136,161 used machines on RESALE, but how to find them? Machine Search
SANTANDREA DUAL SHAFT SHREDDER, Shafts length 1.500 mm, 77 mm.knives - 2 hooks, 1.500 x 960 mm shredding room, planetary gearbox, Electric motor 75 kW 400v 50hz, Hydraulic pack with 400 lt.tank, loading hopper with oleodynamic pressing unit, hydraulic pack, New electrical control panel, CE compliance, Users manual, electrical drawings, Sturdy carbon steel structure, Dimensions 3.400 x 2.000 mm, width: 1.500 mm. , Power: 75 kw
We offer Doka accessories NEW for the anchor system 15.0 with a 20% discount 14 x Exposed concrete offset 15,0 5cm, new with 20% discount = 32,40€/piece 30 x Flow disc Rd28, new with 20% discount = 28,88€/piece The Doka fair-faced concrete support 15.0 5cm (article number: 581973000) is a galvanised accessory for the Doka 15.0 anchor system. It is used for the precise alignment and uniform hole pattern of tie points in exposed concrete. It has a length of 5 cm and a wrench size of 27 mm. The Doka Rd28 pulley (item number 580497000) is an accessory for the Doka 15.0 anchor system and climbing systems. It weighs about 0.25 kg and is used for precise alignment, positioning and sealing in exposed concrete formwork. If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at ...
Manufacturer: MONTI ANTONIO Laminating-Coating Model: hot melt mod. 908 Type: Fleece and Foam LAMINATION & Coating with COATEM Foam make to inject direct to fabric for Coating. Working widh: 1800 mm Manufacture Date: 2003 (like new with new spare cylinder -hotmelt spareparts) With new spareparts Complete Modernisation in year 2016 with new electricity and software. description: working with SL1 Pleva weftstraitner go to 2 line Lamination Foam or fleece to Fabric
Analytik Jena Merkur Mercury Analyzer Single-beam device with low-pressure lamp Measuring range in the ppt and ppb range. Excitation Fluorescence at 253.7 nm Software
Ansaldo Condensing Steam Turbine Power: 9000 kW RPM: 7500 / 1500 Steam pressure: 40bara Steam temperature: 420 ºC Back Pressure: 0,08bar Number of extractions: 2 Number of stages: 8
Heat and Power Plant with an Absorption Chiller An 850 kW combined heat and power plant with an absorption chiller. The systems ran perfectly until the end and all maintenance was carried out. No damage is known. The CHP ran for 51,429 hours of operation. The absorption chiller has run for 42,350 hours. The following components use an overhauled long block or completely overhauled. The components relevant to assemblies for modernization were marked: - complete panelling - Interfaceschronk - Oil relubrication pump Mechanically overhauled and electrically tested - Oil level monitoring - Plotter heat exchanger - Pressure expansion foll3 (if present) - Pressure transducer and temperature sensors - Rubber rails for motor and generator - Clutch element - Air filter inserts - Safety valves and arnot inserts - Sylomer strips - Hot water preheating pump and heating eleme ...
3x VERSATRONIC RV1s P&P machines which are slow (1200cmp/h) but full fully functional and with a lot of feeders. These machines were manufactured in a UK factory Versatronic. Machine were named Violer, Rosie and Blue. The last one is faster, little better software for fiducial camera for components. All machine are working and were used for prototype and low series like 50pcs electronic or 25pcs or 200pcs electronic. All P&P machines have two cameras, one for fiducial (up camera) and one (down camera) for components. Machines can place without problem components down to 0402 and fine pitch component like QFN or VFQFPN48… Speed for firs two is 1200cmp/h the last one is around 1500cmp/h. All machines have tool changer with 10 positions and one tool for camera auto calibration. Only 5 different tools were used but can be used up to 10 different tools. On one machine you can put u ...
Resistance annealing machine This machine anneals (thermally straightens) stainless steel wires from 0.30 - 0.50mm). FUNCTIONAL DESCRIPTION: - The machine enables heating by direct passage of electric current through the wire through the wire (resistance annealing process). The device is equipped with 4 special power stabilisers for regulation, in combination with an optical pyrometer for temperature control and thermoregulation. - The simultaneous heating of the 4 wires takes place in a chamber saturated with inert gas by the electrical contact transmitted by two conductive V-shaped discs (short-circuit rollers). are transmitted. Two further V-shaped discs have the task of guiding the wires. - The system can be integrated into an existing automatic Scholl disc system, which, however, is not not included in the scope of delivery of the machine. Alternatively, the straightened ...
