12294 offers

maximum number of results exceeded > 1000
please refine your search

Category: 201: saws
New in: 1960
Price: 260 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

Pendulum saw Irion with supporting table L x W x H: 3.0 x 1.2 x 1.8 m Weight approx. 670 kg Built in 1960 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 209: other wood working machines
New in: 2003
Price: request quote
Location: Land-be BE
Seller: Vebim

automatic window production line consisting of the following elements: - Infeed table - CNC controlled milling machine BIMA 810F with tool changer 100 positions - transfer transport - Two profiling machines - Outfeed transport workpiece dimensions (single processing) workpiece length: 300mm min, max 5500 mm workpiece thickness: min 51 mm, max 220 mm workpiece width: min 37 mm, max 140 mm workpiece dimensions: (paired processing) workpiece length: 300mm min, max 5500 mm workpiece thickness: min 2 x 51 mm, max 2 x 110 mm workpiece width: min 37 mm, max 140 mm capacity: 400 to 600 pcs / shift depending on the size and complexity full description on request

Category: 204: grinding machines
New in: 1965
Price: 270 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

Double shaft grinder Schneeberger with polishing wheel L x W x H: 60 x 40 x 50 cm Weight approx. 60 kg Built in 1965 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 209: other wood working machines
New in: 1999
Price: request quote
Location: Land-be BE
Seller: Vebim

Panel thickness: 12 - 60 mm Feed speed: 18 - 24 m/min Edge thickness: 0,4 - 3 mm for coil edges, 0,4 - 20 mm for strips / solid wood Equipment: Help carriage feeding the panels rectangular automatic fence at the infeed Squaring device: 2 x 3,0 KW Panel edge pre-heater Hot melt unit: QA34 / A20 edge magazine Lateral pressure rollers, thickness programmable, 1 driven, 6 non-driven rollers End trims HL83, programmable change straight/chamfer, 2 motors 0,5 kW Rough trimming: 2 x 1,5 KW Top/bottom fine trimming, tilting, 2 x 0,4 kW Contour trimming FK 13, 2 x 0,4 KW, with 8-fold toolchangers Universal milling motor 4kW Profile scrapers Flat scrapers Buffing unit with oscillation Controlls: HOMATI ...

Category: 206: presses
New in: 1975
Price: 760 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

Gluing stand Pneum.. Format l: 3 m B: 2 m L x W x H: 3.0 x 1,40 x 2.2 m Built in 1975 Weight 350 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 209: other wood working machines
New in: 2009
Price: request quote
Location: Land-be BE
Seller: Vebim

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 2 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Buffing Automation package straight/cha ...

Category: 206: presses
New in: 1960
Price: 1.980 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

Veneer press Steinemann Regina hydr. Press area 250 x 140 cm with hot water panels L x W x H: 300 x 180 x 190 cm Weight approx. 4 to Built in 1960 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 209: other wood working machines
New in: 2001
Price: request quote
Location: Land-be BE
Seller: Vebim

4-axis CNC machine Table capacity: X 4500, Y 1250, Z 185 mm. Axis stroke: X 4830, Y 1785, Z 250 mm. Axis speed: X 70, Y 60, Z 12 m/min. Equipment: 8 support rails with vacuum cups 1 router, 7,5 kW motor, HSK F63, C-axis toolchanger with 10 positions toolchanger with 12 positions 1 horizontal router , 5,5 kW motor 17 vertical spindles ohrizontal spindles 6 in X direction, 2 in Y direction 1 X/Y grooving saw Vacuum pump 100 m3/h

Category: 209: other wood working machines
New in: 1965
Price: 290 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

Milling cutter sharpening machine Schneeberger L x w x H: 80 x 80 x 150 cm Weight approx. 390 kg Built in 1965 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 209: other wood working machines
New in: 2013
Price: request quote
Location: Land-be BE
Seller: Vebim

