128,876 used machines on RESALE, but how to find them? Machine Search
1015 KW Dresser counterpressure steam turbine for sale. 35.000 € plus VAT FCA freely charged in D-Bergisch Gladbach. TUBRINE Brand: DRESSER-RAND (Nadrowski) Type: AVT 72 TW 17 Number: 16225-1 Electr. Power: 1015 KW Rated power: 1375 kVA Year of construction: 1995 (control units upgraded in 2008) Voltage: 400 V RPM: 1500 rpm Steam flow rate: 25 tons /h Dimensions (l x w x h): 4.50 x 2.40 x 2.30 m Inlet temperature: 253°C Inlet pressure : 18 bar Exhaust temperature : 152°C Outlet pressure : 5.0 bar Steam flow rate at the entrance: 25 tons/h Turbine weight: 11,000 kg Generator Brand: Leroy Somer Type: NWR 50 BL10-4P Electrical power : 1015 KW SWITCHBOARD Manufactured by TIL SA and updated in 2008 Schneider control
Dresser-Rand steam turbine (new price 2.8 million EUR), unused and as good as new - built 2009 - inlet steam stream 53,000 kg/h - 1 generator type Syn. 3 phases - 60 Hz, 12.3 MW - 4,500 rqm / 1,800 rqm - gearbox RENK type TL-500, BJ. 2009, GEA surface capacitor, type 2/III/H, BJ 2007, 2 condensate pumps type Etanorm G080-400 G11, BJ 2007
3692 KW Dresser Tuthill Nadrowski Tandem Condensation Turbine (steam turbine)for sale. 58.000 € plus VAT FCA freely charged in D-Bergisch Gladbach. Scope of supply: Steam turbo set and generator (6 KV). On request, generators with 10 to 11 KV are also available. A suitable capacitor costs 75,000 € extra. Not included: Control. Brand: Leroy-Somer Manufacturer: Tuthill Nadrowski Turbinen GmbH Type: LSA 56 BS 5- 4P Serial No.: 168233-1 Year of construction: 12-2001 Electr. Power: 3692 KW Power: 4625 KVA Voltage: 6000 V rpm: 1500 rpm Size (L x W x H): 3.10 m x 1.80 m x 2.70 m Weight: 10,000 kg Total output HD and ND turbine: 3692 KW. Total weight steam turbo set: 15 tons + 10 tons generator.
3X Identical Steam Turbine sets Each steam turbine set is a complete system except the boiler for the steam generation. If sufficient water vapour is already available from another source, this can also be used. In this case, a boiler is no longer required. The three sets have never been run (like new), however, this sets are already more than 10 years old (year of production 2009). The project for which this sets were purchased has never been implemented. The steam turbine sets are running on 60 Hz. Depending on the country, where the steam turbine sets should be used, they may have to be converted to 50 Hz (replacing the gearbox and the clutch of the generator). This is possible and can be done by experienced companies. We can recommend a German company that has extensive experience in the errection and maintenance of this type of steam turbine. The unused steam turbine sets are pa ...
Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, accessories -Execution: -interlocking in a stair-like pattern -for use in pairs -individual documents can be used in conjunction with clamping iron no. 372000 -Support height: 30 to 200 mm -Heated steel: painted -Weight: 6 kg
All items are sold on condition `as is and where is`. Ex work from current location excluding de-installation, de-hook up, discharge, packaging, crating and delivery. We are not responsible for any damage incurred during shipment.
Clamping devices, clamping jaws, deep clamping jaws, clamping supports, clamping tools, step clamps, low clamps, clamping irons, accessories -Execution: -interlocking in a stair-like pattern -for use in pairs -individual documents can be used in conjunction with clamping iron no. 372000 -Support height: 22 to 208 mm. -Material: -Heated steel: painted. -Scope of delivery: -includes 2x wooden boxes -Weight: 12 kg
Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Smugglers/smugglers conveyor technology Model: Round belt Condition: Used Year of construction: 2013 Manufacturer: AMI Fördertechnik Total width outside: approx. 1790 mm Total width inside: approx. 2300 mm Conveying width incl. motor: approx. 800 mm Conveying width without motor: approx. 710 mm Roller spacing/ axle spacing: 120/65 mm Frame height: approx. 125 mm Frame width: approx. 35 mm Colour: Light grey Including SEW motor (037 KW) Includes side guide Feet to be ordered separately. In stock: 1 Price per piece The conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made soluti ...
