angle used for sale

: neu : ca. 8 Wochen ab Auftragse : Spanien : 47200 € : 958.16 € : 130 to : 600 mm : 5 : 2 : 50x18 mm : 80 mm : 600x18 (max. 600x20 mit D mm : 120x120x11 (max. 150x150x mm : 45/40 mm : 130x12 mm : 250x12 mm : 15 kW hydraulic drive 2 foot pedals for independant working on punching and section station bending unit with 2 dies, V50 and V90 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Transnorm belt curve conveyor right GKF 180°-1170-1000-IR1200 RA1964 Technical data: Conveying length middle radius (NL): 5341 mm Frame width (NB): 1170 mm Frame width with Bearing cover: 1290 mm Frame width with Bearing cover and gearbox: 1380 mm belt width (GuB): 1000 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 180° degrees middler conveying speed (v m/s): 1,4m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 3 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 1200 Nominal / outside width in mm: 1127 Belt width in mm: 1000 angle: 180° Driven: YES  ...

Furniture roller, furniture dog plastic rollers, furniture transport trolley, transport roller, platform trolley, transport trolley, heavy duty trolley, table trolley, assembly trolley, chassis with 2 angle frames -Manufacturer: VARIOfit, chassis with stainless steel attachment frame -Upper angle frame: removable, plate thickness 5 mm -Chassis: 2 swivel castors with brakes, 2 fixed castors -Load load: approx. 1200 kg -Total dimensions: 1510/900/H670 mm -Weight: 121 kg

sheet width: 3100 mm plate thickness: 4 mm distance between columns: 3170 mm back stop - adjustable: 650 mm down holder: 11 Stück cutting angle: 1,5 ° no. of strokes: 30 Hub/min table height: 750 mm total power requirement: 12 kW weight of the machine ca.: 4 t dimensions of machine L x W x H: 3,60 x 1,50 x 1,40 m Accessories: electr. back stop, angle front stop, table extensions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mm plate thickness: 16.0 mm thickness at Niro-steel: 10,0 mm blade length: 1300 mm cutting angle: 2-3 Grad no. of strokes: 13 Hub/min back stop - adjustable: 500 mm Control: konv. table height: 810 mm blade length: 1300 mm oil volume: 350 l engine output: 18.5 kW weight: 3900 kg range L-W-H: 2150 x 1200 x 1900 mm Machine from a maintenance workshop (!) Furnishing: - heavy / robust electro-hydraulic sheet metal plate shears - Machine body in a closed design as an all-steel welded construction - Knife upper cheek slides in a long downward direction over the knife edge .. protruding plastic guides - Cutting is done hydraulically via two hydraulic cylinders - The upper beam returns to its starting position in two ways .. Spring batteries on the side stands - manual back gauge, adjustable from the rear Adjustment by handwheel, with mm scale - hydraulic cutting angle adjust ...

Transnorm Curve Roll Track 180° 700-600 IR 1500 RA1222 The Transnorm Curve wheel conveyor is from 2005 and is in a very good (used) condition. Columns are not included in the scope of delivery. These are optionally available. Technical data: Manufacturer: Transnorm Type: TS 3215 Curve Roll Track 180° Built: 2005 Condition: very good (used) Angle: 180° Inner radius (IR): 1500 mm Nominal/outer width (NB): 700 mm Usable width (NUB): 600 mm Weight: 200 kg Scope of delivery: without supports (if necessary please enquiries) Optional: supports Priceplus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoicing with advance payment Delivery time: approx. 3 - 5 working days after receipt of payment Features: Construction year: 2005 condition: very good (used) Nominal / inner radius in mm: 1500 Nominal / outside width in mm: 700 Roll width in mm: 600 angl ...

WTT 180° degree roller cam 640-600 IR500 RA1803 Technical data: Framework width (NB): 640 mm Roll width (EL): 600 mm Roller pitch: 5:6 Rolls: 50mm, galvanized pitch (Tlg): 105 mm Conveying angle: 180° degrees Inner radius (IR): 500mm Overall height (BH): 80mm top edge of rollers Side guide outside: 185mm Drive: without Supports: without Construction: frame painted gray, rollers galvanized Optionally available: Supports: 70,00 Euro plus VAT / piece All prices plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Nominal / inner radius in mm: 500 Nominal / outside width in mm: 640 Roll width in mm: 600 (Nutzbreite) angle: 180° Driven: NO scope of delivery: without supports For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning ...

