an 005 used for sale

ANACONDA FTR 200 with CAT 2.8 (55kW) – TIER 5, ANACONDA FTR 200 with JCB Dieselmax (55kW) – Tier 5, ANACONDA FTR 200 with DEUTZ TD 2.9 L4 (50kW) – TIER 5, 20 m long conveyer belt, Bunker standard 6 cm³ with optional increase 10 cm³, Hydraulically foldable rear section, Hydraulically height-adjustable front part and rear part, Impact protection plate under the belt at the intake, Conveyor belt with a width of 1050 mm, Conveyor belt has a 4-ply construction., Hopper capacity: max. 10 m³ (with extensions), Variable speeds, Hydraulic support legs for easy setup, Hydraulisch klappbarer Kopfbereich serienmäßig, Easy access to the engine bay, Weight: 14.485 kg – 14.485 tons depending on equipment, Weight with tipping grate: 17,000 kg, Weight with vibrating screen: 18.985 kg, Weight with tipping grate: 17.000 kg, Weight with vibrating screen: 18.985 kg

CAT – 9.3 – STEP 5 (310 kW), FLSMIDTH RAPTOR 250 cone crusher, Direct-drive coupling and pulley, Hydraulic adjustment in closed position and overrunning protection, Maximum suction diameter: 235 mm, Minimal CSS: 6 mm, Hydraulically foldable hopper flap plates, Hopper volume: 6.5 m³, Continuous load and material monitoring, Safety devices as standard, Local lubrication points, Ultraschall level sensor standard, Radio remote control standard, Circulating sieve box 12 ft x 5 ft (3.66 m x 1.52 m), Upper and lower deck, Additional transfer conveyor 500 mm, Maximum intake diameter: 235 mm, Minimal CSS: 6 mm, hopper volume: 6.5 m³

Series equipment:, ANACONDA DF 514 with CAT 4.4 (110kW) – Tier 5, High-performance screening box 4.27m x 1.52m 2-deck screener, Side tensioned screen deck system (upper and lower deck), Bunker volume of 7.2 m³, Variable speed at bunker belt 4-layer belt conveyor, Screening box angle adjustable between 15–19º, Sieve box paths for maintenance and screen change, Variable speed for main and side conveyors, BUNKER:, Width: 2.7 m, Length: 3.7 m, Maximum volume: 7.2 m³, BUNKER CONVEYOR, Width: 1200 mm, Type: Flat cable, COLLECTION CONVEYOR, Width: 1200 mm, FEED conveyer belt:, Width: 800 mm, Throw height: 3.80 m, MID conveyer belt:, Width: 800 mm, Outlet height: 3.60 m, OVERBONDED TRANSPORT BELT-HECKBAND:, Width: 1200 mm, Outlet height: 3.40 m, length: 3,7 m, Maximum volume: 7,2 m³, width: 1200 mm, Type: Flat ribbon, width: 800 mm, width: 800 mm, Ejection height: 3,80 m

ANACONDA TR100 with CAT 2.8 (55kW) – TIER 5, ANACONDA TR100 with JCB Dieselmax (55kW) – TIER 5, ANACONDA TR100 with DEUTZ TD 2.9 L4 (50kW) – Tier 5, 33 m long conveyor belt, hydraulically foldable inlet and rear area, Hydraulically height-adjustable front part and rear part, Impact protection plate under the belt at the intake, Conveyor belt with a width of 1050 mm, Conveyor belt has a 3-ply construction., Weight: 19.000 kg – 19 tons depending on equipment

Used Used Kegs Filler Alfred Gruber Anlagenbau: Year: 1991 Condition: Good Used Kegs Filler Alfred Gruber Anlagenbau: Model: 2/1 Year: 1991 Speed: 40 keg/h For beer Safety protections Code: T 208 More details: https://bottlingscout.com

