an used for sale

General SKUR0854 MakeZürcher AG (CH) Type35 m2 No.1886 Year of construction2002 Mounted on legscheck Pressure Working pressure shell6 Bar Working pressure tubes10 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface35 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4404 Heat exchangercheck Horizontalcheck Heating surface35 m2 Tube capacity164 ltr U-typecheck Number of tubes:122 Tube diameter16mm Tube lengthca 5400mm Wall thickness tubes1,0mm Max. temperature-30/200 degr.C Shell capacity206 ltr Shell diameter406mm Shell length3312mm Wall thickness shell4mm Max. temperature-30/200 degr. C Shell connectionsDN65 (2x), DN15 (1x) Cover connectionsDN100 (1x), dia. 100mm (1x) Information LocationBarneveld Floorspace3,7x0,6 M Total height1,3 M Weight750 KGCatalysts & fillersFeed additivesPap ...

General SKU071F418 MakeCarl Canzler GmbH & Co. Düren TypeSpiral heat exchanger No.5913 Year of construction1986 LocationBarneveld Material Tube materialStainless steel Pressure Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface4.2 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface4,2 m2 Tube capacity31/21 Ltr (Channel A/B) Max. temperature160 Degr. C. Information Floorspace0,8x0,6 M Total height0,8 MCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicPlastic & polymersSpicesAgrochemicalsBiotechno ...

General SKU279T633 MakeINNEX APL Apparatebau TypeBEU 457/3400-2 No.H3660 A12-1153-1 Year of construction2013 Mounted on framecheck Pressure Working pressure shell10 Bar Working pressure tubes10 Bar Main Features Shell (Material)Mild steel Tube (Material)Mild steel Surface65 m2 Specified Features - Shell and tube heat exchanger MaterialMild steel 1.0345 (P235GH) Heat exchangercheck Heating surface65 m² Tube capacity160 Ltr. U-typecheck Number of tubes:512 Tube diameter12,3 mm Tube length3500 mm Max. temperature-0 °C/340 °C Shell capacity325 Ltr. Shell diameter480 mm Max. temperature-0 °C/340 °C Shell connections2x dia.80mm Cover connections2x dia.80mm Information LocationBarneveld Floorspace4x0,7 m Total height1,4 m Weight1700 kg CEcheckCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmac ...

General SKU330N520 LocationBarneveld MakeGesellschaft fuer Oeltechnik mbH Waghäusel TypeE-302B No.106/1545/86 Material Shell materialStainless steel 1.4541 (321) Tube materialStainless steel Pressure Working pressure shell13 Bar Working pressure tubes13 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface11.1 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Heating surface11,1 m2 Tube capacity58 Ltr U-typecheck Number of tubes:31 Tube diameter16mm Tube length+/- (2x)3000mm Max. temperature-20 / 200 Degr.C Shell capacity100 Ltr Max. temperature-20 / 75 Degr.C. Shell connections(2x) dia.50mm, (2x) dia.25mm Cover connections(2x) dia.100.. Information Year of construction1986 Floorspace3,7x0,7 MCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other ...

General SKU345S652 LocationBarneveld MakeG.A.B. Neumann GmbH (DE) TypeH-B-6,4 No.10927-8692 Pressure Vacuum possiblecheck Working pressure shell6 Bar Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Surface4.8 m2 Specified Features - Shell and tube heat exchanger MaterialGraphite Heat exchangercheck Horizontalcheck Heating surface4,8 m2 Tube capacity17 Ltr Max. temperature-10/165 degr.C. Shell capacity18 Ltr Max. temperature-10/60 degr.C. Shell connectionsDN100, DN80, DN40 Cover connections(2x) DN50 Information Year of construction1991 Floorspace0,6x0,6 m Total height1,35 m Weight460 KGCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedO ...

General SKU050C389 Makeunknown, manufacturer tag is missing LocationBarneveld Material Shell materialStainless steel 1.4401 (316) Tube materialStainless steel Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface1.5 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface± 1,5 m2 Number of tubes:25 Tube diameter24mm Tube length± 900mm Information Floorspace2,2x0,7 MCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicPlastic & polymersSpicesAgrochemicalsBiotechnologyRubberOther chemicalStarchFine chemicalsTea, herbs & coffeeOintmentsGene ...