Edges up to 3 mm from coil, 6 mm strips Workpiece width min: When Workpiece thickness 12-22mm 70 mm When Workpiece thickness23-40 mm, 120 mm When Workpiece thicknesse 41-60mm 150 mm in relation to workpiece length Feed speed 11 m/min Equipment: Pre-Milling 2 X 2,2 KW Pre-heating of panel edge Glue aggregate A6 Coil edge magazine Pressure zone, central positioning End trims, chamfer 15°/straight, 2 X 0,18 KW, 12.000 rpm, electro-pneumatic setting central control Top & Bottom trimmng, 2 X 0,27 KW, automatic adjustment when switching from straight to angle Corner rounding unit 1 X 0,35 KW, 12000 rpm, max. 3 mm edge thickness, workpiece thisckness: max. 40 mm, feedspeed 11 m/min., min workpiece ...

Category: 209: other wood working machines
New in: 1959
Price: 270 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

Planer blades Shcärfmaschine GF Working length 450 mm L x W x H: 1.20 x 80 x 1,60 m Weight approx. 680 kg Built in 1959 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 109: other metal working machines
New in: 2000
Price: request quote
Location: Land-ch CH
Seller: ibeXtra Sàrl

State: Good condition. Machine   X: mm 350 Y: mm 250 Z: mm 270 Table dimension: mm 600 x 400 Working tank dimension mm 975 x 555 x 350h Capacity of the tank: lt 180 Max weight part: kg 550 Max electrode weight: kg 50 Distanza tavola-pavimento: mm 810 Machine dimension: mm 2080 x 1955 x 2350 Machine weight: kg 3200 The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Category: 209: other wood working machines
New in: 1958
Price: 270 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

Circular saw sharpening machine Vollmer CNS L x W x H: 120 x 80 x 180 cm Built in 1958 Weight approx. 580 kg The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 109: other metal working machines
New in: 2005
Price: request quote
Location: Land-ch CH
Seller: ibeXtra Sàrl

[embed]https://youtu.be/sji9llsak-s[/embed] State: Machine still working by customer IX-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight: Taper angle/height: Automatic Wire Feeding: Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Category: 107: sheet metal working
New in: 1999
Price: request quote
Location: Land-de DE
Seller: mteg GmbH

Year of construction: 1999 Hours of operation machine: 57.720 h (21.02.2019) Hours of operation a laser: 57.849 h (21.02.2019) Hours of operation a beam: 27.379 h (21.02.2019) Laser power: 3000 Watts Working range: 2500 x 1250 x 115 mm Control: Siemens Sinumerik 840 D Max steel approximately: 20 mm Max stainless steel approx.: 12 mm Max aluminium approx.: 8 mm Space requirement approx.: 6500 x 4800 x 2000 mm Approximate weight machine: 7,500 kg Power consumption: 65 kVA Standard equipment -Closed machine frame with integrated laser unit -Lighting of workroom -Oil spray -Position laser diode -SprintLas -AutoLas - HI-LAS TRUMPF laser TLF 3000, RF excited CO2 laser -Co ...

Category: 209: other wood working machines
New in: 1999
Price: 6.900 EU€
Location: Land-pl PL
Seller: Kennedy Machines

The machine has two tables to the pallet nailing. While nailing pallets on one form, the personnel operating the machine are arranged to another pallet on the second form, and so alternately. Such a work system provides full use of the machine to operate. The using of the machine requires two employees.

Category: 107: sheet metal working
New in: used
Price: request quote
Location: Land-de DE 64367 Mühltal (Nieder-Ramstadt), An der Schillertanne 7
Seller: Hagen Busch Maschinenhandel

The machine can be visited at us like in the camp. Manufacturer: Binmak Country of origin: Turkey 2019. Work range approx. 1050 x 4, 0 mm Round rollers mind up to 4 mm up to 5 mm possible before bending. the rollers are hardened to the conical rollers with foot pedal Electrically approx. 2.2 kw Weight approx. 895 kg Roll diameter: 110 mm Engine with cast iron housing Side swing-out top roller Main motor with brake With wheel up and down moving behind and front roll, Separate from the machine, mobile control panel and foot pedal Emergency stop

