angle used for sale

Hydraulic punching machine Brand: Kingsland Model: 115 XS Features: Rated capacity: 115 Ton Maximum punching capacity: 34 x 26mm / 55 x 16mm Stroke length: 80 Plate cutting thickness: 380x25mm / 600x15mm Standard throat: 625 Angle cut at 90º - 150x18mm Cutting angle 45º - 80x10mm Round bar cut - 55mm Square bar cut: 50mm Notched up to 13mm thickness Motor power (three-phase ~): 7.5 kW Dimensions of the machine: 188x79x199cm Weight: 3150kg

TRUMPF TRUMATIC L3030 laser cutting machine manufactured in 2005 in Germany, provides efficient laser cutting while maintaining low operating costs. To machine workpieces, the machine uses a stable 2 kW laser beam, which, guided by a mirror system, achieves extremely smooth and even edges over the entire cutting length. The head and mirrors are mounted on movable components. The TRUMPF laser cutting machine also boasts an extremely stable and rigid work table with a large surface area, which is additionally equipped with an integrated automatic pallet changing system. This solution allows for simultaneous loading and unloading of workpieces during the machining process, which significantly increases production efficiency and reduces machine downtime to a minimum. All this makes the TRUMATIC L3030 laser ideal for even the most demanding applications in any production facility. The tota ...

Hydraulic sheet metal cutting guillotine from Safan Netherlands type VS306, 3100 mm x 6 mm (ST40). The machine has a variable inter-knife gap, and a hydraulically variable knife angle of 0,5 -2 deg. 11 kW motor. The weight of the machine is 6,3 t. The machine is fast. Departure of the bumper 1050 mm. Electrically adjustable cutting length in the range of 10-3100 mm. 2 supports for supporting sheet metal at the front of the machine, gauge of 2500 mm, for cutting at an angle of 90 degrees. Light dash for cutting along the line. Original DTR documentation and safety instructions in Polish.

Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 255-10, 2550 mm x 10 mm (ST40). The machine has a quickly changing knife gap with thickness reading, and a hydraulically variable knife angle of 0.5 -2 degrees. 11 kW motor. Machine weight 8.2 tons. NC electric bumper with position transmitter with readout, bumper travel 1050 mm. Electrically adjustable cutting length in the range of 30-2550 mm. 2 x supports for holding sheets of metal at the front of the machine, plus a 1500 mm ruler for cutting at an angle of 90 degrees. Light line enabling line cutting. The knives are sharp, the machine cuts copier paper. Original DTR documentation

Unique hydraulic folding machine prod. Favrin Lyon type PHMM 3000x10 mm. Setting the bending angle to max. 140 degrees. Bending 3050 x 10 mm steel (18 mm Alu). Hydraulic drive. Controlling the angle from the desktop. Jaw opening 500 mm. The machine can also work as a press brake. 17 kW drive. Weight 13,500 kg. Documentation.

Hydraulic guillotine for cutting sheet metal from LVD Belgium type HSL 31/6 3100 mm x 6 mm (ST40). The machine has a variable knife gap and a hydraulically variable knife angle of 0.5 - 2 degrees. 9kW motor. Machine weight 4.2 t Bumper departure 750 mm. support for supporting metal sheets at the front of the machine, - ruler 2500 mm long, for cutting at an angle of 90 degrees Original DTR documentation and health and safety instructions in Polish.

NC controlled edge bending machine, manufactured by Fasti Germany type 212-20-6 - 2050 x 6 mm. Thickness of bent steel sheet (St40) 6 mm - Alu 8 mm, INOX 4 mm, bending length 2050 mm. Control of the bending angle and departures of the NC bumper. Manual and automatic operation mode. Setting the bending angle to max. 135 degrees. Electro-mechanical drive. Jaw opening 350 mm. 6 kW drive. Weight 4500 kg.

