an 005 used for sale

Used machine in good condition. Available for immediate delivery. - Number of tool stations: 24 - Control: FANUC - Working area (X x Y x Z): 1.300 x 600 x 600 mm - Max. workpiece weight: 1.000 kg - Max. spindle speed: 9.000 rpm - Axes: 3 - Dimensions (long x wide x high): 3.550 x 2.568 x 2.171 mm

cutting diameter: 270 mm saw band length: 2880 x 27 mm cutting width: 0.9 mm weight of the machine ca.: 0.4 t dimensions of the machine ca.: 1.6 x 0.7 x 1.5 m Saw blades: 5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw ø:: 65 mm screw length:: 17D screw speedl:: -- U/min drive power:: 20 kW Condition: used - Specification: Twin screw plastic extruder line Overhauled 2012, consisting of: twin screw extruder make Weber DS 65 - year of construction 1982 - screw diameter: 65 mm - Screw length: 17D - Output approx.: 80 kg/h, depending on mould and melt pressure - Main motor power: 20 kW, with frequency converter - 4 cylinder zones, 8 mould zones - Degassing with filter container - Volumetric dosing Calibration table IDE ME 14/3 - Year of construction 1996 - Length: 3m - 2x vacuum pumps: 3 kW Caterpillar haul-off IDE ME 32/3 - Year of construction 1997 - Contact length: 1,200 mm - Cleat width: 160 mm - Speed: 1 - to 10 m/min - Pneumatic clamping Circular saw IDE ME 52/3 - Year of construction: 1997 - Saw blade diameter: 350 mm - Pneumatic movement and ...

Throughput depending on material type, speed, and cutting set Capacity: up to 4.000 kg/h Main motor power: 10KW / 15 KW Power supply: 380 V, 50 Hz Dimensions of the machine in cm: Width: 110 Lenght: 90 Height: 115

Electric motor Manufacturer: SSB Antriebstechnik Type: H20D-1125.04800.00-AL- 37kW As good as new The engine is in good condition Nevertheless, this is a used items, which shows signs of wear, or may have. see pictures for more details.

Electric motor Manufacturer: SSB Product number: OED-1140 Type: OED-1140.041800.00-AL-B14-S0 55 kW The engine is in good condition Nevertheless, this is a used items, which shows signs of wear, or may have. see pictures for more details.

Electric motor Manufacturer: SSB Product number: H20D-1125 Type: H20D-1125.04600.00-AL-B14-SC 37kW The engine is in good condition Nevertheless, this is a used items, which shows signs of wear, or may have. see pictures for more details.

Heavy Duty Drive Wheels - Drive Wheels with Hub Groove Wheel diameter 350 mm Wheel width 100 mm Elastik - Solid rubber on cast iron - Wheel centre Axle diameter 65 mm Hub groove width 18 mm Hub groove height 5 mm Hub length 100 mm Weight 19.4 kg 20 units in stock - new - unused - -Unit price-

The technical data are manufacturer or operator information and are therefore non-binding for us. We reserve the right to sell the goods prior to the event, our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 12,000 m² of storage space, crane capacity 70 t More than 1,000 items of accessories for your workshop If you want to sell machines, production lines or your business, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1000 kg workpiece length - max.: 6500 mm weight of the machine ca.: 600 t dimensions of the machine ca.: 120x30 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Indoor agriculture / vertical hydroponic farm, and the machines are associated with these operations. We are talking about leafy vegetables and herbs, to name a few examples: Iceberg lettuce, romaine, basil, mint, coriander, rocket etc. The machines are part of the same solution developed and manufactured by the Taiwanese company YesHealth. The machines are 2 years old. The drying machine has not been in operation for one year. Seeder, 2 kW Harvester, 8 kW Cleaning and drying machine, 20 kW Labelling machine, 300W Find more here - /

