an used for sale

NEW, 1 set of weld-on hooks / coupling hooks / weld-on parts suitable for JCB 520-50 attachment

NEW, 1 set of weld-on hooks / coupling hooks / weld-on parts suitable for JCB 520-50 attachment

1 set of weld-on hooks suitable for Kramer large mount

1 set of weld-on hooks suitable for Kramer large mount

NEW, 1 set of weld-on hooks / coupling hooks / weld-on parts suitable for JCB 520-50 attachment

1 set of weld-on hooks suitable for Kramer large mount

1 set of weld-on hooks suitable for Kramer large mount

NEW, 1 set of weld-on hooks / coupling hooks / burn-on parts made of S355 steel suitable for Terex TL80, Also other recordings such as Atlas, Avant, Cat, Claas, Deutz Fahr, Euro, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Volvo, Weidemann, Zettelmeyer available!

We sell a large batch of used Konica Minolta and OKI copiers and printers. All equipment comes from lease return or insolvency. The equipment was included in the maintenance contract during the lease. The devices are functional and on all devices there is a test printout with all meter information. Mixed lot: 3x Konica Minolta Bizhub C3100p, 12x Oki ES 4132, 3x Oki ES 5112, 2x Oki ES 7131, 3x Oki ES 4192MFP, 6x Oki ES 5462MFP, 4x Oki ES 5431, 7x Oki ES 8473MFP. We are happy to send meter readings and photos. The sale takes place from our warehouse in Dachau near Munich. Prices are EXW. Please understand that we only sell the entire lot or mixed packages of at least 10x pieces. Invoicing with VAT statement.

Dowel - Anchor, cavity anchor -Anchor: Ø 4 mm -Anchor length: 210 mm -incl. dowel: Ø 8 mm -Quantity per package: 250 pieces -Building authority-approved air gap anchors according to DIN: 1053 -(Material No. 1.4571/1.4401 ) -Dowel: (Ultramid B3S ) -Number of packages: 60 -Price: per package -Weight 6.5 kg/piece

Anthracite grade AO size of pieces - 25-50 mm, sulfur 1% max, ash - 8% max, 6% max volatile - 3.5-4 Сalorific value - 6500-7000 kkal in Lots a 2000 MT Smaller and larger quantities can also be delivered. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire transport process is carried out at the buyer's own expense and at the buyer's own expe ...

Plant: second-hand mobile Chamber filter press Type: Rittershaus & Baldwin AEHIS 1200 Year of construction: 1991 Filter plates sizes: 1200 x 1200 mm Number of plates: filter plates: PP Thickness: Expiration: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. m ² Presses contents: approx. 3000 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Hydraulic power pack: Condition good Cylinder: no leaks, Rod blank-good condition Eccentric screw pump: as before priming pump Eccentric pump: EH2 type Bornemann 1900 Piston diaphragm pump: a pump Piston diaphragm pump: Type SP535N, Emmerich Wear parts: piston diaphragm pump replaced (proof of purchase. E installation: 2007 full service check (proof of purchase. Electrical connection: 125 amp input. Electrical connection: various outputs for external devices i ...

NEW ex works semi-automatic chamfering machine Development and production in England - automatic chuck with material sensor - Automatic spindle start when the cutting head is moved - Max. speed 1,500 rpm - max. rod diameter 80 mm - Adjustable bar flag - max. chamfering/turning length 37 mm - Incl. turning and chamfering tool - Precision three-jaw chuck - large chip collection container for easy cleaning - easy to move with pallet trucks - Weight 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE - certified OPTION: - Oil cooling (fog) € 1.850,- - adjustable stop + universal chamfering tool € 1.650,-

automatic meat ball and fishball forming machine, beef balls, pork balls, fish balls, squid balls, 400-600kgs hour, 18-35mm diameter, stainless mobile frame, 3Ph

CP 2000, ANICOLOR, LACKUNIT, NP

Producer: H & K Model: CIP system Capacity: 1500 l Year of construction: 1983 The tank is equipped with a liquid manometer.

