrasonic frequency 28 kHz - automatic breakdown for heating and ultrasonic for low level water

material width:150 mm material thickness:2,5 mm feed length:100 mm compressed air:6 bar clamping force of fastening pincer:2000 N clamping force of moving pincer:2000 N feeding force:1200 N weight:0,1 t Dimensions (WxDxH):0,35 x 0,85 x 0,5 m

material width:550 mm material thickness:0,4 - 1,6 mm no. of straightening rolls:11 straightening roll diameter:60 mm number of draw-in rolls:4 diameter of draw-in rolls:60 mm band speed:4 - 50 m/min power capacity:3,0 kW weight:1,7 t Dimensions (WxDxH):2,5 x 2,0 x 1,7 m

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up up to: 32 mm Length of bars max.: 3000 mm Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 900 kg Overall dimensions machine: Length: 4000 mm Width: 800 mm Height: 1700 mm

Technical data Bar diameter round up: 3 mm up to: 25 mm Length of bars max.: 3200 mm Voltage 50 Hz 3x: 400 Volt Overall dimensions machine: Length: 4000 mm Width: 600 mm Height: 1600 mm

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 3 mm up to: 32 mm Length of bars max.: 3000 mm Overall dimensions machine: Length: 500 mm

Technical data Bar diameter round up: 6 mm up to: 45 mm Length of bars max.: 2000 mm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 2400 mm Width: 500 mm Height: 1500 mm

material width:500 mm material thickness:0,2 - 3,8 mm feed length:0 - 9999,9 mm number of rolls:2 material cross-cut:128 mm² speed:60 m/min power requirement:2,0 kW dimensions (WxDxH):1,2 x 1,3 x 1,5 m roll feed:Servo control:Siemens S 7, modification 2002

material width:203 mm material thickness:0,1 - 1,9 mm feed length:101 mm weight:0,1 t dimensions (WxDxH):0,5 x 0,8 x 0,5 m

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 6 mm up to: 32 mm Execution: Barrel Oil feeded / flushed Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 400 kg

material width:70 mm material thickness:0 - 1,5 mm feed length:100 mm material cross-cut:60 mm² feeding force:400 N clamping force of feeding pincer:1300 N air pressure - required:3 - 6 bar Weight:0,01 t Dimensions (WxDxH):0,4 x 0,4 x 0,7 m

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   Technical data Bar diameter round up: 5 mm up to: 65 mm hexagon up: 5 mm up to: 56 mm Length of bars max.: 3750 mm Execution: Horizontal Voltage 50 Hz 3x: 200 Volt Power: 2 kW Machine´s weight about: 1450 kg Overall dimensions machine: Length: 5840 mm Width: 732 mm Height: 950-1100 mm

There are two identical machines available, weight: 92kg.

Load capacity: 5600kg, loading volume: 12m³/12000l, top speed: 25km/h, number of augers: 1, tire size: 315/60 R22.5, tire tread depth: 10mm, weighing system: scales, feed discharge: front left, corrosion: visible. Documentation available. On-site inspection is possible.

Motor power: 5.5kW, accessories/documentation are partially available, has been regularly serviced, on-site inspection is possible.

Various SMT feeders are available. 12x vibratory feeders, 189x 8mm feeders, 21x 12mm feeders, 13x 16mm feeders, 12x 24mm feeders, 8x 32mm feeders, 3x 44mm feeders and 10x feeder carriages.

Wheels: 4; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: variable 3 - 18 m/min.; Tripod selectable: Delivery without tripod / optionally the following tripods can be selected: Standard / 1050 / PLUS with counter; Motor power: 0.75kW;

Two identical tamping screws (press screws) overhauled by Andritz are available. Diameter: 14 inches. Documentation available. On-site inspection is possible.

Output: 2-19l/min, hopper capacity: 35l, connected load: 3kW, length: 1220mm, width: 580mm, height: 890mm, weight with control cabinet and pump: 140kg, machine was hardly used.

Suitable for conveying bayonet rings, pneumatic supply: 6bar, with documentation.

Technical data Bar diameter round up: 3 mm up to: 20 mm possible with equipement Length of bars max.: 3270 mm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 5270 mm Width: 1000 mm Height: 1300 mm

Delivery rate: approx. 45/min, filling volume: 0.75l, operating pressure: 6bar, max. head diameter/screw length: 8mm/25mm. Dimensions X/Y/Z: approx. 400mm/400mm/400mm, weight: approx. 40kg.