Category: 103: milling machines
New in: used
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

x-travel: 900 mm y-travel: 350 mm z-travel: 350 mm table surface area: 1000 x 400 mm tool taper: SK 40 turning speed range: 11 - 1500 U/min total power requirement: 7 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 1,9 x 1,4 x 2,0 m

Category: 101: boring mills and machining centers
New in: 2001
Price: request quote
Location: Land-de DE 56281 Emmelshausen, Dahlienweg 8
Seller: Mac-Tec

Procedures [x x Y x Z]: 1250 x 880 x 800 mm Number of axles: 3 control: HEIDENHAIN TNC 426/430 spindle retainer: HSK A 63 table size x: 1500 mm Table size Y: 1050 mm Tool changers: 30 - fold

Category: 103: milling machines
New in: used
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

x-travel: 1200 mm y-travel: 450 mm z-travel: 300 mm table surface area: 1500 x 400 mm tool taper: SK 40 turning speed range: 32 - 1400 U/min total power requirement: 4 / 5,5 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 1,9 x 2,0 x 2,1 m

Category: 203: planing machines
New in: 1960
Price: 1.390 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

Abrichthobelmaschine Müller Brugg FA6M Masch. No. 23 Planing width 600 mm Table length 3000 mm L x W x H: 3.0 x 1.0 x 1.2 m Weight CA. 880 kg Built in 1960 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Velen-Ramsdorf (46342)
Seller: WMT GmbH & Co. KG

bore capacity in steel (diameter): 45 mm throat: 350 mm bore stroke: 125 mm spindle taper: SK 40 spindle turning speed range: 75 - 3200 U/min : 650 mm : 350 mm table surface area: 900 x 250 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,65 t dimensions of the machine ca.: 1,2 x 1.2 x 1,5 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Category: 202: milling machines
New in: 1983
Price: 4.990 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

Milling machine / Kehl machine OLMA Tiltable rear 25 °,. front 4 ° with feed HolzHer and SUVA protection L x W x H: 1.0 x 1.0 x 1.6 m Weight approx. 890 kg Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 102: lathes
New in: 1978
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

turning diameter over bed: 430 mm turning diameter over slide rest: 240 mm turning length: 1000 mm turning speeds: 18 - 1800 U/min centre height: 215 mm spindle bore: 55 mm tailstock quill taper MT: 5 MK weight of the machine ca.: 2,2 t Dimensions (LxWxH): 2,5 x 1,3 x 1,3 m Center lathe. - stepless speed - 3-jaw chuck 160mm - Quick change steel holder - Coolant device - splash guard wall and feed protection - Machine lamp

Category: 1101: power generators
New in: 2008
Price: request quote
Location: Land-na NA other
Seller: Brown Energy Group Inc

Jenbacher JMS 620 & J320 Natural Gas Generator Plant 5 MW Complete Cogeneration Plant with 3119 KW Jenbacher JMS 620 Gas Generator Set, Year 2008, 16,000 hrs, (2) 1064 KW Jenbacher 320 Gas Generator Sets, 1500 rpm, 50 HZ, Fuel; Natural Gas & LPG, Gas Boiler, Evaporator, Economiser, Ventilations system, Heat exchanger, Electrical Control room, Cooling System, Transformers, all electrical equipment. Maintained since installation with all service records available.

Category: 105: saws
New in: used
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

cutting diameter: 250 mm capacity 90 degrees: flat: 280 x 220 mm capacity 90 degrees: square: 220 x 220 mm capacity 45 degrees: flat: 220 x 200 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 140 x 100 mm capacity 60 degrees: square: 100 x 100 mm capacity 60 degrees: round: 110 mm turning speed range:: 36 / 72 m/min dimensions of saw-band: 2950 x 25,4 x 0,9 mm weight of the machine ca.: 0,4 t Dimensions (LxWxH): 1,5 x 0,9 x 1,5

Category: 202: milling machines
New in: 1962
Price: 390 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

