an 005 used for sale

Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container -Manufacturer: Homag -Nummer: 3 pieces available -different designs -Price: per piece -Dimensions: 300/170/H190 mm -Weight: 16.8 kg

Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container -Manufacturer: Homag -Dimensions: 440/185/H240 mm -Weight: 30 kg

Measuring device, measuring device, measuring machine, -Manufacturer: Fagor, position measuring system -Type: R NCT 13-005 3071 11A -Measuring scale: up to 2030 mm -Glass scale: 2070 mm -Dimensions: 3390/355 / H230 mm -Weight: 123 kg

Hydraulic filter, filter element -Manufacturer: Hydac, filter element Betamicron OVP -Type: 2600 R 005 BN4HC -Dimension: Ø 143 x 920 mm -Weight: 6.4 kg

4/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 401 005 Price: per piece -Number: 8 available -Weight: 0.6 kg

Braking resistor, charging resistor, damping resistor, filter resistor, braking chopper -Manufacturer: SEW Eurodrive, braking resistor type BW100-005 -Item no.: 826 269 1. -Power: R=100ohm P=500W -Dimensions: 255/160/H60 mm -Weight: 1.1 kg

Sensor module, incremental encoder, encoder relay unit, encoder unit, signal converter -Manufacturer: Heidenhain, Encoder Unit -Type: EXE 605S/005-F -ID No.: 2 322-08 -Dimensions: 300/120/H55 mm -Weight: 0.8 kg

Radial piston pump, hydraulic pump -Hydraulic motor -Drive shaft: Ø 22 mm -engine bell -Coupling: Ø 200 mm -Weight: 90 kg

Radial piston pump, hydraulic pump -Hydraulic motor -Drive shaft: Ø 22 mm -Weight: 26 kg -Dimensions: 330 x 170 x 180 mm

4/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 401 005 Price: per piece -Quantity: 2 available -Weight: 0.6 kg

Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit with: 2x motors and oil cooler -2x hydraulic pumps: from Truninger type QT23-005/22-005 -per pump max. Pressure: 320 bar -per pump max. Liter output: 7.9 l/min (5 cm³/U) -1x drive: 11 kW 1460 rpm -1x drive: 5.5 kW 1460 rpm -Hydraulic filter -Hydraulic tank -Oil cooler with: fan -Dimensions: 1500/1100/H1900 mm -Weight: 845 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range without angular gear: 170-1000 rpm -Speed range with angular gear: 22.5-133 rpm -Motor: adjustable -Diameter hollow shaft: Ø 24 mm -Construction: B3/B14 angle -Number: 1 piece of motors available -Price: per piece -Dimensions: 435/200/H210 mm -Weight: 16 kg

adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range without angular gear: 170-1000 rpm -Speed range with angular gear: 22.5-133 rpm -Motor: adjustable -Hollow shaft: Ø 24 mm -Construction: B14 angle -Number: 1 piece of motors available -Price: per piece -Dimensions: 460/190/H200 mm -Weight: 17 kg

P3 Foam Cleaning for Fillers and Rinsers Pumps and valves in a stainless steel control cabinet Attached control cabinet with Siemens S7 control

Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, short-stroke cylinders, compact cylinders -Stroke: 50 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 3 pieces -Dimensions: 197/48/H48 mm -Weight: 0.75 kg/piece

MTU 8V396 TB 53 Heat Exchangers Charge Air Coolers Intercoolers 2930-12-334-9277 / 0052000675

MTU 8V396 TB 53 2930-12-334-9277 / 0052000675

Used storage heater Manufacturer Seipp Type UAGG 390- heats workpieces and ball bearings up to XXX kg With various yokes in different sizes Workbench model with swivel arm Applications: Chemical industry, steel industry, paper industry, transmission manufacturer, mechanical engineering, transport sector Voltage / Frequency / Power: 380 V / 50Hz / 35A Properties: When warming in a horizontal position, the maximum effect is achieved. Workpiece: Weight bearing max. xxx kg (other workpieces xx kg) Inner diameter 15/120 mm Outer diametermax. xxx mm Width max. xxx mm Automatic temperature: Magnetic sensor, control range 60 °C to max. 160 °C Aperture priority: Bays: Edge length 80mm, 70mm, 60mm, 40mm, 30mm, 20mm, 15mm - Induction heater - induction heater Special price

Output card TPMC PLC for Tetra Pak TBA 8 aseptic filling machine Output module TP OM16

TEMPERATURE CONTROL for 90V TBA/8 aseptic filling machine 90410-0051

SKU: 90025-0055 Power supply TPMC PLC for aseptic filling machine TBA 8

SKU: 90410-0051 Temperature controller KS 40 for e.g. TBA 8 Tetra Pak aseptic filling machine

Max 15 BAR 4KW 380 RPM Excellent condition

Manufacturer: Homag Nutsäge mit Winkelgetriebe, Type: 4-00570, Saw blade quantity: 1, Tool diameter mm: ca.160, Used: yes, Anschlussspindel mm: HSk 63, Available: sofort, FREE TEXT: HSK 63 ,

Manufacturer: Homag, Type: 4-00570, Tool diameter mm: ca.160, Used: yes, HSK 63: yes, Angle saw: yes, FREE TEXT: Aggregat ohne Hauben mit Tastschuh/ 9000 U/min,

