amada em used for sale

This AMADA Europe 255 punching machine was made in the year 2003 in France and has 39000 production hours. It is equipped with a Fanuc Series 18i - P control unit. The machine has a punching force of 200 kN.

This AMADA EUROPE 255 CNC Punching machine was manufactured in the year 2005 in France. It is equipped with a Fanuc Series 18i-PB control unit. The machine has a punching force of 220 kN.

Clamping device table band saw, wood band saw, firewood saw, automatic band saw, material positioning, band saw rolls, band saw roll -Band saw roll: made of Amada HA-400 W metal saw -Diameter: 595 mm -Shaft: Ø 50 x 70 mm -Recording: M16 x 2 -Dimensions: Ø 595 x 193 mm -Weight: 51 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Spare part: hydraulic cylinder from Amada HA-400W metal saw -Piston rod: Ø 28 mm -Stroke: 585 mm -Admission piston rod: M30 x 1.5 -Dimensions: 835/70/H200 mm -Weight: 17.1 kg

CO2 laser cutting machine (AMADA type FO-3015 MII NT CI) - 4000 Watt resonator w standard equipment according to the offer: travel range 3070 x 1550 x 200mm maximum thickness of cut material: Normal steel - 20mm Alloy steel - 12mm Aluminum - 10mm displacement speeds of 113m / min specially cast machine bed pallet changing system telescopic cabin - protection against radiation laser head with capacitive sensor programmable Z axis diode laser for positioning laser power control (DR) Intelligent Cut Control - (ICC) auto focus recognition of the position of the sheet Active Cut - rays telescope Clean Cut Alu Cut Power Piercing oil spray device 5 and 7.5 lenses with replaceable cartridge WACS system suction system cooling system ROTO- CI - Profile cutting unit - installed in the FO-3015 lase ...

Manually operated press brake with hydraulic driven press movement. Numerical control for positioning of the two supports for bending flange control. Maximum length of detail: 2 000 [mm] Press force: 500 [kN] Year of manufacturing: 1995 Numerical control: Amada integrated

Amada schiavi hfb 80-25 folder -model hfb 80-25 -folding length: 2.5 m -folding force: 80 tn -cnc 2k -axles: 8 axles -year 2002 -weight: 6000 kg -There is currently a fault in one of the proportional valves of one of the pistons of the y1,y2 axes. The approximate cost of the piece is €3,300 The price includes loading the machine on a truck. Transportation, unloading and start-up of the machine is not included in the price and will be the responsibility of the buyer.

AMADA, model HFT 220-3 (220 tons, 3340 mm bending length). Machine from 2003, purchased in 2004, very good condition for the year, serviced, has its power, no leaks. The machine has, among others: - Laser Safe operator safety system - modified hydraulic control to digital - new hydraulic oil and filters - 4 movable bumper fingers in the Z axis (rare configuration) - controlled CNC axes: Y1, Y2, X, R - instruction manual in Polish - lighting of the working field with LED lamps (front and center) - 230 V AC sockets at the back of the machine (2 pcs.) - serviced control box - replaced computer and PLC cooling - a set of tools visible in the picture sheet 6-8 mm few hours Accessories included (4 x 835 mm tool kit, front rests, clamps).

THE AMADA SCHIAVI FLEXA 100/30 FOLDER HAS THE FOLLOWING FEATURES: • YEAR OF MANUFACTURE: 2006 • FOLDER POWER: 10 KW • WEIGHT OF THE FOLDER: 6500 KG. • NUMBER OF AXLES: 8 • TONS (STRENGTH): 100 TN • FOLDING LENGTH: 3 M. • DIMENSIONS: 11463X4633 MM THE FOLLOWING TOOLS ARE INCLUDED IN THE PRICE: PROMECAN TYPE PUNCHES (1193, 30º, R=0.6, H=104) 100 TN/M -2PCSX835MM -1PCX415MM -1 SEGMENTED SET (2 UNITX100MM, 1 UNITX270 MM, 1 UNITX10 MM, 1 UNITX15 MM, 1 UNIT X 20 MM, 1 UNIT ) PROMECAN TYPE MATRIX (MULTI V) 100 TN/M -3 UNITS THE FOLDER IS IN OPERATION, WITH ITS MAINTENANCE UP TO DATE. THE PRICE INCLUDES THE LOADING OF THE MACHINE ON A TRUCK. TRANSPORTATION, UNLOADING AND COMMISSIONING NOT INCLUDED IN THE PRICE AND WILL BE borne by the BUYER.

