an 005 used for sale

Description: Composed of: N°5 PROFIBUS SLAVE AB 7000C and No. 2 AB 9001B Approx. Onsite Dimension. (l x w x h): 250 x 250 x 1,300 mm, weight approx.: 5 kg

Description: Serial number: FBZ-8882 Operating voltage: 380 V Frequency: 50 Hz Rated current: 60 A Connection: 40 kW Control: HEIDENHAIN TNC 407 Tool holder: SK 50 Travel distances: X: 2500 mm Y: 800 mm Z: 815 mm Table clamping surface: 2900 x 800 mm Distance from floor to top edge of table: 950 mm Table surface with 5 T-sLot width/spacing: 22H12/150 mm Center groove: 22H7 SPECIAL FEATURE: max. table load without weight limit! Distance spindle nose - table surface min./max.: 0 - 817 mm Distance spindle center - table start: 235 mm Distance spindle center - table end: 935 mm Universal head position: 90° Distance spindle center - table surface: min. 200 mm, max. 1100 mm Horizontal position: 0° Distance spindle center/table surface min./max.: 0 - 900 mm Distance spindle nose/start of table: 150 mm Distance spindle nose/table end: 820 mm Horizontal position: 180° Distance spindle center/t ...

Manufacturer: Manesty Model: Accela-cota 150 Year : 1983 Type: film and sugar coating unit Technical file available Classification: ATEX EEx (to be requalified) Coater Useful volume: approx. 170 L Maximum weight: 150 Kg Diameter of drum: 1219 mm / 48. Rotation speed: 2.5 - 15 rpm Cabinet with frequency converter Air treatment unit Air volume: 2890 m3/h Temperature : 0-80?C Steam pressure : 2 - 5 bars Steam consumption : 145 kg/h Fan motor power : 0.75 KW Fan (not original) Power : 17,5 KW

Description: serial number: QC19J018 power: 5.3kW Approx. Onsite Dimension. (l x w x h): 2,900 x 1,700 x 1,900 mm, weight approx.: 1,350 kg

Description: IMPORTANT NOTE - ,To be collected by Friday 17 May 2024 at the very latest grinding length: 200 mm, grinding width: 31 mm, grinding height: 20 mm, table surface area l x w : 600 x 300 mm, grinding wheel turning speeds: 2,650 rpm, weight approx.: 3,200 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,800 x 2,200 mm

Description: Band saw Serial number 01/1284 Working table 850 x 735 mm Pulleys diameter 700 mm Pulleys width 50 mm Maximum cutting height: 350 mm approx. Motor power 2.2 kW - 1415 Rpm With lateral guide Guide size 360 x 100 mm Approx. Onsite Dimension. (l x w x h): 1,300 x 735 x 2,350 mm, weight approx.: 800 kg

Description: - Dovetail machine - Serial number 103502 - Total installed power 2 KW - Maximum workpiece width approx. 250 mm - Milling template with 10 notches in each zone - Distance between the notches approx. 25 mm - Motor power 1.50 KW - 8 milling spindles - 2 pneumatic clamps Approx. Onsite Dimension. (l x w x h): 1,000 x 900 x 1,000 mm, weight approx.: 300 kg

Description: On wheels With 2 vices Table top thickness approx. 110 mm weight approx.: 120 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 700 x 1,000 mm

Overview This canning machine CB50F from American Manufacturer, Pneumatic Scale Angelus was built in 2020. It has been well maintained with regular servicing and is in immaculate condition. It has been recently upgraded with Teflon hoses to the fill heads. Tech. Details Capacity - 3000 cans per hour. Can formats 330ml 440ml 500ml 560ml Can end spec - 202 CDL Dimensions (Floor) - 3121mm x 946mm Added bonus of UK and Europe wide engineering support (cost at buyer expense)

x-travel:2500 mm y-travel:900 mm z-travel:1000 mm total power requirement:40 kW table surface area:2900 x 800 mm feed speeds:10 - 6000 mm/min rapid speed:10 m/min spindle taper ISO:50 spindle speeds::60 - 3000 spindle drive:22 kW total power requirement:40 kW dimensions of the machine ca.:6,5 x 5,9 x 3,5 m Machine was refurbished and retrofit in 2012 CNC HEIDENHAIN iTNC 530 2-axis milling head 2,5° indexing toolchanger for 30 tools 4. axis SEMPUCO tbale dia. 500 mm

Table length: 5000 mm Table width: 1065 mm Longitudinal X: 4300 mm Cross Y: 1200 mm Vertical Z: 1460 mm Positions ATC: 30   CNC Brand: Heidenhain Bed type milling machineANAYAK - HVM 5000  X-Axis:               4300mm Y-Axis:               1200mm Z-Axis:               1460mm Table Length:         5000mm Table Width:          1065mm Table load:           20000 Power on spindle:     22/30kW Spindle speeds:       60 - 3000Rpm Spindle Taper:        Bt 50ISO/Bt/Mk Feed rate X-Axis:     10000mm/min. Feed rate Y-Axis:     10000mm/min. Feed rate Z-Axis:     10000mm/min. Millinghe ...

