an 005 used for sale

Stop for chop saw, pull saw, stop and measuring system -Manufacturer: elumatec, stop and measuring system with digital display -Inclusion: Bosch profile -Length unit: 4280 mm -Price: complete -Dimensions: 4710/510/H635 mm -Weight: 72kg

Radio system, antenna contact component, wireless RF modem, pico cell antenna -Manufacturer: CP Technologies, Pico Cell Antenna 2.4 GHz Ovp -Type: WAN-2185 -Number: 2 antennas available -Price: per piece -Cardboard dimensions: 280/240/H85 mm -Weight: 0.7 kg

Clamping angle, clamping aid, clamping angle for workpiece clamping -Clamping angle: Clamping aid for workpiece clamping -Bridge thickness: 16/18 mm -Dimensions: 325/247/H115 mm -Weight: 13.7 kg

Clamping table, clamping angle, milling machine table -Clamping angle: for workpiece clamping -Height: approx. 500mm -Groove width: 22 mm -Dimensions: see photo techn. drawing -Number: 2x clamping angle available -Price per piece -Dimensions: 235/100/H500 mm -Weight: 8.9 kg/pc.

Screwloader Meat Analyzer CFS Multitrack TS Type Conveyors / Screws / Elevators Height 2300 Width 1800 mm Length 3000 mm Voltage Electrical: 400V 50Hz 3N Installed Power 12 kw Main material Stainlees Steel Time of realisation 2-3 weeks Working belt dimentions 400 mm

Handtmann VF 612 Filling - Portioning - Turning Off Year of construction 2009 Price on request

Clamping table, clamping angle, milling machine table -Clamping angle: for workpiece clamping -Height: approx. 500mm -Number: 1x clamping angle available -Price per piece -Dimensions: 220/100/H500 mm -Weight: 12,8 kg/pc.

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 41 mm -Groove width: 25/22 mm -Dimensions: 150/120/H218 mm -Weight: 9.7 kg

Clamping angle, clamping aid - Clamping angle for workpiece clamping -Dimensions: W/H/L 600/600/600 mm -Thickness: 28 mm -Weight: 238 kg

Type Cutters Height 1900 Width 700 mm Length 1300 mm Weight 270 kg Voltage Electrical: 400V 50Hz 3N Installed Power 11 kw Main material Stainlees Steel Cutter Type Emulsifier Knife shaft revolutions 2900 rpm

Handtmann VF 628 Filling - Portioning - Turning Off Year of construction 2009 incl. Wolf GD93-5

Clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 21 mm -Groove: 44 x 19 mm -Dimensions: 203/103/H153 mm -Weight: 6.4 kg

Gas and oil burners, oil burner filters, heating oil filters, filter and deaerator units, heating oil deaerators -Manufacturer: oilon, filter and vent unit unused, original packaging -Type: Oilon Plus -Technical data: see photo of the nameplate -Cardboard dimensions: 370/180/H150 mm -Weight: 1.8 kg

Cutting machine for small biscuits Cutting - Jack with inlet shaft Table unit made of stainless steel Performance up to approx. 2000 rolls Cutting height adjustable Pastries max. 160 x 80 mm, WxH DGUV V3 tested Connection 230V, plug-in Dimensions (WxDxH) in mm: 800 x 440 x 470 New device with 12 months warranty optional: - Driving table come to our bakery machinery warehouse!

PLC control, digital input, digital input -Manufacturer: Siemens, Simatic S7-200 digital input analog output -Type: 6ES7223-1PL22-0XA0 / 6ES7232-0HB22-0XA0 -Quantity: 4x module available -Price per piece -Dimensions: 90/180/H60 mm -Weight: 0.4 kg/pc

rack, toothed rail -Rack: Toothed rail, straight teeth -Length: 1000 mm -Width: 60 mm -Height: ha 60 mm -Module: 6 (see photo) -Dimensions: 1000/60/H60 mm -Weight: 25.1 kg

bread cutter Model: Varia Pro 800 Easy operation 200 slices/min Cutting width/bread length 380mm Circular knife machine manual operation Disc thickness adjustable from 4 - 30 mm Dimensions: 790 x 746 x 1080 mm, WxDxH Bread dimensions max: 380 x 340 x 160 mm L x D x H DGUV V3 slammed Connection 230V,1 kW New machine Visit our bakery machines park!