General SKU071F416 MakeCarl Canzler GmbH & Co. Düren TypeSpiral heat exchanger No.5967 Year of construction1986 LocationBarneveld Material Tube materialStainless steel Pressure Vacuum possiblecheck Working pressure shell5 Bar Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface4.2 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface4,2 m2 Tube capacity31/21 Ltr (Channel A/B) Max. temperature160 Degr. C. Information Floorspace0,8x0,6 M Total height0,8 M Weight150 kgCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharm ...

General SKU050C531 MakeBarriquand Echangeurs Roanne, France TypePlatular IXA SP 2x5+6 / 3x5x160x1500 No.23297 D7 Year of construction1991 LocationBarneveld Material Shell materialMild steel Tube materialStainless steel Pressure Working pressure shell8 Bar Working pressure tubes8 Bar Main Features Shell (Material)Mild steel Tube (Material)Stainless steel Surface5.3 m2 Specified Features - Shell and tube heat exchanger Heat exchanger(1x) Heating surface5,3 m2 Tube capacity15,8 Ltr Max. temperature200 Degr. C. Shell capacity35 Ltr Information Floorspace2,2x0,7 M Total height0,6 M Weight440 KGCatalysts & fillersFeed additivesPaper & otherSolventsDiscountShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigment ...

General SKU280P436 MakeCL -THW No.2405 Year of construction1984 Mounted on legscheck Pressure Working pressure shell16.6 Bar Working pressure tubes6 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface11 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4571 (316Ti) Heat exchangercheck Horizontalcheck Heating surface11m2 Tube capacity145 Ltr U-typecheck Number of tubes:50 Tube diameter16mm Tube length(2x) 1920mm Shell capacity314 Ltr Shell diameter+/- 510mm Shell connections(2x)dia.70mm, dia.80mm, (2x)dia..60mm, Cover connections(2x)dia.80mm Information LocationBarneveld Floorspace2,5x0,8 M Total height1,6 M Weight800 KG Extra SpecificationsMin.Temp -35 degr.C. Catalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOr ...

General SKU309N517 LocationBarneveld MakeFalk Gmbh & Co KG Bendorf No.3301 Pressure Working pressure shell2.5 Bar Working pressure tubes6 Bar Main Features Shell (Material)Mild steel Tube (Material)Mild steel Surface81.3 m2 Specified Features - Shell and tube heat exchanger MaterialMild steel Heat exchangercheck Heating surface81,3 m2 Tube capacity525 Ltr Number of tubes:126 Tube diameter25mm Tube length3900mm Max. temperature100 gr.C. Shell capacity1140 Ltr Shell connections(2x( dia.150mm Cover connections(2x) dia.100mm Information Year of construction2007 Floorspace5,5x0,9 M Weight2170 KG Extra SpecificationsThe material of the shell and tubes are 1.0345 (P235GH) Catalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarLubricants & oleoDairyAnim ...

General SKUR0875 MakeApaco AG (CH) TypeAW300-2600/20-98 LocationBarneveld Pressure Vacuum possiblecheck Working pressure shell6 Bar Working pressure tubes3.2 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface16 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4435 (316L) Heat exchangercheck Verticalcheck Heating surface16 m2 Tube capacity105 Ltr U-typecheck Tube length2500mm Max. temperature165 degr.C. Shell capacity140 Ltr Shell diameter323,9mm Shell length3200mm Wall thickness shell3,2mm Max. temperature5 / 165 degr.C. Shell connectionsDN200 (1x), DN80 (1), DN50 (2x) Cover connectionsDN 50 Information No.503532/3 Year of construction1985 Floorspace0,6x0,6 M Total height3,4 M Weight420 KgCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube ...