The manufacturing company sells its punching machine Amada Vipros 255 (year 2000). The machine is in good working order, connected. Served according to the regulations. He worked on metal in the range of 0.5-1.2mm. Sold without tools and without stations. I can provide a video or come in person for viewing. Press capacity ... 20 tons (196 kN); Press type ... Servo controlled hydraulic; Axis travel ... 1270 mm x 1270 mm; Max. sheet size ... 1270 mm x 2540 mm (with auto-positioning); Maximum material thickness ... 6.35 mm structural steel; Maximum material weight ... 105 kg; Maximum material weight (maximum speed) ... 62 kg; Maximum hole diameter ... 88.9 mm; Number of stations ... 31 Station: 19 x 12.7 mm; 6 x 31.7 mm; 1 x 50.8mm; 2 x 88.9 mm; Auto Index 2 x 31.7mm; 1 x 50.8mm; Axis speed ... 82 m / min; Impacts per minute (step 2 mm) ... 1000 hp / 2.5 mm (Vipros Tool);  ...

Amada LC 3015 X1 NT Laser Cutting Machine with automatic pallet changer CNC Control Unit : LC20BP2 Working area : 3000X1500X120 Power : 4000 WATT Maximum working weight : 750 KG Automatic pallet changer Dust collecting device is not included!

Key data: 20 t, 600 mm, 600 mm

We offer our reliable Amada Aries-222 punching machine for sale here. The machine is fully functional. The associated tool kit is complete and the machine is fully equipped.

AMADA LC2415 III 2000 WATT CE year 2000 · Working range X 2520 Y 1550 mm with automatic repositioning X 5040 Y 1550 mm · Head height adjustment (Z-axis) 0-300 mm · Speed of movement of the sheet. X and Y 60 mt/min Max sheet thickness: Fe 12 mm - Stainless steel (Oxygen) 8 mm - Stainless steel (Nitrogen) 5 mm Aluminium 3 mm Maximum sheet weight 330 Kg · Working accuracy ± 0.01 / 500 mm · Position repeatability ± 0.01 mm · Movement of the ball screw axes · Air consumption 250 lt/min at 5.7 bar Machine weight 7000 Kg · Installed power 10 KVA LASER SOURCE · Model FANUC C 2000 C Power 2000 W Stability +/- 1% · Laser power adjustment from 50 to 2000 W CO 2 Laser Type Spoke diameter

Inv. Num. : 7215 Type: ENSIS 3015 AJ Producer: AMADA Created: 2021 Parameters: Laser ON: 9348 h Beam ON: 7276 h Laser power: 6 kW Feed length X-axis: 3000 mm Feed length Y-axis: 1500 mm Feed length Z-axis: 100 mm Machine weight: 9500 kg

pressure: 100 t chamfer lenght: 3000 mm distance between columns: 2700 mm Control: AMADA AMNC II-PC throat: 415 mm stroke: 200 mm dayligth: 500 mm adjustment of the rear stops: 600 mm table width: 60 mm number of controlled axis: 7 ajustment speed: 200 mm/sec bending speed: 20 mm/sec total power requirement: 5,3 kW weight of the machine ca.: 6,7 t dimensions of the machine ca.: m Includes: -Matrix holder for 1V matrices, pluggable, total height with holder: 140mm -Status indicator light -5-axis backgauge with stop sensor system Folding robot: ASTRO-100 NT Includes: -Standard gripper -Reposition gripper on the upper press beam -Regripping support for large workpieces - pneumatically driven Technical data see PDF attachment. Handling robot: ASTRO-MP20 Includes: -Loading table with spreading magnets -Vacuum gripper Medium and Large -Combi gripper (suction/gripping) for vertical loading -Dev ...

ALL SERVICES HAVE BEEN DONE BY THEIR SERVICE. We want to sell the punch machine of our company because we bought a laser. Amada E255 Punch Machine -All maintenance has been done by its own maintenance service. -There is no problem, it is in working condition. -The machine will be given with the programs and the sets will not be given.

Hydraulic press brake: AMADA type HFBO 50-20, rb: 1996, a very durable model of the best manufacturer of this type of machine. Bending length: 2050 mm; Between columns: 1650 mm; Loading: 300 mm, stroke: 200 mm; Pressure: 50 t. CNC Operateur OPEII controlled press, graphics, Polish language, TFT 14 color screen. Axes controlled -Y1-Y2-X1-X2-R1-R2-Z1-Z2 + automatic compensation of table bending . Weight of the machine 4.8 t. Drives 6 kW. Tools - complete, segmented tools of Amady standard . Full original DTR, instructions to the machine and control in Polish, the instruction manual BiHP in Polish.