Handtmann VF 608 Filling - Portioning - Turning Off Year of construction 2008 Price on request

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Clamping surfaces: 300 x 160 x 20 mm / 300 x 200 x 30 mm -Dimensions: 300/160/H200 mm -Weight: 18 kg

Gears, angular gears, spur gears, transmission gears, worm gears -Manufacturer: Vogel, angular gear type K 1 -Id. No: 200066 -Translation: i = 1.0 -Shaft: Ø 18 x 35 mm -Dimensions: 168/168/H90 mm -Weight: 5.2kg

Gearbox, bevel gear, worm gear -Manufacturer: DZ transmissioni, double bevel gear -Translation: i = 1:1 -Shafts: Ø 20 x 50 mm -Rotation direction: counter-rotating, see photo -Dimensions: 410/240/H75 mm -Weight: 7.5 kg

with feeding Filling - Portioning - Turning Off MC Control Price on request

Power bottle 10 ml, 400V / 50Hz , the line includes: a filling machine BOSCH, type FLP 3060, production 12,000 bottles / h, 6 filling stations, with self-enspirating stainless steel rotary lobe pumps, dosing accuracy +/- 0.5%, insertion of the spray pump, a vibrating machine, filling pumps available: 6 stk.C-BOSCH sealing machine for pressure closure, type VRK 4010, max production 12,000 bottles / h.

Hinge, door hinge, folding hinge, angle profile -Angle profile: Material: Aluminum, 45 pieces -Dimensions/recess: see photos / technical drawing -Price/Fee: complete Dimensions: 70/60/H35 mm -Weight: 0.05 kg/pc.

Automatic encrustation- confectionery and confectionery machine new Double filling machine with cutting rod function Standard mold size and weight: Popcorn Cookie 25g Diameter 45mm Rotating twist 50 g length 90mm Cyclone volume 30 g diameter 55mm Mochi mold 30 g directly 35mm Two-color strip cookie 40g length 60mm Moon cake 60 g directly 50mm Two-color cookie 30g diameter 40mm Encapsulated cookie 30g diameter 40mm Cwjbewkq Pick up from 14547 Beelitz or shipping with extra shipping costs for more info please send email or by Whatsapp 00491605664856

Angle connectors, angle connectors with web, heavy-duty angle connectors, perforated plate angles, perforated angles -Manufacturer: GH, angle connector with web 29 pieces -Type: GH-WVB 105x105x90x2.0mm -Price/Delivery: complete -Weight: 0.3 kg/piece

Banding system ATS US 2000 AB Cornerline; good condition; serviced and tested by ATS customer service; bandwidth 30mm; frame size 360x160mm; Min. Product width 80mm, max.165mm; Max. Product length 270mm; Max. Produnkt height 110mm; Compressed air required. Ultra sonic banding machine ATS US 2000 AB Cornerline; good condition; cleaned and checked by the support of ATS Germany; band width 30mm; frame size 360x160mm; min. product width 80mm, max.165mm; max.product lenght 270mm; product hight 110mm; pressure air needed.

Angle connectors, angle connectors with web, heavy-duty angle connectors, perforated plate angles, perforated angles, wood connectors -Manufacturer: GH, angle connector with web 27 pieces -Type: GH-WVB 90/100S 100x100x90x3 mm -Price/Delivery: complete -Weight: 0.4 kg/piece

Wet acceptance system, swimming / sinking system, swimming / sink container with discharge belt, belt scrubber, belt washing machine for fruit and vegetables used Manufacturer: SCHNEIDER Maschinentechnik Type NA 650 Filling height approx. 2 m Funnel approx. 2.4 x 1.9 m Depth to the band approx. 1.2 m Bandwidth approx. 600 mm Drive via infinitely variable gear motor Total dimensions: approx. 4 x 2.1 x 3.1 m The plant was used in fruit and vegetable production. Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Machine details Stock number 1105-03330 Machine type guide and pull spindle lathe Make ERNAULT-SOMUA Type Cholet 550 Year of construction 1990 Control type conventional Storage location FRANCE Country of origin France Delivery time immediately Freight base EX WORK price Technical details Turning diameter over bed 550 mm Turning diameter via support 500 mm Turning length 1100 mm Tip height 250 mm Spindle bore 52 mm Inner cone 136 Spindle speeds 32-1800 rpm Feeds - bed slide / lengthwise 0.05-07 mm/w Feeds flat slide 0.033-0.45 mm/min Total power requirement 13 kW Weight of the machine ca. 2,3 t Space requirement approx. 2870 x 940 x 1400 m Information accessories: PARAT steel holder 4 STUCK 3 bake lining dia 250mm 2 AXIS DIGITAL

Angle connectors, angle connectors with web, heavy-duty angle connectors, perforated plate angles, perforated angles, wood connectors -Manufacturer: GH, angle connector 19 pieces -Type: GH-WVB 90/100S 100x100x90x2 mm -Price/Delivery: complete -Weight: 0.2 kg/piece

Technical data: Bandwidth / strip width min. 150mm Bandwidth / strip width max. 1,650 mm Strip thickness min. 0.4 mm Strip thickness max. 400 N/mm² 2.5 mm 300 N/mm² 3.0 mm Coil weight decoiler/ coil weight decoiler 12,000 kg Coil outer Ø / coil outer-Ø 1,600 mm