Hydraulic guillotine - Gasparini type CO-2504. Cutting length: 2550 mm x 4 mm, Cybelec DNC 10 CNC control. Full CNC change of the knife angle and the inter-knife gap, set by the computer after specifying the thickness. and length of the material. Cutting programs. Cutting sheet metal in the range of 0.4 - 4 mm. Very large loading depth of 520 mm into the machine body (photos), which enables endless cutting of sheet metal from a roll. CNC stop, departure 10 -1050 mm, retraction, programs. A very accurate and precise guillotine. Machine weight 5 tons. 2 supports and a 2000 mm long angle bracket at the front of the machine. Full original Operation and Maintenance Manual in English, BiHP position manual in Polish. A spare set of new cutting knives.

Hydraulic guillotine for cutting sheet metal by ESPE Strojarne Piesok, type CNTA, 3150 mm x 6.3 mm (ST40). The machine has a variable knife gap and a hydraulically variable knife angle of 1 -2.5 degrees, set from the desktop. 11 kW motor. Machine weight 7 tons. Bumper departure 950 mm. Electrically adjustable cutting length in the range of 10-3150 mm. 2 supports to hold sheets of metal at the front of the machine, plus a ruler for cutting at a 90-degree angle. Light line enabling line cutting. Original O&M documentation and occupational health and safety manual in Polish. The machine is designed for continuous operation - 3 shifts.

Hydraulic guillotine - AMADA type GPX 630. Cutting length: 3100 mm x 6 mm, full CNC control. Variable angle of the knife and the gap between the knives, set by the computer after feeding the gr. and length of material. Sheet metal cutting in the range of 0.4 - 6 mm. CNC bumper departure 10 -1050 mm, retraction, programs. Machine with automatic support for long sheets of cut sheet metal at the back. Raised rear bumper. Machine weight 6.5 t. 2 supports and an angle bar at the front of the machine. The only guillotine on the market up to 6 mm, with such a low demand for electricity, the main motor only - 5.5 kW. Full original DTR in English and Polish, OHS manual in Polish. The machine is little used, the cutting knives are 95% sharp.

Hydraulic guillotine for cutting sheet metal from Darley the Netherlands, type GS 3000-10, 3050 mm x 10 mm (ST40). The machine has a variable knife gap and a constant knife angle of 1.5 degrees. 18 kW engine. Machine weight 9 tons. Electric bumper - bumper departure 950 mm. Electrically adjustable cutting length in the range of 10-3050 mm. A machine with very small external dimensions. A support for holding sheets of metal at the front of the machine, plus a ruler for cutting at a 90-degree angle. Original O&M documentation and occupational health and safety manual in Polish. The machine is designed for continuous operation - 3 shifts.

Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 310-3, 3100 mm x 3 mm (ST40). The machine has a quickly changing knife gap with thickness reading, and a hydraulically variable knife angle of 0.5 -2 degrees. 5.5 kW motor. The weight of the machine is 4.2 tons. The machine is fast and the number of cuts is equal to that of mechanical ones. CNC electric bumpers with a position transmitter with readout, bumper travel 1050 mm. Electrically adjustable cutting length in the range of 75-3100 mm. A system for magnetically supporting large sheets of metal while cutting at the rear of the machine. Support 2000 mm angle bracket, to support sheet metal at the front of the machine. Light line enabling line cutting. Original DTR documentation.

CNC controlled edge bending machine, prod. Fasti Germany type 212-30-4 - 3040 x 4 mm. Bending sheet thickness Steel(St40) 4 mm- Alu 8 mm, INOX 3 mm, bending length 3040 mm. Control of bending angle and bumper departures from CNC, programs. Setting the bending angle to max. 135 degrees. Hydraulic-mechanical drive. Jaw opening 350 mm. Drive 6 kW. Weight 4500 kg.

