an 005 used for sale

Clamping angle for workpiece clamping, measuring device -Dimensions: 400/350/H230 mm -Thickness: 35 mm -Groove: 15 mm -Surface: milled -Weight: 48 kg

Filter roll, separating and filter fleece, 2 rolls -Manufacturer: POLO -Type: 360 -Number: 2x rolls available -Price/Sale: complete -Dimensions: 500 mm -Weight: 20 kg

Antenna cable, extension cable -Manufacturer: Bad Blankenburg -Type: AZ118LL -Length: 4 m -Number: 39 cables available -Price: per piece -Minimum order quantity: 3 pieces -Weight: 0.18 kg/piece

Manufacturer: NERAK Type: WB 370 Built in 2003 CC-foot 2160 mm CC-Vertical 9600 mm CC head 3110 mm Plastic cup approx. 36 cm wide 20 cm deep approx. 10 cups per m Rubber block chain Speed: 0.3 m/s Power 5-10 m3/h (bulk density 0.5-1.0 t/m3) User manual and technical drawings available

According to description pdf attached complete line for profiles + WPC profiles

Clamping plate, welding table, welding table, straightening plate, clamping cube, clamping tower, clamping box -Width: 200mm -Length: 503mm -Height: 150mm -Plate thickness: mm -Hole diameter: 26mm -Dimensions: 503/200/H150 mm -Weight: 28kg

Clamping angle for workpiece clamping -Dimensions: 151/391/H191 mm -Thickness: 18 mm -Surface: milled -Weight: 16 kg

Extruding system with cross-spray head for sheathing of small profiles/filaments consisting of: 30 mm extruder with tool, water bath, extractor and winder Optional with memory for role change

For sale we offer a measuring and weighing system for packages from Bedal. It is a perfect system for all package acceptance or shipping. It can be used for example.B: In shipping at industry, wholesale or e-commerce, fulfillment service providers (e..B. forwarding agents, logistics), or at parcel reception points (e.B. courier services). Package dimensions: Min. BxWxH 10x10x4 cm Max. BxWxH 43x41x48 cm undressed max: LxWxH 75x41x48 cm Tolerance: LxWxH 1.0 x0.5 x 0.5cm Weight: 0.25kg: 0.05Kg (50g) / 25-32kg : 0.075kg (75g) Parcel Kiosk is an economical solution for weighing and dimensioning packages. It is certified by the international organization OIML. Automating packet measurement improves efficiency and saves resources. Thanks to the Parcel Kiosk system, you can be sure that accurate weight and dimensions are read and that your company is protected from errors an ...

Reconditioned Hotmelt Slot Nozzle machine for coating and laminating of various substrates. Winding/Unwinding on request. Overhauled, new Hotmelt slot nozzles - coating and laminating system. Up- and downwinding systems on request.

Detrunking machines used for cabbage and herb Manufacturer: TURATTI Type 1507-03 Built: 1998 VA stainless steel Dimensions: approx. 4200 x 1200 x 2100 mm

Angle flange, flange, cable entry, cable protection -Nominal width: 48 mm -Protection type: IP 66 -universal: applicable -Packaging unit: 10 pieces -Price: per packaging unit -46x bags: 10 pieces each -Dimensions: -Weight: 1 kg/piece

Reconditioned powder scatter coating and laminating line for thermoplastic powders. Working width 2 x 000 mm. New powder-spreading system for coating and lamination by means of thermoplastic powders. Working width 2 x 000 mm.

bundle sizes from 30 x 12 x 50mm up to 350 x 200 x 200mm (minimum individual carton size 15 x 12 x 50mm), output up to 50 bundles per minute. Includes infeed and outfeed conveyors.

SCM fs41 elite Dressing thickness planer Planing width 410mm with 4 TERSA planer knives Two feed speeds 6 and 12m/1 400 V 3KW (4 hp ) S1 100% Dressing table length 2000mm Max chip removal of 5mm Planing shaft D=90mm Work tables made of grey cast iron Table adjustment with numerical display Pass-through height 3-230mm Slanted geared steel feed roller Breaking stop with precise round rod guide 90-45° Suction nozzle 120mm

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Connection: 565 x 310 mm -Connection: Ø 500 mm -Material: sheet steel -Dimensions: 870/650/H650 mm -Weight: 38 kg

Angles for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Connection: 550 x 450 mm -Connection: Ø 515 mm -Material: Steel sheet -Number: 2x angles available -Price: per piece -Dimensions: 900/600/H610 mm -Weight: 22 kg