General SKU050C491 MakeANAG Dudingen No.004 Year of construction1997 LocationBarneveld Main Features MaterialStainless steel Volume400 Ltr. Specified Features - Silo MaterialStainless steel 1.4435 (316L) Silocheck Capacity400 l Sizes1150 x 770 x 200 mm Conical bottom± 600 mm Flat topcheck With covercheck Manholecheck dia. 400 mm Outletcheckdia. 250 mm Information Mounted on wheelscheck Floorspace1,4 x 0,9 m Total height1,3 m Weight450 kgSilosAnag DudingenTanks > SilosBrand > Anag Dudingen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

x-travel: 4.000 mm y-travel: 1.700 mm z-travel: 1.500 mm control: HEIDENHAIN iTNC 530 clamping table: - surface area: 4.200 x 1.100 mm max. workpiece weight: 10.000 kg/m² T-slot number x size: 7 x 22 mm Abstand 150 mm feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/min Orthogonal indexable milling head: - Swiveling area front/back level: 0,02 x 0,02 ° = 162 Pos., Power at S1/S6 ED: 30 kW Speed range, stepless: 60 - 6.000 min-1 max. torque: 1.500 Nm tool taper: SK 50 – DIN 69871 ZF - Gearbox: 2 Getriebestufen automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/200 mm workpiece length: 400 mm weight of tools max.: 25 kg changing positions: Horizontal/Vertikal total power requirement: kW weight of the machine ca.: 50 t dimensions of the machine ca.: 11,0 x 6,0 x 4,6 m Equipment / Accessories Universal milling head UAD, 0.02x0.02°, positioning via inter ...

temperature max.: . ° internal length of the oven: . mm internal width of the oven: . mm internal height of the oven: . mm total power requirement: kW weight of the machine ca.: t Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Endoline SPT case erector and taper 2017, Endoline 102 Case erector inline with Endoline SPT Case taper with top and bottom tape heads and side grip belts, with spare belts and boxes of tape, mobile, 1Ph

temperature max.: . ° internal length of the oven: . mm internal width of the oven: . mm internal height of the oven: . mm total power requirement: kW weight of the machine ca.: t Annealing furnace with extraction system Make: Helmut Peiler 2 pieces available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Slitting device for Ferrum Entsteinmaschine, type EA,, equipped with 25 new circular knives,, suitable for plates with 50 holes, e.g. 34/20 (plums), With this device, the fruits, which are still divided during pitting, are cut on the underside by the scoring knives. As a result, the fruits are not injured when the stone is ejected.

Slitting device for Ferrum Entsteinmaschine, type EA,, equipped with 25 new circular knives,, suitable for plates with 50 holes, e.g. 34/20 (plums), With this device, the fruits, which are still divided during pitting, are cut on the underside by the scoring knives. As a result, the fruits are not injured when the stone is ejected.

Prakma Book block gluing machine

Overview This brewing facility, with equipment from 2018 - 2020, is becoming available as brewing operations will cease in the summer. The machines are still in operation and will be available from 01.05.2024. This offer consists of a malt mill (Maltman), brewhouse (Speidel), fermentation and storage tanks (Speidel), a bottle filler (Rizzolio) with labeling (ENOS) as well as accessories for the operation of the brewery. Scope Brew house | Braumeister | 500l | 2019 3x Pressure Tank | Speidel BBT | 1.2 bar 625l | 2018 – 2020 1x Pressure Tank | Speidel BBT | 2.5 bar 625l | 2021 4x Fermentation and storage tanks | Speidel BBT | 625l | 2018 Counter pressure filler | Rizzolio | RLV 4-4-2 | 2019 Cooler with 100l buffer tank and automation | Energytech/ Onnline | 2019 Labeller | Enos Euro | Compatta | 2020 Mill | Maltman | MM-150SP | 2018 Density meter | Anton Paar | DMA35 | 2019 Plate heat ex ...