used very little (max 4000 hours) and are in excellent condition. ORC turbine of 160 kW electrical and about 700 kW thermal, Since 2001, Triogen has been developing and manufacturing systems for conversion Organic Rankine Cycle (ORC) energy conversion systems. The generator TRIOGEN ORC, which has been used in various application areas since since 2005, is similar to a steam cycle, but uses a fluid organic instead of water. Compared with steam, it allows to achieve better performance and efficiencies by exploiting sources of low-temperature heat. The Triogen ORC generator is suitable for the conversion of heat from: + Natural gas engines + Biogas engines + Landfill gas engines + Biomass + Biodiesel engines + Diesel engines + Gas from flares + Gas turbines + Process heat + Furnace heat + Any heat source >350 °C 165 kWe DI ELECTRICITY WITHOUT FUEL AND EMISSION-FREE  ...

Anton Paar ProveTec GmbH Penetrometer Type: PNR 12 Year of construction: 2022 Find more here - / Contact us at -

Makfil Andromeda 2001 + tool inserts Find more here - / Contact us at -

2017 Andritz KMPT GmbH DCF312 / 16 / 4 Andritz - Dynamic membrane filtration Dynamic Crossflow Filter cpl. with control unit Model: DCF312 / 16 / 4 Manufacturer: Andritz KMPT GmbH Year of manufacture: 2017 Condition: As good as new Description: Crossflow processes are used to separate substances that are difficult to filter. In this process, rotating ceramic discs (alternatively: polymer) generate a turbulent differential velocity. With dynamic crossflow filtration, a high degree of separation can be realised, especially with a concentration of the retentate of up to 700 mPas. Ceramic filter discs are available on the market in a wide range of pore sizes from 7 nm to 2 μm. Areas of application: - Colour extraction (e.g. pigments) - Separation of biomass - e.g. in the extraction of enzymes, proteins, proteins, polysaccharides, antibiotics - Recovery of valuable substances -  ...

1996 Theissen and Bonnitz TB 314 QSM 65 Collating machine Hersteller (Manufacturer): Theisen & Bonitz GmbH, Burscheid, Germany Masch.-Typ (Machine Type): TB 314 QSM 65 Baujahr (Year of Manufacture): 1998 U (Voltage): 3~PE 400 V, 50 Hz P (Power): 1.9 kW Find more here - / Contact us at -

Latex coating system by Brückner carpet coating system and laminating system Technical data: Max. Working width: 5200 mm The clamping machine can utilise all reserves can be used up to a clamping width of 5250 mm. Min. working width: 3400 mm for Prage 3500 mm Drive speed: 2 -. 15 m/min. Drive: Direct current motors Operating side: right Colour of the system: RAL 1.015 structure Goods transport system: vertical needle chain Length of one field: 3 m Fans per field: 2 The output of one fan: . Fan power: 7.5 kW Heating systems - per field: 2, separately above and below the web Adjustable air temperature: 50 - 250 .° C Achievable temperature spread: 160 ° at the top, 100 ° at the bottom or top 200 ° , bottom 125 ° Size of the dryer Pre-drying: 5 fields Gelling channel: 3 fields Vulcanising channel: 12 fields Production speed: 9- m/min. with the following data: P ...

Technical Data - Year of Manufacture: 08/2019 - Dimensions (LxWxH): 35x4x5 m - Total Weight: Drying approx. 7 tons, Washing approx. 9 tons - Throughput: approx. 700 kg/h aluminum shavings, approx. 1400 kg/h alloy shavings - Energy Source (Drying): Gas - Energy Source (Washing): Gas - Gas Consumption: approx. 44 m³/h - Electricity Consumption: approx. 37 kWh/h - Dimensions (LxWxH): 35x4x5 m - Electrical Data: - Nominal Voltage: 400 V - Network Frequency: 50 Hz - Control Voltage: 24 V Find more here - / Contact us at -

