an 005 used for sale

Producer: Bolz Producer: Sinks Allgau Capacity: 500 l The tank is equipped with 2 probes to measure the filling level.

Tube filling and closing machine for metall tubes. Machine comes in line with IWKA-cartoning machine, type Cartonpac CPS-R.

Preparation of crystal sugar We can offer you a complete system for dissolving and pasteurizing crystalline sugarThe device includes:-Pasteurizer KZE , producer: Schmidt, year: 1997 3-reservoir, double coat (heating-cooling) capacity of one tank: 800 l.dimensions: the height of the tank: 1100 mm, diameter: 1400 mm, total height: 2200 mm

Hotmelt lamination line BC 62 Nordson Porous coating 80cm-1675mm full line with inline printing unit 2 unwinders, 1 rewinder 1 inline printing unit Hot melt lamination Hotmelt Laminator Hot melt lamination line Hot melt lamination stand Hot melt coating stand Hot melt coating line Nordson BC 62 Porous Coating Coating weight : 0.85-60 g/m2 Web width : 2400mm bm 200 bulk melter tank , heated hoses, hot melt applicator, Metering gear pump station and coating head • Hot melt application gsm : minimum 0.87 gsm/m2 • Hot melt application gsm : maximum 60 gsm /m2 • hot melts: SIS/SBS, PSA,EVA,PUR based

For sale TWO (2) complete lines for plastic caps with molds, include: (2 pcs) CCM001 SACMI LINES with moulds for HL3 cap (Coca Cola approved high cap with Liner) Condition: Fair condition. Were Working at moment of disconnection in 2015. Origin Italy. Exworks South America 380volts 50Hz Huge Lot of Sacmi genuine spare parts.

Handtmann VF 50 with attachment FPA

with mixing and Meng arm cooling vacuum

Cutter 65 ltr. CPL. Stainless steel mixing speed

Double walls and prefabricated ceilings = 56 pallets; Length = 10 m, Width = 3m Longitudinal and longitudinal transport equipment for pallets Stacker crane for storing and retrieving pallets Curing chamber with 50 storage locations 1 tipping station at the demoulding station Stacking stations served by extension carriages Exit carriage for horizontal and vertical precast elements autom. Concrete spreader (2018) Turning device for the production of double walls Steel processing: Richt-u. Cutting machine (2006) with positioning device for the steel of a complete pallet Lattice beam cutting machine for wall beams Electrical/Control Spare Parts, Mechanical Spare Parts Turning device for the production of double walls

See pictures

Many thanks for your interest in our machinery, please find below our offer: Combined heat and power plant (CHPU)with up to 500KW A total of 3 independent cogenerators with combined heat and power; Electricity & hot water With only max 13280 operation hours! Operation is done with heating oil ! Permission available Total power approx. 500kw, cascade connection, in depending on power requirements, the various energy producers gradually switch on and regulate themselves on the performance. At peak load, all 3 systems work in parallel with full output Ideal for power supply in remote areas without public supply or as emergency power supply with simultaneous heat recovery if desired. Each engine has a heat exchanger. If heat is not needed, it can also be removed. The plant is constructed and ready, accordingly control etc. Top maintained. Spare parts for maintenance etc. av ...

we have all spare parts for the above engines Mitsubishi S6A3 , S12A2 S6R2 S12R S16R new and used Spare parts Cummins KTA all models,

MADO MSM 765 SL SUPRA 70, 70 liters bowl cutter, two bowl speeds, mixing speeds, knife head with 6 knives, refurbished

Bettcher Power cleaver / slicer Model: 39 Stainless frame, six product chutes on turntable, with stainless circular blade for slicing, ideal for slicing salami / pepperoni etc

Kramer + Grebe VSM 200 STL 200 litre vacuum bowl cutter stainless steel bowl variable knife speed two bowl speeds loading device for 200 liter standard trolleys unloader