Transnorm curved belt conveyor right bend 45°-800-700 IR900 RA2140 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 45° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DRS71S4/MM05/LN Electrical Data: 380-500 V, 0,55 kW Conveying speed: Frequency converter for stepless speed control Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 45° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: freely adjusta ...

Transnorm spiral helix belt curve conveyor left 90°-800-700 IR900 RA2141 Technical data: Frame width (NB): 800 mm belt width (GuB): 700 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 90° degrees decline: 200 mm / 90° = 800 mm / 360° support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor SA37/T DRS71S4BE05/MM05/LN Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 (wear see pictures) Year of construction: 2014 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2014 condition: good (used) Driven: YES Nominal / inner radius in mm: 900 Engine type: SEW Eurodrive angle: 90° scope of delivery: including Movimot frequency converter Co ...

max. grinding diameter: 260 mm grinding length: 500 mm workpiece length: 500 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Very well preserved universal tool grinding machine in particular suitable for all types of cutting tools. Workspace: Center height above table 115 mm Center width 720 mm Largest grinding diameter 260 mm Maximum grinding length 500 mm Largest clamping diameter 260 mm Maximum clamping length 500 mm Table: Clamping surface 1120 x 112 mm Largest longitudinal movement 520 mm Adjustability across 270 mm Adjustability vertically 300 mm Can be swiveled to 2 sides by 180° each Grinding spindle: The spindle head can be swiveled 360° Min./max. Distance from the center of the grinding spindle to the top edge of the table 70 / 370 mm Can be swiveled to a twist angle of 60°-0°-60° Can be swiveled to a clearance angle of 15°-0° ...

Pneumatic swivel actuator, double-acting FESTO DSR-25-180-P 11911 Operating pressure: 2 - 8 bar adjustment range Swivel angle: 0 - 180 ° swivel angle: 0 - 180 ° Shaft diameter: Ø 12 mm Wavelength: 30 mm Groove width: 4 mm 1x Position sensor: IFM IE5090 IEB3001-BPKG/US approx. 0.0. 5 m cable with plug used, checked! Dimensions: 140 x 100 x 95 mm

Pneumatic swivel actuator, double-acting FESTO DSR-16-180-P 11910 operating pressure: 2 - 8 bar adjustment range swivel angle: 0 - 1 80 ° Swivel angle: 0 - 180 ° Shaft diameter: Ø 10 mm Wavelength: 23 mm Groove width: 3 mm used, tested ! Dimensions: 78 x 77 x 70 mm

elumatec SBZ 122/75 - 5-axis profile machining center High-performance centre for the machining of aluminium, plastic and thin-walled steel profiles with the profile bar at rest to protect the profile surface. - Infinitely variable A-axis from -120° to +120° - Infinitely variable C-axis positionable from -220° to +220° - All five axes can be moved simultaneously via RTCP (Rotation Tool Centerpoint) - Due to the additional C-axis, frontal processing from the left and right is possible - Tapping without compensating chuck - 6 horizontal pneumatic material clamping devices - Linear guides for clamp displacement, autonomous - Collision avoidance due to automatic tensioner detection and positioning - Automatic tool changer with twelve tool storage locations - incl. saw blade 180 mm - Year of construction: 2020 Specification - Max. machining length: 4000 mm - Travel X/ ...

pressure: 150 t chamfer lenght: 4100 mm stroke: max. 315 mm Control: Cybelec ModEva15T pressing speed: 1 --> 10 mm/sec closing speed: max. 200 mm/sec Stop Time max.: 110 mS compressed air: max 8 bar total power requirement: kW weight of the machine ca.: 13,2 t - Automatic bounce compensation - Hydraulic crowning of the lower beam - Table with hydraulic die clamping - 2 pieces of aluminum support arms with 3 grooves including stainless scale and Angle stop - hydraulic ram clamping type RF-A” - Hydraulic unit for punch and die clamping - Lifting and installation height increase by 100 mm - Roller conveyor guide on the front of the lower beam for front support arms - 2 pieces of H-axes manually with handwheel (height adjustment of the front Support arms over 200 mm, the weight is balanced by gas springs) - 2 pieces of hydraulic bending aids - 1st and 2nd measuring point for the Mini-Rotax ...