Lifting spindle drive Framo - Drive technology 3 units in stock Stroke 1,500 mm Adjustment force 4,000 N Lifting speed 5 mm/s -New- -Unit price- Original price today approx. € 6.300,00 net per piece

power capacity: 30 Kw volt: 400 V ampere: 52 A total power requirement: kW weight of the machine ca.: 255 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Ansaldo Year of Manufacture: 1999 Technical Data Listing Generator - Type: Three-phase synchronous generator GSCR 800Y4 - Power: 7,250 KVA - Voltage: 10,500V - Frequency: 50 Hz - Phase Number: 3 - Number of Poles: 4 - Rated Current: 398.8A - Power Factor: 0.80 - Rated Speed: 1,500 rpm - Spin Speed: 1,800 rpm - Insulation Heat Resistance Class: F - Ambient Temperature: 40°C - Moment of Inertia of the Rotor: 118.75 kgm² - Winding Connection: Star - Excitation Voltage Rating: 41.2/158.3V - Rated Excitation Current: 54.2/152.3A - Operation Mode: Continuous - Protection Class: IP 4 - Cooling Water Quantity: 660 l/min - Cooling Water Inlet Temperature: 40°C - Cooling Water Inlet Pressure: 4 bar - Air Inlet Temperature: 45°C - Bearing Type: Rolling bearing - Bearing A-side: EMZLB18-200 - Bearing B-side: EMZLQ18-200 - Min. Clearance Shaft/Bearing: 0.267mm - Max. Clearance S ...

D'Andrea TA120 Plan Boring Head SK40 S20x2 Cover Fp1 Fp2 Boring Tool Total weight 16.6 kg Lots of accessories, see pictures. Very good used condition. In original wooden crate

x-travel: 1600 mm y-travel: 920 mm z-travel: 900 mm table surface area: 1800x700 mm T-slot - distance: 120 mm Table load: 3000 kg spindle taper ISO: 50 power capacity: 22/30 kW spindle turning speed range: 60-3000 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

One-way operation: Length A 100 mm - 1240 mm Width W 80 mm - 1400 mm Length of window/lining C 60 mm - 720 mm Width of window / lining D 30 mm - 1140 mm Two-lane operation: Length A 100 mm - 1180 mm Width W 80 mm - 660 mm Length of window/lining C 60 mm - 720 mm Width window / lining D 30 mm - 530 mm

VA-10. Residual Gas Compression/Separation Stages (V 671A/B, B670) 3-stage complete system, Type SN, Built: 1990 Incl. necessary equipment, functional, part of the overall system Residual gas compression consisting of pulsation damper B674, separator B670, Tank B673, heat exchanger W672, filter B679, slop tank B675, Gas/liquid separator B661, pipelines Manufacturer: Andreas Hofer Hochdrucktechnik GmbH Technical Data: Steel sheet construction, BMG 5709/968; Find more here - / Contact us at -

SNA-03. Other and Auxiliary Systems Air Technology Systems a) 1 unit Type Wolf KG 160/9391, functional, Built: 1991 b) 1 unit Type Wolf KG 40, functional, Built: 1991 c) 1 unit Type Eichelberger NSR 315, functional, Built: 1991, Rooftop system Manufacturer: Wolf Anlagen Technik GmbH Technical Data: a) 15,400 m³/h; 10 kW; 380V; 1500 rpm; 710 Pa b) 2,400 m³/h; 0.6 kW; 380V; 1500 rpm; 300 Pa c) 3,500 m³/h; 1 kW; 380V; 1500 rpm; 450 Pa Motors: a) 71M06 SIEMENS 1MA5163 4BB; 10 kW; 380V; 1500 rpm; 50Hz, Built: 1991 b) 71M08 Loher ENCV090 SB 84A; 0.6 kW; 380V; 1500 rpm; 50Hz, Built: 1991 c) 71M07 FLENDER ENGV160 MB02A; 10 kW; 380V; 1500 rpm; 50Hz, Built: 1991 Find more here - / Contact us at -