Technical Specifications & Performance Data The Robino & Galandrino Fenix 2 is a dedicated capsuling machine engineered for precise capsule application on bottles within a used bottling line context. Built with industrial packaging reliability in mind, this unit integrates smoothly into beverage production environments and second hand bottling equipment upgrades. Manufactured by Robino & Galandrino, it leverages the brandâs engineering for consistent, repeatable results in capsule application. Manufacturer: Robino & Galandrino Model: Fenix 2 Year: 2014 Machine category: Capsuling machine Schema/code: FEX750 Electrical supply: 400 V, 3-phase Frequency: 50 Hz Nominal current: 6.5 A Typical application: Capsule application on bottles in beverage production lines Advanced Automation & Control Systems The Fenix 2 supports straightforward integration with modern line controls. Its 400 V 3 ...
Self-propelled Multifunctional Amphibious dredging/digging equipment Multifunctional Amphibious PRIENAI is new SAND PUMS and floating pipelines These dredging/digging equipment can also be dismantled into separate sections and transportet by land. The equipment can work both on land and in water. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIPMENT 1. Self-propelled Multifunctional Amphibious dredging/digging equipment: 2.1. Self-propelled Multifunctional Amphibious 1 2.2. Self-propelled Multifunctional Amphibious 2 2. Additional equipment for Multifunctional Amphibious dredging/digging equipment: 2.1. Sand pump 2.2. Bucket 2.3. Grab 2.4. The self-floating hose Equipment Date of Built – 2021/2022 Certificated By RINA. 1. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIPMENT Basic descriptions: Overall Length – 12,9 m. Moulded Breadt ...
Self-propelled Multifunctional Amphibious dredging/digging equipment Multifunctional Amphibious ALYTUS was operated for up to 400 hours – (Registered in the Lithuanian register) SAND PUMS and floating pipelines These dredging/digging equipment can also be dismantled into separate sections and transportet by land. The equipment can work both on land and in water. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIPMENT 1. Self-propelled Multifunctional Amphibious dredging/digging equipment: 2.1. Self-propelled Multifunctional Amphibious 1 2.2. Self-propelled Multifunctional Amphibious 2 2. Additional equipment for Multifunctional Amphibious dredging/digging equipment: 2.1. Sand pump 2.2. Bucket 2.3. Grab 2.4. The self-floating hose Equipment Date of Built – 2021/2022 Certificated By RINA. 1. SELF-PROPELLED MULTIFUNCTIONAL AMPHIBIOUS DREDGING/DIGGING EQUIP ...
Tribloc America 9/8/1 KK Rinser, Filler and closer Cimec America 9/8/1 with 9 rinsing stations, 8 filling valves and 1head crown corker capacity: approx. 1.300 bph bottle sizes: 0,33 and 0,5 ltr. bottles closure: 28 mm crown cork with double pre-evacuation with CIP tulps with siemens S7 PLC length: 3.300 mm with control panel width: 1.600 mm height: 2.600 mm
used
R22104/17 AMC Label Punch Model: NC 110 LCD Built: 1998 Availability: instantly Punching surface 750 x 1100 mm Punch size: max. 280 x 280 mm Min. 10 x 10 mm max. punching pressure 10,000 kg Stacking height 0-25 mm Available: immediately
<br>Tube length: 55-132 (165) cm Pipe width: 30-70 (80) cm 4 plies, photocell, 2 rear color printers<br><br><br>Verf Gbar: at once
Amonyak compressor Stal-Astra,screw with ekonomisor,switch box Venig used,only cca.6.000 operating hours.150Kw cooling capacity.