Table length: 12000 mm Table width: 1650 mm Longitudinal X: 10300 mm Cross Y: 2000 mm Vertical Z: 1800 mm Positions ATC: 30   CNC Brand: Heidenhain Bed type milling machine ANAYAK - HVM 11000  X-Axis10300 mm Y-Axis2000 mm Z-Axis1800 mm Table Length12000 mm Table Width1650 mm Table load50000 Power on spindle22/30 kW Spindle speeds60-3000 Rpm Spindle Taper50 ISO/Bt/Mk Feed rate X-Axis10000 mm/min. Feed rate Y-Axis10000 mm/min. Feed rate Z-Axis10000 mm/min. Millinghead auto-index2.5 x 2.5 ° Working hours25000 H 

Table length: 12000 mm Table width: 3300 mm Longitudinal X: 10300 mm Cross Y: 2000 mm Vertical Z: 1800 mm Positions ATC: 60   CNC Brand: Heidenhain Bed type milling machineANAYAK - HVM 11000 DUO X-Axis:               10300mm Y-Axis:               2000mm Z-Axis:               1800mm Table Length:         12000mm Table Width:          3300mm Table load:           100000 Power on spindle:     22/30kW Spindle speeds:       60 - 3000Rpm Spindle Taper:        50ISO/Bt/Mk Feed rate X-Axis:     10000mm/min. Feed rate Y-Axis:     10000mm/min. Feed rate Z-Axis:     10000mm/min. Millingh ...

Table length: 5000 mm Table width: 2130 mm Longitudinal X: 4300 mm Cross Y: 1200 mm Vertical Z: 1460 mm Positions ATC: 30   CNC Brand: Hitachi Seiki Bed type milling machine ANAYAK - HVM 5000 DUO X-Axis:               4300mm Y-Axis:               1200mm Z-Axis:               1460mm Table Length:         5000mm Table Width:          2130mm Table load:           40000 Power on spindle:     22/30kW Spindle speeds:       60 - 3000Rpm Spindle Taper:        50ISO/Bt/Mk Feed rate X-Axis:     10000mm/min. Feed rate Y-Axis:     10000mm/min. Feed rate Z-Axis:     10000mm/min. Millingh ...

Table length: 5000 mm Table width: 1000 mm Longitudinal X: 4300 mm Cross Y: 1500 mm Vertical Z: 1050 mm Positions ATC: 1   CNC Brand: Heidenhain Bed type milling machineANAYAK - HVM 5000 P MACH-ID 8506 Make: ANAYAK Type: HVM 5000 P Control: HeidenHain iTNC 530 Year: 2008 X-Axis:               4300mm Y-Axis:               1500mm Z-Axis:               1050mm Table Length:         5000mm Table Width:          1000mm Table load:           30 Power on spindle:     30kW Spindle speeds:       5000Rpm Spindle Taper:        50ISO/Bt/Mk Feed rate X-Axis:     20000mm/min. Feed rate Y-Axis:     20000 ...

OEM Pielstick PC 2-2 / PC 2.2 / PC2.2 / PC2-2 Piston ring (Compression ring 1st groove, std. 9.00 mm) - part number 02.005.0315.03 New and unused (Condition - See photos, unused, from a canceled order, stored since 2013). I have 16 pcs in stock.

OEM Pielstick PC 2-2 / PC 2.2 / PC2.2 / PC2-2 Piston ring (Copper plated compression ring, 9.00 mm) - part number 02.005.0027.02 New and unused (Condition - See photos, unused, from a canceled order, stored since 2013). I have 48 pcs in stock.

