2436 offers angle

maximum number of results exceeded > 1000
please refine your search

Category: 1200: machines and plants for process engineering
New in: 2004
Price: request quote
Location: Land-it IT INTIMAC - Fagnano Olona (VA)
Seller: INTIMAC

Pharmatech Stainless Steel V-Blender Stainless Steel V-Blender Fitted with (2) Angled 650 mm diameter x 800 mm long legs Fitted with 550 mm diameter top lids Feeding common coned 250 mm diameter outlet at 1570 mm height Pallet of Inlet Cones with 250 mm diameter flanged inlets and connecting clamps External Caster Interlocked Operating Control Panel

Category: 107: sheet metal working
New in: 1996
Price: 12.500 €
Location: Wiener Neudorf
Seller: HESSE+CO GesmbH

: 3.040 mm : 1,5 mm : 120 mm : 25 mm : 3.900 mm : 870 mm : 1.300 mm : 1.880 kg with straight rail, attachment rail and radius rail with foot pedal manual rotary shear can be folded away uses manual in GERMAN Does not comply with the current industrial safety regulations (AMVO &, UVV) bending length: 3.040 mm bending power: 1,5 mm opening width of the upper beam: 120 mm bending angle adjustment: 0-180° adjustment of the bending beam: 25 mm intent rails: 10 mm / 24 mm length: 3.900 mm width: 870 mm height: 1.300 mm weight: 1.880 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 202: milling machines
New in: 2017
Price: 550 €
Location: Land-de DE NRW
Seller: MSH-nrw GmbH

-1800 watts/230 V -27000 U/min.

Category: 107: sheet metal working
New in: 1999
Price: 15.800 €
Location: Wiener Neudorf
Seller: HESSE+CO GesmbH

: 6 mm : 3.100 mm : 230 mm : 15 kW : 3.700 mm : 2.850 mm : 1.950 mm : 6.150 kg swing cut construction motorized back gauge with rotary ball spindle digital display and hand wheel for exact adjusting table with balls manual blade gap adjustment cutting line illumination cutting length limitation 1 pce. side lay 2 pcs. sheet support arms 14 pcs. down holders oil filling uses manual in GERMAN and ENGLISH sheet thickness: 6 mm cutting length: 3.100 mm cutting angle: 1°30 gap: 230 mm back gauge motorized: 1.000 mm area motor power: 15 kW length: 3.700 mm width: 2.850 mm heigth: 1.950 mm number of strokes: 15/min weight: 6.150 kg The data for this ad was created with ModulMWS - the software s ...

Category: 105: saws
New in: 1993
Price: request quote
Location: Land-de DE 63322 Rödermark, Odenwaldstr. 63
Seller: Mieth Maschinenhandel

Metal circular machine in table design Technical data: -Semi-automatic with hydropneumatic feed -Workpiece voltage in the pneum. Clamped machine screwstick -Saw flaked diameter 275 mm -Cut speed N 40-80 U/min -Cut range at 90 ° -around 90 mm -Rectangle 120 x 75 mm -Square 75 x 75 mm -Walking adjustable up to 45 ° -max. Opening width of the screwstick 125 mm -Drive 400 V/1.0/1.2 kW -Pneumatic connection 6 bar -Space requirements approx. B 800 x H 1700 x T 850 mm -Weight approx. 200 kg

Category: 107: sheet metal working
New in: 2015
Price: request quote
Location: ab Standort
Seller: Frech GmbH

sheet width: 3000 mm plate thickness: 2,00 mm total power requirement: 7,5 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 4,80 x 3,00 x 2,20 m Equipment: - Controlled back gauge - Bend angle adjustment via touch control - Operating manual - Crowning - Geiáfuá H140 divided, about 3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 1403: other storage equipment
approved
dealer
New in: 1994
Price: request quote
Location: Land-de DE BERLIN
Seller: THAL BAUSATZHALLEN

Isolated warehouse (erected in 1994) with a footprint of around 1000 square meters. TRAGWERK: clear span, bolted steel frame structure consisting of seven main frames with columns profile IPE 500, rafters profile IPE 400 and two end-wall frame structures made of hot rolled steel HEA 180/ HEA 140. The structure is stabilized by pressure pipes (R 114.3 x 5.6 mm, R 101.6 x 3.6mm, 76.1 x 2.6 mm), wall bracings (L 60 x 6.0) and roof bracings (L 50 x 5.0). Wall rails made of square steel tubes (VKR 100 x 4.0 mm, eaves angle iron L 60 x 40 x 5 mm). The roof structure consists of trapezoidal steel sheets (100 N/1.0 & 100 N/0.75). The foundation consists of single/strip foundations. Dimensions  ...