Key data: 4000 mm, 2000 mm, 575 mm
Pair of cast iron angle plates Drilling diameter: Ø 27 mm Width: 575 mm Depth: 2000 mm Total height: 4000 mm Unit weight: approx 6 T
Marel concept 500 labelling machine, - top and bottom labelling machine
GRANULATION AND SEPARATION PLANT, Capacity up to 600 kg/h (see below list), separation surface 750 x 375 mm, Vibratig ytable with a 0.750 kW drive, Blower - 0.750 kW drive, Total drive power 1,5 kW, Weight 380 kg, Processing capacity in kg/h approx. :, CU - Solid cable 500, CU - Stranded cable 250, AL - Cable 300, CU - Granulate 600, CU/AL - Radiator scrap 600, Electronic scrap 250, Various plastics 300, Tyre rubber 300, installed power - used power in work: about 60-65% : 1,5 kW, availability: 1 month approx, capacity: up to 600 kg/h, conditions: new equipment, SPECIAL FEATURES: spares usually available in stock - no downtime, CONSIDERATIONS: Ideal to start a profitable recycling business from scraps
Attachment milling machine with Bobcat 115cm attachment, Manufacturer: Wolverine, Year of manufacture 2025, Model TL-12-73W, With hydro drive, 180cm working width, 65cm depth, 65cm height, With 114cm Bobcat skid steer loader attachment, Transport dimensions:, 220cm transport width, 70cm wide, 85cm height
Mounting plate with MS08-Symlock mount and retaining lug, - Recording: MS08 Symlock, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock
Mounting plate with MS08-Symlock mount and retaining lug, - Recording: MS08 Symlock, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock
Mounting plate for hammer HM300 with MS03 mount, - Suitable for Hammer HM300, - Recording: MS03, - Hole pattern: 34 x 40 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock
Mounting plate with JCB / Miller / Geith mount, - Suitable for demolition and sorting grapples:, - GRP450, - GR45, - GRP750, - GR75, - Recording: JCB / Miller / Geith, - Hole pattern: 36 x 48 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock
Toscrew plate for hammer HM100 with MS01 holder, - Suitable for Hammer HM100, - Recording: MS01, - Hole pattern: 26 x 26 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock
Toscrew plate for hammer HM100 with MS01 holder, - Suitable for Hammer HM100, - Recording: MS01, - Hole pattern: 26 x 26 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock
Mounting plate for hammer SB70 with MS01 mount, - Suitable for Hammer SB70, - Recording: Martin M02, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock
Mounting plate for hammer SB70 with MS01 mount, - Suitable for Hammer SB70, - Recording: MS01, - Hole pattern: 13.5 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock
PEIFFER electric motor 8.3 kW, 1400 rpm, drive drum 740 x 310mm
Mounting plate with Martin M03 mount and retaining lug, - Recording: Martin M03, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock
Mounting plate for Hammer HM250 with Martin M03 mount, - Suitable for Hammer HM250, - Recording: Martin M03, - Hole pattern: 29 x 29 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock
Mounting plate for Hammer HM250 with Martin M03 mount, - Suitable for Hammer HM250, - Recording: Martin M03, - Hole pattern: 29 x 29 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock
Mounting plate for Hammer HM250 with Martin M03 mount, - Suitable for Hammer HM250, - Recording: Martin M03, - Hole pattern: 29 x 29 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock
Mounting plate for hammer HM100 with Martin M03 mount, - Suitable for Hammer HM100, - Recording: Martin M03, - Hole pattern: 26 x 26 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock
Mounting plate for hammer HM100 with Martin M03 mount, - Suitable for Hammer HM100, - Recording: Martin M03, - Hole pattern: 26 x 26 cm, - made of machine steel S355, - Dimensions see product images, - Available immediately from stock
De DIAVITE DT-15 is een ruwheids- en oppervlaktemetingsinstrument uit de DIAVITE-serie, gebruikt om de oppervlaktekwaliteit van materialen te bepalen in industriële metrologie-toepassingen. Het registreert ruheidsparameters via een stylus/probe en wordt vooral tweedehands aangeboden, omdat nieuwere modellen recentere technologie bevatten.
