an used for sale

Label printer, barcode printer, printer, logistic labeling system -Labeler Anvos Model PB 101 FlagTag Type: HA101FTS -Barcode printer manufacturer SATO type: CL408e-2A -Max. Print width: 110 mm -Dimensions: 880/560/H1365 mm -Weight: 104kg

Three-phase motor, electric motor -Power: 0.25 kW -Speed: 1400 rpm -Shaft: Ø 14 mm -Design: B3 -Protection class: IP 33 -Dimensions: 260/220/H240 mm -Weight: 12 kg

Working Length: 4000 mm

electric motor, three-phase motor -Power: 1.1 kW -Speed: 920 rpm -Shaft diameter: 24 mm -Bolt circle flange: Ø 165 mm -Flange: Ø 200 mm -Design: B5 -Protection class: IP 54 -Dimensions: 315/200/H205 mm -Weight: 15.5 kg

Gear motor, electric motor -Speed: 218 rpm -Power: 0.25 kW -Construction: B5 -Diameter shaft: Ø 22 mm -Protection class: -Dimensions: 445/210/H175 mm -Weight: 19.6 kg

Straightening ruler, straightening rail -Angle: 32° -Dimensions: 3000/50/H8 mm -Weight: 8.4 kg

Three-phase motor, electric motor -Power: 11 kW -Speed: 1460 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 670/400/H320 mm -Weight: 108 kg

1 MONTI ANTONIO continuous belt press for knitted fabric ironing/finishing, with steaming upper plate type 205

Used shredders with gearbox not overhauled and also not repaired. Spare parts such as shafts, scrapers, knives, etc. also available as good as new.

Three-phase motor, electric motor -Power: 0.18/0.25 kW -Speed: 1370/2750 rpm -Shaft: Ø 11 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 210/175/H120 mm -Weight: 4.8 kg

Statomat distributor, control card, output card, control unit, edgebander, edgebander -Manufacturer: AER Drive Electronics -Type: P9101 -Type: P9101 -Number: 7 tax cards available -Price: per piece -Dimensions: 80/135/H30 mm -Weight: 0.11 kg

Statomat distributor, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: AER drive electronics -Type: P8801 -Type: P8801 -Number: 1x control cards available -Price: per piece -Dimensions: 80/120/H30 mm -Weight: 0.11 kg

Statomat distributor, control card, output card, control, edge banding machine, edge banding machine -Manufacturer: AER drive electronics -Type: V004 V003 V002 -Type: V004V003V002 -Number: 20x control cards available -Price: per piece -Dimensions: 80/135/H35 mm -Weight: 0.14 kg

Fronius magicwave 2600, with wire feeder can be used for the robot welding. Machine is in great working condition, equipped with longines controls, wire feeder and welding gun connections for the robots.

resistor, wire potentiometer, resistor -Types see pictures Price: complete Packages: 4 -Bags: 25 -Weight: 8.5 kg

Key data: 70

Single-screw rubber extruder with feed roller and degassing in screws of 70mm and a process length of 22.D - with two-speed temperature-controlled entagling screw - Degassing cylinder with device for static and/or vacuum degassing of the material - a vacuum block pump - two water temperature control units with 9kW heating capacity each, - a Siemens SPS S7 machine with Siemens KTP1200 HMI control panel - a directly driven feed roller feeder for rubber raw strips, a funnel-material stiffening system with Strip monitoring - temperable base body for tool holder and v.m

Glue dosing station MAYER AND MAYER DXR R2020R L-P-PUB PDX20 40-100 P manufactured in 2015 in Germany by MAYER & MAYER HANDELS GMBH. The station was in use for about 3 months in the process. After this time, it was shut down, cleaned and properly secured. All gaskets in the station were replaced with new ones. It is a charging station for manual dispensing / application guns for two-component adhesives. The gun is included for free. Spare parts are offered for the station. Price of the parts to be individually agreed.