Transnorm curved belt conveyor right 150°-780-600-IR600 RA2002 Technical data: Manufacturer: Transnorm Year of manufacture: 1996 Condition: good (used) Motor: will be changed conveying angle: 150° nominal/external width (NB): 780 mm belt width (GB): 600 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: kW 0.55 230/400 V 50Hz Conveying speed: please contact Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1996 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 780 Belt width in mm: 600 angle: 150° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,55/S1 scope of del ...

Transnorm belt curve conveyor left 90°-1000-800-IR900 RA2001 Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor Stand width (NB): 1000 mm Belt width (GuB): 800 mm Motor width (MB): +200 mm overall height (BH): 210 mm inner radius (IR): 900 mm Conveying angle: 90° degrees Conveying speed: Please contact Drive: SEW gear motor with Movi-Mot Electrical data: 50Hz V230/400, kW 0,37 /S1 Year of construction: 1992 Included: Side guide on both sides and frame Optionally available: Suppo ...

FAS conveyor roller curve 90° 635-500 IR850 RA1990 Technical data: Condition: good (used) Engine: fully functional Angle: 90° Inner radius (IR): 850 mm Nominal/outer width (NB): 635 mm roller width (NUB): 500 mm Pitch: 75-125 mm Motor Type: SEW three-phase motor Engine power: kW 0.15 S1 Hz 50 Funding speed: 0.93 m/sec Drive: Center drive usable width: 500mm The rolls are higher than the frame Scope of delivery: without supports (if necessary please enquiries) Optional: supports Price: plus VAT from central warehouse Dr. Sonntag KG 97076 Wuerzburg Features: nominal voltage: 380-500V Running direction: links/ rechts condition: good (used) Nominal / inner radius in mm: 850 Nominal / outside width in mm: 635 Roll width in mm: 500 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,15 Conveyor speed m / s: 0,93 scope of delivery: without supports and side guides Für eine  ...

KALTENBACH KKS 400 NA automatic circular sawing machine built in Germany is used for the precise, fully automatic cutting of flat bars, angle bars, profiles and tubes. The machine uses a reliable drive with hardened and ground helical gears, which, in combination with the electronic cutting height adjustment and the fast reverse movement of the cutting disc, ensures smooth operation and short cutting times, even during the most demanding processing. A large workspace with a clamping element stiffens the material during cutting, ensuring that the workpiece is held firmly and securely on both sides of the 400 mm diameter blade. The KALTENBACH circular sawing machine is offered with, among others, a material feeder, chip conveyor and convenient to use PLC control. Technical data of the KALTENBACH KKS 400 NA circular sawing machine - PLC control - machinable materials: steel, stainless ...

Transnorm belt curve conveyor left GKF 180°-775-600 IR500 RA2013 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and Side guides are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Type designation: Belt curve conveyor TS 1600-105 Frame width (NB): 775 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 500 mm Conveying angle: 180° degrees support feet ...

Transnorm incline belt fall belt with flap passage belt conveyor (4980+1140+640)-600-500 RA2036 Manufacturer: Transnorm Year of manufacture: 2009 Condition: good (used) Motor: fully functional conveyor length (FL): 6760 mm (4980 mm straigt pice, 1140 mm Angle and 640 mm passage) nominal / external width (NB): 600 mm belt width (GB): 500 mm frame high (BH): 85 mm, 280 mm including the motor Motor type: SEW gear motor Motor power: 380-415V Conveyor speed: 0,442 m/s Angle: approx. 13.3° adjustable Delivery: without supports (if needed please ask) Optional: supports Price plus VAT central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2009 condition: good (used) Conveying length in mm: 6760 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: 0,442 scope of delivery: without supports and side ...

Transnorm Belt Curve Conveyor left GKF 90°-780-600 IR600 both sides transmission RA2019 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 780 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 90° degrees support feet: optionally available Conveying speed  ...

Transnorm curved belt conveyor left 150°-780-600-IR600 RA2017 Technical data: Manufacturer: Transnorm Year of manufacture: 1996 Condition: good (used) conveying angle: 150° nominal/external width (NB): 780 mm belt width (GB): 600 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor Motor power: will be changed Conveying speed: please contact Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1996 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 780 Belt width in mm: 600 angle: 150° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,55/S1 scope of delivery: without supports and sid ...