Seydelmann cutter 120 liter, type K 120 AC Completely made of special stainless steel 120-liter bowl made of stainless steel Frequency speed regulator 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: left side Main cover is made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 190 depth: 150 height: 180 Main motor power: 40 kW Voltage: 400 V, 50 Hz Delivery time: 30 working days after advanced payment

approx. 3.000 pieces, Rotho crates 40x30x22cm with lid and 60x40x30cm without lid - used - : Price for the entire lot from location: 5.500.-€ (net)! Complete sale only! small with lid Size without lid Manufacturer Rotho Rotho Year of construction - - Type - - Dimensions 40 x 30 x 22 cm 60 x 40 x 30 cm Internal dimensions 36 x 26 x 21 cm 56 x 35.5 x 30 cm Qty 2000 pcs. 1000 pcs. Quantity per pallet 64 pcs. 20-24 hrs. Condition The condition of the container may vary. There may be signs of wear, such as scuffed corners. The inside should be clean as they are from production. The outer surface partly has adhesive residues from labels. Available: immediately Location: 79677 Schönau, Germany • small containers with lids (dimensions: 40 x 30 x 22 cm); Quantity approx. 2,000 pcs.

Continuous vacuum filler for straight filling, portioning, and twisting Optional: twisting and holding device All in one 80 liter hopper with counter arm and reinforced scraper, tipping, and hopper lock Hopper inlet 100 mm diameter Integrated vacuum pump Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 4 KW Machine dimensions in cm: Width: 70 Length: 90 Height: 165 Delivery time: 20 working days after advanced payment

FESSMANN 1000 lit

Butterpack machine, margarine packaging machine, packing machine Stations: Swivel cell Paper fending and folding equipment With photo cells pressure centering Date stamp station with thermal pressure Volumetric dosage with trough Final folding station Parcel launch station Exhauting tape 1,000 mm long Format: 100 x 75 x 35 mm = 250 size or other format for additional price Products: Butter or similar products Dosage: Volumetrical 100 â 250 grams, infinitely adjustable Dosage accuracy: +/-1% Unwrap material: Parchment, concealed aluminium foil Date: Dye-stamp print Power: 40 packages/min.

AFT Sandwich cutter Stainless frame, belt dimensions 2200mm x 150mm, manual wheel to set product height, 3Ph, mobile

Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...

Siemens combined fluoroscopy and X-ray system Sireskop SX with the following device components: generator Polydoros SX 65/80 tube OPTITOP 150/40/80 HC 0.6/1.0 digital image processing Fluorospot TOP Image intensifier 40 cm PACS integration DLR 2nd Workplace 3D3 ceiling tripod 2nd tube OPTITOP 150/40/80 HC 0.6/1.0 vertical stand Vertix complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless oth ...

Siemens combined X-ray and fluoroscopy system Sireskop SX with the following device components: generator Polydoros SX 65 tube Opti 150/40/73 C 0.6/1.0 digital image processing Fluorospot H Image intensifier 33 cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the bu ...

Siemens X-ray and fluoroscopy system/ angiography Polystar TOP with the following device components: generator Polydoros SX 65/80 tube Megalix 125/40/82 CM 0.6/1.0 Digital image processing Fluorospot TOP Image intensifier Sirecon 40-4 HDR 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is  ...

For sale real estate compendium located in the Municipalities of Cartoceto and Colli al Metauro (PU), consisting of production buildings and agricultural land mainly used for wine and olive growing. The complex includes a company building with cellar, processing and storage rooms, sales point, tool shed, technical rooms and large appurtenant courtyards, for a total commercial area of about 964 square meters (as per the evaluation report). The winery, set in a prestigious hilly context, enjoys a suggestive panoramic view of the surrounding hills and the Adriatic Sea, in the stretch between Pesaro and Fano , an element of particular interest also from a wine tourism and accommodation point of view. The agricultural land extends between vineyards, olive groves, arable land, meadows and wooded portions, for a total area of more than 10 hectares, in an area dedicated to wine and oil  ...

Dornier Opus with the following device components: generator Hofmann Selector D tube Comet DI 97 HS-33/81-150 0.6/1.2 Image amplifier 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qu ...