Category: 1900: general inventory
New in: used
Price: used machinery auction RESALE 40 €
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 55 kg Dimensions (l x w x h) approx.: 490 x 270 x 410 mm Description: Angle Plates Surface 490 x 410mm

Category: 202: milling machines
approved
dealer
New in: 1999
Price: 10.900 €
Location: Land-de DE 40764 Langenfeld
Seller: Tischlerei Bracht GbR

Robust swivel shaker type 240A by Panhans Drive engine 7.5kW with automatic engine brake Electric hoehing adjustment with LED display and tip operation Electric swivel adjustment with LED display and tip operation Four speeds, 3000, 4500, 6000 and 9000 u/min R/L run Swivel angle from-5 to 45 degrees A total of 2 quick-change thorns HSK 80, 1 piece with 30mm recording and 1 piece with 40mm shot Comfort strike with hand wheel adjustment and display Ceromaster for easy measuring of Fraeserhoehe Upscale machine table in long execution Retreable factory floor Gussanzee bake with aluminum tongues and an aluminum attack line Stop rotating Pressure device 4 roller feed HolzHer 111 ...

Category: 212: peripheral equipment (e.g. heating, conveying, drying)
New in: used
Price: used machinery auction RESALE 4.900 €
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 2000 kg Dimensions (l x w x h) approx.: 6200 x 1500 x 725 mm Description: Heavy-duty trailer with - double steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - impregnated wood overlay. Capacity 10000 kg Length 4500 mm Width 1500 mm Height 725 mm Rear axle: steerable Front axle: steerable Tire dimensions 425/260 - 305 mm

Category: 301: injection moulding machines
New in: 1997
Price: 22.500 €
Location: Land-pl PL 58-56 Jelenia Góra, MASZYNERIA SP. Z O.O. 18/13
Seller: MASZYNERIA SP. Z O.O.

The line for PVC ZMCH METALCHEM T-60 was built in 1997 years. It is a line for the production of plastic profiles. The line consists of: 1. ZMCH METALCHEM T-60 extrusion: -Construction Year: 1997 -Weight: 1680 kg -Dimensions (L x W x H): 208/105/166 cm, after removing the hopper -Control box, type: T-60 -Weight: 200 kg -Dimensions (L x W x H): 122/46/153 cm 2. Calibrating device ZMP Gliwice WK – 2.7/2: -Construction Year: 1997 -Weight: 1500 kg -Dimensions (L x W x H): 338 frame-Base, 275 unit/135/225 with mast, 195 after dismantling of mast and manometers 3. shutoff-crossing device ZMP Gliwice MCT 30/70: -Construction Year: 1997 -Weight: 750 kg -Dimensions (L x W x H) ...

Category: 103: milling machines
New in: used
Price: used machinery auction RESALE 150 €
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 75 kg Dimensions (l x w x h) approx.: 701 x 300 x 260 mm Description: Milling angle table, Table surface 680 x 235mm, hight 250mm

Category: 301: injection moulding machines
New in: 2003
Price: 22.500 €
Location: Land-pl PL 58-56 Jelenia Góra, MASZYNERIA SP. Z O.O. 18/13
Seller: MASZYNERIA SP. Z O.O.