Semiconductor relays, switchgear, switching components, semiconductor contactor -Manufacturer: Mosca, solid state relay AND gate -Type: ME 5499 AND gatter -Dimensions: 55/20/H75 mm -Weight: 0.1 kg

SK40 DIN 69871 Oil Feeder met Holder Weldon 40mm A= 65mm For internal cooling for rails without internal cooling through the spindle

Simatic panel, operator panel, machine control, interface panel, control panel, operating unit, control panel, HMI panel, hand-held terminal -Manufacturer: Andras, control panel hand terminal -Type: T-H3LVGA-M7 #0603LV322-U -Total dimensions: 500/460/H110 mm -Weight: 4.8 kg

SK40 DIN 69871 Oil Feeder Weldon 32mm

Optimize existing production line Carsoe Anytray Denester The automatic feeding of the AnyTray CleanLine denester from a buffer of full height tray stacks offers less manual intervention and lower operating costs. The AnyTray electrical buffer is easily integrated into an existing production or packing line. It includes an intelligent electrical control system and a hygienic design. This electrical buffer has few moving parts and low maintenance costs thanks to its design. Speed up to 120 trays per minute. Stainless steel Good working condition

CNC control, card slot, control cards, plug-in cards, circuit boards, control rack, electronic module -Manufacturer: Infra-Antriebe Hans Nelk, Control Electronic Modul Classic -Type: Q1-230 -Individual components: see photos -Dimensions: 240/200/H100 mm -Weight: 3.2 kg

Cup hinge drilling machine -Stops: pneumatically controlled with program selection -Drilling pattern: see the pictures -Dimensions: 4000/1100/H1800 mm

Counting scale, scale, digital scale, market scale, shop scale, price calculating scale -Manufacturer: EXA, Market scale, Retail scale -Type: E 10 -Weighing range: max. 10 kg -Display: Price / kg / Tare, double-sided display -Dimensions: 320/310/H120 mm -Weight: 3 kg

Wire feeder case for MIG/MAG welding machine, MIG/MAG welding machine, wire feeder case, wire feeder -Wire feeder case: with intermediate hose package, water-cooled -Wire feed case: 4-roller drive, Ankarsrum motor -Hose package: Length 15 m -Transport dimensions: 920/630/H300 mm -Total weight: 41 kg

workbench, work table, assembly bench -Width: 1500 mm -Depth: 750 mm -Height: 785 mm -Drawers: 5 -Conductive tabletop with Anka-Plast coating -Weight: 80 kg

workbench, work table, assembly bench -Width: 1500 mm -Depth: 750 mm -Height: 785 mm -Drawers: 5 -Conductive tabletop with Anka-Plast coating -Weight: 80 kg

workbench, work table, assembly bench -Workbench: with conductive tabletop and drawer unit -Width: 1500 mm -Depth: 750 mm -Height: 780 mm -Drawers: 5 -Tabletop: with Anka-Plast coating -Number: 13 workbenches available -Price: per piece -Weight: 89 kg/unit

Impact drilling machine, row drilling machine -Support table: 2200 mm -Multi-spindle head: 5 drill bits -Drill spacing: 32 mm (other multi-spindle heads available) -Version: mobile -Stops: adjustable -Dimensions: 2300/600/H1350 mm -Weight: 240 kg

Mains filter for frequency converters -Type: 09.E4.T60-0001 -Quantity: 1 piece available -Price: per piece -Dimensions: 90/260/H50 mm -Weight: 1.5 kg

Disc valve, flap valve, ball valve -Drive: pneumatic -Connection: DN65 -Material: Stainless steel -Dimensions: 380/100/H130 mm -Weight: 7 kg

Disc valve, flap valve, ball valve -Drive: without -Connection: DN50 -Material: Stainless steel -Weight: 2.2 kg

Disc valve, flap valve, ball valve -Drive: without -Connection: DN50 -Material: Stainless steel -Number: 2 valves available Price: per piece -Weight: 2.2 kg

x-travel: 800 mm y-travel: 450 mm z-travel: 400 mm table surface area: 1385 x 305 mm spindle taper: SK 40 quill stroke: 200 mm spindle turning speed range: 50 - 3500 U/min control: HEIDENHAIN control: TNC 155 total power requirement: 5,8 kW weight of the machine ca.: 2,5 t dimensions: 2,25 x 2,0 x 2,4 m Accessories: electron. handwheeel, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Salva oven and proofer Model: K-5+H-E Serial: 162.313 Stainless electric oven and proofer, adjustable temp and timer controls, up to 300'C with ability to steam, mobile, oven 3ph proofer 1ph

Disc valve, flap valve, ball valve -Drive: without -Connection: DN80 -Material: Stainless steel -Weight: 3.3 kg

Workbench, work table, assembly bench, drawer cabinet, tool cabinet -Width: 1500 mm -Depth: 750 mm -Height: 800 mm -Drawers: 5 -Weight: 80 kg -Conductive tabletop with: Anka-Plast coating

