angle used for sale

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate -Dimensions: 153/76/H132 mm -Weight: 6 kg

Grinding machine, angle grinder, turning steel grinding machine, thread drill grinding machine, milling cutter grinding machine -Angle adjustment -Grinding device -Disc: Ø 190 mm -Drive: 0.2 kW -Speed: 2800 rpm -Dimensions: 700/700/H1400 mm -Weight: 275 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping, 2 pieces -Table surface: 380 x 310 mm, height 785 mm -Wall thickness: 70 mm -Groove width: 28 mm -Groove spacing: 160 mm -Price/tax: complete -Dimensions: 380/310/H785 mm each -Weight: 124 kg/pc.

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, V-block -V-block: for marking plate, clamping plate, straightening bench... -Prism width: 73 mm 115° -Dimensions: see photo techn. drawing -Dimensions: 150/84/H50 mm -Weight: 3.6 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, V-block -V-block: for marking plate, clamping plate, straightening bench... -Prism width: 50 mm 75° -Dimensions: see photo techn. drawing -Dimensions: 118/71/H45 mm -Weight: 2.2 kg

Reinforcing steel bending machine, shaft bending machine, round steel bending machine -max bending capacity: Ø 32 mm -Drive: 1.3/2.1 kW -Bending angle: Pin-controlled, two-speed, each with pins for left/right to set the angle -Equipment: adjustable counterholder strips, standard bending tool -Dimensions: 750/660/H970 mm -Weight: 356 kg

Threaded fitting, malleable cast iron thread fitting, elbow fitting, pipe angle fitting, pipe angle, threaded fitting, malleable cast iron threaded fitting -Manufacturer: Sanha, malleable iron threaded fitting elbow fitting 89 pieces -Size: 90° 1 1/2 -Order No.:. 12979-1 Art. 97 -Price: complete -Total weight: 134 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Prism block: for marking plate, clamping plate, straightening bench ... -Prism width: 100 mm -Dimensions: see photo techn. drawing -Dimensions: 250/120/H63 mm -Weight: 10 kg

Angle grinder, cutoff grinder, angle polisher -Power: 500 W -Speed: 2000 rpm -Diameter: up to 120 mm -Price: per piece -Number: 2 pieces -Dimensions: 360/110/H200 mm -Weight: 3.2 kg/piece

Universal milling head, milling adapter, milling extension, angle milling head, electronic spindle -Spare part comes: from a machining center BJM type ALBZ-145 -Number: 1 piece angle milling head -Recording output: HSK -Milling head: completely rotatable/pivotable -Transport dimensions: 1080/380/H435 mm -Weight: 246 kg

pneumatic angle grinder, flex, grinding witch, cut-off grinder, cut-off machine, angle grinder -pneumatic straight screwdriver -Operating pressure: 6 bar -Speed: 900 rpm -Price: per piece -Number: 2 pieces -Dimensions: 380/42/H67 mm -Weight: 1.4 kg/piece

Universal milling head, milling adapter, milling extension, angle milling head -Spare part of a: WMW HECKERT milling machine -Number: 1 piece angle milling head -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Rezes recording: mm -Pitch circle: mm -Transport dimensions: 750/600/H530 mm -Weight: 296 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate -2x prisms: as a set -Price: for one set -Dimensions: 130/75/H150 mm -Weight: 10 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate, alignment bench ... -Prism width: 90 mm -Dimensions: 105/110/H68 mm -Weight: 3.1 kg

Marking prism, testing prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: marking plate, clamping plate, straightening bench... -Prism width: - mm -Quantity: 2x individual prisms available (cannot be used as a set) -Price per piece -Dimensions: 1x 130/150/H75 mm 1x 100/120/H60 mm -Weight: 5kg/piece

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate, alignment bench ... -Prism width: - mm -Dimensions: 210/85/H225 mm -Weight: 10 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate, alignment bench ... -Prism width: 30 mm -Number: 5x prisms -Price: complete -5x dimensions: 170/85/H235 mm -Weight: 50 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate -Prism size: 24/70 mm -Dimensions: 80/54/H100 mm -Weight: 2.6 kg