Hydraulic guillotine - AMADA type GPX 630. Cutting length: 3100 mm x 6 mm, full CNC control. Variable angle of the knife and the gap between the knives, set by the computer after feeding the gr. and length of material. Sheet metal cutting in the range of 0.4 - 6 mm. CNC bumper departure 10 -1050 mm, retraction, programs. Machine with automatic support for long sheets of cut sheet metal at the back. Raised rear bumper. Machine weight 6.5 t. 2 supports and an angle bar at the front of the machine. The only guillotine on the market up to 6 mm, with such a low demand for electricity, the main motor only - 5.5 kW. Full original DTR in English and Polish, OHS manual in Polish. The machine is little used, the cutting knives are 95% sharp.

Hydraulic guillotine - AMADA type GPN 630. Cutting length: 3100 mm x 6 mm, Variable knife angle and knife gap. Cutting sheet metal in the range of 0.4 - 6 mm. CNC stop, departure 10 -1050 mm, retraction, programs. Machine with automatic support of long sheets of cut sheet metal at the back. Liftable rear bumper. Machine weight 6 tons. 2 supports and an angle bracket at the front of the machine. The only guillotine on the market up to 6 mm, with such a low demand for electricity, main engine only - 5.5 kW. Full original Operation and Maintenance Manual in English and Polish, BiHP position manual in Polish. The machine is hardly used, cutting knives are 95% sharp.

Bending length: 1250 mm; Between columns: 1050 mm, Loading: 200 mm, stroke 105 mm; Pressure: 25 t. CNC-controlled MB press, color. Controlled axes -YX Machine weight 1.2 tons. Drives 4 kW. Tools - set, Amada standard segment tools. A fast machine for making large numbers of details.

Hydraulic press brake: AMADA type HFT 170-3, rb: 2003 Bending length: 3100 mm; Between columns: 2650 mm 200 mm stroke; Pressure: 170 t CNC controlled press CD2000, color, language. Polish. Controlled axes -Y1-Y2-X1-X2 + automatic table bend compensation. Machine weight 11.6 t. Drives 16.5 kW. Tools - Brand new Amady standard tools - 4 SLOT + PUNCH. Upstream - 18,000 rh. Full original DTR, workplace health and safety instruction in Polish.

Inv. Num. : 7316 Type: LC 3015 X1 NT Producer: Amada Created: 2007 Parameters: Laser power: 4 kW Feed length X-axis: 3000 mm Feed length Y-axis: 1500 mm

Inv. Num. : 7227 Type: EUROPE 258 Producer: AMADA Created: 2001 Parameters: Compressive force: 20 t Maximum length of sheet plate: 4000 mm Maximum blade width: 1250 mm Maximum sheet plate weight: 100 kg Max. sheet thickness: 6 mm Total power requirement: 33 kW Stroke: 2100 mm Number of tools: 27 Machine height: 2200 mm Machine length: 4950 mm Machine width: 4400 mm Machine weight: 11500 kg

pressure: 50.0 t chamfer lenght: 2090 mm distance between columns: 1665 mm column arm: 400 mm table width: 60,0 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec stroke: 200 mm table height: 910 mm dayligth: 470 mm Number of working hours: 27.900 h total power requirement: 6.0 KW weight of the machine ca.: 4850 kg range L-W-H: 3458 x 2450 x 2450 mm maintained condition () with only approx. 27.900 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) swiveling operation - front left - CNC-controlled back gauge adjustment (X1+X2) - CNC-controlled vertical adjustment of the stop fingers (R1+R2) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device for manual movement of the axes - AMADA manual upper tool clamping system - 1x freely movable foot switch - side protection device (pivo ...