Hydraulic valve BS, BROWN & SHARPE Double A WNNNC-005-10A2 New ! Dimensions: 130 x 45 x 40 mm

Valve terminal BOSCH 5 x 0 820 005 151 magnet: 5x 1 827 414 004 24 V DC used, tested ! Dimensions: 170 x 140 x 70 mm

Pneumatic cylinder REXROTH 523-407-005-0 stroke: 25 mm rod diameter Ø 25 mm New ! Dimensions: 250 x 100 x 100 mm

Filter bag, 10 pieces VATTENSYSTEM.SE 325000-005 WO19923 fineness: 5 micron ring (sewn in): Ø 170 mm Bag length: 800 mm New ! Dimensions ( filter bag ): 800 x 170 x 170 mm Dimensions ( packaging ): 600 x 400 x 100

Screw jack, electric cylinder ATLANTA TYPE 571 91 005 stroke: 400 mm rod diameter Ø 65 mm rod diameter : Ø 25 mm Flange diameter ( for motor ): Ø 110 / 115 x 115 mm bolt circle diameter: Ø 130 mm 4x threaded hole: M8 x 1,25, Depth: 20 mm Mounting flange: 120 x 180 mm hole spacing: 35 + 35 / 140 mm hole diameter: 4x Ø 13.0 mm, 2x Ø 10.0 mm, without drive ! necessary drive power: 8.1 kW necessary drive speed: 5000 rpm used, checked ! Dimensions: 920 x 195 x 255 mm

Check valve, 2 pcs REXROTH PNEUMATIK 534 005 001 0 pmin: 3 bar pmax: 10 bar New ! Dimensions (single valve): 55 x 50 x 23 mm

Stock # 5119 Valve H50, Manufacturer: Krauss Maffei No. 6250771 00558769 used.

Filter Bag, Liquid Filter Bag, 5 pieces WOLFTECHNIK FILTERSYSTEME GmbH WFB1-0050PO-L 561355 Fineness: 50 μm ( 50 micron ) Filter area: 0.25 m² ring (sewn in): Ø 185 mm ( outer ) Length of the bag: 400 mm Material: Polypropylene, VA - Ring New ! Dimensions ( filter bag ): 400 x 185 x 185 mm Dimensions ( packaging ): 450 x 300 x 100

Splatter Protection, Spatter Protector, 14 pieces ABICOR, BINZEL 146.0054 Inner diameter: Ø 12 / 16 mm Outer diameter: Ø 20 mm Length: 21 mm Thread: M18 x 1 Material: Ceramic Other quantities on request New ! Dimensions ( Packaging ): 120 x 100 x 30 mm

Ruby ball probe, 2 pcs RENISHAW A-5003-0059 ball diameter: Ø 3 mm center switch: N EWL: 42,5 mm Bracket material: Stainless steel Overall length: 50.3 mm shaft diameter: Ø 2 mm shaft material: carbide Thread: M3 material of the stylus: Ruby New ! Dimensions ( individual package ): 77 x 14 x 14 mm

Filter HIROSS CSP005 P: 16 bar Volume: 1.8 l Dimensions: 480 x 230 x 110 mm

Glatt LR 350 mobile elevating and tipping device for drums and containers etc, max weight load 350kg, fork length approx. 750mm, fork diameter approx. 73mm, approx 910mm gap, max. lift height approx. 1450mm from the floor.

Technical data Max. diam. of external gear: 600 mm Module max.: 20 mm Module min.: 0.5 mm Table load max.: 250 kg Distance between centres (min.): 25 mm Distance between centres (max.): 500 mm Error increase: 1:: 250 1:: 500 1:: 1000 Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1000 mm Width: 1000 mm Height: 2200 mm

Digital height measuring and marking device with double column and handwheel adjustment Resolution 0.01 mm / 0.0005 inch 0 - 600mm Carbide tear tip The device comes from my private property, was used for private purposes. It is in a very good little-used condition. Original price today 605,00Euro net

Condition: like new, never used MatrixCompactor 140 All-in-one Units are designed to capture, convey, cut, collect and compact adhesive matrix and edge trim waste from all process machines. They can handle matrix and edge trim from 1 process machine and if edge trim only up to 4 process machines. Configuration of Granulator(s) is customised to the material and number of process machines. Maximum width of matrix Up to 550mm (22") Maximum air capacity 1,600 m³ / hour (940 CFM) Maximum speed 150 m / min (490 FPM) Maximum pipe size Dia. 160 mm (6") transfer Maximum suction distance Up to 10 m (32 feet) Size (LxWxH) 2.212x820x2.110 mm (6'-11" x 3'-3" x 7'-0") Weight 680 kg (1,500 lbs.) Motor fan 2,2kW (3 HP) Motor compactor 2,2kW (3 HP) Power 3 Phase, 230-460V, 50-60 Hz Sound 68-72 dB (A)

SECOND-HAND TOP AND BOTTOM CALIBRATING AND SANDING MACHINE TAGLIABUE MOD. L 600/11 - Working width mm. 600 - Useful working high 130mm - Min. thickness piece 3mm - Composition: Bottom: roller (80sh) + roller + air blower Top: roller (80sh) + roller + brush - Shoe pressers - Abrasive belts length 2620 - Vacuum device - Electrical panel - Motor 20kw - Max. working speed 24 m/min - CE rules (year 1999) - Dimensions 5300x1700mm