Workbench, work table, assembly bench, drawer cabinet, tool cabinet -Width: 1500 mm -Depth: 750 mm -Height: 780 mm -Drawers: 5 -Weight: 80 kg -Conductive tabletop with: Anka-Plast coating

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve -without: drive -Connection: DN65 -Nominal pressure: PN16 -Width: 100 mm -Material: stainless steel -Weight: 3.3 kg

Packaging line for shrink bags The line consists of : Vacuum packaging machine MULTIVAC C 700 Chamber dimensions (LxBxH): 1060x440x200 mm Machine dimensions (LxBxH): 1270x850x1150 mm Seal bar length: 1 x 1060 mm Machine cycle: 15-40 sec. Voltage: 400 V-3-50 Hz Power: 7,0 kW ; 22 A HENKELMAN DIPTANK 200 A Automatic platform with conveyor belt Digital temperature control Stainless steel casing Maximum loading capacity: 30 kg Immersion depth: 200 mm Immersion time: 3-5 seconds (adjustable) Cycle time: 22 seconds Compressed air consumption 50 l/min 6 bar Automatically controlled water supply Water drain Automatic water level control Built-in scale protection Time switch to preheat water

For sale:Micro Motion MASS flow sensor Type: CMF 200 ANSI 300 LBS Exclusive channel Order number: 8000.3 For more information, please call or send an email. Phone: 06-20758459 E-mail: wh.derikx@gmail.com The price is exclusive of 21% VAT.

Liter per hour: 7000

SUTEAU ANVER VFS 22x15 200t die cutting press was built in 2021 in France by SUTEAU ANVER. The machine is designed for demanding series production in the packaging, clothing and footwear industry. It enables precise cutting of a wide range of non-metallic materials from rolls or sheets, such as rubber, foam, felt or leather. The press force of 200 tonnes, combined with a number of well-proven solutions, guarantees high repeatability of the process and high cutting accuracy. The machining process is fully automatic. A movable beam lowers the head with the blanking die onto the workpiece, performing a precise cut with evenly distributed contact pressure. The cutting point is automatically set in relation to the height of the tool, while the operator can additionally correct its position with an accuracy of 0.01 mm using the control panel. The SUTEAU ANVER VFS 22x15 also enables automati ...

Perkin Elmer A-SI Flat Panel Detector XRD 1640 AN3-EHTS Size: approx. 60 x 67 cm Order No.: 95510373 Date of manufacture: 04/2009 Technology: amorphous Silicon (A-Si) Flat Panel Condition: used, removed from functional system (Nucletron Simulix Evolution) The detector is ideal as a spare part, upgrade or for service and research applications where robust a-Si technology is required. • Before taking over, all devices or systems have been tested on site for their functionality. • The detector is located in our warehouse in Freiberg / Germany and can be picked up immediately • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation, commissioning and configuration  ...

This sturdy platform construction is ideal for expanding your storage or work surface and can be used in a variety of ways in warehouses, workshops or production areas. Dimensions: Length: 15 meters Width: 5 meters Height to top of the floor: 3,000 mm Load capacity: 500 kg/m² Pickup The mezzanine floor can be picked up in the Netherlands, not far from the German border. Other dimensions possible Do you need a mezzanine floor in a different size? Thanks to our large stock of mezzanines and floor coverings, we can in many cases offer an individually tailored solution according to your wishes. Feel free to contact us for more information or a non-binding offer.

The platform is ideal for creating additional storage, picking or work space. Thanks to its modular design, it can be flexibly adapted to different hall sizes and requirements. The mezzanine floor can be picked up in the Netherlands, not far from the German border. Technical data: Area: 100 m² (20 meters × 5 meters or 10 meters × 10 meters) Grid: 5 meters × 5 meters Height to top of the floor: 3,000 mm (adjustable if required) Load capacity: 500 kg/m² Optional equipment: Stairs Railings Other dimensions possible Do you need a mezzanine floor in a different size? Thanks to our large stock of mezzanines and floor coverings, we can in many cases offer an individually tailored solution according to your wishes. Feel free to contact us for more information or request a non-binding offer.

New cabinet with DSE6120 panel and CHINT NM1LE-125S breaker 40A., Completely wired, 2 units available; Gross weight [kg]: 35

Manufacturer: ANDERSON ANDI Model: NC-2616PT Type of machine: CNC machine Voltage: 380 V Frequency: 50 Hz, 3 phase Rated current: 80 A Find more here - .ucymachines/ Contact us at - sales@ucymachines