The line for production of PCV profiles REDOR M-2E PVC was built in 2003. It is a line for the production of plastic profiles. The line consists of: 1. Extrusion REDOR M-2E 180-9-18 -Manufacturer: OBR REDOR-Bielsko Bia?a -Year of manufacture: 2003 -Gear ratio: 18 -Working system: 06A – L -Power kW: 70 for 1500 min-1/47 for 1000 min-1/35 for 750 min-1 -Dimensions (L x W x H): 320 (incl. 70 motor)/80/136 cm after disassembling the hopper 2. Calibrating device Reifenhauser KG KKP 301-2 -Construction Year: 1980 -Dimensions (L x W x H): 220/105/225 cm with mast, 165 without mast -Tray (L x W x H): 305/60/10 cm 3. ZMP Gliwice MCT 7V5 or MCT 7/V1-V5 -Construction Year: 2003  ...

Category: 104: grinding machines
New in: used
Price: used machinery auction RESALE 1.190 €
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 190 kg Dimensions (l x w x h) approx.: 1200 x 750 x 700 mm Description: Tube grinding machine with: - Sanding belt K 40 - With 7 pieces grinding rollers.. 20, 28, 32, 41, 48, 60 and 76mm Bandwidth 100 mm Belt length 2000 mm Belt speed 15/30 m / sec Pipe diameter 20 - 76 mm Angle adjustable from - to 30 - 90 degrees Total power requirement 3.0 kW Machine weight approx. 0.19 t Space requirement approx. 1.2 x 0.75 x 0.7 m

Category: 1601: compressors
New in: 2000
Price: request quote
Location: Land-de DE 35796 Weinbach, Feldbergstraße 6
Seller: Simon Werkzeugmaschinen und Zubehör

Technical data: Operating pressure max. 10 bar Cylinder/Stages 2/2 Adsauulation performance 700 l/min Effective delivery amount 565 l/min Pressure container contents 350 l Compressor speed 990 U/min Engine power 4 kW Electric connection 400/50 V/Hz Compressed air connection 1/2 inches Noise level without sound hood 79 dB (A) Noise level with sound hood 72 dB (A) Dimensions without sound hood (B x T x H) 800 x 660 x 2100 mm Dimensions with sound hood (B x T x H) 1100 x 750 x 2440 mm Weight without sound hood 270 kg Weight with sound hood 330 kg Subject to change and error in the technical details and details. Excerpt from a publicly available d ...

Category: 103: milling machines
New in: used
Price: used machinery auction RESALE 50 €
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 11,5 kg Dimensions (l x w x h) approx.: 280 x 280 x 100 mm Description: Angle vice Jaw width 110 mm Clamping range 100 mm Clamping height 60 mm Weight 11.5 kg Dimensions L x W x H 280x280x100 mm

Category: 103: milling machines
New in: 1995
Price: request quote
Location: Land-de DE 35796 Weinbach, Feldbergstraße 6
Seller: Simon Werkzeugmaschinen und Zubehör

Completely overhaudied 2007 Technical details X Way: 9,000mm Y-Way: 1,500mm Z-Way: 3,000mm Control: Heidenhain iTNC 530 C-axis: 360 ° B-axis: 2-axis swivel head Table size LxB: Swerving 0-90 ° Table diameter: Round table 360 ° indexing Speed: 0-15000 U/min Tool recording: HSK63 Addition: The machine is equipped with a round table (700mm in Y movable). Furthermore, an angle table (tilter) can automatically swing 0-90 ° Most PU foam was processed on the machine. Accessories: A complete suction system for dust. 1 set of tool recordings Additional info: We can offer this machine to you subject to the interim sale: (Changes and errors in technical data, informatio ...

Category: 105: saws
New in: used
Price: used machinery auction RESALE 1.890 €
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 260 kg Dimensions (l x w x h) approx.: 900 x 1600 x 1740 mm Description: Band saw with AutoCut ? miter left 60 ° Cutting diameter 240 mm Saw blade dimensions 2730 x 27 x 0.9 mm Table height 920 mm Cutting speed 35 + 70 m / min Cutting performance at 90 ° around 240 mm Cutting performance at 90 ° square 230 mm Cutting performance at 90 ° rectangle 270x230 Cutting performance at 45 ° around 210 Cutting performance at 45 ° square 200 Cutting performance at 45 ° rectangle 200x210 Cutting performance at 60 ° around 130 mm Cutting performance at 60 ° square 130 mm Cutting performance at 60 ° flat 130x160 mm Total power requirement 1.2 kW Machine weight approx. 0.26 t Spac ...