Give. Angular handpiece with collet for key tension, wear-resistant cast housing, ball bearing, bevel gear, grease lubricated. Equipped with 6mm collet

Type New Bowl choppers Height 1750 Width 2250 mm Length 2000 mm Weight 3100 kg Capacity 120 l Voltage Electrical: 400V 50Hz 3N Installed Power 52 kw Main material Stainlees Steel

Angles for filter systems, chip extraction, dust extraction, extraction systems, ventilation ducts and fittings -Connection: 550 x 450 mm -Connection: Ø 560 mm -Material: Steel sheet -Dimensions: 1600/660/H800 mm -Weight: 38 kg

Gearboxes, angular gearboxes, stin gearboxes, angular gearboxes, transmission gears -Translation: 1:2 -Drive shaft: Ø 20 mm -Dimensions: 190/190/H110 mm -Weight: 11.7 kg

Angular cup unit, elevator, continuous conveyor used Manufacturer: GOUGH ENGENEERING Height approx. 7 m Shaft approx. 750 x 620 mm Plastic chain Plastic cups approx. 450 x 200 x 120 mm Gearmotor Bauer 0.75 kW 27 rpm Thanks to our own special machine construction, changes are also possible according to your wishes. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale. Search terms: Becherlevator, Becherwerk, Winkelbecherwerk

Clamping angle for workpiece clamping -Dimensions: 210/160/H200 mm -Clamping width: 40 mm -Surface: milled -Weight: 6 kg

Tube filling and sealing machine for PE, laminate and metal tubes Power up to 3,700 tubes /hr depending on

Clamping table, clamping angle, milling machine table -Clamping angle: for workpiece clamping -Table surface: 995 x 197 mm, height 995 mm -Wall thickness: 39 mm -Bores: M20 -Clamping grooves: 172 x 21 mm -Dimensions: 995/197 / H995 mm -Weight: 160 kg

The machine is equipped with smart blade oiling system for slicing wholemeal bread. 7.5 kW SEW motor; 2 belts: conveying and tightening (mechanically adjustable); 2 side belts adjusted manually with a pointer scale; easily replaceable blade system; frame painted RAL 9007 (aluminium grey); efficiency depends on the consistence and size of the product; slicer’s speed: up to 4000 pcs/h; voltage: 400 V, 50 Hz, 3-phase: Compressed air 6 bar: length: 2500 mm, width: 1100 mm, height: 2150 mm; weight: approx. 1100 kg used, working condition Slicer for extra heavy bread

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 705 x 490 mm, height 695 mm -Wall thickness: 25 mm -Clamping slots: 70 x 20 mm -Dimensions: 705/490/H695 mm -Weight: 187 kg

Power: 105 kW Mains voltage: 400 V Frequency: 50 Hz Speed: 1500 rpm Generator: Marelli MJB 250 MA4, 165 kVA Engine hours: Approx. 60000 Turbocharger is new, generator was renewed in 2019 As a replacement unit, the unit has a water damage: Liebherr DITOM TBG 926 Built: 1999 Subject to prior sale - Errors possible

Clamping angle with T-slots Size 1600x1250x1000 mm and 1250x1000x750 mm

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 252 x 145 mm, height 148 mm -Wall thickness: 25 mm -Mounting grooves: 45 x 16 mm / 64 x 17 mm -Bore: Ø 33 mm -Dimensions: 252/145/H148 mm -Weight: 9.3 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog module, analog output -Manufacturer: Siemens Simatic analog output ovp -Type: 6ES5470-4UB12 -Cardboard dimensions: 270/220/H30 mm -Weight: 0.6 kg

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog module, analog output -Manufacturer: Siemens, Simatic S5 analog output -Type: 6ES5 470-8MB11 -Number: 1x module available -Price per piece -Dimensions: 100/45/H135 mm -Weight: 0.2 kg/pc.

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog module, analog output -Manufacturer: Siemens, Simatic S5 analog output -Type: 6ES5 470-8MB12 -Number: 1x module available -Price per piece -Dimensions: 100/45/H135 mm -Weight: 0.2 kg/pc.