2. Other and Auxiliary Systems SNA-06. Air Technology System, 2 units WOLF KG 100, functional, Built: 1991 Manufacturer: Wolf Anlagen Technik GmbH & CO.KG Technical Data: 6750/6050 m³/h; 15 kW; 1500 rpm; 650 Pa Motors: 65M01 Wolf UD112M; 4 kW; 380V; 1500 rpm; 50Hz, Built: 1991 65M02 Wolf UD112M; 4 kW; 380V; 1500 rpm; 50Hz, Built: 1991 65M03 Wolf UD100LB; 3 kW; 380V; 1500 rpm; 50Hz, Built: 1991 65M04 Wolf UD100LB; 3 kW; 380V; 1500 rpm; 50Hz, Built: 1991 Additionally, 2 refrigeration compressors DWM Copeland, Built: 1992 Type DMRH 750EWM/000; Capacity 26.5 m³/h; 1550 rpm Find more here - / Contact us at -

2. Other and Auxiliary Systems - SNA SNA-08. Air Technology System, 2 units Type Wolf KG 250, functional, Built: 1991 Manufacturer: Wolf Anlagen Technik GmbH Technical Data: 20250 m³/h; 10 kW; 1500 rpm; 1050 Pa Motors: 71M01 LOHER DNGW 160LB 04A; 5 kW; 380V; 1500 rpm; 50Hz, Built: 1991 71M02 LOHER DNGW 160VB 040; 5 kW; 380V; 1500 rpm; 50Hz, Built: 1991 Find more here - / Contact us at -

amount: 18 STK - for workpiece clamping on lathes, grinding machines and dividing headswith high concentricity and holding force - for workpiece clamping (bar or chuck work) in conventional conventional single-spindle lathes and CNC lathes directly in the spindle the spindle or in the collet chuck - Smooth bores are mainly used in the counter spindle of CNC lathes - Price as a set = 18 pieces The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

scoring and folding machine for integral covers. Machine for production of integral covers in two steps 1 x Petratto SAB 100 1 x Petratto SC 10 tipo 700 1 x Petratto 90 Belt feeder Antistatic device Side lay Scoring Movable control panel with touch screen Hotmelt gluing Format : 100 x 100 cm - 8 x 8 cm Max. speed : 120 m/min Max. copies/hour: 18 000 Weight : 150 to 500 g

Manufacturer: Homag, Type: 2 Achser HC 010 o.Analogeingang, Model: 2-Achser F.mini-Controller Rev, Serial number: 2-083-02-8071,

Manufacturer: Rollgang angetrieben für Lackstrasse, Working length mm: 950, Working widht mm: 1300, Total hight mm: +/- 980, Frequency converter: yes, Total hight mm: +/- 980, Engine power kW: ca.0,5, Feeding speed min-max m/min: 10-25, Working hight adjustable mm: yes, Manufacturer: Rollgang angetrieben für Lackstrasse, Working widht mm: 1300, Total hight mm: +/- 980, Roller pitch mm: 150, roller diameter: 45, Feeding speed min-max m/min: 10-25, Working widht mm: 1300,

Manufacturer: Cefla, Type: Rollgang angetrieben, Working widht mm: 135, Total hight mm: 920, Adjustable: yes, Roller pitch mm: ca.220, Stop straightedge: yes, Feeding speed min-max m/min: 3-5, Drive adjustable: yes, Working widht mm: 135, Drive power kW: ca.0,5,

Manufacturer: Venyeskob, Type: Rollbahn nicht angetrieben, Length-width mm: 980 X 1400 X 920, FREE TEXT: Maschine wird gereinigt und Lackiert,

Manufacturer: Homag, Type: Eingabeeinheit mit LCD Anzeige und Tastatur, Model: 2-083-02-7107, Serial number: 2-083-02-7208, SN number: 2-083-02-7106, Year: 1992, Year :1992

Manufacturer: Homag, Type: 2 Achser HC 010 o.Analogeingang, Model: 2-Achser F.mini-Controller Rev, Serial number: 2-083-02-8071,

Manufacturer: Heesemann, Type: Bürstenwalze Anderlon, Year: aus MFA 8, Widht of roller coater: 1400/150, Year :aus MFA 8