Category: 1406: conveyor belts
approved
dealer
New in: 2001
Price: request quote
Location: Land-de DE 64720 Michelstadt
Seller: Alfred Feldmann Werkzeugmaschinen

Splitted Band Dimensions see picture/drawing Height cleats 15 mm Division cleats 300 mm Weight: 250 kg

Category: 108: welding machines
New in: used
Price: used machinery auction RESALE 1.350 €
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 50 kg Dimensions (l x w x h) approx.: 800 x 500 x 600 mm Description: 49-piece welding table accessory set 10 L Non-stick welding release agent 10 pcs. Clamping clamping height 300mm, projection 120mm 10 pcs. Clamping bolts 4 pcs. Eccentric 4 pcs. Stop 150mm 2 pcs. Stop 225mm 2 pcs stop 260mm 1 pc. Stop with angle indicator 4 pcs. Angle stop 275 2 pcs. Angle stop 320 2 pcs. Angle stop 350mm 4 pcs. Angle 185x185mm 1 pc. Angle no. 10 2 pcs. Angle no. 11 Other accessories on request. See picture. Without welding table

Category: 1406: conveyor belts
approved
dealer
New in: 2004
Price: request quote
Location: Land-de DE 64720 Michelstadt
Seller: Alfred Feldmann Werkzeugmaschinen

splitted band dimensions see picture/drawing height cleats 15 mm division cleats 300 mm Weight: 250 kg

Category: 104: grinding machines
New in: 2018
Price: used machinery auction RESALE 1.150 €
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 200 kg Dimensions (l x w x h) approx.: 1450 x 700 x 1150 mm Description: Belt grinder with - Sanding belt K 40 - with 1 piece of sanding drum 42.4mm Bandwidth 100 mm Tape length 2000 mm Belt speed 15/30 m / sec Pipe diameter 20 - 76 mm Angle adjustable from - to 30 - 90 degrees Total power requirement 3.3 / 400 kW / V Machine weight approx. 0.2 t Space required approx. 1.45 x 1.15 x 0.7 m

Category: 1406: conveyor belts
approved
dealer
New in: 1990
Price: request quote
Location: Land-de DE 64720 Michelstadt
Seller: Alfred Feldmann Werkzeugmaschinen

Dimensions see picture/drawing Height + tilt adjustable splitted conveyor belt Height of cleats 15 mm Division of cleats 300 mm Weight: 170 kg

Category: 108: welding machines
New in: used
Price: used machinery auction RESALE 1.050 €
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 50 kg Dimensions (l x w x h) approx.: 800 x 600 x 500 mm Description: Starter set 2 for welding tables Consisting of: 4 pcs. Screw clamps 90 ° 2 pcs. Screw clamps 45 ° 2 pcs prism burnished 135 ° 12 pcs. Clamping bolts 4 pcs. Universal stop 225mm 4 pcs. Universal stop 150mm 2 pcs. Angle 175mm 2 pcs. Angle 300mm 1 pc. Anti-stick spray (500ml) 1 pc. Anticorrosive spray (500ml) 1 pc. Burner holder 1 pc. Allen key 1 pc. Round brush 28m 1 pcs. Eccentric stop, diameter 60mm 1 set of spare parts set for clamping bolts Without welding table

Category: 201: saws
approved
dealer
New in: 2015
Price: 16.500 €
Location: Land-de DE 40764 Langenfeld
Seller: Tischlerei Bracht GbR

Cut saelop, frame frame series with automatic layman gas washing Smart Stop A video of the running machine can be sent on request. Cut angle 45 degrees Drive engines 2 x 1.5kW Integrated SmartStop display attack with color touch control Programs for many standard frames, etc. Practical lighting of the sauna interior Maximum frame width about 160mm Maximum frame hoea about 110mm 2 used sae-blades 350mm The Saegeblaetters are freshly disroated and still very good Automatic vertical factory stucco rueters that are motorized by program Measuring device for the frame width Barcode scanner for SmartStop Suction trim 2 x 120mm Compressed air connection 6 bar User manual, English ...