Transnorm spiral helix belt curve conveyor right GKF 90°-775-600 IR500 RA2009 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Type designation: Belt curve conveyor TS 1600-105 Frame width (NB): 775 mm belt width (GuB): 600 mm height (BH): 210 mm Inner radius (IR): 500 mm Conveying angle: 90° degrees Incline: 210 ...

Transnorm belt curve conveyor left 90°-750-550-IR900 RA2007 Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm height including motor (MH): 480 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V230/400, kW 0.55 / S1 Belt:KT58, will be changed Year of construction: 1997 Optionally available: Supports Side guide one and both sides frequency inverter Prices net plus V ...

Transnorm curved belt conveyor left 65°-780-600-IR600 RA2000 Technical data: Manufacturer: Transnorm Year of manufacture: 1990 Condition: good (used) Motor: fully functional conveying angle: 65 nominal/external width (NB): 780 mm belt width (GB): 600 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 510 mm Motor type: SEW gear motor Motor power: kW 0.55 230/400 V 50Hz Conveying speed: please contact Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1990 condition: gut Nominal / inner radius in mm: 600 Nominal / outside width in mm: 780 Belt width in mm: 600 angle: 65 Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,55/S1 scope of delivery: ...

Transnorm belt curve conveyor left 90°-700-500-IR900 RA1967 Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Conveying length middle radius (NL): 1806 mm Frame width (NB): 700 mm belt width (GuB): 500 mm height (BH): 220 mm height including motor (MH): 480 mm Inner radius (IR): 900 mm Conveying angle: 90° degrees Conveying speed (v m/s) Drive: SEW gear motor Electrical data: 50Hz V230/400, kW 0.37 / S1 Belt:KT58, wear see pictures Year of construction: 1997 Optionally available: Supports Side guide one and both sides fr ...

Transnorm belt curve conveyor left GKF 30°-750-550 IR900 RA1404 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Fram ...

Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Fra ...

sheet width: 3100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm cutting angle: 2,0 ° no. of strokes: 15 Hub/min back stop - adjustable: max. 1000 mm down holder: 14 Stück work height max.: 865 mm Column width: 3515 mm throat: 50.0 mm Control: D-Touch 7 oil volume: 200 l engine output: 15.0 kW voltage: 400 V weight: 7.650 kg range L-W-H: 4110 x 2200 x 2100 mm from a maintenance workshop (vehicle construction) maintained condition () New price ~ 41.000 euros Special price on request Furnishing: - robust electro-hydraulic sheet metal shears - CNC control unit D-Touch 7 control (touchscreen) Anti-reflective, robust 7 color touch screen control panel easy positioning to the desired size Positioning accuracy 0.1 mm unlimited material definition in the material library Intuitive menu navigation Separate display for actual and target value Clearance function of the back ...

Transnorm belt curve conveyor 90° helix spiral left 980-800 IR600 RA2044 Technical data Manufacturer: Transnorm Type: Belt curve 90° left Year of manufacture: 1995 angle: 90 running direction: left inner radius (IR): 600 mm useful width (NUB): 800 mm nominal/external width (NB): 980 mm Pitch: 180 mm/ 90°, 720 mm/ 360° Conveying speed (m/s): with frequency converter freely adjustable between 0.0117 and 0.5167Electrical data: 1.5 kW / S1, 380-500 V Scope of delivery: without supports and side guides (please inquire if required) including frequency converter new belt optional: supports side guides Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: condition: very good (used) scope of delivery: including Movimot frequency converter, inklusive neuem Gurt, without supports and side guides Driven: YES Nominal / inner radius in mm: 600 angle: 90° Belt width in mm: ...

Transnorm angled infeed outfeed rejector inlet roller conveyor 45°/90°-600-500 RA2033 Year of manufacture: 1995 discharge angle: 45° + 45° curve Nominal/external width (NB): 600 mm Useful width (NUB): 500 mm Conveyor speed: 0,68 m/s Roller diameter: 50 mm steel + conical plastic coated rollers Drive: SEW gear motor with brake Electrical data: 0,37 kW, 380-480 V center distance: 75 mm Height: 120 mm, 375 with motor Optionally available: Supports Side guide one-sided and both-sided Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) angle: 45°, 90° Construction year: 1995 nominal voltage: 380-480 V Nominal / outside width in mm: 600 Roll width in mm: 500 Roll division in mm: 75 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,68 scope of delivery: without supports and side guides For ...