Inv. Num. : 6351 Type: Pega 30507 Producer: AMADA Created: 1997 Parameters: Compressive force: 294 kN

pressure: 100 t chamfer lenght: 3140 mm distance between columns: 2700 mm column arm: 420 mm dayligth: 470 mm stroke: 200 mm ajustment speed: 100 mm/sec working feed: 10.0 mm/sec return speed: 100 mm/sec table width: 60.0 mm table height: 960 mm oil volume: 150 L 0: 300 bar controlled axis: 8 Anzahl Number of working hours: 47.800 h total power requirement: 12.5 KW weight of the machine ca.: 7150 kg range L-W-H: 4295 x 2285 x 2635 mm maintained condition () with approx. 47.800 operating hours Furnishing: - CNC control type OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) swiveling operation - front left Tool & program library - CNC-controlled back gauge adjustment (X1+X2 axis) Adjustment range .. 700 mm - CNC-controlled vertical adjustment of the stop fingers (R1+R2) Adjustment range .. 250 mm - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - Hand control device f ...

Metal band saw, band saw machine, band saw, vertical band saw, horizontal band saw, hydr. Horizontal band saw machine, semi-automatic, band saw machine, horizontal band saw machine -Manufacturer: AMADA, horizontal band saw automatic band saw type HK-800 -Equipment: driven roller conveyor, stop system, -Saw drive: 5.5 kW -Cutting capacity flat: 90° 810 x 580 mm / 45° mm -Cutting capacity round: 90° 580 mm / 45° mm -Saw band speed: infinitely adjustable -saw band: -Coolant device: cooling water -Setting dimensions: 22000 mm/2000/H2410 mm -Transport dimension: 13 loading meters -Weight: kg

Laser Cutting Machine Manufacturer: Amada Type: LC 1212 A II 2.0 kW Year of construction: 1998 CNC control: Fanuc 16-L Operating hours: approx. 19,000 Max. travel range: X/Y/Z: 1270 x 1270 x 300 mm With resetting X/Y/Z: 2540 x 1270 x 300 mm Sheet thickness max.: 9 mm Table load max.: 220 kg Cutting speed: 0 – 20 m/min Positioning speed X/Y/Z axis: 40/40/20 m/min Positioning accuracy: +/-0.01 mm to 500 mm Repeatable positioning accuracy: +/-0.005 mm Parts disposal flap Y x X: 1270 x 530 mm Air requirement: 250 l/min Machine weight: 6,000 kg

Inv. Num. : 7433 Type: LC 3015 F1 NT Producer: AMADA Created: 2009 Parameters: 2018 GO: Resonator and Turbocharger Control System: Fanuc AF4000i-B Duty cycle: 21600 h Laser power: 4 kW Work table length: 3000 mm Work table width: 1500 mm Machine weight: 11000 kg Equipment: Vacuum Cooling system

This AMADA F0-4020NT CO2 Laser Cutting Machine was manufactured in 2005 in Japan. It is equipped with a 4 kW CO2 laser (FANUC, AF4000E). The axis travel range is: X = 4420mm, Y = 2050mm and Z = 200mm. This machine can operated with a max. worksheet weight (stand alone machine and with LST) of both 1570 kg. It is no longer under power, but all maintenance has been carried out annually and the machine is technically in perfect condition. Recently it has been professionally dismantled and is ready for dispatch. In total machine hours are at 37500. 5 inch and 7.5 inch lens holders are included. See photo gallery for more details. In addition, you will find a summary of all maintenance reports attached as PDF (German). Contact us anytime for further questions!

This AMADA LCV 3015 3KW + Automation/storage Laser cutting machine was manufactured in the year 1998 in Japan and has 69228 production hours, of which 7830 are cutting hours. It is equipped with a Fanuc FS16LB EXP control unit. The machine has a laser power of 3 kW.

This AMADA LC-2415 A3 Laser cutting machine was manufactured in the year 1999 in Japan. It is equipped with a FANUC Series 160i-L control unit and a FANUC C-3000 D laser with 3kW laser power. The laser can cut 12 mm mild steel and 6 mm stainless steel. See tech specs (DE) as PDF attached.

This AMADA ARIES 245 (1993) Punching machine was manufactured in 1993 in Croatia. This CNC Punch Press has a capacity of 200 kN (44093 lb) and 19 tools. It operates at 11 KVA power and weighs 7.5 tons (16535 lb). The power supply is three-phase with voltage options of 460/400/230/230 volts and frequencies of 60/50/60/50 Hz, with a trip current of 7.5/7.5/10/10 KA. Contact us anytime for further information.