Swivel drive, pneumatic cylinder, wing drive, swivel module -Type: DMSI - Angle measuring system: integrated -Swivel angle: 0° - 270° -Number: 1x available -Price: per piece -Dimensions: 110/110/H270 mm -Weight: 9 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate, alignment bench ... -Number: 1x prism -Price: complete -Dimensions: 210/85/H226 mm -Weight: 14 kg

Marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube -for: scribing plate, clamping plate, ... -Number: 2x prisms -Price: complete -2x dimensions: 100/68/H89 mm -Weight: 8.4 kg

Grinding machine, angle grinder, turning steel grinding machine, thread drill grinding machine, milling cutter grinding machine -Angle adjustment -Grinding device -Disc: Ø 150 mm -Drive: 0.5 kW -Speed: 2800 rpm -Magnetic plate: 250 x 100 mm -Grinding length: 290 mm -Dimensions: 1050/800/H1600 mm -Weight: 294 kg

Anthon panel sizing saw, year of construction 2000/01 Type Porta composed of: Roller conveyor, Longitudinal saw, Chipper left/right, Angle transfer, Parcel pusher, Drawer arms, Pusher tracks, Transfer table, Cross saws, Chipper left, Angle transfer, Roller conveyor Grenzebach Plattenstapeanlage Year of construction 1990/91 composed of: Roller conveyor, scissor lift, storage device, stacking device, chain conveyor on lifting platform, scissor lift, pallet insertion device, tongs transfer swivel device, chain conveyor, weighing device Waste disposal plant Holtec Vibrating Conveyor DS 500 - 11m Gössling Flat Belt Conveyors with Carriers Diemer ASC 50-25 LP-S, belt conveyor DB-A, secondary shredder DNZ 100-100

sheet width: 4050 mm plate thickness: 6,35 mm weight of the machine ca.: 6,5 t distance between columns: mm total power requirement: kW dimensions of the machine ca.: m motorized arrester behind cutting angle adjustment Technische Daten / technical details: Schnittleistung / max. cutting capacity 6,35 mm max. Schnittlänge / max. cutting length 4050 mm Schnittwinkel / cutting angle 0,5-2,3 ° Anschlag / limit stop 750 mm Anschlußwert / power 7,5 kW Gewicht der Maschine / weight 6500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5-axis machining centre with tool changer for aluminium or PVC profiles Max. machining length: 15,000 mm Y-axis travel: 1150 mm Z-axis travel: 715 mm Swivel angle A-axis: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Minimum Quantity Spraying Tensioner detection and automatic displacement 16 pneumatic material clamps Pendulum operation through two light barrier areas Handheld control panel Num calculator has been updated to Windows 10 control Spindle has been completely overhauled by the manufacturer (6-month warranty) Loading is included in the price, machine is dismantled in our warehouse Weight: approx. 14,500 kg

3000 B CNC circular saw blade grinding machine was built in 2023 in Poland. The brand-new machine, equipped with intuitive software and a CNC controller with memory for 128 programmes, is used to sharpen the following types of circular saws, mainly used in the furniture industry for cutting laminated chipboard: – flat circular saws (GM) – alternately mitre circular saws (GS) – trapezoidal circular saws (GB) – trapezoidal-flat circular saws (GA) The 3000 B CNC circular saw sharpener allows for grinding tooth rake angles and tooth face angles in a single pass without removing the saw blade. The grinding wheel arrives at the tooth plane at two feed speeds – the slower feed increases grinding precision, while the faster one reduces sharpening time by up to half. To ensure precise feeding of the tooth under the grinding wheel, a claw feeder is used, which prevents the grindin ...