Key data: 2500 KW, 10500 V

New industrial gas generator set based on MTU Series 4000 engine. Designed for reliable continuous power generation in industrial facilities, CHP plants, and energy projects. Key specifications • Engine: MTU 20V4000 L64 FNER • Fuel: Natural Gas / Biogas • Electrical Output: 2500 kW • Frequency: 50 Hz • Speed: 1500 rpm • Configuration: V-20 gas engine • Electrical Efficiency: up to 43–44% Applications • Combined Heat and Power (CHP) plants • Industrial power generation • Data centers • Energy projects and microgrids Condition: New Availability: On request Location: Europe Contact for detailed technical documentation and price PM: infobscgroup.eu

Stepped end and flush cut tuber, 4 plies, 3 colour tail end printer, photo cell for preprinted paper, web guide units

Gyro, capsule, rotary piston and sine pumps HILGE, FRISTAM, MASO, KSB and others Stainless steel pumps in various designs and sizes

Key data: 2000 KW, 10500 V

New industrial gas generator set based on the MTU Series 4000 engine platform. Designed for reliable continuous power generation and combined heat and power (CHP) applications. Key Specifications • Engine model: MTU 16V4000 L64 FNER • Fuel: Natural gas / biogas • Electrical output: approx. 2000 kW • Speed: 1500 rpm • Frequency: 50 Hz • Configuration: V-16 gas engine • Electrical efficiency: up to 44 % Applications • CHP power plants • Industrial power supply • Data centers • Distributed energy systems and microgrids Condition: New Availability: On request Location: Europe Contact for price, delivery time and detailed technical documentation PM : infobscgroup.eu

Key data: 2300 KW, 10500 V

High-efficiency industrial gas generator set based on the proven MWM TCG 3020 V20 engine platform. Designed for reliable continuous operation in power generation and combined heat and power (CHP) applications. The unit offers high electrical efficiency, long maintenance intervals, and excellent fuel flexibility, making it suitable for natural gas, biogas, landfill gas, and other gaseous fuels. Key Specifications • Engine model: MWM TCG 3020 V20 • Configuration: V-20 gas engine • Electrical output: up to 2300 kW • Rated speed: 1500 rpm • Frequency: 50 Hz • Fuel type: Natural gas / Biogas / Landfill gas • Electrical efficiency: up to 45 % • Total efficiency (CHP): up to 87 % Technical Highlights • Proven MWM TCG 3020 series engine platform • Long service intervals (up to 80,000 operating hours overhaul interval) • Optimized for high-effi ...

Key data: 1500 KW, 400 V

New industrial gas generator set based on the reliable MTU Series 4000 engine platform. Designed for continuous power generation in industrial facilities, CHP plants, and distributed energy projects. Key Specifications • Engine: MTU 12V4000 L64 FNER • Fuel: Natural Gas / Biogas • Electrical Output: 1500kW • Frequency: 50 Hz • Speed: 1500 rpm • Engine Configuration: V-12 gas engine • Electrical Efficiency: up to 43–44% Applications • Combined Heat and Power (CHP) plants • Industrial power generation • Data centers • Distributed energy systems and microgrids Condition: New Location: Europe Availability: On stock Please contact us for price, detailed technical documentation, and delivery conditions. PM : infobscgroup.eu

Tip width: 700 mm Tip height: 150 mm Circulation diameter over bed: 300 mm Bed width: 180 mm Spindle bore: 38 mm Mounting in the spindle bore: MK 5 Speed range, infinitely variable: 30 - 450 / 150 - 3000 rpm Range of longitudinal feeds: (14) 0.07 - 0.65 mm/U Area of plan feeds: (11) 0.03 - 0.12 mm/U Metric threads: (18) 0.2 - 3.5 mm Inch Thread: (21) 8 - 56 Gg/1" Pinole path: 85 mm Pinole holder: MK 3 Engine power S1 100%: 1.5 kW / 400 V Motor recording power S6 40%: 2.2 kW / 400 V Machine dimensions (W x D x H): 1380 x 640 x 500 mm Weight approx.: 235 kg without base Delivery: - Digital display - 3-jaw chuck PO3-160 mm steel version - Feed flange 160 mm - Solid grain tips - Interchangeable wheels - Quick-release steel holder size 20-2 with 2 straight inserts - Slip clutch - Micrometer longitudinal stop - Plan sled with top support - Frequency inverter ...