Hydraulic guillotine for cutting sheet metal by HACO Belgium, type HSLX3013, 3100 mm x 13 mm (ST45), rb. 2001, CE compliant. The most powerful version, for 3-shift work. SC7 CNC control. The machine has a quickly changing gap between the knives with CNC-controlled sheet thickness reading, and a hydraulically variable knife angle in the range of 1-3 degrees. 15 kW motor. Weight 9 tons. Electric bumpers with CNC position reading and setting, bumper travel 850 mm. Supports for supporting sheets of metal at the front of the machine, with a ruler for cutting at an angle of 90 degrees. Original O&M documentation and occupational health and safety manual in Polish. The guillotine cuts sheet metal from 0.8 to 13 mm. Cutting knives 90% new.

Hydraulic guillotine - AMADA type GPN 630. Cutting length: 3100 mm x 6 mm, Variable knife angle and knife gap. Cutting sheet metal in the range of 0.4 - 6 mm. CNC stop, departure 10 -1050 mm, retraction, programs. Machine with automatic support of long sheets of cut sheet metal at the back. Liftable rear bumper. Machine weight 6 tons. 2 supports and an angle bracket at the front of the machine. The only guillotine on the market up to 6 mm, with such a low demand for electricity, main engine only - 5.5 kW. Full original Operation and Maintenance Manual in English and Polish, BiHP position manual in Polish. The machine is hardly used, cutting knives are 95% sharp.

Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 16-310, 3100 mm x 16 mm (ST40) The machine has a quickly changing gap between the knives with thickness reading, and a hydraulically variable knife angle of 0.5 -3 degrees. 21 pieces of sheet metal holders. 18.5 kW engine. Weight 12.5 t. CNC bumpers with reading and setting device, bumper travel up to 1200 mm. 2 supports to hold sheets of metal at the front of the machine, and a ruler for cutting at a 90-degree angle. Light line on the material, lighting, central lubrication. electronic cutting length adjustment 10-3100 mm. Single or continuous cutting with adjustable intervals between strokes. Very fast guillotine. Knives 90% new, cutting material from 0.5 to 16 mm. Original OHS documentation and occupational health and safety manual in Polish.

The machine has a quickly changing knife gap with sheet thickness reading and a constant knife angle. 9 kW motor. Weight 4.5 tons. Electric bumpers with reading, bumper departure 850 mm. Supports for supporting sheets of metal at the front of the machine, with a ruler for cutting at an angle of 90 degrees. Original O&M documentation and occupational health and safety manual in Polish. The guillotine cuts sheet metal from 0.8 to 6 mm. The machine is functional, the cutting knives are 90% new.

Cutting length: 3100 mm x 6 mm, full CNC control. Variable knife angle and knife gap, set by the computer after entering the gr. and length of the material. Cutting sheet metal in the range of 0.4 - 6 mm. CNC stop, departure 10 -1050 mm, retraction, programs. Machine with automatic support of long sheets of cut sheet metal at the back. Liftable rear bumper. Machine weight 6.5 tons. 2 supports and an angle bracket at the front of the machine. The only guillotine on the market up to 6 mm, with such a low demand for electricity, main engine only - 5.5 kW. Full original Operation and Maintenance Manual in English and Polish, BiHP position manual in Polish. The machine is hardly used, cutting knives are 95% sharp.

sheet width: 3050 mm plate thickness: 16 mm distance between columns: 3050 mm : 15-1000 mm cutting angle adjustment: ja ° cutting gap adjustment: ja mm connected load: 30 kW weight of the machine ca.: 14,.5 t dimensions of the machine ca.: 4,0 x 4,0 x 2,55 m Hydraulic guillotine shear with - ELGO control for backgauge - Cutting angle adjustment - Cutting length adjustment - Cutting length limitation (time dependent) - Sheet thickness adjustment - Back gauge with clearance function - Cutting line lighting - Side stop - 3 pcs. support consoles - good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6 mm blade length: 200 mm angle adjustable from - to: 30 - 135 Grad table surface area: 780 x 1000 mm total power requirement: 3,0 kW weight of the machine ca.: 1,1 t dimensions: 1,4 x 0,8 x 1,3 m Hydraulic notching machine - Footswitch - digital angle display - Machine lights - Accessories see pictures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transnorm belt curve conveyor 30°-800-700 IR900 right RA2256 Technical data: Manufacturer: Transnorm Condition: good (used) Conveying angle: 30° Nominal/outer width (NB): 800 mm Belt width (GB): 700 mm Inner radius (IR): 900 mm Overall height (BH): 210 mm Motor height (MH): 450 mm Motor type: SEW geared motor, SA42 DT71D-4 Electrical data: 380-500 V, 0.37 kW Conveying speed: please contact us Scope of delivery: without supports (please enquire if required) Optional: Supports Side guides Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1992 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 30° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte  ...