2 pcs. Siemens 800 ampere 1 pc. Merlin Gerin 2000 Ampere As good as new !
Heating with hot water and heat exchanger. Air filter and Verteilkänäle. Type I engine number 918005 0720.25.20
Kahl Mixer Continuous Mixer Conditioner for Pellet Press Gr.3 used Manufacturer: Amandus Kahl Model: Gr.3 / Gr. III with drive motor ABB motors 380/660 V; 1470 rpm; 30 kW. For continuous conditioning, mixing of bulk materials with fissics as dosing for pellet presses . Use: - For continuous mixing of feed with liquids and steam - For melasses dry chips - In general process technology for moisturizing granular / powdery substances - General: for (all) mixing tasks in which liquids must be entered into solids Tech. Information Manufacturers - Total length approx. 2964 mm - Diameter approx. 550 mm - Total height approx. 900 mm - Distance inlet/outlet (center/middle) approx. 1950 mm - Inlet/output approx. 300x300 mm - Weight approx. 800 kg + motor approx. 245 kg Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.
For Amos press 1600 3 Steück new mesh belts type 5060 22600 Mm Width 1600 mm Chain and closure polyester unit price 2250,-
Tube length: 55 - 132 (165)cm Tube widht: 30 - 70 (80) cm 4 plies, photo cell, 2 colour tail end printer Available: at once
The turret press AMADA EUROPE 245 was produced in 2000 (machine installation: 2001). The price of the machine includes: installation and training in the use of the machine Punching machine technical data: - CNC control: FANUC 18 i-P - working time: 35,000 h - pressure: 20 t - work table: X = 600, Y = 400 - maximum punching format without intercept and with 31 stations head: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - maximum size of a punched sheet with an intercept: 1020 x 2540 mm - maximum size of the sheet to be punched with the intercept + 1 revolution (optional): 1500 x 2540 mm - maximum sheet thickness on the ball table: 6 mm - maximum sheet thickness on the brush table: 3 mm - maximum allowable weight on the table: 100 kg - punching accuracy: + -0.1 mm - positioning accuracy: + -0.07 mm - number of pneumatic clamps / grips: 2 - number of axes controlled s ...
Technical data: Roll width: 800mm Roll diameter: 152mm Length: 9700mm Roll spacing: 800mm Power: 2.2 KW Accessories: Abort ingenurole (right) Lifting and sinks counter-rotating thread roller for max. wood length 7.0m, threaded roller is located 2.5 m before the roller aisle end
Vacuum filling and closing monobloc Cobert 32/8 for 38mm widemouth PET bottles Type: Ambra with 32 filling valves and 8 head Arol plastic screw capping machine (incl. pick and place system) Tempreature filling: 85° C degrees hotfill Running direction: right to left Neck size: 38mm widemouth year of manufacturing: 1994 capacity: approx. 6.000bph based on 1.0 ltr. PET-bottles incl. saftey housing around the machine
AMOB MAH 60/3 Section: 20 cm ³ Power: 5.5 kW - 7 hp Rpm: 11 rpm Ø instrument: 170/108 mm Ø shaft: 55/55 mm Weight: 600 kg Dimensions: 1300x890x1550 mm Nr. 3 motorized rollers hydraulic adjustment top roller Side guide rollers Programmable and displayed top roller Horizontal and vertical working position Pedal with safety device start/stop General information: The AMOB MAH series top roll profile hydraulic bending machines are the backbone of the widest selection of profile curves in the world. The MAH series is perfect for those applications that require multiple passes, where repeatability is paramount. Motorized 3-roller machines are suitable for narrower spokes and minimize material marking. Both horizontal and vertical working positions ensure that, even in the smallest workspaces, a mah series profiling machine will be placed. T ...