Length: 4600mm, diameter: 500mm, operating pressure: 8bar, weight: approx. 5200kg. Including gearbox, compensator and chute. Documentation available. On-site inspection is possible. The machine is as good as new and is in its original packaging.

Length: 4500mm, diameter: 630mm, operating pressure: 8bar, weight: approx. 3540kg. Including gearbox, compensator and chute. Documentation available. On-site inspection is possible. The machine is as good as new and is in its original packaging.

Number of pallets: 15, max. sheet format: 3000x1500mm, length: 9830mm, height: 6155mm, weight: 12t.

Bar diameter: 0 mm Bar length: 0 mm Number of bars loaded: 0   MACH-id     5059 MAKE          FMB TYPE            TURBO 5 - 42 YOP        DIMENSIONS Length        6000 mm Width         1000 mm Height        1600 mm

Bearing number: 3685 LOADER Manufacturer: Top Automazioni , Type: 337SX Machine NO.: BRS13122782 RE-S, Year of construction: 2013 Specifications: Stang dia. 6-37 mm rod length 3200 mm Length: 4500 mm, Høhe: , Width: , Weight: 1300 kg

Manufacturer: SKAKO Model: 31514 Vibration motor: Manufacturer: SKAKO Model: 50E Electrical power:300 V; 12,5 A Overall dimensions: 3000 x 1250 x 1000 mm Trough dimension: 2950 x 900 mm

VSA 38 TB Feeder 3 feed rollers Roll diameter 120mm Roll width 60mm 8 speeds (2/4/5.5/6.7/11/12/15/30 m/min) Motor 750W 400V 50Hz projection 1050mm Suspension travel of the castors 25mm 2-stage gearbox Weight 65kg G&STÜ-5114501

Feed length - 0.1 - 6500 mm Width 20 - 300 mm Belt thickness 1.0 - 3.0 mm Material Quärschnitt 500 mm2 motor - 2,2 kW Complete documents more info on request

I sell a cargo loader suitable for industry, for example in wood industry, painting elements or material manipulation etc. Model: Makor ACR/2 Year of construction: 1990 Manipulazion in 90° from Quär- to parallel direction Element length from 1500mm Thrust with electric motor Speed adjustable with gearbox. Fully operational. Available the same. 2 pcs in stock.

Feed screw stainless steel used Manufacturer: KOMEN & KUIN D.V. Diameter approx. 500 mm, Conveying length approx. Mm Stainless steel Drive 3 kW 380 / 420 V Total dimensions approx. 4 x 1.6 x 1.6 m. The screw was mounted on this screw blancher Changes and errors in the technical data and information excepted.

Pivatic perforating and bendingline Line is manufactured 1999 and it has worked very well for us 20 years. Line is bending line with perforation unit and single press unit 35 tn. In line is separate punching unit so you can perforate material and cut it to separate ballet. Also you can use separate press toll in line. This press unit we have not used, because we other presses. FORSTNER coil cradle Weingarten Decoiler Dimeco Coil feeding line decoiler - straightener feeder Automatic Flexible punching and rollforming line for C and sigma profiles with centralized adjustment”, from Dimeco (Spain), installed/commissioned in 2019 Dimeco Coil feeding line PIVATIC coil punching line FIMI Slit Coil Decoiler and reel winder tunçman Extrusion - Single screw extruder LEMO INTERMAT Thermoforming - Automatic Roll-Fed Machine Uhlmann Blister machine Accela-Cota 170 l Tablet c ...

Micro feeders in good condition, Agitator, gear motor, 0.12kw - 10rpm, Thread ø 60, slope 45, core ø 17 Painted steel, buffer tank with full detector Dosing capacity at 50 Hz approx. 70 l/h

Feed channel AVITEQ Length 1200 mm - Width 1200 mm Lined with plastic. Incl.: Control apparatus Stock: 1 piece

Aviteq feed channel Brand: Aviteq Type: OA 1600/400 Length 1600 mm - width 400 mm Drive by means of magnet vibrator Incl.: control apparatus & springs.

Nordberg feed hopper with vibrating channel Brand: Nordberg Dim. Bunker : 3000 x 3100 x 2000 mm Dim. outlet bunker: 2500 x 1200 x 1500 mm. Incl. steel construction Dim. feed channel: length 6000 mm - width 1400 mm. Drive: 2 vibration motors of 7.5 kW each Incl. steel construction Total weight: 28 tons.