- Cutting angle adjustment 0° - 45° - Robust touchscreen control panel - Automatic workpiece feed - Torsion-resistant double column construction - Hydraulic infeed of the saw bar via chrome-plated column guide - Slightly inclined saw handle for improved cutting performance and increased saw blade life - Double, hydraulic workpiece clamping - Infinitely variable adjustment of the cutting speed - Programmable, automatic angle positioning in 1° steps from 0° to 45° - High angular accuracy due to precise and stable saw blade guides - Automatic belt breakage control - Belt speed is infinitely variable and is shown on the display - Machine with signs of wear and damage to the paintwork - no functional impairment

Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm Control: CNC, Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table .. The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) .. crosscut saw .. > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate .. > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic len ...

Transnorm curved belt conveyor right bend 180°-800-700 IR600 RA2280 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 180° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DRS71M4/TH Electrical Data: 380-500 V, 0,55 kW Conveying speed: please contact us Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 180° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: ...

Transnorm alignment conveyor inclined roller conveyor 3200-700-685 RA2281 Make: Transnorm Year of manufacture: 2014 Roller width (RB): 685 mm Nominal/outer width (NB): 700 mm Length: 3200 mm Diameter rollers: 50 mm Distance between rollers: 60 mm Roller conveyor motor: SEW drive motor frame height: 100 mm Conveyor speed: contact us Angle rollers: ca. 5° Optional: supports Side guide adapted conveyor speed range with frequency converter Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: gut nominal voltage: 380-500V angle: ca.5° Conveying length in mm: 3200 Nominal / outside width in mm: 700 Roll width in mm: 685 Roll division in mm: 60 Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: bitte Kontaktieren scope of delivery: ohne Frequenzumrichter, without supports and side guides For individual, expert a ...

Transnorm curved belt conveyor right bend 180°-700-600 IR400 RA2222 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 180° nominal/external width (NB): 700 mm belt width (GB): 600 mm innerradius (IR): 400 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DT71D4/TH Electrical Data: 380-500 V, 0,37 kW Conveying speed: 0,67 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: very good (used) Nominal / inner radius in mm: 400 Nominal / outside width in mm: 700 Belt width in mm: 600 angle: 180° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,67 scop ...

Transnorm curved belt conveyor right bend 180°-800-700 IR600 RA2223 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 180° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA32/T DRS71S4/MM05/LN Electrical Data: 380-500 V, 0,55 kW Conveying speed: 0,67 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: very good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 180° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: 0,6 ...

Transnorm belt curve conveyor 90°-890-800 IR600 right RA1170 Technical data: Manufacturer: Transnorm Condition: good (used) Conveying angle: 90° Nominal/outer width (NB): 890 mm Belt width (GB): 800 mm Inner radius (IR): 600 mm Overall height (BH): 210 mm Motor height (MH): 450 mm Motor type: SEW geared motor Electrical data: 380-500 V, 0.55 kW Conveying speed: 0.8 m/s Scope of delivery: without supports (please enquire if required) Optional: Supports Side guides Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1991 condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 890 Belt width in mm: 800 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive Conveyor speed m / s: 0,8 scope of delivery: without supports and sid ...