A modular compact viscometer Anton Paar for rotational and oscillation measurements is available. Measuring plate: PP25, measuring plate diameter: 25mm, max. torque: 125mNm, min. torque: 0.4µNm, torque resolution: 100nNm, max. speed: 1500rpm, sample temperature min./max.: -20°C/220°C, temperature control unit: P-PTD 220, max. measuring cell pressure: 150bar. Machine dimensions X/Y/Z: approx. 400mm/700mm/550mm, weight: approx. 35kg, control system: RheoCompass Light. Documentation available. An on-site inspection is possible.

CNC Vertical Turret Lathe with C axis and live tool 3 Turning Plates Changer (translating pallet system) EQUIPPED WITH: Siemens Sinumerik 840C CNC Control (2015 Retrofit) Vertical Ram with Live Spindle Pallet Changer (3-Pallets) 16-Station Automatic Tool Changer C-Axis Table Year 2005 CNC Siemens 840 C Max. turning dia.: 2200 mm Max. turning height: 1800 mm Ram travel: 1500 mm Main drive: 75 kW Live spindle: 15 kW Spindle rotations: 45- 1350 1/min Max. workpiece weight: 12 000 kg Pallet changer with 3 pallets (turning plates) Tool magazine: Right: 8 turning tools Left: 8 boring/milling tools Feeds: 0,1-6000 mm/min Carriage feed: Vertical: 1500 mm Horizontal: 1320 mm Table rotation (2 ranges): 2,5 – 70 / 10-280 Max. table torque: 50 000 Nm Machine weight: 43 Ton Machine HxWxL: 6,8 m x 10 m x 9,7 m

Condition Unused Brand SEW-Eurodrive Type RX57 DRS71M4 / AND8 Voltage Volt 3 fase 380 volt 400 volt Force KW 0,55 KW Rotational speed RPM 364 RPM Shaft size mm 20 mm Length 40.00cm Width 23.00cm Height 20.00cm All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)

A conventional lead and feed screw lathe Antonio Anslemi is available. Center height: 260mm, center distance: 1500mm, swing diameter over bed/support/gap bed: 520mm/320mm/670mm, bed width: 370mm, speed: 1400rpm, tailstock quill diameter: 65mm, tailstock stroke: 240mm, machine dimensions X/Y/Z: approx. 3000mm/1200mm/1500mm, weight: approx. 2500kg. An on-site inspection is possible.

Equipment: overpressure, vacuum,Manufacturer: GROSS Behälter- und Anlagenbau,Condition: used,Volume: 21.600,Vacuum: 0.1,Max. overpressure: 0.5,Shelves: clapper bottom,Design: standing,Stand shape: Stand frame,Diameter inside: 2.890,Cylindrical height: 2.500,Total height: 4.600,Wall thickness shelves: 5.0,Wall thickness cylinder: 3.5,Year of construction: 2000,Man hole / dome: in the upper floor (DN 600),Type plate: Yes,Equipment: Outlet valve, crane eyelets,Outlet: Flange DN50,Remarks: Manufactured according to DIN6618 pipelines inside the container stand frame made of 1.4301 (V2A), manhole cover made of 1.4541 (V2A), last

Koch Membrane Systems (GEA Tuchenhagen computer designed) Ultra Filtration (UF) plant for continuous circulation / concentration / filtration and the production of double cream cheese (philadelphia style). Once the plant is running continuously with ratio control, no manual interventions are generally necessary for the production of the UF concentrate. However, for optimal production of consistent quality, strict adherence to various prerequisites is necessary, e.g. regarding cleaning. Line still located at its original position in the dairy in Austria., The Ultra Filtration line exist out:, - Level tank, 750 liter., - Product feed pump (P1), Tuchenhagen VPB 32 L, 5.000 ltr/h, 39 mWs, motor 3 kW - 2.900 rpm - 380 V - 50 Hz., - Permeate pump (P2), Tuchenhagen VPB 32 L, 5.000 ltr/h, 35 mWs, motor 3 kW - 2.900 rpm - 380 V - 50 Hz., - CIP pump (P3), Tuchenhagen VPD 51, 110.000 ltr/h, 8 mWs,  ...