Inv. Num. : 7488 Type: Aries 245 II Producer: AMADA Generated: Parameters: Compressive force: 200 kN Machine height: 1963 mm Machine length: 3814 mm Machine width: 2560 mm Machine weight: 11600 kg

Inv. Num. : 7489 Type: HFE 170-3 Producer: AMADA Created: 2000 Parameters: Compressive force: 170 t Maximum ram stroke: 200 mm

Offer 24162 Specifications: - max. working width 3050 mm - max. cutting capacity - at 400 N/m² strength 6 mm - at 700 N/m² strength 4 mm - Adjustable cutting angle - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs 14 pcs - Back gauge with positioning control AMADA 10 - 1000 mm - Front angle stop + support arm - Stroke rate 12 - 32 per/min - Drive 400 V / 12 kW - Table height approx. 800 mm - Space requirements incl. back gauge, without front support arms -ca. W 3800 x H 1950 x D 3200 mm - Transport width approx. 2200 mm - Weight approx. 6000 kg - With: - E - foot switch - Sheet metal holding -Mot. Material Conveyor Belt - Cutting length adjustment - Cutting line illumination

Description: YOM 2011 Serial Number: 012 Resonator: AMADA FANUC AF4000i-B Maximum power: 4kw Working Hours: 32.000 approx Control AMNC-F Travels: X:3070 mm Y:1550 mm Z: 200 mm Material thickness: Iron 20 mm Stainless steel 16 mm Aluminium 10 mm No. of pallets: 20 Gas control: Automatic Max. piece weight: 840 kg Spindle speed: X: 114 mm Y 114 mm Z: 60 mm Cutting speed: X, Y 0 to 20 m/min Power requirement: 82 kva 400v (50 hz) resonator included Air requirement: 1420 l/min (machine only) Includes: Pallet changer, ,Dust collector and Chiller , Machine dimensions: , Machine 9903x2778x2200 (exc. Pallet changer, ,Dust collector and , chiller) , , weight approx.: 20,000 kg, Approx. Onsite Dimension. (l x w x h): 11,500 x 5,130 x 2,350 mm

Description: Serial  , ,Number: 4558175 Working Hours: 31500 Turbine new Laser power: 4,0 kw Working Range: X: 2520 mm Y: 1550 mm Z: 300 mm Table loading capacity: 330 kg , Machine was dismantled by AMADA and now is stored , table length: 2,520 mm, table width: 1,550 mm, laser capacity: 4 kW, weight approx.: 7,700 kg, Approx. Onsite Dimension. (l x w x h): 57,545 x 2,630 x 2,789 mm

Description: Serial number: 20510020 Working hours according to the counter: 4139 Working table: 3050x1526 mm , CNC Control LC20 Travels: , X-axis: 3050 mm Y-axis: 1526 mm Cutting capacity: , Normal steel ST 44: 20 mm Stainless steel (1.4301) with N2: 12 mm Aluminium 5052: 10 mm Cutting speed: 0-30 m/min Traverse speed: , X-axis: 85 m/min , Y-axis: 85 m/min Z-axis: 60m/min Installed power: 71 kva Installed chiller power: 25kva Automatic pallet changeover: , Max. sheet size: 3000x1500 mm , Max. plate weight: 730 kg Standard pallet changeover No. of pallets 2 (2007) Pallet changeover time 15sec Resonator: , Model 40CFX , Max. continuous power: hp 4000watt Peak Power: 5000watt Polishing Frequency: 5-3000 hz The machine was working till february 2024,  ,was dismantled by AMADA and now is stored laser capacity: 4 k ...

Description:  , , ,Serial Number: 32510005 Technical Data Laser: Co2 laser Control: FANUC AF2000C Power: 2kw Technical data Punching machine: Working dimensions:  , 1500 x 2500 mm without repositioning , 1500 x 5000 mm with 1 repositioning. Force: 196 KN Power: 53kva Max. material weight: 280 kg Max. material thickness: , 6,4 ,mm Tool stations: 31 (tooling not included) Max. tool diameter: 88,9 mm Tool change time: 1,5 sec. Automatization ,system Included  , Serial Number: 835 Model: PR UL 300  , ,AP , YOM: 2004 Capacity: 3000kg Power: 5,5kw Stacking Area. 3 400 x 1 400 mm CE standard Note: Machine was dismantled by AMADA and now , is stored laser capacity: 2 kW, control: FANUC AF2000C, total power requirement: 53 kW, weight approx.: 20,000 kg, Approx. Onsite Dimension. (l x w x h): 8,320 x 4,203 x 2,773 ...