Technical data according to Muller Martini

Technical data according to Muller Martini

SECOND HAND FILTER TYPE - VELO FILTER MODEL - 0057 / MATR OR11 380 VOLT THIS ITEM IS SECOND HAND AND SOLD AS SEEN For more information and more available stock please visit us at - advancedbrewing.co.uk

Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit: you can rebate, groove and profile -with keying: from 2 sides each -Milling unit: swiveling -1x engines Perske -Power kW -Voltage: volts -Frequency: Hz -Speed: rpm -Other engines with other services in stock for an additional charge -Dimensions: 650/520/H600 mm -Weight: 80 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, servo drive, drive controller -Manufacturer: Hitachi, frequency converter Drive Controller Combivert -Type: SJ200-005NFE2 -Power: 0.55 kW -Number: 1x frequency converter available -Dimensions: 120/80/H130 mm -Weight: 0.8 kg

1 set of weld-on hooks suitable for Kramer large mount

1 set of weld-on hooks suitable for Kramer large mount

NEW, 1 set of weld-on hooks / coupling hooks / burn-on parts made of S355 steel suitable for Terex TL80, Also other recordings such as Atlas, Avant, Cat, Claas, Deutz Fahr, Euro, Faucheux, Genie, Giant, Hercules/Everun, JCB, John Deere, Kramer, Liebherr, Mailleux, Merlo, Mustang, New Holland, Paus, Schäffer, SMS, Volvo, Weidemann, Zettelmeyer available!

NEW, 1 set of weld-on hooks / coupling hooks / weld-on parts suitable for JCB 520-50 attachment

NEW, 1 set of weld-on hooks / coupling hooks / weld-on parts suitable for JCB 520-50 attachment

NEW, 1 set of weld-on hooks / coupling hooks / weld-on parts suitable for JCB 520-50 attachment

1 set of weld-on hooks suitable for Kramer large mount

1 set of weld-on hooks suitable for Kramer large mount

We sell a large batch of used Konica Minolta and OKI copiers and printers. All equipment comes from lease return or insolvency. The equipment was included in the maintenance contract during the lease. The devices are functional and on all devices there is a test printout with all meter information. Mixed lot: 3x Konica Minolta Bizhub C3100p, 12x Oki ES 4132, 3x Oki ES 5112, 2x Oki ES 7131, 3x Oki ES 4192MFP, 6x Oki ES 5462MFP, 4x Oki ES 5431, 7x Oki ES 8473MFP. We are happy to send meter readings and photos. The sale takes place from our warehouse in Dachau near Munich. Prices are EXW. Please understand that we only sell the entire lot or mixed packages of at least 10x pieces. Invoicing with VAT statement.

Dowel - Anchor, cavity anchor -Anchor: Ø 4 mm -Anchor length: 210 mm -incl. dowel: Ø 8 mm -Quantity per package: 250 pieces -Building authority-approved air gap anchors according to DIN: 1053 -(Material No. 1.4571/1.4401 ) -Dowel: (Ultramid B3S ) -Number of packages: 60 -Price: per package -Weight 6.5 kg/piece

1 set of weld-on hooks suitable for Kramer large mount

1 set of weld-on hooks suitable for Kramer large mount

1 set of weld-on hooks suitable for Kramer large mount

Anthracite grade AO size of pieces - 25-50 mm, sulfur 1% max, ash - 8% max, 6% max volatile - 3.5-4 Сalorific value - 6500-7000 kkal in Lots a 2000 MT Smaller and larger quantities can also be delivered. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire transport process is carried out at the buyer's own expense and at the buyer's own expe ...

Plant: second-hand mobile Chamber filter press Type: Rittershaus & Baldwin AEHIS 1200 Year of construction: 1991 Filter plates sizes: 1200 x 1200 mm Number of plates: filter plates: PP Thickness: Expiration: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. m ² Presses contents: approx. 3000 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Hydraulic power pack: Condition good Cylinder: no leaks, Rod blank-good condition Eccentric screw pump: as before priming pump Eccentric pump: EH2 type Bornemann 1900 Piston diaphragm pump: a pump Piston diaphragm pump: Type SP535N, Emmerich Wear parts: piston diaphragm pump replaced (proof of purchase. E installation: 2007 full service check (proof of purchase. Electrical connection: 125 amp input. Electrical connection: various outputs for external devices i ...

NEW ex works semi-automatic chamfering machine Development and production in England - automatic chuck with material sensor - Automatic spindle start when the cutting head is moved - Max. speed 1,500 rpm - max. rod diameter 80 mm - Adjustable bar flag - max. chamfering/turning length 37 mm - Incl. turning and chamfering tool - Precision three-jaw chuck - large chip collection container for easy cleaning - easy to move with pallet trucks - Weight 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE - certified OPTION: - Oil cooling (fog) € 1.850,- - adjustable stop + universal chamfering tool € 1.650,-

CP 2000, ANICOLOR, LACKUNIT, NP

automatic meat ball and fishball forming machine, beef balls, pork balls, fish balls, squid balls, 400-600kgs hour, 18-35mm diameter, stainless mobile frame, 3Ph

Producer: H & K Model: CIP system Capacity: 1500 l Year of construction: 1983 The tank is equipped with a liquid manometer.