Category: 108: welding machines
New in: used
Price: used machinery auction RESALE 700 €
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 30 kg Dimensions (l x w x h) approx.: 500 x 500 x 400 mm Description: Starter set 1 for welding tables Consisting of: 3 pcs. Screw clamps, clamping height 300mm, variable projection from 40-175mm 3 pcs. Screw clamps, clamping height 300mm, projection fixed 120mm 6 pcs. Clamping bolts 6 pcs. Stop 150mm 2 pcs. Angle stop 175mm 1 pc. Welding release agent E-WELD Without welding table

Category: 309: mills
approved
dealer
New in: used
Price: request quote
Location: Land-uk UK
Seller: Andrew Isaacs Machinery International Ltd

Bridge 60” (1500mm) x 22” (550mm) Bridge Two Roll Mill Right angle drive Slip ring AC motor 100HP Motor overhauled Radicon Gearbox Hand operated nips Rotary Joints for steam heating / water cooling Vibro pads Motorised Grease Pumps Brush 100HP Motor 985 rpm 380 volts Shunt rewound All mounted on a one piece bedplate Complete with panel

Category: 107: sheet metal working
New in: used
Price: used machinery auction RESALE 5.200 €
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 1020 kg Dimensions (l x w x h) approx.: 1200 x 900 x 1200 mm Description: Profile bending machine with: - Foot pedal right / left - Recording: shaft 60mm - with 2-fold digital display - 3 rollers driven - Lower rollers individually hydraulically deliverable - hardened special steel shafts - 1 set of standard rollers Round material solid 50 (500) mm Square material solid 45 (500) mm Angle steel 80 x 80 x 8 (800) mm T - steel bridge to the outside 80 x 9 (800) mm Axis diameter 60 mm Working speed 5.0 m / min Tool diameter 195 mm Total power requirement 3 kW Machine weight approx. 1.0 t Space required approx. 1.2 x 0.9 x 1.2 m

Category: 503: shredders
New in: 1990
Price: 19.000 €
Location: Land-gr GR 16122 KESSARIANI - ATHENS, KASAMPA, 43
Seller: GreenFence

This is a completely refurbished, MULTI-powerful, multipurpose dual axis ARP shredder applications. The machine has gone through complete control and change of all flanges, seals, bearings, reducers and oils. The full specifications of the machine are: -New motors of total power 20hp-15kw (2 x 7, 5kw Motors) -Alternative hydraulic power engines that fit perfectly if the machine needs to operate in a truck. -24 pieces of knife X 20mm per piece -German construction -Cutting chamber 500mm X 575mm -Weight about 2 tons -New control Panel with Siemens PLC, launch star-triangle, surge protection and engine overheat, ammeter with touch screen. -Automatic inversion during overload and op ...

Category: 108: welding machines
New in: used
Price: used machinery auction RESALE 750 €
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 30 kg Dimensions (l x w x h) approx.: 500 x 500 x 600 mm Description: 25-piece welding table accessory set 10 L Non-stick welding release agent 6 pcs. Clamping clamping height 300mm, projection 120mm 6 pcs. Clamping bolts 2 pcs. Eccentric 2 pcs. Stop 150mm 2 pcs. Stop 225mm 1 piece stop 500mm 3 pcs. Angle stop 275, 320 and 350mm 2 pcs. Angle 185x185mm Other accessories on request. Without welding table

Category: 201: saws
approved
dealer
New in: 1988
Price: request quote
Location: Land-pl PL 66415 KÅ‚odawa , Gorzowska 8
Seller: PPHU Lignum Przemysław Kretowicz

Location Gorzów Wlkp. Conditions of delivery own collection Cost of delivery Customer cover Start type to be agreed Description Comments Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments SOLID SAW REMA PRELIMINARY SETTING, UNDERSTANDED UPPER ARRESTER AGAINST CUTTING AGAINST CUTTING WITH POWER CABLE READY TO WORK ENGINE 2.2 kW valid shield diamter 350 mm table equipped with one roll front back very good condition can be cut virtually 4 angles FRAME ARM ROLLER DMNE 650/35 - CE certificate, - warranty and post-warranty service - new machine TECHNICAL PARAMETERS : ...