Transnorm spiral helix belt curve conveyor left 90°-775-600 IR600 RA2008 The Transnorm belt curve conveyor is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included. These are optionally available on request. Belt curves are frequently used in intralogistics for the internal transport of unit loads and are an indispensable part of modern distribution centers. Transnorm belt curves impress with performance and reliability. Thanks to a low-tension drive, over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the smoothest possible running. Technical data: Type designation: belt curve conveyor TS 1600-105 frame width (NB): 775 mm belt width (GuB): 600 mm overall height (BH): 210 mm inner radius (IR): 600 mm Conveying angle: 90° degrees (coiled 191mm rising ...

MOSCA alignment conveyor inclined roller conveyor 2010-610-535 RA2031 Make: MOSCA Year of manufacture: 2008 Roller width (RB): 535 mm Nominal/outer width (NB): 610 mm Length: 2010 mm Diameter rollers: 50 mm Distance between rollers: 60 mm Roller conveyor motor: NORD drive motor with frequency converter frame height set: 840 Conveyor speed: freely adjustable with frequency converter between 0,3 m/s and 0,83 m/s Angle rollers: 6.4° Optional: Logo control Side guide adapted conveyor speed range Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2008 condition: gut nominal voltage: 230 angle: 6,4° Conveying length in mm: 2010 Nominal / outside width in mm: 610 Roll width in mm: 535 Roll division in mm: 60 Driven: YES Engine type: Nord Conveyor speed m / s: 0,3 - 0,83 scope of delivery: inklusive Frequenzumrichter, including supports  ...

Key data: 46 °, 3200 mm, 1000 mm

sliding table saw Altendorf F45 ELMO III Electromotive height and swivel adjustment Saw blade swivel + 46° to - 46° On-screen control with 12" touchscreen Double trolley 3200 mm Motor 5.5 kW VARIO infinitely variable speed control 2000 - 6000 rpm Saw blade diameter max. 500 mm Cutting height max. 175 mm Cutting width at rip fence 1000 mm Control panel at eye level with document holder 2-axis scoring unit with electric. Height and side adjustment Scoring blade height programmable with quick lowering & Quick lift, motor 0.75 kW, 8200 rpm. LED illumination when the scoring machine is switched on Table extension 840 mm Angle stop with manual adjustment, lengths up to 3500 mm Angle adjustment 0-49° Duplex stop 1350 mm

Year: 2018 - technically efficient - cutting length: 6000mm - discs: 550 mm - E580 control - digital angle indicator - pneumatic angle adjustment 45-90 degrees - cut according to the external dimension, without correction - cooling installation - vertical pneumatic clamps - automatically lowered and raised shield shields - sawdust extraction - label printer

Specifications: Tool holder: SK 40 Travel X/Y/Z: 700 / 500 / 500 mm Speed range: 63 - 3150 1/min Spindle stroke: 100 mm Feeds: X,Y axis 16 - 800 mm/rev; Z-axis 8 - 400 mm/rev Rapid traverse: X,Y axis 3000 mm/rev; Z-axis 1500 mm/rev Angle table size: 900 x 500 mm Motor power: 12 kVA Connection: 400 V Weight, approx.: 2550 kg Dimensions (WxDxH), approx.: 1770 x 1880 x 2158 mm Equipment: - 3-axis digital display, Fagor - Rigid angle table - Machine lamp - Emergency stop push button - Operating tool - Machine shoes

Wheel diameter - max. 320 mm Wheel width 50 mm Module - max. 7.5 Module - min. 2.1 Total power requirement 13 kW Machine weight approx. 7 t Space requirement approx. 1.7 x 1.9 x 2.7 m Tooth width max. 50 mm Adjustment range for hypoid wheels (offset) +/- 60 mm. Through-hole spindle pieces 78 mm. Dive max 20 mm. Cut feeds, infinitely variable 0.04 - 25 mm/min. Distance between taper tip/workpiece spindle... 100 - 345 mm. Distance between the centre of the cone and the cutter head axis 25 - 150 mm. Distance between the center of the taper and the milling head spindle... 80 - 220 mm. Max. ring wheel Ø at medium spiral angle... 320 mm. Max. gear ratio 1 : 9.5 Module 2.1 - 7.5 Outer cone spacing approx. 170 mm. Rapid traverse 1.5 m/min. Roll feeds in minutes of angle... 0,3 - 20 Spindle nose with short taper, inside 140 mm. Spindle nose with short taper, external 85 m ...