Clamping angle, grid plate PAGUS Clamping area: 205 x 200 x 32 mm Angle: 30° 8 rows of 8 threaded holes each: M8 x 1.25, depth: 25 mm 9 rows of 9 threaded holes each: M10 x 1.5, depth: 25 mm pitch: 20 mm mounting surface: 205 x 200 x 32 mm used, tested ! Dimensions: 205 x 200 x 145 mm

Clamping angle, grid plate PAGUS Clamping area: 205 x 200 x 32 mm Angle: 45° 8 rows of 8 threaded holes each: M8 x 1.25, depth: 25 mm 9 rows of 9 threaded holes each: M10 x 1.5, depth: 25 mm pitch: 20 mm mounting surface: 205 x 200 x 32 mm used, tested ! Dimensions: 205 x 200 x 180 mm

Clamping angle, grid plate PAGUS Clamping area: 205 x 200 x 32 mm Angle: 60° 8 rows of 8 threaded holes each: M8 x 1.25, depth: 25 mm 9 rows of 9 threaded holes each: M10 x 1.5, depth: 25 mm pitch: 20 mm mounting surface: 205 x 200 x 32 mm used, tested ! Dimensions: 205 x 200 x 198 mm

Clamping angle, grid plate PAGUS Clamping area: 310 x 200 x 32 mm Angle: 30° 8 rows of 14 threaded holes each: M8 x 1.25, depth: 25 mm 9 rows of 15 threaded holes each: M10 x 1.5, depth: 25 mm grid dimension: 20 mm mounting surface: 310 x 200 x 32 mm used, tested ! Dimensions: 310 x 200 x 145 mm

Clamping angle, grid plate PAGUS Clamping area: 310 x 200 x 32 mm Angle: 45° 8 rows of 14 threaded holes each: M8 x 1.25, depth: 25 mm 9 rows of 15 threaded holes each: M10 x 1.5, depth: 25 mm grid dimension: 20 mm mounting surface: 310 x 200 x 32 mm 2x bore: Ø 14 mm hole spacing: 100 mm used, tested ! Dimensions: 310 x 200 x 180 mm

Clamping angle, grid plate PAGUS Clamping area: 310 x 200 x 32 mm Angle: 60° 8 rows of 14 threaded holes each: M8 x 1.25, depth: 25 mm 9 rows of 15 threaded holes each: M10 x 1.5, depth: 25 mm grid dimension: 20 mm mounting surface: 310 x 200 x 32 mm 2x bore: Ø 14 mm hole spacing: 100 mm used, tested ! Dimensions: 310 x 200 x 198 mm

Cake cutting table for plate cakes, Fabr. Coalfish

Squeezers for fillings, Rademaker,

Tandem cutter rollers for cutting table

Cooling tunnel for chocolate enrobing machine, Sollich, Type KS 820

Glaze line, Type Jelly Power Pack JLC, Fabr. Boyens,

Hand pitter for plums and plums, with right- and left-handed handle

Manufacturer: Ernens Materials: Stainless steel. Nature of the cleaning fluid: liquid / water - Capacity: example with sultanas 600 to 800 kg/h - Feeding belt: 350 cm x 1500 mm - 2 compartment bowl 600 x 900 x 600 mm including : 1 inclined screw for product recovery d.150 mm 1 screw + horizontal draining drum d.300 mm - Heating by external recycling of the fluid

- Giratory

A second-hand line for milling and pressing fruit and vegetable pulp. The line consists of: - BELT PRESS TYPE B FRU 800 HK WITH CONTROL PROBE IN FEED HOPPER FLOTTWEG 2008 - FEED HOPPER MEGA 2012 - ROTARY SIEVE WITH EXTERNAL INFLUX DIA. DRUM 355MM LENGTH DRUM LENGTH 1600 MMDRUM 1600 MM MEGA (FLOTTWEG) 2012/14 - METERING RUNG ELEVATOR - BRUSH POLISHER MEGA 2008 - INSPECTION ROLLER CONVEYOR MEGA 2008 - FLOTTWEG SCREW CONVEYOR 2017 - PULP CONTAINER 400L - CENTRIFUGAL PUMP FOR PULP - 500L FLUSHING WATER TANK - CENTRIFUGAL PRESSURE PUMP - PIPES, FITTINGS, ELECTRICAL CONTROL CABINET FLOTTWEG 2008 - JUICE COOLING SYSTEM STM 2018 - TUBE BEAKER SPOMASZ 2018

Semi-automatic vegetable peeling machine FINIS Vegetable peeling machine type cylinder 80, manufacturer: FINIS together with conveyor belts - 2 pcs. , year of production 2012 year 2012