Limpet coil roller machine hydraulic To form half round pipe from flat metal strip and bending into wanted radius with spiral continuous. Manufacture MG srl Year 2002 -Shafts output 80 mm -Interchangeable set of molds to form half pipe 60 mm , 90 mm , 115 mm -Coil holder for the reel metal strip with guide-way bench uncoiling and alignment the steel strip to the rolling machine -Pinching lower central roll adjustable to form the half pipe -Digital position readout to determine the bending diameter of the bending, the pitch of the spiral, the shape of the half tube forming -hydraulic arm movable in 3 directions to set the pitch for continuous coil rolling -Upper vertical support hydraulic operated to hold in position the formed diameter and collect the spiral from diameter 700 to diameter 3000 mm -Operator console electric with push buttons and digital posi ...

A fully automatic rotary labeling machine Anker (KHS Group) is available. Labeling method: wet glue labels, bottle formats: 250ml/500ml/750ml, label dimensions 1 X/Y: 33mm/119mm, label dimensions 2 X/Y: 36mm/150mm, label dimensions 3 X/Y: 48mm/158mm, labeling capacity: 20000bottles/h. Including formats for wet glue and VE+RE. Documentation available. An on-site inspection is possible.

- Brand: SANT ANDREA - Model: G30/1000 - Cutting chamber: 1000 x 750 mm - Year of manufacture: 2000 - No motor or electrical panel - Blade width: 50 mm

We hereby offer an Anker labeling machine for sale. The labeller was in use until the end and is functional. Technical data: Year: 1992 Format: Euro bottle Capacity: 2000-6000 bph Running direction: left-right Spare parts for the machine are also included. If you are interested or have any further questions, please contact us.

table length: 12000 mm table width: 8000 mm table height: 800 mm Thickness of the plate: 300 total power requirement: kW weight of the machine ca.: 82,5 t dimensions of the machine ca.: 12x8 m 8 available All 8 panels measure 8000 x 12000 mm. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

number: 1x tool adaptor: VDI 50 Shank diameter: 50 mm tool adaptor: Capto C5 Torque: max. 100 Nm Max. Speed: 4.000 min/-1 weight: 19,7 kg Driven Tool WTO 410505081-50 - Angle Drilling and Milling Attachment - Recessed - With Coromant Capto C5 - Internal and external coolant supply - Max. coolant pressure: 80 bar ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 Disc Turret DMG CTX gamma VDI50 Disc Turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline SAUTER Disc Turret VDI 50, DIN 5480, right VICTOR VTurn-36/40/45/46CV (DIN5480) - Machine interface: VD50A - Drive coupling: DIN 5480 - i (n1:n2): 1:1 - Direction of rotation: same - Coolant supply: IC 80 bar - Functional length LF: 124 mm - Projection length LPR: 183 mm - Functional width WF: 34.75 mm The data for this ad was created with ModulMWS - the sof ...

number: 1x tool adaptor: VDI 50 Shank diameter: 50 mm tool adaptor: Capto C5 Torque: max. 100 Nm Max. Speed: 6.000 min/-1 weight: 19,5 kg Driven Tool WTO 410105085-50 - Drilling and milling unit - Straight with offset - with Coromant Capto C5 - Internal and external coolant supply - Max. coolant pressure: 80 bar ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 disc turret DMG CTX gamma VDI50 disc turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline PITTLER PV 630, right-hand turret SAUTER disc turret VDI 50, DIN 5480, right-hand VICTOR VTurn-36/40/45/46CV (DIN5480) - Machine interface: VD50A - Drive coupling: DIN5480 - i (n1:n2): 1:2 - Direction of rotation: unequal - Coolant supply: IK 80 bar - Functional length LF: 160 mm - Cantilever length LPR: 160 mm - Functional width WF: 75 mm The data for this  ...