WACO - KUJAKON high speed planing and cutting line, Manufacture year 2003, Feed speed up to 200 m/min, Wood length 1800 - 6200 mm, WACO high speed planer Solid, - 6 spindles B-R-L-T-T-B, - incl. tooling, KUJAKON automation with de-stacking, infeed and stacking, - Outfeed with multiple cross cutting with 4 saws, - Signode pack strapping system
DME Small Keg Washer - Second Hand CAPACITY: Fills up to 20 or cleans up to 14 kegs per hour (2 station) Fills up to 40 or cleans up to 28 kegs per hour (4 station) SPECIFICATIONS: Individual on / off valves allow filling of one to two or to four kegs (depending on head capacity) at the same time 3600 RPM s/s pump mounted on cart CO2 manifold with valved inlet / outlet and pressure gauge All stainless steel manifolds Portable stainless steel cart with locking casters Motor starter, on/off switch, 20 ft (5m) cord Keg cleaning support racks at 3'6" (1.070m) Counter pressure manifold with bleed off 1 ½” tri clamp connector for kegging tank outlet to filler hose This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Straight runner for applying a sign or wrap-around label (with glue) to cylindrical containers,, Gluing height: 205mm, (optional 255mm possible) classic strip gluing, Label length: 80 – 335mm (e.g. 99mm, 850g can), Performance: max. 9,000 containers/hour, without restrictions, as label lengths are independent, Frequency controlled with fully automatic speed control, Triggering the labeling process via photocell, Incl. glue pump with heating and stainless steel lid, Silver grey paint finish, The machine comes from a small factory and was only used sporadically,, This makes it excellent. However, it has been technically and visually overhauled and is therefore in perfect condition., Including 6 months warranty on mechanical parts (excluding wear parts), The sale includes one format set of your choice, additional format sets are available optionally at an additional cost., Optionally avai ...
Carsoe Group Anytray Buffer 1500 – Pneumatic Tray Buffer System, Manufacturer: Carsoe, Model: Anytray Buffer 1500 LLANONE Right Pneumatic, Year of manufacture: 2022, Machine type: Tray buffer / product accumulation system, Description, The Carsoe Anytray Buffer 1500 is a pneumatic tray buffering system designed to temporarily accumulate and manage trays within automated food processing and packaging lines. The system helps stabilize product flow and prevents interruptions between processing machines., Built with hygienic stainless steel construction, the unit is suitable for demanding food production environments, especially in seafood and protein processing facilities., Technical Specifications, - Manufacturer: Carsoe, - Model: Anytray Buffer 1500 LLANONE Right Pneumatic, - Year: 2022, - Power: 0.46 kW, - Supply voltage: 230 VAC + N + PE, - Frequency: 50 Hz, - Air pressure: 6 bar, - M ...
Martin/Geel/Miller/Engl weld-on plate with retaining lugs Size M03 35mm shaft diameter 184mm internal widths 180mm shaft spacing
diameter range 3-10 mm cutting length 10-200 mm
BIG weld-on hook suitable for Liebherr 506, 507, 508, 509, - Year of construction: 2025, - made of S355 steel, Further recordings also available!
BIG weld-on hook suitable for Liebherr 506, 507, 508, 509, - Year of construction: 2025, - made of S355 steel, Further recordings also available!
1 set of weld-on hooks suitable for Kramer large mount
1 set of weld-on hooks suitable for Kramer large mount
PRICE REDUCED -10%: € 675, - instead of € 750, - net excl. 20% VAT, Manitou / Merlo / JCB Q fit / Euro adapter suitable for three-point mount KATII, 130 kg net weight
1 set of weld-on hooks suitable for Kramer large mount
NEW, suitable for CAT TH407
BIG weld-on hook suitable for Genie / Terex attachment, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ø 32 mm, Bolt center: Ø 25 mm, Bottom bolt: Ø 35 mm, Bolt center-to-center distance: 330 mm, more recordings available!
BIG weld-on hook suitable for Genie / Terex attachment, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ø 32 mm, Bolt center: Ø 25 mm, Bottom bolt: Ø 35 mm, Bolt center-to-center distance: 330 mm, more recordings available!
BIG weld-on hook suitable for Genie / Terex attachment, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ø 32 mm, Bolt center: Ø 25 mm, Bottom bolt: Ø 35 mm, Bolt center-to-center distance: 330 mm, more recordings available!
BIG weld-on hook suitable for Kramer mini mount, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ø 31 mm, Bottom bolt: Ø 38 mm, Bolt center-to-center distance: 247 mm, Further recordings also available!
BIG weld-on hook suitable for Kramer mini mount, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ø 31 mm, Bottom bolt: Ø 38 mm, Bolt center-to-center distance: 247 mm, Further recordings also available!
BIG weld-on hook suitable for Kramer mini mount, - Year of construction: 2025, - made of S355 steel, Dimensions:, Top bolt: Ø 31 mm, Bottom bolt: Ø 38 mm, Bolt center-to-center distance: 247 mm, Further recordings also available!
maximum number of results exceeded
please refine your search