Qty. 8 Second-hand bell annealing furnaces Mfc.: FERRE’ Built: 1980 Modernisation in 2000 Protective atmosphere: N2 No. of furnaces: 8 No. of base: 24 Base relationship: 1 : 3 Annealing temp.: 670-710 °C Coil dia.: 1900 mm Max. stack height: 3600 mm Electric Drawing Mechanical Drawing Combustion Drawing Certification: Allegato V/81 User manual

20,000 liters tank with thermal insulation not used tanks

Panaroma Model: AT400 Pasta stacking and cutting machine Serial: 1229 2002, Stainless stacking and cutting machine, 400mm width, designed to roll, to dust, to cut and to overcome the pasta sheet layers, suitable for lasagne or tagliatelle. Output up to 100Kg / hour, variable speed, with timer, 3ph, mobile

Hammer 16T-M2152-1pcs (136t) Hammer 10T-18KP-1pcs(104t) Hammer 5T-17KP- 1pcs (75ton) Hammer 3T-M213-1pcs(63T) Hammer 2T-M212-1pcs(40T)

Key data: 75 KW, 400 V

Combined heat and power plant (CHP) HBG 75 – Electric hail – 75 kW – YOC 2014 For sale is a combined heat and power plant type HBG 75 – E 0836 TE312 from the manufacturer Elektro Hagel, built in 2014. Technical data: Manufacturer: Elektro Hagel Type: HBG 75 – E 0836 TE312 Year of Make: 2014 Operating hours: approx. 65,000 h Engine: Gas gasoline engine, four-stroke Generator: Leroy Somer LSA 44.2 M95 C6S/4 Generator type: air-cooled synchronous generator Voltage: 400 V Electrical power: 75 kW Thermal power: 93 kW Total rated heat output: 196 kW Equipment: Launch system Gas pressure regulator and safety range Switchgear with PLC control Flue gas system with heat exchanger (AWT) Soundproofing Condition & History: Approx. 65,000 operating hours All maintenance was carried out regularly by a specialist company The  ...

diameter range 3-10 mm cutting length 10-130 mm

Transit Ultrasonic Banderolier ATS US 2000 AB TR; good condition; maintained and checked by ATS Customer Service in Heidelberg; Frame 360x260mm; Bandwidth 15mm. Transit ultra sonic banding machine ATS US 2000 AB TR; good condition; cleaned and checked by the support of ATS Heidelberg; frame 360x260mm; band width 15mm.

Werner & Pfleiderer Multimatic Head Machine 4-row used immediately available in the warehouse. Type: Multimatic 4-row Stand machine the machine is in the baker's condition Built in 1993 380 Volt

Spindle diameter 203.2 mm x-travel 9,000 mm y-travel 4,000 mm Grinding spindle diameter 335 mm Spindle holder ISO 60 Spindle speeds 1-350 / 5-1,200 rpm w-axis 800 mm z-axis 1,200 mm Rapid x-axis 8,000 m/min Rapid y-axis 6,000 m/min RAM Dimensions 530 x 600 mm Main drive 75 kW Total power requirement 165 kW Machine weight approx. 130 t Space requirements approx. 16 x 5.5 x 8.1 m Addition: - hydrostatic guides in x-, y- and w-axis - Telescopic cover for the X-axis of the bed - cumulative Z and W axes - Leveling shoes - Platform Y axis

Travel X-axis 19,000 mm Y-axis 3,500 mm Z-axis 1,000 mm W-axis 1,000 mm V-axis 2,500 mm B-axis 360°/ 0.001 Table size 4,000 x 3,500 mm Maximum permissible weight on the table 65 t Spindle diameter 160 mm Mounting cone in spindle 2079 DIN/ ISO 50 Spindle speed 2.5 - 1,000 rpm Spindle motor power 90 kW RAM cross section 400 x 400 mm Automatic tool changer 60 positions Feed in all axes 1 - 6,000 mm/min Rapid response in all axes 10,000 mm/min Automatic indexing 360,000° Plate field 12,750 x 6,000 mm CNC, electrical and mechanical overhaul by Siemens in 2003

Travel X-axis 9,500 mm Y-axis 4,100 mm Z-axis 950 mm W-axis 900 mm Main spindle speeds (infinitely adjustable): 3.15 - 1000 rpm Spindle motor power 58 kW Feed speed (infinitely adjustable): X-axis 0.1 - 9600 mm/min Y-axis 0.1 - 5600 mm/min Z-axis 0.1 - 5600 mm/min W-axis 0.1 - 5600 mm/min Accessories: Plate field: 6 x 4 m (CNC-controlled B- and V-axis) Table: 2 x 2 m (CNC-controlled B- and V-axis)

diameter range 7-12 mm cutting length 6000 mm