WEINIG Rondamat R 912 S/N 912-497, YOC 1995 – Ref.-No. 119130 – fully automatic tool grinding machine • Automatic resharpening of straight planer knives in the cutter head with conventional or hydro clamping • Automatic resharpening of milling cutters in the hydraulic planer head (in front of the chest) • Automatic divider for up to 36 cutting edges • Concentricity tolerance below 0.005 mm • Integrated coolant device • Table feed infinitely variable (forward / return) • Easy operation via membrane keypad and digital displays Specifications • Abrasive mandrel D=50 mm • Planer head diameter min. 80 mm to max. 280 mm • Grinding length max. 260 mm • Table stroke 500 mm • Programmable number of knives from 2 – 36 • Programmable grinding circuits per tool 1-9 • Free-angle infinitely adjustable 15° – 35° • Axis angle max. 15° • Gr ...

For sale is a semi-automatic two-column band saw machine SILOMA OL 500/800 DGH. Manufacturer: BULGARIA. Two-post rotating frame, manual workpiece feed, hydraulic workpiece clamp, hydraulic saw frame feed, manual saw tension, hydraulic saw feed, adjustable cutting force, frequency control of cutting speed, digital cutting angle indication, easy cutting angle adjustment. Designed for cutting profiles and solid workpieces made of steel, non-ferrous and light metals at angles of -30/+45 degrees. If necessary, we will help with logistics.

German mechanical sheet metal bending machine The bending machine allows you to bend sheets with a width of 3000mm and a thickness of 6mm. It is controlled by a foot pedal and a touch panel, electronic settings of the bending angle, the ability to enter programs for the movement of the bumper and the bending angle, the ability to work in automatic cycles. Equipped with an electro-mechanical backgauge device with digital position value setting. Technical data: - Bending length: 3000 mm - Maximum thickness of the bent sheet: 6 mm - External dimensions of the folding machine (L x W x H): 4550 x 950 x 1850 mm - Machine weight: 8900 kg . Equipment : - Touch control panel. - Control pedal. - Electro-mechanical rear stop device with digital position value setting. - Additional new bending bars. - DTR manual.

Salvagnini P4-2220 CNC Panel Bending Machine elements : TL27155C: Scissor table ADP2715: Feeder-destacker for operation in line P4-2220: Panel Bender SP22: Option for removing profiles SAP2220.POS: Panel unloader/accumulator TAE51: Water-air cooler SPA: Work surfaces with brushes T: Mover for auxiliary tools CLA: Auxiliary bending tool command for positive bends Max dimension of the sheets to be loaded 2700 x 1524 mm Max height of the pack to be loaded, including pallet 375 mm Carrying capacity 5000 kg Vertical stroke 550 mm Maximum length of incoming notched sheet: 2400 mm Maximum width of incoming notched sheet: 1500 mm Maximum diagonal of rotatable notched sheet: 2400 mm Maximum bending length: 2250 mm Maximum bending sheet dimension: 2250 mm x 1250 mm. Maximum bending sheet diagonal: 2500 mm. It bends up to 2 mm thickness and up to 125 degree angle. Up to 180 d ...

Used Tormec Curvecutter Machine for cutting segments to manufacture elbows for HVAC and industrial insulation. Diameter of elbow: 160 – 1000 mm. Angle of elbow: max. 90°. Angle range: max. 5 – 46°. Number of segments in one pass: 5 (depending on diameter). Overmeasure for seam: 1 – 20 mm. Overmeasure for seam: 1 – 20 mm. Extension for muff: 1 – 50 mm. Material: steel: bright, galvanized and stainless. Processable sheet: 0,4 – 1,2 mm (depending on material) (28 to l8 ga). Max. size of sheet: Width max. 1500 mm. Length max: 3200 mm. Speed of feed: 2 – 8,0 m/min. Power: 2,5 kVA. Power supply: 4x400V / 50Hz + PE. Machine in perfect working condition( only 1542 operating hours ), ready to use.