IRON WORKER (Universal Punching Shear) (Punching capacity) Punching capacity 70 Tons Diameter 28 x 20mm Thickness (Diameter 28 x 20mm thickness) Max cutting thickness in plate 20mm (Max cutting thickness in plate 20mm) Angle cutting up to 130x130x130x13 at 90°. Angle cutting up to 70x70x7 at 45°.

Gebhardt roller curve conveyor 2 x 90° LINKS 610-500-300 with straight frame RA1210 The Gebhardt wheel curves with straight gear are from 2007 and are in a good (used) condition. It has a central engine of the SEW brand. Columns are not included in the scope of delivery. These are optionally available on request. Technical data: Manufacturer: Gebhardt Type: 1070.113 Built: 2007 Condition: good (used) Engine: fully functional Angle: 2 x 90° with straight frame Outer width: 610 mm Clamping length: 500 mm Length straight line: 300 mm Rolls Type: G6/50 sliding bearing with conical plastic Molding Power rating: 30 kg/m Engine Type: SEW Gear Motor Engine Power: kW 0.37/S1 Hz 50 A 2/1.15 Conveyor speed: 0.35 m/s Weight: 110 kg Scope of delivery: without supports (if necessary please enquiries) Price plus VAT from central warehouse Dr. Sonntag KG 97076 Würzburg Payment: after invoic ...

boom circular saw Fezer ABS 550 Motor unit can be swivelled horizontally and vertically Motor power 5.5 kW max. tool diameter 550 mm Saw blade extension 800 mm Suitable for the following work: Cut-to-length cuts, max. cutting height 198 mm Mitre angle cuts 0° - 90° Longitudinal trimming cuts max. cutting height 95 mm Bevel cuts Double-angle cuts Milling Machine in GOOD CONDITION Ex location carpentry NET € 1.200,00

Transnorm roller conveyor ejector GF 2500-700-685 RA2212 Make: Transnorm Roller width (RB): 685 mm, Steel rolls Nominal/outer width (NB): 700 mm Rolls diameter: 50 mm length: 1800 mm, 2500 mm or 3180 mm (double) Overall height frame: 250 ejector angle: 45°, left 3 rows ejector pneumatic controllable Motor MOVI-Mot 300-500V 1,75kW Conveyor speed: freely adjustable with frequency converter Scope of delivery: without supports (please enquire if required) Prices net plus VAT. ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2014 Roll division in mm: 65 scope of delivery: inklusive Frequenzumrichter, without supports KW: 1,5/S1 Electric data: 380-500 Bauhöhe in mm (BH): 250 Roll width in mm: 685 angle: 45° Links Conveying length in mm (NL): 1800, 2500, 3180 Frame width in mm (NB): 700 For individual, professional advice, simply contact us. Simp ...

Suitable for automatic grinding of HM circular saw blades on the chest and back in one setting. All known Tooth geometries (flat, alternate, trapezoidal, etc.) can be machined automatically and in one run. Accesories : Handling system for saw blades type ND 230 incl. data input station and 7 loading carriages,, Total enclosure,, Coolant system,, Alphanumeric slide-in keyboard for data management,, Automatic central lubrication,, Stepless variable grinding spindle drive,, Automatic fire extinguishing system,, Automatic grinding wheel measuring and compensation device, Mist extractor N182,, Oil collecting pans,, Machine lamp,, 1 sawblade holder,, 1 grinding wheel mount., Circular saw blade diameter without robot: 80-840mm, Circular saw blade diameter with robot: 100 - 630mm, Circular Saw Bore Diameter: with robot from 10 -180 mm, Sheet thickness without robots: up to 14 mm, Sheet thickness ...

Transnorm curved belt conveyor left bend 90°-800-700 IR900 RA2116 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 90° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DT71D4/TH Electrical Data: 380-500 V, 0,37 kW Conveying speed: 0,67 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,67 scope of ...