Category: 107: sheet metal working
New in: used
Price: used machinery auction RESALE 900 €
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 320 kg Dimensions (l x w x h) approx.: 1400 x 600 x 1300 mm Description: Segment-bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250 and 275mm. Sheet width 1020 mm Sheet thickness 2.5 mm Stand width 1050 mm Opening width mm Bending angle max. 135 ° Machine weight approx. 0.32 t Space required approx. 1.4 x 0.6 x 1.3 m

Category: 702: breadmaking and confectionery machines
approved
dealer
New in: 2008
Price: request quote
Location: Land-de DE 33647 Bielefeld, Artur-Ladebeck-Str. 171
Seller: Güzel Taceddin

Built in 2008/2009 With flour spreader Band length/host length 210 cm Width and angle can be adjusted easily Drivable on rolls with festipper 400V/50Hz

Category: 107: sheet metal working
New in: used
Price: used machinery auction RESALE 1.990 €
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 350 kg Dimensions (l x w x h) approx.: 1000 x 800 x 1200 mm Description: Notching machine with - Footswitch - Emergency stop switch Sheet thickness 4 mm Knife length 200 mm Angle adjustable from - to fixed 90 degrees Table surface 820 x 580 mm Machine weight approx. 0.35 t Dimensions LxWxH 1.0 x 0.8 x 1.2 m

Category: 104: grinding machines
New in: 2015
Price: request quote
Location: Land-de DE 49661 Cloppenburg, Emsteker Str. 127
Seller: SuS Schleiftechnik und Maschinenhandel GmbH

Description: Suitable to automatically grind the face and top on carbide tipped circular saw blades in one set-up. Permits to sharpen all known tooth geometries (flat tooth, alternate tooth, triple chip flat tooth, etc.) automatically and in one rotation. Specifications: 9 CNC controlled axes, Saw dia. without robot 500 - 1440 mm, sawblade centre bore dia. from 16 mm, sawblade thickness up to 15 mm, tooth pitch 6 - 180 mm, length of grind (length of carbide tip) up to 25 mm, rake angle from -35° to +20°, radial clearance angle from 0° to 25°, angular grind on the tooth face to 30°, angular grind on the tooth top to 45°, angular grind on the negative tooth face to 30°, tooth heigh ...

Category: 107: sheet metal working
New in: used
Price: used machinery auction RESALE 990 €
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 385 kg Dimensions (l x w x h) approx.: 1600 x 900 x 1000 mm Description: Segment-bending machine Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 250mm. Sheet width 1270 mm Sheet thickness 2.0 mm Stand width 1050 mm Opening width 48 mm Bending angle max. 135 °

Category: 109: other metal working machines
approved
dealer
New in: 1982
Price: request quote
Location: Land-at AT 4664 Laakirchen, Gewerbegebiet Süd 6
Seller: ZIEGLER Maschinen & Werkzeuge

-Table: 1000 mm -Table speed: 0-1 U/min (continuously free) -Working height: 970 mm -Table angle adjustable: Electric -Expense: 400 V -Mass BxHxT: 1000 x 970 x 1900 mm -Weight: About 900 kg

Category: 107: sheet metal working
New in: used
Price: used machinery auction RESALE 7.900 €
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 1800 kg Dimensions (l x w x h) approx.: 1500 x 1050 x 1400 mm Description: Profile bending machine with: - Foot pedal right / left - Recording: shaft 80mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device Round material solid 75 (800) mm Square material solid 60 (750) mm Angle steel 80 x 80 x 8 (800) mm T - steel bridge to the outside 100 x 11 (1000) mm Axis diameter 80 mm Working speed 6.0 m / min Tool diameter 242 mm Total power requirement 4 kW Machine weight approx. 1.8 t Space required approx. 1.5  ...