Spectro material analyzer mobile Neyy2 Type Spectrotest JR Capable of analyzing light elements in spark mode, the SpectroTest was built for use in the shop or in the field. Arc or spark excitation is available as well as a UV probe for carbon, phosphorus and sulfur analysis. More data on request

Complete Veneer Peeling Line Working Length: 3300 mm

Veneer Vertical Slicer Manufactured by Angelo Cremona

Veneer Slicer, model TN 4000, manufactured by Angelo Cremona

SANTANDREA DUAL SHAFT SHREDDER, Shafts length 1.500 mm, 77 mm.knives - 2 hooks, 1.500 x 960 mm shredding room, planetary gearbox, Electric motor 75 kW 400v 50hz, Hydraulic pack with 400 lt.tank, loading hopper with oleodynamic pressing unit, hydraulic pack, New electrical control panel, CE compliance, Users manual, electrical drawings, Sturdy carbon steel structure, Dimensions 3.400 x 2.000 mm, width: 1.500 mm. , Power: 75 kw

We offer Doka accessories NEW for the anchor system 15.0 with a 20% discount 14 x Exposed concrete offset 15,0 5cm, new with 20% discount = 32,40€/piece 30 x Flow disc Rd28, new with 20% discount = 28,88€/piece The Doka fair-faced concrete support 15.0 5cm (article number: 581973000) is a galvanised accessory for the Doka 15.0 anchor system. It is used for the precise alignment and uniform hole pattern of tie points in exposed concrete. It has a length of 5 cm and a wrench size of 27 mm. The Doka Rd28 pulley (item number 580497000) is an accessory for the Doka 15.0 anchor system and climbing systems. It weighs about 0.25 kg and is used for precise alignment, positioning and sealing in exposed concrete formwork. If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at ...

Manufacturer: MONTI ANTONIO Laminating-Coating Model: hot melt mod. 908 Type: Fleece and Foam LAMINATION & Coating with COATEM Foam make to inject direct to fabric for Coating. Working widh: 1800 mm Manufacture Date: 2003 (like new with new spare cylinder -hotmelt spareparts) With new spareparts Complete Modernisation in year 2016 with new electricity and software. description: working with SL1 Pleva weftstraitner go to 2 line Lamination Foam or fleece to Fabric

Analytik Jena Merkur Mercury Analyzer Single-beam device with low-pressure lamp Measuring range in the ppt and ppb range. Excitation Fluorescence at 253.7 nm Software

Ansaldo Condensing Steam Turbine Power: 9000 kW RPM: 7500 / 1500 Steam pressure: 40bara Steam temperature: 420 ºC Back Pressure: 0,08bar Number of extractions: 2 Number of stages: 8

Heat and Power Plant with an Absorption Chiller An 850 kW combined heat and power plant with an absorption chiller. The systems ran perfectly until the end and all maintenance was carried out. No damage is known. The CHP ran for 51,429 hours of operation. The absorption chiller has run for 42,350 hours. The following components use an overhauled long block or completely overhauled. The components relevant to assemblies for modernization were marked: - complete panelling - Interfaceschronk - Oil relubrication pump Mechanically overhauled and electrically tested - Oil level monitoring - Plotter heat exchanger - Pressure expansion foll3 (if present) - Pressure transducer and temperature sensors - Rubber rails for motor and generator - Clutch element - Air filter inserts - Safety valves and arnot inserts - Sylomer strips - Hot water preheating pump and heating eleme ...

3x VERSATRONIC RV1s P&P machines which are slow (1200cmp/h) but full fully functional and with a lot of feeders. These machines were manufactured in a UK factory Versatronic. Machine were named Violer, Rosie and Blue. The last one is faster, little better software for fiducial camera for components. All machine are working and were used for prototype and low series like 50pcs electronic or 25pcs or 200pcs electronic. All P&P machines have two cameras, one for fiducial (up camera) and one (down camera) for components. Machines can place without problem components down to 0402 and fine pitch component like QFN or VFQFPN48… Speed for firs two is 1200cmp/h the last one is around 1500cmp/h. All machines have tool changer with 10 positions and one tool for camera auto calibration. Only 5 different tools were used but can be used up to 10 different tools. On one machine you can put u ...

Resistance annealing machine This machine anneals (thermally straightens) stainless steel wires from 0.30 - 0.50mm). FUNCTIONAL DESCRIPTION: - The machine enables heating by direct passage of electric current through the wire through the wire (resistance annealing process). The device is equipped with 4 special power stabilisers for regulation, in combination with an optical pyrometer for temperature control and thermoregulation. - The simultaneous heating of the 4 wires takes place in a chamber saturated with inert gas by the electrical contact transmitted by two conductive V-shaped discs (short-circuit rollers). are transmitted. Two further V-shaped discs have the task of guiding the wires. - The system can be integrated into an existing automatic Scholl disc system, which, however, is not not included in the scope of delivery of the machine. Alternatively, the straightened  ...

