128,857 used machines on RESALE, but how to find them? Machine Search
Metal Detector Loma Systems EMC90541-14363 -Metal detector -Manufacturer: Loma Systems -Weight 185cm -Inlet tunnel: 35cm wide and 11.5cm high -380 Volt 3OPh 50Hz
Aircooled chiller/Heat pump EMICON PAE 4902 S KC 488 kW / 570 kW Cooling capacity: 488 kW / 138.76 tons (12/7 — 35°C) Heating capacity: 570 kW / 162.08 tons (40/45 —7°C) Year of manufacture: 2013 Options: Heat pump. Hydraulic module. Recuperation. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 3 pcs. Copeland ZP385KCE-TWD 522 (scroll) + 1 pcs. Bitzer GSD80385VAB4-2 (scroll) + 2 pcs. Bitzer GSD80295VAB431 (scroll) Type of refrigerant: R410a Number of fans: 8 pcs. (EC-fans) Hydraulic module: 2 pcs. water pump Wilo DL80/160-11/2, expansion vessel. + 1 pcs. water pump Wilo IPL65/170-1.1/4 (Recuperation) Dimensions: 4.85x2.3x2.56 m Weight: 4495 kg Condition: Good
EMA high-frequency welder with chiller EMA High Frequency Welding Machine MFA with Thermotec PT2000 water cooling system Range of welding machine 0 - 1000 ° C MF Output: 80A Frequency MF-Gen.: 10 KHz Mains connection: 380V 106 A Foot pedal Water cooling, chiller Thermotec PT2000 Dimensions approx. L1500x W730x H1900mm Volume 1730 Ltr. YEAR: 2004 The drip tray is not included in the scope of delivery.
We sell 10 x EMC Centera nodes 1 x EMC Celerra VNX5500 Complete configuration on request. In most cases, the entire lot can only be handed over in its entirety. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many more refurbished/used hardware from the areas of the systems mentioned here as well as from the areas of other systems from these manufacturers available: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at low prices from HASCON! Sales are only made to companies. We have available complete systems and compo ...
Lathe Emco turn 365 tcmy , energized Year of Make: 2003 Operating hours: only 4893.3 h Condition: Very good Technical details • Control: Siemens Sinumerik 810 D • X-axis travel: 210 mm • Z-axis travel: 610 mm, programmable tailstock • Y-axis travel: +- 40mm • Circumferential diameter over face slide: 360 mm • Spindle size: 65 mm diameter/passage • Tool carrier: 12-cavity tool turret • Tool holder: VDI 30 • Powered stations: 12 • Speed range driven tools: 0 – 4,000 rpm • Rapid traverse X/Z axis: 24 m/min • Feed force X/Z axis: 5,000–7,000 Nm • Contact force: 8,000 Nm • Workpiece size with tailstock: 200 × 520 mm diameter Machine Details • Dimensions: 4.0 x 2.5 x 2.5 m • Weight: 6 t • Operating voltage: 400 V • Frequency: 50–60 Hz • Rated current: 29 A Equipment: Oil cooler Parts catcher Accessories: Power chu ...
max. tool diameter: 400 mm : 180 mm operating pressure: 2 bar ROTATHERM chamber washing systems are used in all areas of industry and Craftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used. The parts are cleaned like in a dishwasher. Inserted into one Wire mesh basket they are in the closed device with a hot Lye shower washed from all sides. The machine will be selected after the Temperature and washing time set in operation. A centrifugal pump promotes the Washing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive) After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting the the pump is automatically put out of operation. ROTATHERM chamber washing systems are available in ...
Fully Mainly Recycled 10,000 euros excluding VAT Warranty, samples and training included in the price. 1 year warranty
max. tool diameter: 400 mm : 310 mm operating pressure: 2 bar ROTATHERM chamber washing systems are used in all areas of industry and Craftsmanship for cost-effective cleaning of a wide variety of items to be cleaned and materials used. The parts are cleaned like in a dishwasher. Inserted into one Wire mesh basket they are in the closed device with a hot Lye shower washed from all sides. The machine will be selected after the Temperature and washing time set in operation. A centrifugal pump promotes the Washing water circulates to the nozzle system, which at the same time moves the basket in offset rotation. (Optional electric basket drive) After the cleaning process is complete, the device switches off automatically. the Parts can also be removed beforehand. In this case, when lifting the the pump is automatically put out of operation. ROTATHERM chamber washing systems are available in ...
GENERAL Project No.: 905398 Quantity: 1 pcs. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of construction: 2001/2022 State of condition: Refurbished machine Layers approx.: 2-3 layers DESCRIPTION TURN circulation diameter over bed cover 210 mm chuck diameter 170 mm speed main spindle 7500 1/min power main spindle at ED 10-40/100% 25/16 kW torque main spindle at ED 10-40/100% 134/85 Nm Spindle diameter in the front bearing Main spindle 80 mm Spindle flange size main spindle size 5 (DIN 55026) Axes on the main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm rapid traverse speed in X/Y/Z main spindle unit 60/-/30 m/min Feed force in X/Y/Z main spindle unit 5000/-/5000 N Direct displacement measuring system main spindle unit X/Z Full clamping cylinder on the main spindle Revolver bottom Number of stations/driven by 12/12 Tool ho ...
Handy edge milling machine 230V. Scope of delivery as shown. Edge milling up to 7mm, round edge milling up to R3mm. Angle adjustable. HM plates rotatable and replaceable. This new machine comes from a warehouse clean-up. Scope of delivery incl. chip catcher (not shown here).
A CNC vertical turning machine EMAG is available. Workpiece diameter: 100mm, max. workpiece length: 150mm, max. chuck diameter: 160mm, travel X/Z: 650mm/375mm, travel Y: +/-50mm, spindle power: 18kW, torque: 77Nm, speed: 6000rpm, tool stations: 12, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 2500mm/1800mm/2800mm, weight: approx. 4500kg, operating hours: approx. 28487h, spindle hours: 18640h. Including extraction system, 2 axial and 2 radial driven tools, 20x fixed tool holders, 3-jaw chuck, and measuring probe. Documentation available. On-site inspection possible.
Operating hours: 600h Specifications: Travel in X/Y/Z: 450 / 350 / 400 mm Distance from spindle nose table: 230 - 630 mm (horizontal milling spindle) Rapid traverse speed X/Y/Z: 5000 / 5000 / 5000 mm/min Working feed X/Y/Z: 10 - 2000 mm/min infinitely variable Max. feed force in X/Y/Z: 10 / 10 / 15 kN Clamping surface: 800 x 400 mm (rigid angle table) Max. table load: 30 kg (rigid angle table) Vertical milling head: Speed range: 10 - 5000 1/min Power: 10 kW Dimensions (LxWxH), approx.: 1980 x 2030 x 1990 mm Weight, approx.: 2270kg Equipment: - Swivel control panel - Shafts and gears hardened and ground - Digital display Sinumerik 828D - Clockwise / counterclockwise rotation of the main spindle - Linear guides - Four-bearing milling spindle radial/axial - All pinch points eliminated by covers - Main motor with spindle brake
Liebert Emerson M31UA Cooling System Perimeter Cooling for Data Center Environments Cooling capacity: 31 kW Air distribution: Downflow Version: air-cooled Datasheet under this link Item condition: used More items - new and used - can be found in our shop! International shipping costs on request!
10 colors Age : 2005 Complete rail system Unwinder 1 meter roll diameter Splice detector Web breaking detectors Teknek cleaning system Corona Antistatic system 6 printheads with IST UV units : 10 Ink pumps : 3 Sensotec control register system Rotary diecut ( K1B Gap Master) AVT inspection system Rewinder : compatible between both presses, need to choose Cold Foil Unit ( Unwinder+Rewinder) : compatible between both presses Cold Foil pressure cilinder : 3 Cold foil small cilinder : 3 Screen Printhead Gen I : 2 available for both presses, need to choose Screen Printhead Gen II : 2 available for both presses, need to choose Screen Printhead Gen III : 2 available for both presses, need to choose Mounting Device : 2 available for both presses, need to choose More ink chamber : 2 available for both presses, need to choose Mounting Device More ink chamber Tool List on re ...
ELECTROMASHSTAN EMC-SP/3/05 Sigma roll forming line was built in 2019 in Ukraine by ElectroMashStan. The line is designed for the production of precision Sigma-type cold-formed profiles, which are used in among others steel structures, load-bearing elements and supports. The production cycle is fully automatic, thanks to the use of an automatic sheet decoiler. The strip with a maximum thickness of 3 mm is uncoiled towards the workspace, where it is formed using rollers. The ELECTROMASHSTAN roll forming line offered is fully complete. Applications for Sigma profiles: – steel constructions (halls, warehouses, industrial buildings) – prefabricated buildings and light steel construction systems – load-bearing elements (girders, columns, beams) – brackets, bracing and structural frames – wherever a high load-carrying capacity is required in a relatively lightweight construct ...
Key data: 600 mm, 200 mm
Machine : Rigid angle tables for milling machines Make : EMCO unused – slight traces of storage Clamping surface : 600x200mm, 4 T-slots 12mm, spacing 45mm Vertical: Hole spacing: 90mm/390mm, for T-slot 12mm Dimensions: Length :60cm ; Width : 20 ; Height : 18cm; Weight: 44 kg PRICE : € 480,- Even larger MAHO or lids, ... Mounting plates: A - Length : 240mm ; Width : 120mm ; Height : 35; 3 T-slots 11mm spacing 45mm, (1x) PRICE : € 100,- B - Length : 420mm ; Width : 125mm ; Height : 46; 2 T-slots 11mm spacing 90mm (4x) PRICE : € 100,- C - Length : 520mm ; Width : 180mm ; Height : 56; 3 T-slots 12mm spacing 45mm (1x) PRICE : € 150,- D - Length : 600mm (660); Width : 180mm ; Height : 75; 2 T-slots 12mm spacing 90mm (3x) PRICE : € 180,-
Qty.1 Second-hand deep drawing press Mfc.: LVD Co. Type: EMF-TWI- 200SP Built: 1982 Stopped production in 2002 Tested in 2012 In operation condition! Max. pressure: 200 T (2000 kN) Max. oil pressure: 300 bar Max. hydr. stroke: 2300 mm Max. distance table – ram: 4500 mm Motor power: 250 HP (187 kW) Table & ram dim.: dia. 300 mm Closing speed: 160/80 mm/sec. Working speed: 3507175 mm/sec. Cushion Max. capacity: 2 x 1000 kN Max. oil pressure: 300 bar Max. hydr. stroke: 2000 mm Table dim.: 1800 x 1800 mm Motor power: 75 HP (56 kW) Plate holder Plate holder dim.: 250 mm Plate holder stroke: 1000 mm Motor power: 25 HP (19 kW), 3 x220 V Weight: 75 Ton Pumps Main pump: 3 x A7V355LV 1RPFHO Pilot pump: Vickers V210-5-1A-10-5214 Tank Volume: 3350 L
Type MZUT- EMBF 15 C Working capacity 15 liters Minimum working capacity ~ 5 liters Total capacity ~ 26 liters Tank inner diameter 294 mm Steel grade in contact with product 1.4301 Fastener Seal Material FPM, NBR, PTFE, EPDM Task Mixer Weight ~ 276 kg Height ~ 1630 mm Length ~ 1390 mm Width ~ 720 mm EMBF Emulsifier Emulsifier drive Electric motor 5.5 kW, 2890 rpm Emulsifier rotation Continuously 1500-5500 rpm Emulsifier rotation during CIP Max 4500 rpm Heating jacket heating tank (7 kW) Minimum / maximum temperature in the tank 5 / 95° C Minimum / maximum operating temperature in the tank 20 / 90° C Minimum / maximum jacket temperature 5/ 130° C Minimum / maximum operating temperature in the jacket 25/ 120°C Permissible tank pressure 0 bar Maximum jacket pressure 4 bar Electrical power supply 3x400V+N+PE, protection 50 A Power Consumption -15kW Tank Lighting L ...
4 Axes CNC Machining Center for working of bars of aluminium, PVC, light alloys in general and steel pieces up to 2 mm X AXIS (longitudinal) (mm) 4.000 Y AXIS (transversal) (mm) 270 Z AXIS (vertical) (mm) 420 A AXIS (electrospindle rotation) 0° ÷ 180°
Stock Number: 3780 CNC LATHE Manufacturer: EMCO, Type: HYPERTURN 665 MC PLUS Machine NO.: R7AQ2301, Year of manufacture: 2002 Specifications: Max. swing diameter 430 mm dia. Max. rotary. About Bed 600 mm Dia. Turning length 744 mm Distance between spindle lugs 975 mm Main engine power 21/29 kw Main spindle speed range 0-5000 rpm Bore through drawing tube 65 mm dia. C axis - main spindle movement 0.001 degree Y axis 100 +/- 50 mm B Axis Movement Stepless 45 Degree Tool turret 1 with 12 VDI 30 stations Powered stations turret 1 12 pc. - 4000 rpm Y+B pieces. Engine power driven tools 6.7 Kw Tool turret 2 with 12 pc. VDI 30 stations Counter spindle C axis - counter pindel movement 0.001 degree Counter spindle speeds 0-5000 Pr/min Motor power counter spindle 17/22 Kw Control Siemens 840 D Fabr. Power on 10650 hours Controlled in 8 axis - x1-x2-z1 ...
Control Siemens 828D - ShopTurn Rotary diameter. [mm] 500 Turning length [mm] 520 Main spindle: Belt spindle technology Speed 5,000 rpm Power (max.) 22 kW Torque (max.) 305 Nm Bar passage 65 mm Workpiece clamping 3-jaw chuck, SMW Autoblok 210 BB Tool carrier (X/Y/Z): Technology Turret with 12 stations Tool holder VDI 30 Tool drive 5,000 rpm, 5 kW, 20 Nm Travel in X/Y/Z 260/80/610 mm Rapid traverse in X/Y/Z 30/15/30 m/min Tailstock: Technology Hydraulically driven Contact force (max.) 8,000 N Stroke 500 mm Cone MK4 Equipment/accessories: Chip management chip tray Coolant management IKZ pump with high pressure, 14 bar Raw material feed interface bar feeder prepared Precast Removal Parts Catcher with Conveyor Belt Tool holder Div. gebr. rigid and driven holders Other equipment Rinsing gun
Technical data of the used Calandra Sertom EMO 31-25: - Upper roller table length: 3100 mm - Side roller table length: 3100 mm - Upper roller diameter: 400 mm - Side roller diameter: 350 mm - Maximum opening between rollers: 75 mm - Maximum load on the upper roller: 1950 KN Roller rotation speed: 2,5-5 m/min Weight: 17000 kg Machine dimensions: 5800x2350x1800 (H) mm
Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor, high-current resistor -Manufacturer: Ifo, 4 pieces EMF 50 6.8 ohms in series -Dimensions: 200/50/H110 mm -Weight: 0.4 kg
Three-phase motor, electric motor -Power: 1.9 kW -Speed: 2800 rpm -Shaft: Ø 18 x18 mm -Construction: B14 -Protection class: IP54 -Dimensions: 355/115/H150 mm -Weight: 15 kg
Power supply, power supply, DIN rail power supply, switching power supply -Manufacturer: EMS, Power Supply -Type: D602 -Input: 115/230 V 50/60 Hz -Output: 5 V 500 mA -Dimensions: 115/100/H50 mm -Weight: 0.7 kg
Transformer, transformer, converter, three-phase autotransformer -2 pieces: three-phase transformers DTST 7.5 -with: additional electronic modules -Primary: 400 V -Power: 5.5 kVA each -Dimensions: total 200/430/H740 mm -Total weight: 164 kg
Three-phase motor, electric motor -Transfer: in the current condition as seen -Slight damage: on the fan housing -Power: 1.9 kW -Speed: 2800 rpm -Shaft: Ø 18 x18 mm -Construction: B5 -Protection class: IP54 -Dimensions: 360/140/H150 mm -Weight: 16.7 kg
Three-phase motor with 2 speeds, electric motor -Power: 2.7/3.3 kW -Speed: 1420/2850 rpm -Design: B5 -pole-reversible -Protection class: IP 54 -Dimensions: 355/250/H200 mm -Weight: 27 kg
Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVE 012/PCN 806734 -Connections: 1/2 ODF -Dimension box: 135/95/H50 mm -Weight: 0.3 kg.
Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVE M10/PCN 806733 -Connection: 10 mm -Dimension box: 135/95/H50 mm -Weight: 0.2 kg
Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVA M12/PCN 015341 -Connection: 12 mm -Dimension box: 220/80/H90 mm -Weight: 0.5 kg
Wire electrode, SG2 welding wire, welding wire -Böhler: EMK 6 D -AWS. ER70S-6 -Wire thickness: 0.8 mm -Price: per piece -Quantity: 2 pieces -Weight: 15 kg
Electric motor, three-phase motor -Power: 1.2 kW -Speed: 1400 rpm -Shaft: Ø 24 mm -Construction: B3 -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 335/127/H186 mm -Weight: 13.5 kg
Fan, fan, electric motor, blower -Speed: 1300 rpm -Fan diameter: mm -Dimensions: 82/82/H86 mm -Weight: 1.3 kg
Three-phase motor, electric motor -Power: 1.5 kW -Speed: 2820 rpm -Shaft: Ø 24 x 30 mm -Construction: B14 -Protection class: IP 54 -Dimensions: 300/230/H170 mm -Weight: 13.1 kg
Three-phase motor, electric motor -Power: 9.2 kW -Speed: 2900 rpm -Shaft: Ø 38 x 60 mm -Construction: B5 -Protection class: IP 54 -Number: 3x available -Price: per piece -Dimensions: 450/310/H257 mm -Weight: 55 kg
Electric motor, three-phase motor -Power: 5.5 kW -Speed: 2870 rpm -Shaft: Ø 38 x 70 mm -Construction: B5 -Price: per piece -Number: 2x available -Dimensions: 455/326/H250 mm -Weight: 56 kg
turning diameter: 200 mm turning length: 0,0 mm control: Siemens 810 D working spindle speed range: 4200 U/min travel -x axis: 210 mm travel -z axis: 610 mm spindle passage: 65 mm total power requirement: 0,0 kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
EMDE BFR 1500 Big-Bag Filling System with bag inflation system for the dust-free precise and reliable filling of big bags, max. load 1000 kg, electrics 400V/50Hz, power consumption 0.5 kW, capacity up to 40 big-bags per hour
brake motor, electric motor, three-phase motor -Power: 0.25 kW -Speed: 2800 rpm -Shaft: Ø 11 mm -Design: B14 -Protection class: IP 54 -Quantity: 2 available -Price: per piece -Dimensions: 275/122/H185 mm -Weight: 6.6 kg
max. tool diameter: , mm 0: , mm operating pressure: , bar filling amount: 52 l Quicksonic QS 520 ------------------ Ultrasonic cleaning device with lid and work basket Usable dimensions: L 500 x W 400 x H 260 Usable basket dimensions: L 444 x W 364 x H 224 Content: approx. 52 l The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Electric motor, three-phase motor, brake motor -Power: 0.45 kW -Speed: 1300 rpm -Shaft: Ø 14 mm -Brake: 6 Nm -Construction: B3 -Protection class: IP 54 -Number: 1x available -Dimensions: 300/190/H145 mm -Weight: 8.7 kg
Electric motor, three-phase motor, brake motor -Power: 0.45 kW -Speed: 1300 rpm -Shaft: Ø 14 mm -Brake: 6 Nm -Construction: B3 -Protection class: IP 54 -Foot damaged, see picture -Dimensions: 300/190/H145 mm -Weight: 8.7 kg
Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 22.5 rpm -Performance: TA = 120 Ncm -Shaft: Ø 30 x 105 mm -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 350/290/H195 mm -Weight: 22 kg
Auriol cooking kettle Stainless, 400l capacity, steam jacketed, emulsifier with bottom mounted motor, emulsifier diameter 120mm, variable speed, auto tilt to discharge, on load cells, 3Ph
maximum number of results exceeded
please refine your search
 (11).jpg)