plate thickness: 4 mm blade length: 205 mm table-size: 700 x 825 mm cutting capacity stainless steel: 3 mm throat: 300 mm strokes: 50 p. min. oil tank: 35 l total power requirement: 3 kW weight of the machine ca.: 720 kg dimensions of the machine ca.: 0,7 x 0,83 x 1,1 m Electric 380 Volt: Hole punching device: Foot switch: Support arms: Squaring arm withh mm-scale: Puch tools ( diverse ): Fixed angle hydraulic asuklink machine, more automatic Cutting gap regulation and HOLE PUNCHING HEAD. The cutting head is guided stably in guide columns over the entire stroke length, so that an exact cut is always made. The cutting angle is negative, i.e. the knives cut from front to back. This means the sheet metal cannot bend move forward. The automatic cutting gap adjustment (patented) works over the lower blades (therefore no tipping of the cutting head and abrasion of the knife tips) and bur ...

pressure: - t punching cross-cut in cmm: - stroke: 20 mm plate thickness: 4 mm blade length: 205 mm table-size: 700 x 825 mm cutting capacity stainless steel: 3 mm throat: 300 mm strokes: 50 p. min. oil tank: 35 l total power requirement: 3 kW weight of the machine ca.: 720 t dimensions of the machine ca.: 0,7 x 0,83 x 1,1 m Electric 380 Volt: Hole punching device: Foot switch: Support arms: Squaring arm withh mm-scale: Puch tools ( diverse ): Fixed angle hydraulic punching/nothing machine, more automatic cutting gap regulation and HOLE PUNCHING HEAD. The cutting head is guided stably in guide columns over the entire stroke length, so that an exact cut is always made. The cutting angle is negative, i.e. the knives cut from front to back. This means the sheet metal cannot bend move forward. The automatic cutting gap adjustment (patented) works over the lower blades (therefore no tip ...

Edge banding installation consisting of the following elements: - feed table TB 10/10/20 - edge bander KAR 610/20/PU/S2 - panel turning station cross/longitudinal TD 51/30/12 - destacking robot KUKA KR 180-2 PA - Ligmatech return system installation specifications: workpiece dimensions length 300 - 3200 mm width 120 - 1200 mm (for dogs), 1800 mm (equal to longitudinal entry) thickness 12 - 60 mm weight max 80 kg edging material 0.4 - 2.0 mm throughput speed 25m/min robot 10 strokes /min Equipment edge bander: Infeed fence automatically adjustable anti adhesive sprayers Squaring device UF20: 2 x 4.0 KW Workpiece preheating Glue application unit PU34 6-fold edge magazine for rolls Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment End trims HL86, pneumatic adjustment phase/straight, 2 motors 0.22 kW Rough trimming: 2 x 0.55 KW Contour trimming FF12 , 4 motors 0.4 kW Pr ...

Weld edge former INDUMASCH SIEGEN Type V 12 Masch. No.: 50674 Year of construction 1992 Material thickness max. 40 mm Bevel angle 45 Working speed approx. 3 m/min. Motor power 2 kW Mains connection 400 volts, 50 Hz - Flow / return - Built-in guide roller for bevel angle 45 - Belt guard missing Dimensions L x W x H 650 x 600 x 650 mm Weight 75 kg good condition; used

Description: factory number: 19.95.926 voltage: 380V/50Hz installed power: 2.5 KW max. cutting section at ,angle of 45 degrees: for O materials: 230 mm for # materials: 230 mm max. cutting section at ,angle of 90 degrees: for O materials: 320 mm for # materials: 280 mm rotational speed: 1500/3000 rpm engine power: 1.8/2.4 kW cooling pump power: 0.1 kW total installed power: 2.5 kW number of moves: 42, 55, 85, 110 saw blade dimensions: 550 x 50 x 2.5 mm stroke of the saw frame: 150 number ,certificate: 193 Approx. Onsite Dimension. (l x w x h): 1,300 x 2,000 x 1,600 mm, weight approx.: 600 kg