General SKUR0873 MakeJaeggi Guentner AG (CH) LocationBarneveld Type36,2 m2 Pressure Working pressure shell6 Bar Working pressure tubes10 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface36.2 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4435 (316L) Heat exchangercheck Horizontalcheck Heating surface36.2 m2 Tube capacity164 ltr U-typecheck Number of tubes:120 Tube diameter16 Tube length3300 mm Wall thickness tubes1mm Max. temperature-30/200 Degr.C Shell capacity206 ltr Shell diameter406,4 mm Shell length2964 mm Wall thickness shell4 mm Max. temperature-30/200 Degr.C Shell connectionsDN656 (2x), DN15 (1x) Cover connectionsDN100 (2x) Information No.2613 Year of construction1996 Mounted on legscheck Floorspace3,7x0,6 m Total height1,3 m Weight750 kg Catalysts & fillersFeed additives ...

General SKUR0880 MakeApaco AG (CH) TypeAW300-2000/20-98 No.503531/1 Year of construction1985 LocationBarneveld Pressure Working pressure shell6 Bar Working pressure tubes3.2 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface12 m2 Specified Features - Shell and tube heat exchanger MaterialStainless steel 1.4435 (316L) Heat exchangercheck Verticalcheck Heating surface12 m2 Tube capacity95 ltr. Max. temperature165 degr.C. Shell capacity110 ltr. Shell diameter323,9mm Shell length2700mm Wall thickness shell3,2mm Max. temperature100 degr.C. Shell connectionsDN200 (1x), DN80 (1x), DN50 (2x) Cover connectionsDN50 (1x) Information Floorspace0,7x0,7 M Total height2,8 M Weight350 KGCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other pharmaceutics ...

Key data: 300 mm, 1130 mm, 300 mm

4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, - 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, - 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

Key data: 300 mm, 1130 mm, 300 mm

4 Spindle High Speed Train Milling Machine, ANGER, HCP 10/5, 2005 Control : NUM, very few operating hours. Methods: X-300, Y-1130, Z-300, - 4-axis +/- 180 degrees 4 high frequency spindles : Precise 60000 / 160000 / 18000 / 16000 rpm , rpm Tool holder : Collets depending on the spindle Chip conveyor, ATC, recooling unit, external measuring system Renishaw Power consumption 41 kw

A complete layer palletizing system IW-Anlagentechnik with a pallet wrapper Tosa and pusher technology is available. Process chain: product infeed-layer formation-palletizing-transport-wrapping. 1) Palletizing system IW-Anlagentechnik PMS 120, year of construction: 1992, rotating unit: 90°. 2) Conveyor technology Transpak. 3) Rotary ring stretch wrapper Tosa 124E, year of construction: 2010. The system was used in the food industry for palletizing bottles and other liquid containers. Documentation available. An on-site inspection is possible.

Key data: 1600 mm, 800 mm, 650 mm

CNC bed milling machine with Heidenhain control 415, good condition, hydraulic tool clamping, coolant device, central lubrication, lighting,.. Travel X1600/y800/z650/ Spindle holder SK 50 Spin elder speed 60-1800rpm Working feed rate 10-3000mm/min Rapid traverse 10m/min Table clamping surface 1800x610mm Machine weight 9500kg Table load 3000kg

Measurement principle: dynamic light scattering (DLS) Measuring range: 0.3 nm to 10 μm (particle diameter) Measurement angles: 15°, 90°, 175°, Multi-angle particle sizing (MAPS) Min. concentration: 0.1 mg/mL (lysozyme) lower than 0.0001% (0.1 ppm, Latex 100nm) Max Concentration: 50% w/v (sample-dependent) Min sample volume: 12 μL Accuracy: Better than +/- 2% on NIST traceable standards Repeatability: Better than +/-2% on NIST traceable standards Currency: MYR PIC: - Dr. Wong Sze Ting (013 939 6151/ wongsttopglove.com.my) - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my)

General SKU214W146 MakeQVF GLASTECHNIK LocationBarneveld TypeROB DN 100, 0,5m² Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell2 Bar Working pressure tubes3 Bar Main Features Shell (Material)glass Tube (Material)Graphite Surface0.5 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Horizontalcheck Heating surface0,5 m² Tube capacity3 Ltr. Number of tubes:11 Tube diameter14 mm Tube length1200 mm Max. temperature150 °C Shell capacity7 Ltr. Shell diameterDN100 Shell length1425 mm Max. temperature150 °C Shell with expansion jointcheck Shell connectionsDN80 (2x), DN50 Cover connectionsDN50 (2x) MaterialBorosilicate Glass 3.3, Graphite, Stainless steel 1.4301 (304) Information No.98066 A Year of construction1998 Floorspace0,2x1,4 m Total height0,2 m Extra Specifications- SIC better heat transfer coe ...