We have used Baykal HNC 8116 CNC hydraulic guillotine shears for sale. The shears have a cutting length of 8060mm and the maximum sheet thickness is 16mm The machine was purchased as new and has been working with us since 2014. During this period, the machine was not very usable, we mostly used it to cut sheets with a thickness of 3-8 mm. The meter reading is 3515h Below are some basic information • Welded steel structure providing the necessary rigidity and durability • CYBELEC CNC control with the possibility of programming the bumper, the number of cuts, the cutting angle, the gap between the blades; • Motorized rear bumper driven by a ball screw with a tilting function to enable the cutting of oversized sheets • Protection of the operators fingers from the front of the machine • 1000 mm long front supports • Side recess in the 350 mm frame †...

Near new condition Serial number 38854 Manufacturing 12/2020 Pump hours: 2260 hours Cutting hours: 26 hours Number of cuts: < 13,000 cuts Cutting length 6200 mm Sheet thickness 6.35 mm Sheet thickness for stainless steel 4.0 mm Cutting angle 0.5 - 2.5°. Number of cuts 10-30 strokes/min Oil capacity 350 liters. Rear stop - adjustable 1,000 mm Motor power 18.5 kW Weight 23,000 kg. Dimensions L-W-H 7200 x 1950 x 1680 cm Equipment : - electric rear stop managed by CN - with LVD digital positioning display Bh283yzfico - electric sheet metal support with hold function - sheet metal clamping pad for fragile sheets - rear protection by light curtain - adjustable recoil of the stop before the start of the cut - automatic cutting angle adjustment - automatic adjustment of the clearance between blades - electrical limitation of the cutting length - 1 square arm 1 ...

We sell here a Zwick Roell tensile and compression testing machine Zwick Roell Z2.5 BTC-FR2.5TN D09 with Testcontrol I and TestXpert software. The machine is in a tagless condition and fully functional! PC and monitor included! More photos will follow! Test force: 2.5kN Test chamber width: no limitation Height of lower test chamber: 365 ... 1040mm Scope The ZwickRoell zwickiLine material testing machine Z2.5 TN+ is a high-performance, flexible inspection solution for a variety of demanding test tasks. The Material testing machine is ideal for high-precision testing requirements as well as for the Research and development. For testing tasks under cleanroom conditions, the zwickiLine Z2.5 TN+ is also ideally suited. They in production and testing areas, the cleanroom Class 5. Due to the special technical properties, the zwickiLine Z2.5 TN+ for testing metals, Spring ...

RA1156 Flow rack for storage according to the FIFO principle (First In - First Out) for short ways and fast access times when picking! Basic field with 5 levels consisting of: 2 x upright frame 5 x throughfeed frame kink design 12 x roller strips per level (4 per channel) 2 x stiffening cross beams 20 x adjustment hooks (suspension angle) width: 2040mm depth: 1450mm height: 2500mm Maximum shelf load: 420kg Maximum field load: 1800kg Cultivation field with 5 levels consisting of: 1 x stand frame 5 x throughfeed frame kink design 12 x roller strips per level (4 per channel) 2 x stiffening cross beams 20 x adjustment hooks (suspension angle) Price per cultivation field 650,00€ plus VAT Prices net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Width in mm: 2040 Depth in mm: 1450 Height in mm: 2500 Maximum compartment load: 420 kg Maximum field load: 1 ...

Transnorm curved belt conveyor right bend 90°-1050-900 IR900 RA2115 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 90° nominal/external width (NB): 1050 mm belt width (GB): 900 mm innerradius (IR): 900 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DRS71S4/MM05/LN Electrical Data: 380-500 V, 0,55 kW Conveying speed: Frequency converter for stepless speed control Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2012 condition: very good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 1050 Belt width in mm: 900 angle: 90° Driven: YES Running direction: RIGHT Engine type: SEW Eurodrive KW: 0,55/S1 Conveyor speed m / s: freely adju ...

Transnorm belt curve conveyor right 90°-885-700-IR400 RA1830 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. Technical data: Conveying length middle radius (NL): 1178 mm Frame width (NB): 885 mm belt width (GuB): 700 mm height (BH): 170 mm height including motor (MH): 370 mm Inner radius (IR): 400 mm Conveying angle: 90° degree ...