Blade length 205 mm Max cutting performance Sheet R = 42 kg / mm2 4 mm Sheet R = 70 kg / mm2 3 mm Engine power 3 kW Number of beats / minutes 50 min Table dimension 625 x 954 mm Capacity of the oil tank 25 l Weight 500 kg The setting between the blades is fully automatic. Standard: - 1 set of knives at 30 ° (mounted on the machine) - 1 stop switch - 1 general circuit breaker - 1 stop adjustable and adjustable every 15° - Fill the first oil - Manual with installation and maintenance instructions and service keys.

3000 x 1500mm 4000w

Used machine in good condition. Available for immediate delivery. - Operating hours: 36.500 - Pressure force: 130 t - Bending length: 3.000 mm - Working area: 3.110 mm - Axes: 7 - Distance between uprights: 2.700 mm - Working speed: 1-10 mm/seg - Throat: 420 mm - Control: Operateur II - Stroke max: 200 mm - Power: installed max: 7,5 kW - Dimensions (long x wide x high): 4.340 ? 2.000 ? 2.415 mm - Weight: 4.700 kg

- Updated CNC ? Task 84 Titano plus, year 2016 - Pneumatic tie downs - Open Height: 0 mm - Hole: 0 mm - Backgauge movement: 0 mm - Table width L -R: 0 mm - Inclination of beam: 0 mm - Operating hours: 0 - Type: 0 - Pressure force: 100 t - Bending length: 3.100 mm - Axes: 7 - Working area: 0 mm - Distance between uprights: 0 mm - Returning speed: 0 mm/seg - Frame type: 0 - Working speed: 0 mm/seg - Locking speed: 0 mm/seg - Throat: 0 mm - Control: CNC TASJ 84 Titano plus 2016 - Stroke max: 0 mm - Oil tank capacity: 0 l - Power: installed max: 0 kW - Weight: 6.750 kg - Dimensions (long x wide x high): 3.750 ? 1.960 ? 2.650 mm

LKI300 loading / unloading system - Control type: FANUC 04PC - Number of turret stations (pcs): 45 - Number of index tool stations, max: 4 - Punching force: 300 kN - Working area max: 2.500 (5.000) x 1.250 mm - Material thickness (punching) max: 6 mm - Dimensions (long x wide x high): 4.673 x 4.120 x 2.450 mm - Weight: 13.500 kg

Capacity: 0 t Operating hours: 32165 Technical data Pressure: 25 to Max. Bending length: 1250 mm Passage between press bars: 320 mm Distance between the: 1020 Max. stroke: 100 mm Depth of throat: 200 mm Feed rate: 75 mm/s Working speed: 10 mm/s Return stroke speed: 80 m/min Table length: 1200 mm Table width: 60 mm Table height: 865 mm Number of spacers: 6 pce Height of the spacers: 120 mm Number of cylinder: 1 pce Oil capacity: 30 l Voltage 50 Hz 3x: 400 Volt Motor power: 4 kW Machine´s weight about: 1600 kg Overall dimensions machine: Length: 1800 mm Width: 1200 mm Height: 2000 mm

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Technical data Cut range: round up to: 250 mm Band length: 3505 mm Band width: 25 mm Sheet thickness: 0.95 mm Voltage 50 Hz 3x: 380 Volt Power: 2.2 kW Machine´s weight about: 800 kg Overall dimensions machine: Length: 2000 mm Width: 1900 mm Height: 1400 mm

Press force: 130T Stroke: 350 mm 4 axis Weight:8860 kg

Capacity: 80 t Folding length: 2505 mm CNC Brand: _Unknown / Other CNC Model: Operateur 8 Axis SPECIFICATIONS Controll    Operateur 8 Axis Pressbrake / Folding / Mech. / Hydr.   Pressbrake    Hydraulic / Mechanical   Hydraulic Bending length   2505 mm Distance between column  2050 mm Press force   80 Ton Throat  400 mm Stroke100 mm Die height   370 mm Backgauge stroke X in mm    600 mm Number off controlled axis   8 Power  7.5 kW  

Capacity: 100 t Folding length: 3100 mm CNC Brand: _Unknown / Other CNC Model: Operateur 2 SPECIFICATIONS Controll  Operateur 2 Pressbrake / Folding / Mech. / Hydr.  Pressbrake Hydraulic / Mechanical   Hydraulic Bending length    3100 mm Distance between column   2550 mm Press force   100 Ton Throat  400 mm Stroke  100 mm Die height  370 mm Backgauge stroke X in mm  0 - 600 mm Power  9 kW