sheet width: 3050 mm plate thickness: 12.0 mm ST plate thickness: 8.0 mm VA no. of strokes: 7 - 14 Hub/min down holder: 18 Stück cutting angle: 0.5 - 3.0 ° work height max.: 930 mm back stop - adjustable: 1000 mm Control: SP 8 total power requirement: 22.5 kW weight: 8500 kg range L-W-H: 4180 x 2030 x 2210 mm Furnishing: - electro-hydraulic & slide-guided guillotine shears - including HACO NC machine control SP 8 Pre-selection positioning from the backgauge Digital display of actual value Electro-hydraulic cutting angle adjustment with digital display programmable retraction from the backgauge Programmable cutting length limit Emergency switch - electro-motorized back gauge, on ball screws - manual cutting gap adjustment, adjustable from the rear - Finger protection at the front - 1x side stop .. 1.000 mm - Protective device behind the machine - rear sheet metal slide - 1x freely ...

Description: Technical details: x-travel 600 mm, y-travel 450 mm, z-travel 400 mm, tool holder MK 3, feed continuously 20-600 mm/min, speed 80-3000 rpm, boom adjustment horizontally +/- 15 degrees, Total power requirement 4 kW, additional information: milling head can be swiveled 90 degrees, coolant device, vice, stepless feed 20-600 mm/min, drilling quill (stroke: 80 mm), automatic drilling feed, upper boom angle adjustable: +/- 15 degrees, drilling column swiveling: +/ - 90 degrees, horizontal - counter bearing with drilling quill MK3, angle milling head +/- 90 degrees Approx. Onsite Dimension. (l x w x h): 1,250 x 1,000 x 1,850 mm, weight approx.: 1,000 kg

Key data: 500 mm, 2500 mm, 4 St.

We can offer you following machine (Subject to being unsold ) Terms of delivery/payment: payable before/ by order . All information and offers are subject to our general terms & conditions If there are further questions, don't hesitate to contact us. Planer Paolioni PF500 Year of construction 1996 Manufacturer: Paoloni Italy S/N 0006 Working width 500 mm Number of knives / (strip planer knife ): 4 Length of dressing table ( total ) 2500mm both adjustable tables Stop angle adjustable electric brake       Diameter of the extraction nozzle 150 mm Motor 4kW, 380 V, 50 Hz Dimensions length x width x height: 2500x920x1050mm Weight 680 kg CE marked Technical specifications are subject to change Surface planer Paolioni PF500 Year of construction 1996 Manufacturer Paoloni Italy S/N 0006 Working width 500 mm Number of knives / (strip planer knives):  ...

sheet width: 3100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm no. of strokes: 15 Hub/min cutting angle: 2,0 ° back stop - adjustable: max. 1000 mm down holder: 14 Stück work height max.: 865 mm Column width: 3515 mm throat: 50.0 mm Control: D-Touch 7 oil volume: 200 l engine output: 15.0 kW voltage: 400 V weight: 7.650 kg range L-W-H: 4110 x 2200 x 2100 mm well-maintained / like new condition () New price ~ 45.000 euros Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control (touchscreen) Anti-reflective, robust 7 color touch screen control panel easy positioning to the desired size Positioning accuracy 0.1 mm unlimited material definition in the material library Intuitive menu navigation Separate display for actual and target value Clearance function of the back gauge Cutting length control via a ...

Dimensions: 1520x1020x1260mm, Weight: 1550 kg, Grinding wheel gap: 1.5/50mm, Max.width of wheel in feed grinding: 125mm, Working wheel dimensions (od x id x width): 300x125x175mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8mm, Driving wheel dimensions (od x id x width): 220x125x125mm, Øext.min. driving wheel: 165mm, Working wheel motor power: 7,5Kw, Driving wheel motor power: 0,75Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º