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners, polyurethane hose, suction hose, hose, vacuum cleaner hose, spiral hose, suction hose, hose connections, hand pipe, hose connector, crevice nozzle -Manufacturer: Nilfisk, inclined rubber tube nozzle unused OVP -Type: 40000214 D40 Antistatic -Connection: Ø 40 mm -Number: 2x nozzle available -Price: per piece -Dimension: Ø 52 x 195 mm -Weight: 0.2 kg/piece

radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 1.1 kW -Speed: 2810 rpm -Max. volume flow: m³/h -Max. pressure: Pa -Inlet connection: Ø 300 mm -Outlet connection: Ø 290 mm -Impeller: Ø mm -Number: 2 fans available -Price: per piece -Dimensions: 970/770/H660 mm -Weight: 46 kg

Roller conveyor, conveyor belt, roller conveyor belt, roller conveyor, turning station, turning unit -driven roller conveyor with driven slewing ring -Roll width: 720 mm -Roller conveyor length: 1500 mm -Roll diameter: 90 mm -driven: via sprockets -Geared motor: 0.55 kW -Speed: 18.9 m/min -Slewing ring driven: 0.18 kW 31.5 rpm -Dimensions: 1510/900/H695 mm -Weight: 314 kg

Adjustable geared motor, variable speed geared motor, electric motor -Motor power: 0.75 kW -Speed range: 40 to 210 rpm -Motor: adjustable -Design: B3 -Height of shaft center: 160 mm -Shaft diameter: 28 mm -Protection class: IP 55 -Dimensions: 520/220/H300 mm -Weight: 34 kg

Pipe saw, pipe jigsaw, support jigsaw, reciprocating saw, handsaw Ideal for sawing work even in wet, damp rooms and shafts, wherever electric reciprocating saws are not permitted. -Output power: 1000 W -Steel pipes: up to max. Ø 160 mm -in the suitcase -Number: 4 saws available -Price: per piece -Dimensions: 690/200/H120 mm -Weight: 8 kg

For glass scale, rule, digital display, measuring stick, length measuring system, linear scale, fluorescent display, glass scale, rule, length measuring device, linear scale, position indicator, digital scales, digital scale -for: turning and milling machines -Manufacturer: Anilam -Type: MicroWizard A160210 -Number: 1x ads available -Price: per piece -Dimensions: 300/260/H150 mm -Weight: 3.2 kg

Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Quantity: 1x unit available -Dimensions: 400/180/H500 mm -Weight: 32 kg

Roller conveyor, roller track, powered roller conveyor, roller track -with pneumatically driven lifting mechanism -stable design -electrically powered -Drive motor: 0.37 kW 71 rpm -Roller width: 1450 mm -Conveyor length: 1400 mm -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm - Delivery height: 950 mm, adjustable -driven: via belt -Dimensions: 1400/1650/H960 mm -Weight: approx. 230 kg

Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: SEM Andras, brushless servo motor type HR115A6-88S -Speed: 6000 rpm -Voltage: 530V -Torque: 3.7 Nm -Shaft: Ø 19 x 40 mm -Brake: 24VDC 10Nm -Number: 2 engines available -Price per piece -Dimensions: 275/115/H145 mm -Weight: 7 kg/pc.

Servo drive, servo card, output module, CPU card, input processor, power pack, control card, input card, controller, converter, controller, servo module, axis amplifier, DC converter, axis amplifier, velocity control unit -Manufacturer: Andrive, Servo Drive Type A4 ZAM 006 -Number: 3x servo module available -Price per piece -Dimensions: 310/220/H105 mm -Weight: 5.7 kg/pc.