Category: 702: breadmaking and confectionery machines
approved
dealer
New in: 2014
Price: request quote
Location: Land-de DE 33647 Bielefeld, Artur-Ladebeck-Str. 171
Seller: Güzel Taceddin

For Kemper SP 150 A boiler Built in 2014 Hublast incl load unit, boiler car & contents 1200 kg Tipping angle about 40 ° 400 V/10A Dimensions: Tipping height 190 cm Height 282 cm Width: 144 cm Depth: 130 cm

Category: 105: saws
New in: used
Price: used machinery auction RESALE 1.195 €
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 240 kg Dimensions (l x w x h) approx.: 1380 x 580 x 930 mm Description: Demonstration system, unused. Cutting diameter 225 mm Saw blade dimensions 2480 x 27 x 0.9 mm Table height 935 mm Cutting speed 45 + 90 m / min Cutting performance at 90 ° around 225 mm Cutting performance at 45 ° around 145 mm Cutting performance at 60 ° around 90 mm Cutting area at 90 degrees: rectangular 150 x 245 mm Cutting area at 45 degrees: rectangle 190 x 150 mm Cutting area at 60 degrees: flat 120 x 90 mm Total power requirement 1,1 kW Machine weight approx. 0.24 t Dimensions LxWxH 1380 x 580 x 930 mm

Category: 105: saws
approved
dealer
New in: used
Price: request quote
Location: Land-de DE 94094 Rotthalmünster, Kaina 2
Seller: Maschinen Stumpf GmbH

Metal ribbon saw MEBA Type: 250 Cut range: At 90 ° Around 255 mm Quarter kant:255 x255 mm Rectangle: 450 x 160 or 415 x255 mm Billing-cut up to 45 ° with jaw adjustment Hydr. Cut control by hydr. Cylinder setting Infinite cut speed setting 0-70 M/min Ribbon sawing: 3800 x27x 0.9 mm Eccentric tension baking for material tension Equipment: Coolant pump + spare tape Dimensions. : Lg: 1.9m B: 950 mm H: 1.0 m Very good used condition in the warehouse-practicable

Category: 107: sheet metal working
New in: used
Price: used machinery auction RESALE 1.200 €
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 130 kg Dimensions (l x w x h) approx.: 700 x 500 x 1350 mm Description: Profile ring bending machine - Horizontal and vertical working is possible - 1 set of hardened standard rollers - under 2 rollers are driven - Operation manual - Foot switch left / right and EMERGENCY STOP Round material solid 30 mm Square material solid 30 mm Angle steel 40 x 40 x 5 mm T - steel bar to the outside 50 x 6 mm Axle diameter 30 mm Working speed 4 m / min Total power requirement 0.75 kW Machine weight approx. 0.13 t Space requirement approx. 0.7 x 0.5 x 1.35 m

Category: 105: saws
approved
dealer
New in: 1986
Price: request quote
Location: Land-de DE 94094 Rotthalmünster, Kaina 2
Seller: Maschinen Stumpf GmbH

Metal chalk saw MACC NTA 350 Operation (Manuell-Automaitic) Hydraulics-feed Manufacturer MACC Italy Type NTA 350 # 2925 Built: 10.1986 Fully automatic with small roller coaster, Saw blade through. 350 mm Saw hub adjustable-, feed hydraulics-. Adjustable Rotating sawhead left-right 45 ° with fine adjustment screws Cut range 90 ° Around to 100/120mm 45 ° 100/120 mm, Square 100x100, rectangle 170x100mm, at 45 ° rectangle 130x100mm, Material lifting path: A maximum of 500 mm detectable-prethrust hydr. + Multiple choice by-sliding function + counting plant Tension area of the screwstick 180mm, Speed range 25/50, Engine power: 3.3hp, Space required 1300x100 ...

Category: 212: peripheral equipment (e.g. heating, conveying, drying)
New in: used
Price: used machinery auction RESALE 5.300 €
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 2200 kg Dimensions (l x w x h) approx.: 6700 x 2000 x 725 mm Description: Heavy-duty trailer with - double steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - 50mm impregnated wood overlay. Capacity 10000 kg Length 5000 mm Width 2000 mm Height 725 mm Rear axle: steerable Front axle: steerable Tire dimensions 425/260 - 305 mm Machine weight approx. 2.2 t Space required approx. 6.7 x 2.0 x 0.725 mm

Category: 1403: other storage equipment
approved
dealer
New in: used
Price: request quote
Location: Land-de DE
Seller: Silo- und Förderanlagen H. Schüler