Maximum diameter to turn on the bench 2,110 mm Maximum diameter to turn on trolley 1,600 mm Maximum distance between platforms 12,830 mm Spindle hole diameter 155 mm Cone on spindle no. 120 metric Cone on spindle (with reduction) no. 6 clamps Cone on the counterpoint (6-bit reduction) no. 120 metrics Maximum stroke of the counterpoint 400 mm DSeed from the tool support plane to the axis of the 80 mm centers Main engine power 100 HP Spindle speed from 0.9 to 90 rpm with continuous variation Longitudinal feed no. 36: 0.2 to 12.8 Transverse advances No. 36: 0.1 to 6.6 Metric fillets #26: 1 to 42 Whitwoth fillets #17: 0.5 to 11 Quick forwards Maximum permissible load on the tips 50-60 ton Refrigerant liquid system

Peak height 2,600 mm Point distance 10,000 mm Closed bench 2,000x6,000 mm To be completed with CNC

Max length 8,000 mm Maximum turning diameter above wagon 1,250 mm Max vault over guides 1,650 mm Maximum turning diameter under spindle 2,000x700 mm Displayed – two axes

try square, locksmith square, hair square, precision hair square -Manufacturer: USSR, stop angle 1000 x 633 -Type: ROCT 3749-65 -Dimensions: 1000/633/33 mm -Weight: 12.4 kg

IN THE RETROFITTING PHASE Height tips 900 mm Point distance 7,000 mm Turnerable diameter on the bench 1,850 mm Turnerable diameter on trolley 1,350 mm Turnerable diameter on recess 2,150 mm Bench width 1,000 mm Bar passage diameter 206 mm ASA A1 15" spindle attachment Top speed 300 RPM Diameter of the tank counterpoint 220 mm Row stroke counterpoint 450 mm Withworth threads - metrics - diametrics - module Weight allowed between tips without lunettes 15 ton Weight allowed between tips with a 20-ton bezel

clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 25 mm -Groove: 55 x 15 mm -Dimensions: 200/150/H150 mm -Weight: 9.9 kg

Height tips 220 mm Useful length 1,000 mm 42 mm bar pass

Equipped with no. 03 guides Overhauled with: guide grinding, CN conversion, new electrical and hydraulic system, hydraulic self-centering installation, shaving conveyor; CN Fagor 8055 Numerical Control – BT Maximum turnerable diameter 1800 mm 3-grife hydraulic self-centering with a diameter of 1450 mm with tightening force 30 Ton with 30 bar clamp L max turnerable 3000 mm Spindle engine power 110 Kw Maximum rotation speed 180 rpm Fast value axles 4000 mm/min M3/M4 Spindle Rotation Inversion Possibility 4 speed ranges Hydraulic counterpoint Maximum capacity of workpiece on counterpoint 12500 Kg It is currently possible to work details of up to 3000 mm length but the extension pallet is available to be able to work details up to 8 m in length. (un revised); Machine installed and working

Maximum turnerable diameter: 1040 mm Turning diameter above the wagon: 620 mm Maximum workable length: 5200 mm Spindle power: 40 kW CNC ECS Optical line measurement system Maximum flow between tips: 10 tons Machine complete with chip evacuator, 4-position hydraulic turret, safety shelters in compliance and spindle 3-jaw hydraulic self-centering AUTOBLOCK; Various accessories available (tool case, stretchers, lunettes...) EC 2018 remarking possibility

Platò diameter: 1300 mm Used lathe in good condition, available unless sold.

peak heights: 250 mm point distance: 1500 mm bar pass: 105 mm

Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter)

Try square, locksmithsquare, hair square, precision hair square -Stop angle: leg length 600 x 300 mm -Dimensions: 605/300/H40 mm -Weight: 2.8 kg

Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder -Holder: for pull and lead screw -Dimensions: see photos -Transport dimensions: 160/120/H400 mm -Weight: 14.7 kg

Code 2841 Description Centerlathe Make Graziano Model SAG 12 Serial No. SAG 12 N 4475 Year 1976 Distance between centers 800 mm Swing over bed 320 mm Swing over gap 420 mm Swing over crossslide 176 mm Spindle bore 41 mm Number of spindle speeds 8 Spindle speeds 75-2000 rpm Feeds Longitude and cross Motor power 2 and 3 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries 3 chuck Condition Machine is in normal condition.

Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder -Holder: for pull and lead screw -Dimensions: see photos -Transport dimensions: 105/155/H450 mm -Weight: 11.3 kg

Code 2876 Description Centerlathe Make Graziano Model SAG 12 Serial No. SAG 12 N 5150 Year 1980 Distance between centers 800 mm Swing over bed 320 mm Swing over gap 420 mm Swing over crossslide 176 mm Spindle bore 41 mm Number of spindle speeds 8 Spindle speeds 75-2000 rpm Feeds Longitude and cross Motor power 2 and 3 kW – 380 Volts Thread cutting Metric, W.W., Modul and D.P. Accessoiries 3 chuck Steadies Rapid toolpost Condition Machine is in normal condition.

Main technical data: - Tip distance: 6000 mm - Tip height: 640 mm - Lathe complete with spindle, tailstock and tool turret