Tool holder, milling holder, milling tool, adapter, intermediate sleeve, presetting device -Milling holders: Adapter for tool presetting device 7 pieces -Types: HSK 63 HSK 100 SK 40/50 ANSI/CAT see photos -Levy/Price: complete -Total dimensions: 500/300/H170 mm -Weight: 34.4 kg

Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: Ankerwerk Nuremberg AEG, geared motor with brake -Gear: Armature movement CAM 76 N 1 i= 33 -Speed: 43 rpm -Engine: AEG type AM 80 N4 -Power: 0.75 kW / 1400 rpm -Shaft: Ø 32 x 78 mm -Dimensions: 525/240/H275 mm -Weight: 50 kg

Gear motor, electric motor, electric gear motor, spur gear motor -Manufacturer: Ankerwerk Nürnberg AEG, gear motor with brake -Gearbox: Lenze 1 i= 31.5 -Speed: approx. 45 rpm -Engine: Katt type FN112 M 4 kW / 1430 rpm -Brake: Lenze 60 Nm -Shaft: Ø 60 x 120 mm -Dimensions: 940/390/H360mm -Weight: 145 kg

Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, transport screw, screw conveyor, conveyor technology, tubular screw conveyor -Cell wheel lock. 8 blades, with drive -Speed: 49 rpm -Drive motor: CHT 0.75 kW -Inlet/outlet: 250 x 130 mm -Dimensions total: 510/490/H280 mm -Weight: 50 kg

gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: Motovario, adjustable gear motor -Gearbox: Type TKR / 5 40 - 210 rpm -Engine: Ansaldo type A1C0712C A249 0.37 kW -Shaft: Ø 24 x 50 mm -Design: B3 -Dimensions: 460/190/H210 mm -Weight: 21 kg

Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller, process controller -Temperature controller: analog, 0 to 35 °C -Adjustment: with key, see photos -Voltage: up to 380 volts -Switching capacity: 30W / 50VA -Transport dimensions: 330/300/H150 mm -Weight: 1.5 kg

Double piston screen changer, double piston screen changer for extruders, co-rotating twin screw extruder, twin screw extruders, plastic injection molding machine -Manufacturer: Anji, Continuous twin-piston screen changer -Type: AJ -Individual components: see photos -Submission/Price: complete -Dimensions: 1140/880/H495 mm -Weight: 313 kg

Key data: 2500 mm, 1000 mm, 1100 mm

CNC Bed Milling Machine Manufacturer: Anayak Type Performer 2500 Year of manufacture 2007 Control Heidenhain iTNC530 ( with new monitor ) Table size 2700 x 850mm Load 6,000kg Travel X/Y/Z 2500/1000/1100mm Tool holder SK50 IKZ Internal Coolant Supply Chip conveyor Electronic Handwheel Heidenhain HR410 Head cannot be swivelled over program Engine on: 54.205h Spindle on : 14.850h Without the accessories that can be seen.

-Metal Detector -Manufacturer: S+S Separation and Sorting Technology GmbH - Type: Ecoline 750/300/100 -Mains voltage: 230 / 115 VAC - Frequency: 50/60 Hz

Roller conveyor, roller track, powered roller conveyor, roller track -with pneumatically driven lifting mechanism -stable design -electrically powered -Drive motor: 0.37 kW 71 rpm -Roller width: 1450 mm -Conveyor length: 1400 mm -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm - Delivery height: 950 mm, adjustable -driven: via belt -Number: 3 stations available Price: per piece -Dimensions: 1400/1650/H960 mm -Weight: approx. 230 kg

Roller conveyor, roller track, powered roller conveyor, roller track -with pneumatically driven lifting mechanism -stable design -electrically powered -Drive motor: 0.37 kW 71 rpm -Roller width: 1450 mm -Conveyor length: 1400 mm -Roller diameter: 105 mm -Rollers: rubberized -Shaft diameter: 25 mm - Delivery height: 950 mm, adjustable -driven: via belt -Dimensions: 1400/1650/H960 mm -Weight: approx. 230 kg

Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data Capacity: up to 20,000 bph Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB Application: Water, CSD, or other beverages in returnable glass bottles Condition: Line in good condition Availability: Immediate Status: Still installed and connected   Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2, ...

Brand SEW Eurodrive Type RF07 DT56L4/AND8 Voltage Volt 3 fase 400 volt Force KW 0,12 KW Rotational speed RPM 284 RPM Shaft size mm 20 mm Flens pasrand 80 mm Units in stock 1 Length 30.00cm Width 20.00cm Height 10.00cm All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)