Transnorm curved belt conveyor left bend 90°-800-700 IR900 RA2117 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 90° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DT71D4/TH Electrical Data: 380-500 V, 0,37 kW Conveying speed: 0,67 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2014 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 90° Driven: YES Running direction: LINKS Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,67 scope of ...

Transnorm curved belt conveyor right bend 90°-800-700 IR900 RA2118 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 90° nominal/external width (NB): 800 mm belt width (GB): 700 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DT71D4/TH Electrical Data: 380-500 V, 0,37 kW Conveying speed: 0,67 m/s Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2015 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 800 Belt width in mm: 700 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: 0,67 scope o ...

Transnorm belt curve conveyor 90° right GKF 90°-800-600 IR600 RA2218 Technical data: Type designation: Belt curve conveyor TS 1600-105 Frame width (NB): 800 mm Belt width (GuB): 600 mm Overall height (BH): 210 mm Inner radius (IR): 600 mm Conveying angle: 90° degrees Conveying speed (v m/s): 0.5 Drive: SEW geared motor R17 DT71D4 Electrical data: 50Hz V380-500, kW 0.37 / S1 Belt: double-ply, green, smooth Year of construction: 2001 The position of the motor may differ from the photos (inside / outside / below). Please specify if it is relevant for you. Optionally available: Supports Side guides with Frequency inverter adjustable up and down Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 600 Nominal / outside width in mm: 800 Belt width in mm: 600 angle: 90° Driv ...

sheet width: 3050 mm plate thickness: 6.0 mm cutting angle: 0.5 - 3.0 ° down holder: 18 Stück no. of strokes: 9 / 14 Hub/min back stop - adjustable: 750 mm Control: SC7p engine output: 10.0 kW weight: 4800 kg range L-W-H: 3750 x 1600 x 2450 mm from a maintenance workshop well maintained condition - checked annually () Furnishing: - electro-hydraulic sheet metal shears - backdrop-guided - ATLANTIC NC control unit - model SC7p Target / actual information about the motorized back gauge Manual positioning possible via handwheel Digital display for backgauge position electro-hydraulic cutting angle adjustment Adjustable retraction from the back gauge before the start of the cut Front left control unit - electro-motorized back gauge 10-750 mm - manual cutting gap adjustment, from the rear - 1x front side stop, with mm scale - 3x front support arms - 1x freely movable foot switch - Fi ...

Transnorm curved roller conveyor 180°-900-800 IR800 RA2233 Technical data: Manufacturer: Transnorm Type: TS 2712 curved 180° Built: 2001 Condition: good (used) Engine: fully functional Angle: 180° Inner radius RN: 800 mm (nominal radius) Outer width: 900 mm Clamping length: 800 mm Engine Type: SEW Gear Motor, R17DT71D4/TH Engine Power: V 380-500, kW 0.37 Drive: chain drive Conveyor speed: contact us Weight: 260 kg Scope of delivery: without supports Optionally available: Supports Lateral guide on one and both sides Frequency inverter for stepless speed change Length adjustment (longer/shorter) Other roller conveyors/roller curves with chain transmission Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 800 Nominal / outside width in mm: 900 Roll width in mm:  ...

5-axis machining centre with 10-fold tool changer for aluminium or PVC profiles Max. machining length: 12,000 mm Y-axis travel: 1000 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm Weight: approx. 11,000 kg Minimum Quantity Spraying Tensioner detection and automatic displacement 20 pneumatic material clamps Pendulum operation through two light barrier areas Handheld control panel Conveyor belt Lots of tool holders, including saw blade Loading is included in the price The machine is already dismantled in our warehouse. Function video can be sent. The spindle was overhauled by the manufacturer (cost over 15,000 €)

Transnorm belt curve conveyor 90°-900-800 IR900 right RA2235 Technical data: Manufacturer: Transnorm Condition: good (used) Conveying angle: 90° Nominal/outer width (NB): 900 mm Belt width (GB): 800 mm Inner radius (IR): 900 mm Overall height (BH): 210 mm Motor height (MH): 450 mm Motor type: SEW geared motor Electrical data: 380-500 V, 0.55 kW Conveying speed: please contact us Position of the motor may differ from the photos depending on stock. If relevant, please specify Scope of delivery: without supports (please enquire if required) Optional: Supports Side guides Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1992 condition: good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 900 Belt width in mm: 800 angle: 90° Driven: YES Running direct ...