4 plies, micro perforating units, web guide system, 2 colour tail end printer, photo cell for preprinted paper, tube packeting station
Additional options New/unused EPA marked Yes Engine Mitsubishi S12R-PTA 1425 kVA generator power Generator Mecc Alte ECO43-2LN/ CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 13,170 kg Dimensions (Lxwxh) 750x230x250 m Country of production Netherlands Additional Tank, Battery, Control Panel Other information
Digital charging grate 24Volt 140 Ampere! Very strong charging for large batteries! Charging for forklift battery suitable for 12 cells 24 Volt 140 Ampere good condition More used loaders 24Volt, 48Volt, 80 Volt from 55 amperes to 200 amperes at the camp, please ask. Special price
used
The AMTEC VERTIwrap is a sorting module weight tester. Width 220 mm, weight range 5-999 g e = 1, 5 g. The machine is available and can be viewed like in Meersburg, Baden-Württemberg.
Wood pelletizing plant, KAHL pellet press used the complex includes: Pellet press AMANDUS KAHL Matrice diameter approx. 1000 mm Pallet diameter approx. Ø 8 mm 5 Koller approx. Ø 340 x 130 mm Motor power 160 kW an auxiliary motor is damaged, but can be replaced by us Dimensions approx. 1600 x 1800 x 3000 mm + motor Weight approx. 8000 kg Conditioner / Dosing and Mixing Screw Diameter approx. Ø 400 mm 5.5 kW Dimensions approx. 3100 x 900 x 800 mm Single shaft paddle mixer Dimensions approx. 3300 x 1600 x 2000 mm + gear motor Pellet coolers Dimensions approx. 2300 x 2300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.
Additional options New/unused EPA marked Yes Engine Mitsubishi S16R-PTA2 2100 kVA generator power Generator Mecc Alte ECO46-1 l/4 CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 20,100 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel Other information Available with soundproof canopy as well.
Additional options New/unused EPA marked Yes Engine Mitsubishi S16R-PTAA 2250 kVA generator power Generator Mecc Alte ECO46-1 l/4 CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 21,100 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel
Mower containers and mulchers Working width 1.50 m, 3-point attachment cat. I/II, for PTO 540 rpm. Capacity approx. 2500 ltr. Equipment: Height-adjustable front wheels, support roller, height-adjustable rear landing gear. (3 hydraulic connections required (dw/ew). Lighting system according to StVZO. For mowing and/or scarifying (scarifying knife optional required) of grassy areas. The mown material - including horse droppings and leaves - can be picked up and then transported away at the same time. Required tractor power: 26 kw / 35 hp. High stability during the tipping process and problem-free road transport due to rear landing gear. Emptying height max. approx. 2.20 m (factory specifications). Age-related wear and tear and paint defects/rust present, but still operational. Alternatively, we also offer Reiser mowing containers with a working width of 1.30 or 1.50 m as well as a W ...
Additional options New/unused EPA marked Yes Engine Mitsubishi S16R2PTAW Generator power 2500 kVA Generator Mecc Alte ECO46-1.5 L CE marked Yes Frequency 50 Hertz Voltage 400 V 2000 l tank capacity Total weight GVW 21,300 kg Dimensions (Lxwxh) 900x280x348 m Country of production Netherlands Additional Tank, Battery, Control Panel
Bread slicer, Rösen & Robbert
Bread slicer, Rösen & Robbert
6-Achsenmessgelenkarmsystem Manufacturer: Zett-mess Type of machine: AMPG - 36 p Year of construction: 2003 2 same facilities are available. The price is for a plant. All information without guarantee
Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Roller conveyor curve 90° Model: Round belt Condition: Used Year of construction: 2013 Manufacturer: AMI Fördertechnik Total width outside: approx. 2100 mm Total width inside: approx. 1130 mm Conveying width incl. motor: approx. 700 mm Conveying width without motor: approx. 600 mm Roller spacing/ axle spacing: approx. 80/130 mm Steel frame Frame height: approx. 125 mm Frame width: approx. 35 mm Colour: Light grey Including SEW motor (0.37 KW) Includes side guide Feet to be ordered separately In stock: 4 pieces Price per piece The conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tai ...
maximum number of results exceeded
please refine your search
.JPG)