26 silos with drive-through ramp and the enclosure with steel racks are also for sale. Description of the silos: Contents: 15m³-50m³ of steel and GRP 10 GRP silos 3 x height about 7,000 mm, Ø 2,000 mm 5 x height about 5,000 mm, Ø 2,000 mm 2 x height about 7,000 mm, Ø 2,400 mm 16 steel silos 12 x quadrangle silo about 50m³ content 4 x Round Silo about 45m³ content For sell Price on request Phone + 49 172 8345457

Category: 107: sheet metal working
New in: used
Price: used machinery auction RESALE 299 €
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 100 kg Dimensions (l x w x h) approx.: 1170 x 400 x 580 mm Description: Folding Machine Bend length 915mm Sheet thickness max. 1,0mm Bending angle max. 135 degrees split upper tool: 25 - 50 - 75 - 200 - 2 x 300 mm. See pictures

Category: 2500: miscellaneous
New in: used
Price: request quote
Location: Land-de DE 64668 Hessen - Rimbach, Schloßstrasse 12
Seller: Werkzeugshop-Rimach

Petrol High pressure cleaner 6.5 hp 4.8 kWpetrol petrol engine steam emitter up to 210 barNEU OVPpetrol High pressure cleaner Tools is a powerful high-pressure cleaner, ideal for cleaning in the outdoor. With a maximum working pressure of up to 210 bar you can clean effortlessly Terrain, facades, driveways, sidewalks, machinery, tools, motor vehicles and much more. Thanks to the robust gas-powered 4-stroke engine with 6.5 hp power, you are independent of your power supply. The gasoline engine is started by rope train and has an oil shortage safety system to protect the engine. Depending on the type of application, the device has 4 pressure nozzles. The red nozzle produces a dot beam with ext ...

Category: 107: sheet metal working
New in: used
Price: used machinery auction RESALE 270 €
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 25 kg Dimensions (l x w x h) approx.: 900 x 250 x 300 mm Description: Flat iron bending machine Flat irons 100 x 5 mm Square steel 16 x 16 mm Round steel 18 mm Angle steel 100 x 8 mm Dimensions 0.9 x 0.25 x 0.3 m Weight 0,025 t without workbench

Category: 112: gear cutting and hobbing machines
approved
dealer
New in: 2001
Price: request quote
Location: Land-de DE 09456 Annaberg-Buchholz, Parkstr. 12
Seller: Gerd Seidler Werkzeugmaschinen

It is a very seltem machine – there are only 6 numbers on the market. It is getting to be used for manufacture for twin gearwheels in one single operation. New was € 850.000,00. max. module 3 max. workpiece diameter 150 mm smallest to mill number of teeth 4 ambient temperature +12°C...+40°C Relative humidity max 90% bei 20°C, max 50% Resolution accuracy 0,1° Milling head swivel spindle +/-45° Toolpiece table load 17 kN Shaping unit biggest width of teeth at spur gear 3 mm Max. helix angle 45° axisangleadjustment shaping spindle-workpiecetable -0,5°...3.000 DH/min feed rotation axe tool 10...9.420 mm/min feed radial axis machine stand 1...3750 mm/min  ...

Category: 104: grinding machines
New in: used
Price: used machinery auction RESALE 600 €
Location: Land-de DE Germany, 46342 Velen-Ramsdorf
Seller: Surplex GmbH

Weight approx.: 55 kg Dimensions (l x w x h) approx.: 500 x 400 x 400 mm Description: This tool grinding machine comes standard with: - Chisel grinding tool - Diamond grinding stone for HM. - White whetstone for HSS. - LED lighting - All adjustment tools. - Diamond conditioner for sharpening stone. C-5 collet set with the following sizes. 1.5 - 2 - 3 - 4 - 5 - 6 - 7 - 8 -9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22 - 23 - 24 - 25 - 26 - 27 - 28 - 29 - 30 mm. Dokumentation only in English Sanding range 1.5 - 30 mm Angle adjustable from - to horizontal 0-180 degrees Angle adjustable from - to vertical 0-45 degrees Angle adjustable from - to negative 0-52 degrees Connecte ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)