Kettenstemmer OLMA with drilling unit L x W x H: 100 x 80 x 240 cm Weight approx. 730 kg Built in 1962 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 102: lathes
New in: 1978
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

turning diameter over bed: 430 mm turning diameter over slide rest: 240 mm turning length: 800 mm turning speeds: 18 - 1800 U/min centre height: 215 mm spindle bore: 55 mm tailstock quill taper MT: 5 MK weight of the machine ca.: 2,2 t Dimensions (LxWxH): 2,3 x 1,3 x 1,3 m Center lathe. - stepless speed - 3-jaw chuck 160mm - Quick change steel holder - Coolant device - splash guard wall and feed protection - Machine lamp

Category: 1101: power generators
New in: 2012
Price: request quote
Location: Land-na NA other
Seller: Brown Energy Group Inc

40 MW MWM TCG 2032 V16 Natural Gas Generator Plant (8) Eight TCG 2032 V16 Natural Gas Generator Sets, 50 HZ, Complete combined cycle package with all auxiliaries, Commissioned in 2012, Plant is complete and has been very well maintained with maintenance records on site. This is a rare find and priced for immediate sale. Contact us to arrange inspection.

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

bore capacity in steel (diameter): 13 mm throat: 167 mm bore stroke: 18050 mm : 20 mm spindle taper: MK 2 spindle turning speed range: 50 - 2200 U/min : 130 mm : 300 mm vertical adjustment: 190 mm table surface area: 500 x 180 mm connected load frequency: 230 V total power requirement: 0,35 kW weight of the machine ca.: 70 Kg dimensions of the machine ca.: 0,7 x 0,7 x 0,9 m Drilling and milling machine - Cross Support - Cabinet - Swivel spindle head left / right 90 ° - Feed via hand crank

Category: 210: window production machines
New in: 1959
Price: 490 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

PIN slot machine Müller Brugg L x W x H: 270 x 190 x 180 cm Weight approx. 3400 kg Baujahr1959 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 103: milling machines
New in: 1986
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

x-travel: 1140 mm y-travel: 300 mm z-travel: 300 mm table:: 1450 x 320 : 600 mm turning speed range - horizontal: 35 - 1500 U/min turning speed range - vertical: 38 - 1440 U/min feed: 10 - 510 mm/min total power requirement: 7 kW weight of the machine ca.: 2,9 t dimensions of the machine ca.: 1,9 x 2,0 x 2,1 m

Category: 101: boring mills and machining centers
New in: 1999
Price: request quote
Location: Land-de DE 63165 Mühlheim am Main, Carl-Zeiss-Str. 8-10
Seller: H.-G. Zach Werkzeugmaschinen GmbH

Type of machine: CNC 5-axis universal machining center,. Manufacturer: DMG (Deckel-Maho). Model: DMU 50 V,. Control: HEIDENHAIN TNC 426, 5 axes simultaneous. Year of construction: 1999. Condition: very good,. Type of offer: used machine, ,. Technical data:. Table: NC swivel rotary table Ø 500 x 380 mm,. Paths:. x = 500 mm,. y = 380 mm,. z = 380 mm. Spindle speed: 20-15000 rpm,. Spindle retainer: SK 40. Spindle drive: 10.0/15.0 kW. Comment:. 24-fold tool changer. Coolant system. El. Handwheel. Weight: 4400 kg, ,. The machine is in a very good shape and ready for operation. It can be visited and demonstrated at our location.,. ,. We will be pleased if you t ...

Category: 103: milling machines
New in: 2012
Price: request quote
Location: Land-CH Switzerland, 9527 Niederhelfenschwil
Seller: ProdEq Trading GmbH

x travel: 560 mm y travel: 610 mm z travel: 625 mm --------------------------------------------------: WORKING RANGE -CUBIC-: - number of processing axes (excl parallel axes): 4 - .. among of them simultaneous CNC axes: 3 - X-axis travel: 560 mm - Y-axis travel: 610 mm - Z-axis travel: 625 mm TABLE: - table surface (left-right): 400 mm - table surface (front-back): 400 mm - workpiece load (max): 400 kg - - positioning/indexing: 0.001 ° MILLING SPINDLE / HEAD: - spindle revolutions (min): 50 /min - spindle revolutions (max): 15000 /min - tool fixture: ISO BT 40: - drive power: 15 kW AXIS DRIVES: - rapid traverse: 60000 mm/min TOOL MAGAZINE: - number of positions: ...