Various control units for video and audio systems consisting of: 5 pieces Extron Amplifier XPA - two channels 100 W 1 piece Extron SW VGA - VGA/Audio Switcher 4 pieces Extron MLG 228 - media control units 1 piece FURMAN PS-SRE Series II Power Contioner + Sequencer 3 Pieces Extron MP8 Series 8 Media Presentation Switcher 4 pieces Panasonic beamer PI-F200 NTE with remote control 6 pieces 19" wooden racks 10U and more 4 pieces Fohn wall speaker Only for sale as a package

Control card, output card, controller, memory module, PLC controller, expansion module, interface module, analog module, analog module, analog output -Manufacturer: Siemens, Simatic S7 analog output -Type: 6ES7 332-5HD01-OABO -Number: 1x module available -Dimensions: 115/40/H125 mm -Weight: 0.2 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping, with air connection for easy movement (air cushion) -Support surface: 1645 x 250 / 695 x 310 mm -Wall thickness: 30/35 mm -Dimensions: 1645/310/H695 mm -Weight: 239kg

Stepless guide and pull spindle lathe TC 250 V Peak height: 250 mm Circulation diameter via slide: 350 mm Orbital diameter in the croation: 695 mm Tip width: 1500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide path: 272 mm Upper slide path: 155 mm Spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth Thread: (45) 2 - 72 TPI Metric Thread: (39) 0.2 - 14 mm Diametral Thread: (21) 8 - 44 D.P.I Module Thread: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/U Flat feeds: 0.02 - 0.50 mm/U Engine power: 5.5 kW Dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg characteristics: - Toolmaker accuracy - Stepless speed control (3 pre-level steps) - Finely-balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base - Adjustable precision cone roll ...

Continuous vacuum filler for straight filling, portioning, and twisting Optional: holding and twisting device All in one 250 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Integrated lift Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 7.6 KW Machine dimensions in cm: Width: 205 Lenght: 130 Height: 210 Delivery time: 20 working days after advanced payment

Various steel sheets and wooden wagons with wheels Length 1350 - 1700 mm x width 400 - 860 mm x height 1040 - 1720 mm Price: EUR/piece 28,- net + VAT approx. 10 transport aids 1110 x 600 mm Price: EUR/piece 15,- net + VAT

Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, Router, Ethernet Security Router -Manufacturer: NetModule, WLRouter type NB1600-UW with 2 antennas -Antennas: WTG14, 114116 DM1 / WTG14, 114118 DM3 -Overall dimensions: 340/200/H135 mm -Weight: 1.1 kg

Rung and miter punch, rung punch -Manufacturer: Rammefabriken, mechanical corner punch -Intermediate dimension: 100 mm -Adjustment depth: 65 mm -Dimensions: 1700/600/H1080 mm -Weight: 118 kg

Bandwidth / strip width 1,500 mm Strip thickness / strip thickness 0.4 - 1.5/2.0 mm Number of straightening rollers / no. of straightening rolls 6 pcs./no. Number of feed rollers / no. of feeding rolls 4 pcs./no. Longitudinal shears 3 pairs Speed 20 m/min Cross shears 1,500 x 2.0 mm Straightening rolls 100 mm Foil coating on top / foil coating on top

Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve -Manufacturer: Bürkert, pneumatically operated 2/2-way angle seat valve -Type: 2000A 40.0 PTFE VA -Connection: DN40 PN16 -Dimension: 220/100/H240 mm -Weight: 2.9 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 800 x 445 mm, height 595 mm -Wall thickness: 30 mm -Grooves: 120 x 21 mm / 80 x 21 mm -Dimensions: 800/445/H595 mm -Weight: 197 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500 x 500 mm, height 500 mm -Wall thickness: 27 mm -Grooves: 80 x 26 mm -Dimensions: 500/500/H500 mm -Weight: 121 kg

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping -Table surface: 500 x 525 mm, height 500 mm -Wall thickness: 25 mm -Grooves: 175 x 30 mm -Holes: Ø 25 mm -Dimensions: 500/525/H500 mm -Weight: 124 kg

Technical data : Bandwidth / strip width 1,500 mm Strip thickness / strip thickness (420 N/mm2) 0.5 - 2.0 mm Coil weight 7,000 kg Longitudinal sections • 2 mm: 4 pcs. • 1.5 mm: 8 pcs. • 0.6 mm: 10 pcs. Shranded. / speed 20 m/min Length tolerance / length tolerance ± 0.5 mm Power / power 19.5 kW

Semi-automatic tube filling and closing machine for metaltubes including: - Tube D.35 format set - Coding device on one side - Tube feeder and tube alignment by hand

Weibert ADH 410C Abrichtdickenhobel Dressing table (LxW): 1640 x 425 mm Thick table (LxW):600 x 410 mm Working height 850 mm Thickness: 5-225 mm Max. chip acceptance 3 mm Planing shaft diameter: 70 mm Planing knife 3 Speed 5200 rpm Feed 7 m/min Engine: 3 kW 400 V 50HZ Suction nozzle diameter: 120 mm Weight 260 kg G&STÜ-5904041