: neu : ca. 10 Wochen ab Auftrags : Spanien : 21200 € : 434.6 € : 1 : 60 to : 250 mm : 5 : 40 x 11 mm : 32 1/min : 350 x 15 mm : 120 x 10 mm : 45 / 40 mm : 10 mm : max. 150x10 mm : 5.5 kW : 1850 mm : 1300 mm : 2100 mm : 1390 kg with bending station 5 working stations flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Assembly is not required - ready to use immediately. Specifications: Working length: 6020mm Working width: 1300mm Space requirements: 6800 x 1900 x 1800 Metal sheet bending thickness: 0.8mm Bending angle: 135° Machine weight: 2900kg Power requirements: 3kw/16A Motor power: 2.2 kW Opening width: 105mm Insertion depth: 1250mm Bending beam thickness: 20mm Offset angle adjustment Characteristics: Ultra fast Hyper production Hydraulic fighting and bending Electric cutting device Automatic and manual angles Automatic by 1000 programs with 16 angles Automation by PLC HMI Touch screen Multi security system Foot switches for 1 operator Longtherm support

max. wheel diameter: 80 mm gear width: 44 mm max. module: 5 min. module: Control: SIEMENS 840 C adjustment axis angle shaping sp. - wp table: -0,5 - +0,5 ° stroke range: 250-1.500 DH/min centre distance table/shaping spindle: -15 bis +170 mm max. stroke length: 55 mm max. helix angle: 45 max. tool diameter: 180 mm feeds:: feed rotation axis of workpiece (100 mm wp diam.): mm/min feed rotation axis of work piece (100 mm wp. diam.: 10-15.700 mm/min feed center axis of machine column: 1 - 3.750 mm/min : 23 kw voltage: 400 V operating frequency: 50 Hz control voltage: 24 V DC total power requirement: kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4,2 x 2,6 x 2,6 m equipment · stroke positioning adjustment controlled by CNC · stroke length adjustment mechanical-manually · machine is fixed to the ground with specific damping shoes (part of the delivery scope) · oil m ...

grinding length: 1.000 mm grinding width: 600 mm workpiece height: 400 mm control: SINUMERK 840 D Grinding Area: : grinding range: max. 1.000 x 600 mm travel cross (z-axis): 540 mm distance table surface - grinding spindle centre: max. 600 mm Travel vertical (Y-axis): 500 mm Max. working height on new grinding wheel: 400 mm workpiece table: : Electro permanent magnetic plate: 800 x 500 mm pole pitch: 18 mm clamping force in 8 levels: - Table drive (X-axis): : Incremental encoder in the longitudinal axis X axi: - table speeds: 2-35.000 mm/min Electromechanical longitudinal movement: - by means of digital servo motor,: - toothed belt and ball screw: - Preloaded precision rolling guide size 35: - Central grease lubrication: - Automatic vertical feed (Y-axis): : min. feed size: 0,001 mm measuring system: Galsmaßstab Max. distance spindle centre - table: 700 Grinding head vertical: 550 mm El ...

Description: 50 x 150 Watt LED PRO Highbay waterproof - LED type: Philips Lumileds - color temperature: 6500K Cold white - luminous flux 19500 lumen - SMD LED - 130LM/W - IP value: waterproof IP65 - driver included - beam angle 90° - product color black - diam Ø 280 x 106mm - material aluminum + PC - mounting kit not included - lifespan 30,000 hours - voltage 30-265V - PF >,0.95 - CRI >,80 - beam angle: 90° - 2 years warranty - suitable for indoor and outdoor use. Approx. Onsite Dimension. (l x w x h): 800 x 1,200 x 1,100 mm, weight approx.: 100 kg

Description: 50 x 100 Watt LED PRO Highbay waterproof - LED type: Philips Lumileds - color temperature: 6500K Cold white - luminous flux 13000 lumen - SMD LED - 130LM/W - IP value: waterproof IP65 - driver included - beam angle 90° - product color black - diam Ø 245 x 102mm - material aluminum + PC - mounting kit not included - lifespan 30,000 hours - voltage 100-265V - PF >,0.95 - CRI >,80 - beam angle: 90° - 2 years warranty - suitable for indoor and outdoor use. Approx. Onsite Dimension. (l x w x h): 800 x 1,200 x 750 mm, weight approx.: 75 kg