Category: 202: milling machines
New in: 1987
Price: 670 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

Dovetail milling machine HOffmann MU 2 Masch. No. 4288 L x W x H: 80 x 60 x 60 cm Weight approx. 60 kg Built in 1987 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 101: boring mills and machining centers
New in: 2004
Price: request quote
Location: Land-CH Switzerland, 9527 Niederhelfenschwil
Seller: ProdEq Trading GmbH

x travel: 650 mm y travel: 600 mm z travel: 500 mm --------------------------------------------------: WORKING RANGE -CUBIC-: - number of processing axes (excl parallel axes): 5 - .. among of them simultaneous CNC axes: 5 - X-axis travel: 650 mm - Y-axis travel: 600 mm - Z-axis travel: 500 mm TABLE: - clamping surface diameter: 280 mm MILLING SPINDLE / HEAD: - spindle revolutions (max): 18000 /min - tool fixture: HSK A63: TOOL MAGAZINE: - number of positions: 76 ELECTRICAL SPECIFICATIONS: - mains power supply: 43 kVA - mains voltage: 400 V - mains frequency: 50 Hz DIMENSIONS / WEIGHTS: - space requirements -left/right-: 6000 mm - space requirements -front/bac ...

Category: 201: saws
New in: 1961
Price: 390 €
Location: Land-ch CH Eriswil
Seller: MATEC system+technik GmbH

Bandsaw Olma Roll ø 800 mm L x W x H: 110 x 100 x 240 cm Weight there. 790 kg Built in 1961 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 102: lathes
New in: 2005
Price: request quote
Location: Land-CH Switzerland, 9527 Niederhelfenschwil
Seller: ProdEq Trading GmbH

turning diameter over bed: mm spindle passage: 32 mm turning length: mm --------------------------------------------------: BASIC FUNCTIONS: - number of spindles: 2 - - counter spindle: yes: - number of turrets: 2 - spdl. indexing device: yes: - live positions: yes: - number of c-axes: 2 - number of y-axes: 3 WORKING RANGE TURNING: - bar diameter (max): 32 mm MAIN SPINDLE: - spindle revolutions (max): 7000 /min - drive power: 5.5 kW - c-axis: yes: COUNTER SPINDLE: - spindle revolutions (max): 7000 /min - drive power: 2.2 kW - c-axis: yes: X/Z SLIDE: - traverse velocity Z (min): 10000 mm/min - traverse velocity Z (max): 10000 mm/min - traverse  ...

Category: 108: welding machines
New in: 2014
Price: request quote
Location: Land-de DE 18069 Rostock, Reusenweg 1
Seller: OSKAR BROZIAT GMBH & CO.KG MASCHINEN + SERVICE

• 6-axes industrial robot TA1400 with G3 control unit • repeat accuracy: 0,1mm • max / min range 1.374mm / 352mm • PANASONIC power source 350A • MIG / MIG Puls / MAG / MAG Puls / WIG option • steel, stainless steel, aluminium • wire feed paket • BINZEL welding torch watercooled • electric 2 station - table 2 x 1.100mm x 600mm • welding torch cleaning device • complet safety housing wit stainless steel exhaust hood • user manual working hours: • machine on: 2.519h • servo on: 2.056h • programming on: 653h • electric arc on: 536h