Manufacturer: Horstmann Antriebstechnik, Type: HD 541 Statomat, Serial number: 511114,

REF-0 ULMA SLX-305 L-SEALER WITH TR-100 SHRINK TUNNEL Automatic angular L” sealing machine with shrink tunnel. Manufacturer: ULMA. 1) Sealer model SLX 305: − Year: 2020 − Serial no.: 4515898 − 400 V / 50 Hz / 3.5 A / 3PH − Total power: 2.6 kW − Overall dimensions: 2,400 x 1,500 x 1,720 mm (LxWxH) − Maximum sealing bar dimensions (max. package dimensions): 550 x 550 x 200 mm (LxWxH) − This machine can be used not only for packaging with shrink film (when used together with the shrink tunnel), but also with non-shrink film 2) Shrink tunnel model TR 100: − Year: 2020 − Serial no.: 1511748 − 380 V / 50 Hz / 25 A / 3PH − Total power: 24 kW − Overall dimensions: 2,000 x 1,400 x 1,200 mm (LxWxH) − Chamber length: 1,335 mm − Aperture: 400 x 230 mm (WxH) Overall dimensions of the set: 4,000 x 1,500 x 1,720 mm (LxWxH)

Tom Chandley BOMK4MTU3 Oven and proofer Serial: 10837 Stainless, 15.5Kw, Three deck oven with proofer, adjustable temp and timer controls, chamber size 900mm x 700mm x 180mm, stone based, mobile, 3Ph

Key data: 37 KW, 2955 1/min

Power: 37 kW Rated Speed: 2955 1/min Weight: approx. 258 kg Price of an electric motor

x-travel: 2000 mm y-travel: 1500 mm z-travel: 1460 mm Control: Heidemhain type: TNC 426 CB mm Rotary table: 1350x1550 mm turning speeds: 10-3000 U/min spindle taper ISO: 50 Table load: 6000 kg T-slot - width: 28h7 mm T-slot - distance: 150 mm number of T-slots: 150 Feed: 10-3000 mm/min total power requirement: kW weight of the machine ca.: 24 t dimensions of the machine ca.: m B-axis 0.1-1.5 rpm Feed rate 3 rpm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours a ...

Machine name: Spiral conveyor Manufacturer: PURATEX Anlagetechnik GmbH Type: SS D 280 R / 6150 Year of Make: 2008 Speed: 28 rpm Trough width: 280 mm Conveyor length: 6150 mm Screw diameter: 240 mm Conveying / dosing of: sewage sludge or similar sludge Drive motor: 3 kW Flow rate: 3 kW Dimensions: L 6,600 x W 400 x H 1,600 mm Curb weight: 800 kg Tech. Documentation: Yes Remark: Trough made of stainless steel and spiral made of normal steel, inclination angle 22°, flow rate sewage sludge 1.5 - 2.0 m3 /h Blobyberpmgfe Etu Ref Accessories: Swivel ring (swivel) Condition: Used Price: On request

Andreas Schmid Climatic Test Chamber -40°C to +130°C Manufacturer: Andreas Schmid Type: VKT 3,000 /-40/+130 Temp. range: -40°C to +130°C Program controller: Stange SE - 502 Mains voltage: 400 V Rated current: 32 A Refrigerant: R 404 A / R 23 Year of Make: 2005 External dimensions: W 1600 x D 800 x H 2430 mm TK-16 More items - new and used - can be found in our shop! International shipping costs on request!

Andouart extruder

Original Heidelberg Zylinder manual, 0ver 60 years old in almost mint condition. No missing pages, not dirty a true rare find to addf to the missing serial equipment of your machine.

Description KEBA - ANALOG CONTROL MODULE Model: E-16-ANALOG/C Manufacturer Code: 15595

Description Three-phase suction unit with filter and receiver. Voltage: 400 V Power: 1.3 Kw Capacity: 7 L Production: 100 - 200 Kg/h New cleaning solenoid valve.

Letterpress numerators, all 9 pieces in working condition: 8 reverse; 1 forward Can ship worldwide.