Description: 20 x 150 Watt LED PRO Highbay waterproof - LED type: Philips Lumileds - color temperature: 6500K Cold white - luminous flux 19500 lumen - SMD LED - 130LM/W - IP value: waterproof IP65 - driver included - beam angle 90° - product color black - diam Ø 280 x 106mm - material aluminum + PC - mounting kit not included - lifespan 30,000 hours - voltage 30-265V - PF >,0.95 - CRI >,80 - beam angle: 90° - 2 years warranty - suitable for indoor and outdoor use. Approx. Onsite Dimension. (l x w x h): 800 x 1,200 x 1,100 mm, weight approx.: 40 kg

Description: 20 x 100 Watt LED UFO Highbay SLIM waterproof - LED type: Philips Lumileds - color temperature: 6500K Cool white - luminous flux 11000 lumen - LED SMD - 110LM/W - IP value: waterproof IP65 - Driver DOB IC included - beam angle 90 ° - product color black - diam Ø 257 x 70mm - material aluminum + PC - mounting kit not included - service life 30,000 hours - voltage 100-265V - PF >,0.95 - CRI >,80 - beam angle: 90 ° - 2 year warranty - suitable for indoor and outdoor use. Approx. Onsite Dimension. (l x w x h): 800 x 1,200 x 400 mm, weight approx.: 25 kg

Description: 20 x 150 Watt LED UFO Highbay SLIM waterproof - LED type: Philips Lumileds - color temperature: 6500K Cold white - luminous flux 16500 lumen - SMD LED - 110LM/W - IP value: waterproof IP65 - DOB IC driver included - beam angle 90° - product color black - diam Ø 290 x 70mm - material aluminum + PC - mounting kit not included - lifespan 30,000 hours - voltage 100-265V - PF >,0.95 - CRI >,80 - beam angle: 90° - 2 years warranty - suitable for indoor and outdoor use. Approx. Onsite Dimension. (l x w x h): 800 x 1,200 x 850 mm, weight approx.: 30 kg

Description: 60 x 100 Watt LED UFO Highbay SLIM waterproof - LED type: Philips Lumileds - color temperature: 6500K Cool white - luminous flux 11000 lumen - LED SMD - 110LM/W - IP value: waterproof IP65 - Driver DOB IC included - beam angle 90 ° - product color black - diam Ø 257 x 70mm - material aluminum + PC - mounting kit not included - service life 30,000 hours - voltage 100-265V - PF >,0.95 - CRI >,80 - beam angle: 90 ° - 2 year warranty - suitable for indoor and outdoor use. Approx. Onsite Dimension. (l x w x h): 800 x 1,200 x 600 mm, weight approx.: 75 kg

Description: 20 x 200 Watt LED UFO Highbay SLIM waterproof - LED type: Philips Lumileds - color temperature: 6500K Cold white - luminous flux 22000 lumen - SMD LED - 110LM/W - IP value: waterproof IP65 - DOB IC driver included - beam angle 90° - product color black - diam Ø 358 x 70mm - material aluminum + PC - mounting kit not included - lifespan 30,000 hours - voltage 100-265V - PF >,0.95 - CRI >,80 - beam angle: 90° - 2 years warranty - suitable for indoor and outdoor use. Approx. Onsite Dimension. (l x w x h): 800 x 1,200 x 1,200 mm, weight approx.: 40 kg

Description: 60 x 150 Watt LED UFO Highbay SLIM waterproof - LED type: Philips Lumileds - color temperature: 6500K Cold white - luminous flux 16500 lumen - SMD LED - 110LM/W - IP value: waterproof IP65 - DOB IC driver included - beam angle 90° - product color black - diam Ø 290 x 70mm - material aluminum + PC - mounting kit not included - lifespan 30,000 hours - voltage 100-265V - PF >,0.95 - CRI >,80 - beam angle: 90° - 2 years warranty - suitable for indoor and outdoor use. Approx. Onsite Dimension. (l x w x h): 800 x 1,200 x 850 mm, weight approx.: 90 kg