Category: 101: boring mills and machining centers
New in: 2016
Price: request quote
Location: Land-CH Switzerland, 9527 Niederhelfenschwil
Seller: ProdEq Trading GmbH

x travel: 660 mm y travel: 405 mm z travel: 510 mm --------------------------------------------------: WORKING RANGE -CUBIC-: - number of processing axes (excl parallel axes): 3 - X-axis travel: 660 mm - Y-axis travel: 405 mm - Z-axis travel: 510 mm TABLE: - table surface (left-right): 760 mm - table surface (front-back): 405 mm - workpiece load (max): 682 kg MILLING SPINDLE / HEAD: - spindle revolutions (max): 10000 /min - tool fixture: ISO SK 40: - drive power: 11 kW AXIS DRIVES: - rapid traverse X: 24 mm/min - rapid traverse Y: 24 mm/min - rapid traverse Z: 24 mm/min TOOL MAGAZINE: - number of positions: 20 DIMENSIONS / WEIGHTS: - space requirements -left ...

Category: 1102: engines
New in: used
Price: request quote
Location: Land-de DE 49377 Vechta
Seller: Energie-Projektgesellschaft Langenhagen mbH

Nominal power Electr. 1,000 kW Rated therm. 1,267 kW 10-kV generator The cogeneration is delivered complete with control panel. The motor has been November 2017 decommissioned and was properly preserved. Interfaces are the flanges of the emission -, heating or gas side flanges or connections directly on the CHPS module directly. CHP module consisting of motor, generator, exhaust turbocharger, oil and cooling water Heat exchanger, Cabinet with PLC control and operating unit (Diane blue) Complete with frame. Do not include e.g. The gas control line, automatic oil refill, exhaust silencer, exhaust-gas heat exchanger, Table coolers, any heating circuit pumps or mixer

Category: 102: lathes
New in: 2000
Price: request quote
Location: D-59302 Oelde
Seller: Stiens Werkzeugmaschinenhandelsgesellschaft mbH

turning diameter: max. 570 mm turning length: 1.530 mm control: MSC 501 swing diameter: max. 800 mm Swing dia. over traverse guideway: 420 - 860 mm distance between spindles: 1.828 mm Main spindle:: turning speed range - main spindle: 35 - 3.500 min/-1 power capacity - main spindel: 18,5 / 15 kW no. of turning speeds: 2 spindle nose: JIS A2-8 usable bar diameter: 73 mm max. bar capacity: 73 mm spindle bore: 86 mm spindle bearing diameter: 130 mm C-Axis: 0,001 ° chucking diameter: 250 mm Subspindle:: Spindle speed range subspindle: 50 - 3.500 min/-1 power capacity - Sub spindle: 11 / 7,5 kW no. of turning speeds: 2 spindle nose: JIS A2-6 usable bar diameter: 52 mm max. bar capacity: 60 mm  ...

Category: 104: grinding machines
New in: used
Price: 4.800 €
Location: Land-de DE Baden-Württemberg
Seller: Weyhersmüller GmbH & Co.KG

Min. 1.5 mm diameter range Max 165 mm diameter range Maximum drilling length 406 mm Spindle speeds: Number (step) 12 200 RPM to 2500 RPM Lifting speed: Number (level) 5 80 H / up 310 H/min Connection 50 Hz 3 x 380 Volt Spindle motor 0.73 kW Machine weight approx. 450 kg Dimensions machine: Lxwxh 1500 mm x 1300 mm x 1600 mm Accessories: Different sizes of honing Ahlen ect... Documentation

Category: 101: boring mills and machining centers
New in: 2002
Price: request quote
Location: Dreieich
Seller: KIRCHGEORG Werkzeugmaschinen GmbH

x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm CNC-control: iTNC 530 HEIDENHAIN Table dimensions: 1000 x 600 / Ø 600 mm max. table load: 500 / 350 kg spindle taper: SK 40 spindle turning speed range: 20 - 12.000 U/min feed range: 20 - 10.000 mm/min rapid traverse: 26 m/min tool change unit: 24 Pos. coolant: IKZ chip conveyor: Spiralförderer kW voltage: 400 V total power requirement: 34 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,45 x 3,60 x 2,30 m coolant equipment: 1,15 x 1,75 x 1,90 m - serial-no.: 11120007803 - Machine ON: 48.804h - Program ON: 19.147h - 3D measuring device TS 642 HEIDENHAIN - electronical hand wheel - IKZ 40 bar