Lippert conveyor roller curve 90° 980-900 IR900 RA2114 Technical data: Condition: good (used) Engine: fully functional Angle: 90° Inner radius (IR): 900 mm Nominal/outer width (NB): 980 mm roller width (NUB): 900 mm Pitch: 75-125 mm Motor Type: SEW three-phase motor, R40DT71D4BM Engine power: kW 0.37 S1 Hz 50 Scope of delivery: without supports (if necessary please enquiries) Optional: supports Price: plus VAT from central warehouse Dr. Sonntag KG 97076 Wuerzburg Features: nominal voltage: 380-500V Running direction: links/ rechts condition: good (used) Nominal / inner radius in mm: 900 Nominal / outside width in mm: 980 Roll width in mm: 900 angle: 90° Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfac ...

grinding length: 1.000 mm grinding width: 600 mm workpiece height: 400 mm Control: SINUMERK 840 D Grinding Area: : grinding range: max. 1.000 x 600 mm travel cross (z-axis): 540 mm distance table surface - grinding spindle centre: max. 600 mm Travel vertical (Y-axis): 500 mm Max. working height on new grinding wheel: 400 mm workpiece table: : Electro permanent magnetic plate: 800 x 500 mm pole pitch: 18 mm clamping force in 8 levels: - Table drive (X-axis): : Incremental encoder in the longitudinal axis X axi: - table speeds: 2-35.000 mm/min Electromechanical longitudinal movement: - by means of digital servo motor,: - toothed belt and ball screw: - Preloaded precision rolling guide size 35: - Central grease lubrication: - Automatic vertical feed (Y-axis): : min. feed size: 0,001 mm measuring system: Galsmaßstab Max. distance spindle centre - table: 700 Grinding head vertical: 550 mm El ...

: neu : ca. 10 Wochen ab Auftrags : Spanien : 47600 € : 966.28 € : 60 to : 500 mm : 5 : 40x11 mm : 32 mm : 350x15 mm : 120x10 mm : 45/40 mm : 150x10 mm : 5,5 kW : 1950 mm : 2000 mm : 1900 mm : 1900 kg with bending station 5 working stations flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release user manual in GERMAN and ENGLISH Semipaxy:Increased repeat accuracy instead of time consuming laying out ·including B&,R 15", CNC with touchscreenand integrated keyboard ·automatic positioning in x- and y axis ·manual feed of sheet to the stop ·simple grafic programming by touchscreen ·working area 1.000 x 400 mm ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 29300 € : 594.79 € : 85 to : 300 mm : 5 : 40/15 bzw. 24x24 mm : 450x15 / 450x18 mm : 475 mm : 130x130x13 mm : 45/40 mm : 12 mm : 200x12 mm : 9,2 kW : 2300 mm : 1200 mm : 2100 mm : 2400 kg hydraulic drive 2 foot pedals for independant working on punching and section station bending unit with 2 dies, V40 and V70 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 21200 € : 434.6 € : 80 to : 300 mm : 5 : 40/14 bzw. 24/24 mm : 70 mm : 40 1/min : 450x15 / 300x20 mm : 130x130x13 mm : 45 mm : 12x52x90 mm : 9 kW : 2310 mm : 1200 mm : 2050 mm : 2070 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm standard hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH (sample photo shows mod. hyd 80 SD) OPTION ",KIT", EURO 930,-- length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 18600 € : 381.3 € : 55 to : 500 mm : 5 : 40/10 bzw. 20/20 mm : 20 mm : 37 1/min : 300x15 / 200x20 mm : 10x42x90 mm : 5 kW : 2100 mm : 1160 mm : 2090 mm : 1750 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, Ankörnvorrichtung oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH OPTION: Kit € 930,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm The data for this ad was created with ModulMWS - the software solution  ...