Key data: 4000 mm, 2000 mm, 575 mm

Pair of cast iron angle plates Drilling diameter: Ø 27 mm Width: 575 mm Depth: 2000 mm Total height: 4000 mm Unit weight: approx 6 T

Marel concept 500 labelling machine, - top and bottom labelling machine

GRANULATION AND SEPARATION PLANT, Capacity up to 600 kg/h (see below list), separation surface 750 x 375 mm, Vibratig ytable with a 0.750 kW drive, Blower - 0.750 kW drive, Total drive power 1,5 kW, Weight 380 kg, Processing capacity in kg/h approx. :, CU - Solid cable 500, CU - Stranded cable 250, AL - Cable 300, CU - Granulate 600, CU/AL - Radiator scrap 600, Electronic scrap 250, Various plastics 300, Tyre rubber 300, installed power - used power in work: about 60-65% : 1,5 kW, availability: 1 month approx, capacity: up to 600 kg/h, conditions: new equipment, SPECIAL FEATURES: spares usually available in stock - no downtime, CONSIDERATIONS: Ideal to start a profitable recycling business from scraps

Attachment milling machine with Bobcat 115cm attachment, Manufacturer: Wolverine, Year of manufacture 2025, Model TL-12-73W, With hydro drive, 180cm working width, 65cm depth, 65cm height, With 114cm Bobcat skid steer loader attachment, Transport dimensions:, 220cm transport width, 70cm wide, 85cm height

Mounting plate with MS08-Symlock mount and retaining lug, - Recording: MS08 Symlock, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate with MS08-Symlock mount and retaining lug, - Recording: MS08 Symlock, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for hammer HM300 with MS03 mount, - Suitable for Hammer HM300, - Recording: MS03, - Hole pattern: 34 x 40 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate with JCB / Miller / Geith mount, - Suitable for demolition and sorting grapples:, - GRP450, - GR45, - GRP750, - GR75, - Recording: JCB / Miller / Geith, - Hole pattern: 36 x 48 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Toscrew plate for hammer HM100 with MS01 holder, - Suitable for Hammer HM100, - Recording: MS01, - Hole pattern: 26 x 26 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Toscrew plate for hammer HM100 with MS01 holder, - Suitable for Hammer HM100, - Recording: MS01, - Hole pattern: 26 x 26 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for hammer SB70 with MS01 mount, - Suitable for Hammer SB70, - Recording: Martin M02, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for hammer SB70 with MS01 mount, - Suitable for Hammer SB70, - Recording: MS01, - Hole pattern: 13.5 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

PEIFFER electric motor 8.3 kW, 1400 rpm, drive drum 740 x 310mm

Mounting plate with Martin M03 mount and retaining lug, - Recording: Martin M03, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for Hammer HM250 with Martin M03 mount, - Suitable for Hammer HM250, - Recording: Martin M03, - Hole pattern: 29 x 29 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for Hammer HM250 with Martin M03 mount, - Suitable for Hammer HM250, - Recording: Martin M03, - Hole pattern: 29 x 29 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for Hammer HM250 with Martin M03 mount, - Suitable for Hammer HM250, - Recording: Martin M03, - Hole pattern: 29 x 29 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for hammer HM100 with Martin M03 mount, - Suitable for Hammer HM100, - Recording: Martin M03, - Hole pattern: 26 x 26 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

Mounting plate for hammer HM100 with Martin M03 mount, - Suitable for Hammer HM100, - Recording: Martin M03, - Hole pattern: 26 x 26 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock

De DIAVITE DT-15 is een ruwheids- en oppervlaktemetingsinstrument uit de DIAVITE-serie, gebruikt om de oppervlaktekwaliteit van materialen te bepalen in industriële metrologie-toepassingen. Het registreert ruheidsparameters via een stylus/probe en wordt vooral tweedehands aangeboden, omdat nieuwere modellen recentere technologie bevatten.

WACO - KUJAKON high speed planing and cutting line, Manufacture year 2003, Feed speed up to 200 m/min, Wood length 1800 - 6200 mm, WACO high speed planer Solid, - 6 spindles B-R-L-T-T-B, - incl. tooling, KUJAKON automation with de-stacking, infeed and stacking, - Outfeed with multiple cross cutting with 4 saws, - Signode pack strapping system

DME Small Keg Washer - Second Hand CAPACITY: Fills up to 20 or cleans up to 14 kegs per hour (2 station) Fills up to 40 or cleans up to 28 kegs per hour (4 station) SPECIFICATIONS: Individual on / off valves allow filling of one to two or to four kegs (depending on head capacity) at the same time 3600 RPM s/s pump mounted on cart CO2 manifold with valved inlet / outlet and pressure gauge All stainless steel manifolds Portable stainless steel cart with locking casters Motor starter, on/off switch, 20 ft (5m) cord Keg cleaning support racks at 3'6" (1.070m) Counter pressure manifold with bleed off 1 ½” tri clamp connector for kegging tank outlet to filler hose This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk