amada em used for sale

For sale we offer an Amada EML 3610NT punch-laser combination machine. The offered machine is used and has 4657Bh. technical data: combined laser/turret punching press EML Z-3610 NT, Y.O.M. 11/2014, 45 tool stations, laser power 4 kW, operating hours: laser/resonator hours: 4657h, control type: AMNC-F, with resonator unit Amada/Fanuc AF 4000i-C, fabrication no. L14x40295, refrigeration & refrigeration unit, flue gas and laser dust filter system Herding MP2 -) right-sided automatic plate magazine LKI AS III MP, Y.O.M. 2015, machine weight approx. 12,000 kg -) left-sided vacuum acceptance & stacking device / single sorting PR 3 300 L 2P, Y.O.M. 2013, power consumption 8.5 kW, weight approx. 4,800 kg Basic installation approx. 20 x 10 m, total H (magazine) approx. 6 m The price is only valid for the machine, without dismantling, transport and commissioning. If you have any  ...

AMADA EM 2510 NT Turret punching (year 2012) AC servo Direct twin drive Punching hours: 14271 h Machine on hours: 29580 h Excellent maintenance Punching force: 200 kN Work field: 1270 x 2500mm With replacement: 1270 x 5000mm Thickness max. of the material: 3.2mm ( ST-400N/mm2 ) Maximum material thickness: 3.2 mm. (brush table) Swan neck: 1,310mm Max weight of the piece: 50kg (F4) 150kg (F1) X-axis feedrate: 100m/min Y-axis feedrate: 80m/min Control: Amada AMNC-PC RS-232C serial interface Simultaneous axes speed: 128m/min Turret traverse speed (bidirectional): 30 1/min Max cadence punching with dies VACUUM” (hit rate): 500/min (5mm stroke, 25.4mm pitch) 780/min (5mm stroke, 1mm pitch) 1800/min (1.4mm stroke, 0.5mm pitch) Stroke length: 36 mm. Punching accuracy: ±0.07mm C axis speed: 60 rpm Stations: 45 of them 4 AMADEX Diameter max. tool: 114.3mm Tool change  ...

Servoelectric punching machine AMADA EMK 3610 NT Punching force 300 kN Working range: 2500 (up to 5000 mm) x 1525 mm AMNC F Control Max sheet thickness 4.5 mm Revolver with 58 stations: 24 x A (max diameter 12.7 mm) 24 x W (max. 31.7 mm) 4 x C (max diameter 50.8 mm) 2 x D (max. 88.9 mm) Automatic indexing: 2 x W (max diameter 31.7 mm) 2 x E (max. diameter 50.8 mm) Machine dimensions LxWxH: 5430 mm x 5120 mm x 2320 mm Machine weight 24500 kg

Working hours 14272 hours Control unit Amada AMNC-F Punching force 20 Ton Metal length 2500 mm Metal width 1270 mm Sheet thickness 3.2 mm Metal width with repositioning 5000 mm Weight of the workpiece 150 kg Dimensions L 6080 x W 5120 x H 2318 mm Weight 16500 kg

This AMADA EM2510NT Punching machine was manufactured in the year 2004.

Working hours machine: 61.000 h Laser power: 4000 Watt Max. punching force: 300 kN Control: AMNC-F Working range laser: 2500 x 1525 mm Working range punching: 3050 x 1875 mm Length: 6354 mm Width: 5880 mm Height: 2517 mm Machine weight: 30000 kg Electrical connected load: 85 kVA x-axis: 100 m / min y-axis: 80 m / min simultanes (x and y): 128 m / min

AMADA HFE 170-3 L CNC press brake was built in France in 2000. The machine designed for bending workpieces with a maximum length of 3100 mm, has seven numerically controlled axes (Y1, Y2, X1, X2, R, Z1, Z2) and 170 tonnes of press force. This allows for very high machining accuracy and, thanks to the deflection arrow compensation function, the desired angle is present along the entire length of the bent sheet. All machining parameters are programmed on the intuitive and easy-to-use AMADA CNC control located on the arm. The press was used for 15656 hours (5.5 years of operation at 8 hours per day). The total weight of the press brake is 12400 kg. Technical data of the AMADA HFE 170-3 L press brake - CNC controller: AMADA - maximum press force: 170 t (1700 kN) - number of numerically controlled axes: 7 (Y1, Y2, X1, X2, R, Z1, Z2) - maximum workpiece length: 3100 mm - deflection  ...

AMADA EUROPE 258 punching machine was manufactured in 2000 in Japan. The machine designed for processing sheet metals with a maximum thickness of 6 mm guarantees the highest accuracy and quality of punching, thanks to the use of a precise slider with a hydraulic stroke. This solution, combined with its high reliability and high pressing force, makes the EUROPE 258 punching machine stand out significantly from other machines of its type. In order to allow the user to perform a wide range of machining operations, the machine has been equipped with a capacious turret magazine with 27 workstations (including 3 auto-index stations) with space for tools for many different tasks. In addition, the entire workspace has been protected by SICK safety curtains to ensure the highest level of operational safety. The AMADA hydraulic punching machine weighs 10500 kg. Technical data of AMADA EUROPE ...

The machine has undergone a thorough inspection by an authorized AMADA service technician CNC laser cutting machine Amada LC3015 X1 NT 4KW with sheet metal magazine Year of construction: 2008 Type: Amada LC3015 X1 NT Laser power: 4kW Table: 3,000 x 1,500 mm Sheet metal magazine: Amada AS LUL 300X1 Cooler Ridel Donaldson Suction

Hydraulic press brake: AMADA type ITPS 100-3. Bending length: 3100 mm; Between columns: 2650 mm, Loading: 350 mm, stroke 105 mm; Pressure: 100 t CNC Ema press, graphics. Controlled axes -Y-X1-X2-R1-R2 + automatic compensation of table bend. Quick-change Amada-type punch holder. Machine weight 7 t. Drives 9 kW. Tools - complete set, Amada standard sectioning tools - 2 SLOT V16 and 24 mm die + Amada Amanit Punch. Full original DTR, workplace health and safety instruction in Polish.

AMADA VIPROS 358 KING punching machine was manufactured in Japan in 1999. The machine is designed for precise punching of holes in workpieces having a maximum length of 1250 mm, 3000 mm width and 50 kg weight, made of mild steel, stainless steel or aluminium. Low noise level and protection of the sheet metal surface from scratches and scrapes caused by the punching process are guaranteed by a machine brush table equipped with two hydraulic clamps to hold the workpiece during the machining process. The punching machine is able to perform up to 1200 punches per minute with a press force of 30 tonnes. The machine is equipped with a FANUC AC Servo X and Y axis drive, 58 tool stations (including four auto index stations) and a control panel with a installed FANUC Series 18-P CNC controller for full control of the punching machine operation. The AMADA VIPROS 358K punching machine has been r ...

Capacity: 130 t Folding length: 3140 mm CNC Brand: Amada Make Amada HFT 13 Type HFT 1303 CNC Year 08 . 2002 Amada abkantpresse pressbrake kantbank hft Capacity (metric tons)Length = 3.140 Folding length (mm)B Column = 2.700 Down stroke or Up stroke Force = 130 Ton Tandem type Troath = 420 mm CNC CD 2000Y1 / Y2 / X / R Large tooling package  

Equipment for stamping sheet material produced by Amada is on sale. Machine Vipros 358 King was produced in 1999 in Japan, force 30 t, revolver 58 stations with 4 auto index, brush table type, processing area 1270x4000 mm, maximum sheet thickness 3.2 mm. The equipment was serviced by an official AMADA dealer. The machine is equipped with basic tools and software AMADA and METALIX.

sheet width: 3050 mm plate thickness: 6,35 mm thickness at Niro-steel: 4,0 mm down holder: 16 Stück table length: 575 mm Control: AMADA cutting angle: 40° - 2°20 ° 0: 305 bar oil volume: 100 ltr. total power requirement: 5,5 kW weight of the machine ca.: 6150 kg range L-W-H: 3790 x 2090 x 1860 mm maintained condition () Furnishing: - AMADA NC control, swiveling control panel at the front left - Electric back stop, NC controlled - electrical/hydraulic cutting angle adjustment - electrical/hydraulic cutting gap adjustment - Sighting device & cutting line lighting to view the scribe line Shear cutting after visual outline - 1x long side stop - 1x long support arms - Safety device behind the machine - 1x freely movable foot switch - Clippings waste container - original instruction manual Special accessories: - AMADA electro-pneumatic sheet metal holding device for thin sheet metal bla ...

Hydraulic press brake: AMADA type HFB 170-40, the best model of the best manufacturer of this type of machine. Bending length: 4100 mm; Between columns: 3750 mm Loading: 400 mm, stroke: 180 mm; Pressure: 170 t CNC controlled press Delem DA58, graphics, Polish language. Axes controlled -Y1-Y2-X1-X2-R1-R2 + automatic compensation of table bending . Machine weight 13.5 t. Drives 13 kW. Tools - complete, sectional tools of Amada standard, Amada quick release chucks. Full original DTR, also in Polish, the BiHP workstation manual in Polish.

Power: 4 kW X - axis: 2520 mm Y - axis: 1550 mm Number laser heads: 0   CNC Brand: Fanuc CNC Model: 160i-L AMADA - LC 2415 A3 CNC Laser cutting machine 4kW 2500 x 1500 mm MACH - ID 6348 Make: AMADA Type: LC 2415 A3 Control: Fanuc 160i-L YOP: 2004 Hours: 11753 Working area X Axis    2.520 mm Working area Y Axis    1.550 mm Working area Z axis         300 mm Table Length          2.550 mm Table Width            1.550 mm Power resonator      4 kW kW / Amp Feed rate X-Axis      80,000 mm Feed rate Y-Axis      80,000 mm Feed rate Z-Axis      80,000 mm Sheet master loading arm     Yes Sheet tower storage        Yes Dust collector  ...

Capacity: 220 t Folding length: 4200 mm CNC Brand: _Unknown / Other CNC Model: Operator AMADA - HFBO 220-4 CNC Pressbrake 4200 x 220 Ton MACH - ID 6330 Make: AMADA Type: HFBO 220-4 Control: Operateur YOP: 1994 Max. bending length    4.200 mm Distance between column     3.760 mm Max. pressing force     220 T Dis. Beam – Table       450 mm Beam stroke        180 mm Troth beam          410 mm Approch speed       100 mm Working speed        7,5 mm Return speed           75 mm Adjustment X-Axis back gauge       1.000 mm Number of controlled axis       4 Control      Operateur 8 Axis Crowning&nb ...

Capacity: 100 t Folding length: 3110 mm CNC Brand: Amada CNC Model: AB PAD Max. bending length:        3110mm Distance between column:    2705mm Max. pressing force:        100T Dis. Beam - Table:          470mm Beam stroke:                200mm Troth beam:                 420mm Approch speed:              100mm/min. Working speed:              10mm/min. Return speed:               100mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis:  4 (Y/X/R/Z-Axis) Control:                    AMADA AB Pad 10,4" TOUCH Power:      &nbs ...

Sheet thickness: 6,00 mm Sheet width: 3000 mm Depth rear gauge: 1000 mm MACH-id  3518 MAKE   AMADA Promecam TYPE  GPX 310 - 6 YEAR  90 er SPECIFICATIONS Controll   Conventionel Guillotine / Lazer / Cutting table  Guillotine   Cutting lenght   3100 mm Maximum sheet thickness  6 mm Backgauge stroke X in mm   0 - 1000 mm Power resonator kW / Amp  5.5 kW DIMENSIONS Length   3600 mm Width   2100 mm Height   2100 mm Amada gpx 310-6 guillotine shear for sale More shears on: 

Amada HF 50-12T Press brake cnc/nc Amada HF 50-12T 2005r HF 50-12T

Amada HFT 130-3L Press brake cnc/nc Amada HFT 130-3L 2007r 2007

This Amada HG-1703 Bending machine was manufactured in the year 2022 in France and has 6700 production hours. It is equipped with an AMADA AMNC3i control unit and has 10 axis. The machine has a pressing force of 1700 kN and bending length of 3110 mm.

This AMADA HFB 125 Bending machine was made in 1999 in France. It is equipped with an Amada Operatour control unit and has 8 axis. The machine has a bending length of 3000 mm.

This AMADA LC 2415 alpha 4 NT Laser Cutting machine was manufactured in the year 2011 in France and has 11750 production hours. It is equipped with an AMADA AMNC control unit. The machine has a laser power of 2,5 kW.

1.AMADA laser cutter FLC-3015 AJ with automatic material feeding and removal Shift type (X and Y axes) movable optics The type of control of the X, Y, Z axes as well as the B and CF axes at the same time Punching range X axis 3070 mm Y axis 1,550 mm Z axis 100 mm Punching speed X and Y axis 0 - 120 m / min The maximum weight of the material is 920 kg Drive type (X, Y, Z axes) Linear drive Table height 940 mm Machine dimensions (machine only) L x W x H 6043 x 2900 x 2350 mm Net weight 11,200 kg Year of production 2013 2.Laser resonator Model - AJ2000 Rated power 2000 W Resonator dimensions L x W x H 1760 x 1210 x 1530 mm Weight 800 kg 3.Herding DELTAComp 1500-8 / 9 SB 7.5 kW filter Weight 1200 kg 4.LKI MP Flexit 7 kW feeder Weight 4300 kg The number of electrified operating hours is 46,000 The number of working hours of the head operation  ...

Amada HFE 8025 Built in 2007 Machine hours: about 17,500 hours Description: - Pressing force 800 kN -Bending length 2500 mm -Control AMADA OP 2000 -System of a backgauge with 5 steered axles -Safety device type AKAS Specifications: -Maximum press force 800 kN -Length of a pressure beam 2570 mm - Clearance between posts 2125 mm -Projection 420 mm - Stroke 200 mm -Installation height 470 mm -Work table width 60 mm -Table height 960 mm -Delivery speed 1-100 mm / s -Working speed 1-10 mm / s - Retract speed 1-100 mm / s -Oil volume 90 l -Electrical connection 400 V / 50 Hz / 9 kW Dimensions: Overall length 3800 mm Overall width 2450 mm Overall height 2600 mm Total weight 5750 kg

Sells AMADA LC1212 A2 Laser cutting from 1998 With 45,000 hours of operation Laser power 1.5kW FANUC 16-L series console upgraded with LED lighting Possibility of cutting sheets with a width of 1380mm Sold with Delta Neu JetPack 40 vacuum cleaner The machine was serviced by AMADA Its use is daily, giving you the opportunity to see it in action It will be available in mid-November Removal must be carried out by you (conditioning, transport, installation) Sale for purchase of a new machine

AMADA EUROPE 245 turret press Technical data : - CNC control: FANUC 18 i-P - pressure: 20 Tons - max. 31 station non-recapture punching format: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - max. size of the cut sheet with interception: 1020 x 2540 mm - max. size of the cut sheet with interception + 1 turn (optional): 1500 x 2540 mm - max. sheet thickness on the ball table: 6 mm - max. sheet thickness on the brush table: 3 mm - max. permissible weight on the table: 100 kg - punching accuracy: +-0.1 mm - positioning accuracy: +-0.07 mm - number of clamps/pneumatic holders: 2 - number of axes controlled simultaneously: 3: X, Y, C - revolver speed: 25 rpm. - number of strokes per minute, distance 25.4 mm, cylinder stroke 6.5 mm: 220 strokes / min. - stroke punching, distance 1 mm, cylinder stroke 6.5 mm: 480 strokes / min. - minimum programmable increment: 0.001 mm - nu ...

Key data: 170 t, 3110 mm

Inv. Num. : 7140 Type: HG 1703 Producer: Amada Created: 2022 Parameters: Control system: AMADA AMNC 3i Duty cycle: 6664 h Hours: 5511 h Number of strokes: 450794 Compressive force: 170 t Maximum bending length: 3110 mm Maximum ram stroke: 250 mm Maximum lifting speed: 220 mm/s Maximum bending speed: 20 mm/s Maximum retraction speed: 250 mm/s Total power requirement: 30 kW Machine weight: 15000 kg Equipment: 5-axis backgauge Footswitch with panic stop function Angle Measuring System Digipro Safety device AKAS III Wila tenses Handwheel

Hydraulic press brake: AMADA type HFE 130-40. Bending length: 4100 mm; Between columns: 3750 mm Loading: 400 mm, stroke 200 mm; Pressure: 130 t CNC controlled press Operator II, graphics, Polish language. Axes controlled -Y1-Y2-X1-X2-R1-R2-Z1-Z2 + automatic compensation of table bending . Weight of the machine 12 t. Drives 12 kW. Tools - complete, sectional tools of Amada standard. Full original DTR, also in Polish, a job instruction BiHP in Polish.

Hydraulic press brake: AMADA type HFP 130-30 NT, rb: 2007, the highest model of the best manufacturer of this type of machine. Dual speed X,R and Z axis. Bending length: 3100 mm; Between columns: 2650 mm, Loading: 350 mm, stroke 200 mm; Pressure: 100 t CNC controlled press Amada AMNC PC, 3D graphics, Polish language, TFT screen 15 color. Axes controlled -Y1-Y2-X1-X2-R1-R2-Z1-Z2 + automatic compensation of table bending . Weight of the machine 8,5 t. Drives 12.5 kW. Fiessler lasers. The machine complies with the CE Machinery Directive. Tools - complete, segmented tools. Full original DTR, instructions for the machine and control in Polish, health and safety manual in Polish.

Hydraulic press brake: AMADA type HF 50-12, rb: 2002, a very durable model from the best manufacturer of this type of machine. Bending length: 1250 mm; Between columns: 1050 mm, Loading: 200 mm, stroke: 180 mm; Pressure: 50 t. CNC Operateur OPEII controlled press, graphics, Polish language, TFT 14 color screen. Axes controlled -Y1-Y2-X-R1-R2 + automatic compensation of table bending . Weight of the machine 3.1 t. 6 kW drives. Fiessler laser protection of the workspace. Tools - complete, segmented tools of Amada standard. Fast machine for making a large number of parts. Full original DTR, instructions for the machine and control in Polish, a workstation manual BiHP in Polish.

Hydraulic press brake: AMADA type HFB-O 2206, rb: 2000, a very durable model from the best manufacturer of this type of machines Operateur OPE II control - 8 controlled axes, visualization, Polish language Tools - a set of new tools - 4-slot die + punch, new adapters with clamps, Amada standard segment tools.

Hydraulic press brake: AMADA type HFP 1000-30 Network Technology, rb: 2005, top model of the best manufacturer of this type of machine. Dual speed X,R and Z axis. Opening of 550 mm. Long stroke increased to 350 mm Bending length: 3100 mm; Between columns: 2650 mm; Loading: 350 mm; Pressure: 100 t CNC controlled press Amada AMNC PC, 3D graphics, Polish language, TFT screen 15 color. Axes controlled -Y1-Y2-X1-X2-R1-R2-Z1-Z2 + automatic compensation of table bending . Weight of the machine 7.5 t. 9 kW drives. Fiessler lasers. Machine complies with the CE Machinery Directive. Tools - complete, segmented tools. Full original DTR, instructions for the machine and control in Polish, health and safety manual in Polish.

Hydraulic press brake: Amada type HFT 170-4, rb: 2002. Bending length: 4100 mm; Between columns: 3550 mm; Loading : 350 mm; Pressure: 170 t Stroke : 200 mm. AbPad CNC controlled press, LANGUAGE. POLISH, color, control new replaced at Amada in 2021. Protection of the workspace with Lasersafe lasers. Machine under current 20996 hrs. Axes controlled -Y1-Y2-X1-X2-R + automatic compensation of table bending. Machine weight 14.5 t. Drives 16.5 kW; Tools - Amady standard, complete,sectional . Full original DTR, BiHP stand instructions in Polish.

Hydraulic press brake: AMADA type HFBO 50-20, rb: 1999, a very durable model of the best manufacturer of this type of machine. Bending length: 2050 mm; Between columns: 1650 mm; Loading: 300 mm, stroke: 200 mm; Pressure: 50 t. CNC Operateur OPEII controlled press, graphics, Polish language, TFT 14 color screen. Axes controlled -Y1-Y2-X1-X2-R1-R2-Z1-Z2 + automatic compensation of table bending . Weight of the machine 5.5 t. 6 kW drives. Fiessler laser protection of the workspace. Tools - complete, segmented tools of Amada standard. Full original DTR, instructions for the machine and control in Polish, a workstation manual BiHP in Polish.

Hydraulic press brake: AMADA type ITS2 25-12, rb: 1996, very durable model from the best manufacturer of this type of machines Bending length: 1250 mm; Between columns: 1050 mm, Loading: 200 mm, stroke 180 mm; Pressure: 25 t. CNC-controlled Operateur OPEII press, graphics, Polish language, 14 color TFT screen. Controlled axes -Y-X-R1-R2 + automatic table bending compensation. Machine weight 2.3 tons. Drives 4.5 kW. Tools - set, Amada standard segment tools. A fast machine for making large numbers of details. Full original operation and maintenance manual, instructions for the machine and control in English. Polish, BiHP job manual in Polish.

Hydraulic press brake: AMADA type ITS 80-25, rb: 1990, very durable model from the best manufacturer of this type of machines. Bending length: 2550 mm; Between columns: 2050 mm Loading: 300 mm, stroke 105 mm; Pressure: 80 t Cybelec DNC70PS CNC-controlled press, Polish language. Controlled axes -Y-X, automatic table bending compensation. Machine weight 4.5 tons. Drives 6 kW. Tools - set, Amada standard. Full Operation and Maintenance Manual, BiHP position manual in Polish.

Hydraulic press brake: AMADA type HFBO 80-2550, rb: 1998, a very durable model from the best manufacturer of this type of machines. Bending length: 2550 mm; Between columns: 2050 mm, Loading: 300 mm, stroke 200 mm; Pressure: 80 t. CNC-controlled press Operateur OPEII, graphics, Polish language, 14 color TFT screen. Controlled axes -Y1-Y2-X1-X2-R1-R2-Z1-Z2 + automatic table bending compensation. Machine weight 5.8 tons. Drives 9 kW. Tools - set, Amada standard segment tools. Full original operation and maintenance manual, instructions for the machine and control in English. Polish, BiHP job manual in Polish.

Hydraulic press brake: AMADA type HFBO 170-4100, rb: 2000, a very durable model from the best manufacturer of this type of machines. Bending length: 4100 mm; Between columns: 3650 mm, Loading: 300 mm, stroke 200 mm; Pressure: 170 t. CNC-controlled press Operateur OPEII, graphics, Polish language, 14 color TFT screen. Controlled axes -Y1-Y2-X1-X2-R1-R2-Z1-Z2 + automatic table bending compensation. Machine weight 13.8 tons. Drives 13 kW. Tools - set, Amada standard segment tools - brand new. Full original operation and maintenance manual, instructions for the machine and control in English. Polish, BiHP job manual in Polish.

Hydraulic press brake: AMADA type HFBO 80-2550, rb: 2012, the latest model of the best manufacturer of this type of machines. Bending length: 2550 mm; Between columns: 2050 mm, Loading: 300 mm, stroke 200 mm; Pressure: 80 t. CNC-controlled ABPad press, graphics, Polish language, 14 color TFT screen. Controlled axes -Y1-Y2-X1-X2-R1-R2-Z1-Z2 + automatic table bending compensation. Machine weight 5.8 tons. Drives 9 kW. Tools - set, Amada standard segment tools. Symbolic number of hours worked. Machine condition - like new. Full original operation and maintenance manual, instructions for the machine and control in English. Polish, BiHP job manual in Polish.

AMADA VIPROS 255 (2001) punching machine Ready for transportation and installation Maintenance and disassembly carried out by AMADA technical service Hours: 31,000 Capacity: 200KN Travel method: X and Y axes move the sheet, C axis for Auto-Index, T axis for the turret Control method: X, Y,T & C simultaneously, 4 axes control Driving Motors: FANUC AC Servo (X,Y,T,C,) Maximum sheet size: 1270 mm (Y) x 1270 (X) mm With 1 reset: 1270 mm (Y) x 2540 mm (X) Maximum axle travel: 1270 mm (Y) x 1270 mm (X) Maximum axes speed: X + Y = 82 m/min Punching precision: +/- 0.07 mm Repeatability: +/- 0.03mm Turret rotation 30 rpm: Bi-directional Number of stations: 31 Auto-Index Number: 3 Maximum hole diameter: 88.9 mm Blows per minute: 1000 1mm steps. 520 8mm pitch. 340 25mm pitch. Maximum punching thickness: 6 mm. (9 mm. with special jaws) Maximum sheet weight: 110 Kgs.

Key data: 20 t

Punching Machine Manufacturer: Amada Type: Aries 245 Year of construction: 1989 CNC Control: Amada 04PA Operating hours: approx. 20,000 Punching force: 200 KN Sheet thickness (stainless steel) max.: 3 mm Sheet thickness (mild steel) max.: 4 mm Sheet thickness (aluminum) max.: 3 mm Travel: 1,270 x 1,000 mm Revolver: 20-fold (2x rotatable B-stations) Incl. complete set of tools ! Power: 11 KVA Dimensions: LxWxH = 2,700 x 3,784 x 1,950 mm Weight: 7,500 kg plus 2,500 kg foundation slab

This AMADA ENSIS-3015 AJ Fiber Laser cutting machine was manufactured in the year 2021 in France and has 15062 production hours, of which 6815 are cutting hours. It is equipped with an AMADA AMNC3i control unit. The machine has a laser power of 6,3 kW.

Manufacturer:AMADA Feed speed continuous 0 - 31 m/min Without grinding belt ; Without grinding belt fuehrung

Press brake AMADA HFE 220-3 Number of controlled axes / CNC controlled axis: 7 Condition good, ready to use, visit under electricity possible / Condition: good, in use, can be seen under power in Poland Pressure / Pressure: 2200 kN / 220 ton Bending length / working range: 3100 mm Distance between stands / distance between columns: 2700 mm Stroke / stroke: 200 mm Delivery speed / downwards speed: 1-100 mm/s Working speed / working speed: 1-10 mm/s Retraction speed / backwards speed: 1-100 mm/s Dimensions Machine / Machine's dimensions: 4.3 x 2.3 x 3.1 m Weight / Weight: 14 ton Machine has: new safety cards from Pilz, new tool clips, new keyboard of control, new stop finger Machine has: new safety cards by Pilz, new tool clamps, new CNC cover, new back gauge fingers

The turret press AMADA EUROPE 245 was produced in 2000 (machine installation: 2001). The price of the machine includes: installation and training in the use of the machine Punching machine technical data: - CNC control: FANUC 18 i-P - working time: 35,000 h - pressure: 20 t - work table: X = 600, Y = 400 - maximum punching format without intercept and with 31 stations head: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - maximum size of a punched sheet with an intercept: 1020 x 2540 mm - maximum size of the sheet to be punched with the intercept + 1 revolution (optional): 1500 x 2540 mm - maximum sheet thickness on the ball table: 6 mm - maximum sheet thickness on the brush table: 3 mm - maximum allowable weight on the table: 100 kg - punching accuracy: + -0.1 mm - positioning accuracy: + -0.07 mm - number of pneumatic clamps / grips: 2 - number of axes controlled s ...

Rated force 2200 Kn Max bending length 3340 mm Table length 3220 mm Table width 180 mm Table height 960 mm Passage between press bar 450 mm Stroke 180 mm Extension 410 mm Distance between stands 2700 mm Max Print 292 Bar Number of cylinders 2 pieces Oil capacity 190 litres Engine power 15 kW Max delivery speed 100 mm/s Working speed 1 - 7.5 mm/s Stroke speed 1 - 75 mm/s Total height with NC 2990 mm Total length with NC 3750 mm Total width with NC 2200 mm and light curtain 250 mm Total weight with NC 12500 kg Amada bending system Length 3750 mm Depth 2200 mm Height 2940 mm

Punching machine AMADA Europe 258 Punching force / Punching force 20 ton Working range / working range: 1250mm x 2000mm (4000mm with one reposition. 5000mm or more is also possible with second reposition) Hydraulic-eccentric drive / Hydraulischer Antrieb Turret / Revolver; Total number of 27 stations: Auto Indexing: 2 x B (max dia 31.7mm) 1 x C (max. dia. 50.8mm) Roller table / ball table

Press brake: Amada HFE 170-3 Year of construction / Year: 2000 CNC 8 axis: 2Y + 2X + 2Z + 2R Pressure / Pressure: 170 ton Bending length : 3000 mm Stroke / stroke max. 200mm Weight / weight: 11.6 ton