- Weight: 1977 kg - Power: 13.4 kW - Diesel engine - Year of manufacture: 2014 - Operating hours: 1537 - L / W / H: 3.855 x 1.3 x 2.29 m - Trailer - including 3 buckets

Year of construction 2014 Operating hours 860 hrs Weight 1795 kg 3 cyl. Kubota diesel engine 16 hp Displacement 898cc Cabin with heating Hammer hydraulics 2x Backhoe bucket Trailers

General SKUR1308 MakeAnhydro TypeSFP-59 (Spin Flash Dryer) No.E-866.219C Year of construction2006 Mounted on framecheck Main Features MaterialStainless steel Motor18.5 KW Inlet diameter400 mm Specified Features - Spray dryer Spray dryerSpin Flash Dryer Drying tower dia.800 mm Cylindrical height± 2200 mm OutletDN 315 Motor11 kW 380-400-415/660-690 Volt Evaporation capacity347 kg/h (water) Air heating (gas)check With fancheck (2x) Capacity1: 3154 m³/h: 2: 6000 m³/h Motor1: 11 kW: 2: 18,5 kW MaterialStainless steel 1.4301 (304) Information LocationBarneveld Floorspace2,1x2,1 m Total height4,5 m Extra Specificationswith: - feed vat Ø1000 mm, motor: 11kW 1500 rpm, RECONDITIONED Spray dryersReconditionedAnhydroDryers > Spray dryersReconditionedBrand > Anhydro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new ...

Caterpillar 301.6 from 2019 including trailer. Operating weight: 1,925 kg Hours: 478 hours Digging depth: 2.54 m Engine power: 15.7 kW / 21 hp Hydraulically extendable chassis Air conditioning Floating position dozer blade Radio Bluetooth 2 Travel speeds Quick coupler included Hydraulic Swivel Bucket 2 backhoe buckets Certificate of Conformity (COC) Service Booklet (DTR)

Overview  This complete filling line was designed for NRW and Euro bottles as well as crates and pallets and offers an output of up to 7,500 bottles per hour. The machines are from different years of construction between 1992 and 2022 and have few operating hours. The line is still in operation until the end of May and can be viewed in person. Technical details Output: Up to 7,500 bottles/hour Bottle formats processed: 0.33L & 0.5L (NRW, Euro, Ale) Crate formats processed: NRW and Euro crates Scope of delivery Palletizer | Flema | Star C-LC | 1996 (500 crates/h) Decapper/decapper | ADELSKI | PPE 2005 | 1995 (2,000-12,500 bph, 8,500 operating hours) Bottle washer | PAC | CB 14-0.5l-R-7 LII Compact | 1998 (7,500 bph, 14,175 operating hours) Filler | ICS | multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 | 2011 (6,000 bph, 7,200 operating hours) Labeling machine | ANKER | Roland 8/3 | 1998 (7,0 ...

x-travel:6.300 mm y-travel:2.000 mm z-travel:2.700 mm tool taper:ISO 50 surface area:7.000 x 3.000 mm turning speed range:60 - 4.000 U/min power capacity:22/30 kW feeds:0 - 10.000 mm/min rapid traverse:20.000 mm/min Tool changer:80 max. workpiece weight:8.000 kg Plate clamping area 7,000 x 3,000 mm CNC rotary table 1,500 mm Orthogonal milling head Deep drilling unit IKZ Paper belt filter Measuring probe

x-travel:2000 mm y-travel:1500 mm z-travel:1460 mm milling spindle motor:35/30 kW spindle taper ISO:50 spindle turning speed range:24 - 3000 U/min table surface area:1350 x 1550 mm table load:6 t feed speeds:10 - 3000 mm/min rapid speed:10 m/min total power requirement:48 kW weight of the machine ca.:24 t CNC HEIDENHAIN TNC 426 B-axis table round Horiz. and Vertikal automatic positioning Milling Head