Category: 1102: engines
New in: 2003
Price: request quote
Location: Land-de DE 30853 Langenhagen, Am Schulzentrum 3-5
Seller: Energie-Projektgesellschaft Langenhagen mbH

Nominal power Electr. 1,000 kW Rated therm. 1,267 kW 10-kV generator The cogeneration is delivered complete with control panel. The engine is still in operation and can be visited until end of March 2019. Interfaces are the flanges of the emission -, heating or gas side flanges or connections directly on the CHPS module directly. The delivery includes in addition also the exhaust gas heat exchanger. CHP module consisting of motor, generator, exhaust turbocharger, oil and cooling water Heat exchanger, Cabinet with PLC control and operating unit (Diane blue) Complete with frame and exhaust gas heat exchanger. Do not include e.g. Automatic oil refill, any heating circuit pumps, e ...

Category: 102: lathes
New in: 2005
Price: request quote
Location: Dreieich
Seller: KIRCHGEORG Werkzeugmaschinen GmbH

turning diameter over bed: 560 mm turning diameter over slide rest: 365 mm turning length: 1300 mm center height over bed: 280 mm centre distance: 1300 mm bed width: 360 mm digital readout: 3-Achsen HEIDENHAIN spindle taper: KK 8 DIN 55022 spindle bore: 62 mm turning speed range: 11,2 - 2240 U/min power requirement: 15 kW 3-jaw-chuck diameter: 315 mm quick change toolholder: MULTIFIX Typ B taper in tailstock-quill: MK 5 dia. of quill: 80 mm quill stroke: 190 mm coolant: voltage: 400 V total power requirement: 18 kW weight of the machine ca.: 4,0 t dimensions of the machine ca.: 3,40 x 1,50 x 1,80 m - serial-no.: T 1022.2067.806 - main spindle storage new - Maschine is geometrically measure ...

Category: 102: lathes
New in: used
Price: 5.700 €
Location: Land-de DE 73450 Neresheim, Heidenheimer Str. 5
Seller: Umrath Handel & Verwertung

The engine comes from a training workshop and is in very good condition! Manufacturer: Voest Alpine Type: DA - 160 Tip height 165 mm Top width: 650 mm Spindle bore: 36 mm Turning diameter over bed: 330 mm Swing over carriage: 190 mm Speed range: 30-2,500 rpm in 16 steps 3 - jaw Chuck Clamping pliers set Multi fix with 2 x holder Machine weight: 600 kg Dimensions: 1,600 x 900 x 1,250 mm Price plus 19% VAT from site near Stuttgart Mistakes and intermediate sale is reserved

Category: 104: grinding machines
New in: used
Price: request quote
Location: Malsch
Seller: Emuk Werkzeugmaschinen GmbH

grinding length: 800 mm grinding width: 500 mm workpiece height: 525 mm spindle turning speed range: U/min dimensions of the machine ca.: 2,9 x 1,9 x 2,2 m grinding wheels: 100x50x76 weight of the machine ca.: 4,1 t Vertiacal fast movement up-down and handwheel Z - axis automatsich / manuell Y - axis automatisch / manuell dressing nit, cooling

Category: 109: other metal working machines
New in: 1998
Price: request quote
Location: Land-de DE 56281 Emmelshausen, Dahlienweg 8
Seller: Mac-Tec

Procedures: [X x Y x Z] 600 x 400 x 450 mm Table size x 750 mm Table size Y: 500 mm maximum workpiece weight: 1000 kg Electrode changer: 24 - fold C-axis Builder: 64 amps Quill Arbor: EROWA ITS Rotationswechlser

Category: 109: other metal working machines
New in: used
Price: request quote
Location: Malsch
Seller: Emuk Werkzeugmaschinen GmbH

honing diameter: 1,5 - 165 mm centre height: 240 mm bore - min./max. - machining: max. 400 mm spindle turning speed range: 200 - 1600 U/min stroke: mm total power requirement: kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,0 x 0,85 x 1,5 m

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)