: neu : ca. 10 Wochen ab Auftrags : Spanien : 63700 € : 1280.37 € : 165 to : 610 mm : 5 : 40/30 bzw. 34/34 mm : 110 mm : 31 1/min : 750x20 / 400x30 mm : 205x205x18 mm : 60 mm : 16x58x110 mm : 15 kW : 2950 mm : 1600 mm : 2200 mm : 6300 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH (sample photos) OPTION ",KIT", € 930,-- length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm Furt ...

: neu : ca. 10 Wochen ab Auftrags : Spanien : 31600 € : 641.48 € : 110 to : 610 mm : 5 : 420/20 bzw. 28/28 mm : 80 mm : 28 1/min : 600x15 / 400x20 mm : 152x152x13 mm : 50 mm : 13x52x90 mm : 9 kW : 2690 mm : 1400 mm : 2200 mm : 3300 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH OPTION: Kit € 930,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm The data for this ad was created with ModulMWS  ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 24400 € : 500.2 € : 80 to : 500 mm : 5 : 40/14 bzw. 24/24 mm : 70 mm : 40 1/min : 450x15 / 300x20 mm : 130x130x13 mm : 45 mm : 12x52x90 mm : 9 kW : 2310 mm : 1200 mm : 2050 mm : 2400 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH OPTION: Kit € 930,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm The data for this ad was created with ModulMWS - t ...

sheet width: 3050 mm plate thickness: 6,35 mm thickness at Niro-steel: 4,0 mm down holder: 16 Stück table length: 575 mm Control: AMADA cutting angle: 40° - 2°20 ° 0: 305 bar oil volume: 100 ltr. total power requirement: 5,5 kW weight of the machine ca.: 6150 kg range L-W-H: 3790 x 2090 x 1860 mm maintained condition () Furnishing: - AMADA NC control, swiveling control panel at the front left - Electric back stop, NC controlled - electrical/hydraulic cutting angle adjustment - electrical/hydraulic cutting gap adjustment - Sighting device & cutting line lighting to view the scribe line Shear cutting after visual outline - 1x long side stop - 1x long support arms - Safety device behind the machine - 1x freely movable foot switch - Clippings waste container - original instruction manual Special accessories: - AMADA electro-pneumatic sheet metal holding device for thin sheet metal bla ...

sheet width: 3050 mm plate thickness: 12,0 mm ST plate thickness: 8,0 mm VA no. of strokes: 7 - 14 Hub/min down holder: 18 Stück cutting angle: 0,5 - 3,0 ° work height max.: 930 mm back stop - adjustable: 1000 mm Number of working hours: 18.822 h total power requirement: 22,5 kW weight: 8.500 kg range L-W-H: 4180 x 2030 x 2210 mm Furnishing: - Robust hydraulic, link-guided guillotine shears - Electro-motor backgauge with analogue display Fine adjustment via hand wheel, front left - Control panel, front left - manual cutting gap adjustment, from behind - electro-hydraulic cutting angle adjustment - Front finger protection - Stable front support table - 1x side stop with T-slot and millimeter scale - 3x support arms - 1x free moving footswitch - User manual (PDF) Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9325234 The data for this ad was c ...

Bending capacity: Ø45 mm Bending angle: 0 - 180° Bending turret: 8-fold angle adjustment Mandrel length: 4000 mm Bending tools: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Equipped with: - 4 Thorns - Mandrel retraction device Country of origin: Germany Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg

Transnorm belt curve conveyor left GKF 180°-1170-1000-IR1200 -- NEW RA1944 Technical data: Conveying length middle radius (NL): 5340 mm Frame width (NB): 1170 mm Frame width with Bearing cover: 1290 mm Frame width with Bearing cover and gearbox: 1380 mm belt width (GuB): 1000 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 180° degrees middler conveying speed (v m/s): 1,4m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 3 / S1 Belt: KT 96 new Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2021 condition: new Nominal / inner radius in mm: 1200 Nominal / outside width in mm: 1170 Belt width in mm: 1000 angle: 180° Driven ...