1 set of weld-on hooks / coupling hooks / burn-on parts made of S355 steel suitable for Bobcat 114 cm attachment, various Bobcat attachments in stock (Bobcat telehandler; skid steer loader 90 cm and 114 cm)

1 set of weld-on hooks / coupling hooks / burn-on parts made of S355 steel suitable for Bobcat 114 cm attachment, various Bobcat attachments in stock (Bobcat telehandler; skid steer loader 90 cm and 114 cm)

1 set of weld-on hooks / coupling hooks / burn-on parts made of S355 steel suitable for Bobcat 114 cm attachment, various Bobcat attachments in stock (Bobcat telehandler; skid steer loader 90 cm and 114 cm)

1 set of weld-on hooks / coupling hooks / burn-on parts made of S355 steel suitable for Bobcat 114 cm attachment, various Bobcat attachments in stock (Bobcat telehandler; skid steer loader 90 cm and 114 cm)

1 set of weld-on hooks / coupling hooks / burn-on parts made of S355 steel suitable for Bobcat 114 cm attachment, various Bobcat attachments in stock (Bobcat telehandler; skid steer loader 90 cm and 114 cm)

Wet spent grain conveyor - Housing with rectangular inlet chute - Wet spent grain bunker mounted at the inlet - Flushing water discharge connection - Mounted gear motor - Non-return flap with air connection, pressure gauge and ball access hatch., Additional title: Wet spent grain conveyor, Capacity approx.: 200 kg/min, Power: 4 kW, Current: 6,98 A, Voltage: 400 V, Frequency: 50 Hz, Material: Stainless steel 1.4301, Features: Spent grain bunker; non-return valve with compressed air connection, manometer and ball access hatch

Yeast cultivation with dampable wort sterilization tank designed for an operating pressure of 2 bar and a capacity of 2.47 hl, a second heatable and coolable wort sterilization tank designed for an operating pressure of 2 bar with a capacity of 12.7 hl, and a yeast propagation tank with a capacity of 55 hl, permissible operating pressure of 2 bar and jacket cooling in the lower third (without cone). All tanks are equipped with an agitator. Also includes a CIP tank. The plant is controlled via a Steinecker control cabinet (time-controlled). The tanks are also available individually, Additional title: with switch cabinet and CIP tank, Features: 2 tanks for wort sterilization with stirring unit (approx. 2,4 hl and approx. 12,7 hl), control cabinet, 1 cylindro-conical tank with stirrig unit, CIP system

Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data Capacity: up to 20,000 bph Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB Application: Water, CSD, or other beverages in returnable glass bottles Condition: Line in good condition Availability: Immediate Status: Still installed and connected   Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2, ...

Overview  This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and used for filling carbonated water and lemonades into 1.5L PET bottles. The line has an output capacity of up to 16,000 bottles per hour. It has been regularly serviced and remains in good working order. Availability: end of August 2025. Technical data  Capacity: up to 16,000 bph (based on 1.5L PET bottles) Formats: 1.5L PET bottles (short neck and lid) Bottle material: PET Type of filler: Isobaric filler Year of manufacture: between 1999 and 2007 (various machines) Cap type: short neck Type of label: OPP (Contiroll) Scope of Delivery  1 x Blow molder CONTIFORM S16 | Krones | 2002 | incl. preform hopper & cooler Air conveyors from blowing to labeler & filler 1 x Labeler CONTIROLL | Krones | 2000 1 x Tribloc 77/88/11 ME ...

Beschikbare containers:, Available containers:, , DPX-29037 - 20FT USED 2011 silent container - €12.500,- (photo 1), DPX-29040 - 20FT NEW 2015 silent container - €15.00,- (photo 2), DPX-29046 - 20FT NEW 2015 silent container - €15.000,- (photo 3), DPX-29048 - 40FT HC NEW 2017 silent container - €18.500,- (photo 4), DPX-29049 - 40FT HC NEW 2017 silent container - €18.500,- (photo 5), DPX-29050 - 40FT HC NEW 2023 silent container - €25.000,- (photo 6), DPX-29081 - 40FT HC USED 2008 silent container - €15.000,- (photo 7); Accessories: DPX-29037 - Int. dim.: 5750x2260x2370 mm, (door height 230 & door width 220) Weight: 6.650kg, DPX-29040 - Int. dim.: 5750x2260x2370 mm, (door height 230 & door width 220) Weight: 6.650kg, DPX-29046 - Int. dim.: 5750x2260x2370 mm, (door height 230 & door w

Dont miss a drop with this impulse digital water meter, designed to accurately track your water discharge. Heres why its a must-have for your drainage installation:, Insight: With this digital water meter you have immediate insight into the amount of water you are pumping. No more guesswork, just accurate information., Easy Installation: No more hassle with complicated installations. Our digital water meter can be easily installed, so you can immediately benefit from the benefits., Dont wait any longer and choose our digital water meter today., Contact us for more information and find out how you can start measuring flow!, , = More information =, , Year of manufacture: 2024, Colour: Grey, Connector size: 4 Cardan, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerent ...

working width: 400 mm; maximum workpiece thickness: 300 mm; min. Workpiece length: 250 mm; aggregate: 2 Bürsteinheiten centrally adjustable and each with a single fine adjustment; 1. brush: methal brush, diameter 220mm; 2. brush: thynex brush granulation 80, diameter 220mm; height adjustment: handwheel; readout workpiece thickness: mechanical counter; feed speed: 4 - 12 m/min; motor power brushes: 2 x 3 kW; motor power feed: 0,37 kW; machine length: machine width: weight: In this machine, the brushes are pivotable diagonally to the feed direction, As a result, the edges are broken similar to oscillating brushes.

PRESSTATION STV1000 FOR SALE OR FOR RENT! Installation STV 1000 Year of manufacture 2016 Dimensions (length x height x width): 3360 x 1561x 1165 mm Pressing force: 300 kN Inlet opening: 1180 x1405 mm Power: 7.5 kW;

Volume: 10 m³ Cache Dimensions: (L1 x B x H) : 4.140 x 1.950 mm Landing hole 1.180 x 1.540 mm Filling hole: 925 x 1.540 mm Pressing system: horizontal compression plate Year of production 2012 Power 4 kw

For sale or for rent a presstation STV1200 with or without box Technical specifications: Equipment: STV 1200 press station Year of construction: 2009 Dimensions (length x height x width): 3,660 x 1,165 x 1,561 mm Bjbsw S E N Hsqkhkgbeww Pressing force: 320 kN Filling opening: 1,180 x 1,405 mm Pressure piston height: 600 mm Extension piston width: 1,405 mm Pressure clamping depth: 600 mm Power: 11 kW; The station features a Schott Systema+ hydraulic tank hook system! New painted We can Offer 1 or 2 Containers

PRESSTATION KBW1593 WITH SCHOTT SYSTEM FOR SALE OR RENT! Technical data: Pressing force: 33 t/330 kN; Filling opening: 1,760 x 1,885 mm; Pressing chamber opening: 1,475 x 1,880 mm; Year of production: 2009 Electrical technical parameters: Power: 5.5 kW; Electrical connection: 5 x 2.5 mm² - CEE - plug 32 A; Duration of one working stroke: 55 sec. PRESSTATION CAN WE OFFER WITH 1 OR 2 BOXES.

LIFTER SYSTEM FOR CONTAINER! FOR SALE AND RENT! Type - HKV Manufacturer - Ludden & Mennekes Year of manufacture - 2013 Fits 4-wheel MGB flat-top trailers and also 2-wheel 240-liter MGB trailers. Stationary Operates from the loading dock

Glatt LR 350 mobile elevating and tipping device for drums and containers etc, max weight load 350kg, fork length approx. 750mm, fork diameter approx. 73mm, approx 910mm gap, max. lift height approx. 1450mm from the floor.

Auction-ID: A1-44832-724

Cake cutting table for plate cakes, Fabr. Coalfish

Quantity: about 190 pieces Type: HSK63 Status: Opportunity Set including numerous HSK63 tool holders, ER collet chucks, cutter holders, face heads, boring heads, adapters, cones and various accessories, presence of mounted carbide cutters, different diameters and lengths, storage in wooden crates

Table with polishing and grinding machine and rag

Squeezers for fillings, Rademaker,