137,646 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
Warneke aluminum tipping body, two axles with steering axle, - Year of construction: 1990, - Support load: 10 t, - Wheelbase: 220cm, - Dead weight: 10.6 t, - Maximum permissible total weight: 30 t
Mounting plate, plate field, aluminum plate -Mounting plate: made of aluminum, with threaded holes -Sheet thickness: 25 mm -Threaded holes: M12, spacing 100 mm -Dimensions: see photo technical drawing -Overall dimensions: 1290/800/H120 mm -Weight: 65 kg
Hinge, door hinge, folding hinge, steel hinge, side panel hinge, aluminum hinge, plug hinge, flag hinge -Hinge: Aluminum hinge, plug-in hinge -Type: 2-piece, height 80 mm, see photos -Item No.: 10002174 -Quantity: 128 hinges available -Price: per piece, minimum order quantity 2 pieces. -Dimensions when folded: 80/80/H43 mm -Weight: 0.2 kg/pc.
Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Pipe connection: Ø 190 mm -Cone piece: Ø 465 mm -Material: Aluminum -Transport dimensions: 1100/580/H490 mm -Weight: 13 kg
Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Pipe connection: Ø 190 mm -Cone piece: Ø 465 mm -Material: Aluminum -Transport dimensions: 493/465/H495 mm -Weight: 13 kg
Terminal box, aluminum housing, housing systems, Klippon -Type: AB812027 -Size: 95/83/H35 mm -Price: per piece -Number: 4x available -Weight: 0.3 kg
Tool trolleys, workshop trolleys, mobile workshop trolleys, transport trolleys, table trolleys -Workshop trolley: Transport trolley made of aluminum, with drawer -Length: 1030mm -Width: 610mm -Height: 980mm -Swivel castors: 4 pieces, 2x with brakes -Weight: 24 kg
Hinge, door hinge, folding hinge, angle profile -Angle profile: Material: Aluminum, 45 pieces -Dimensions/recess: see photos / technical drawing -Price/Fee: complete Dimensions: 70/60/H35 mm -Weight: 0.05 kg/pc.
Workbench, clamping plate, ball roller table, ball table, ball roller table -Storage table: Storage plate with ball casters, height-adjustable aluminum frame -Sheet: 1310 x 710 mm -Elevation: 940 - Dimensions: 1310/710/H940 mm -Weight: 43 kg
V-belt pulley, pulley with taper bush, taper clamping bush, taperlock clamping bush -V-belt pulley: 2-groove pulley type 100A Ø 106 mm -V-belt width: 13 mm -Material: aluminum with steel insert, see photos -Mounting: Ø24 x 45 mm -Dimensions: Ø106 x 45 mm -Weight: 0.8 kg
Cargo hold, hatches, cargo hold hatches, trapezoidal sheet metal, hatches, inland waterway vessel hatches -Design: self-supporting -Quantity: 2 pieces still available -Width Quantity: 1 piece 790 mm Overlap 690 mm -Width Quantity: 1 piece 720 mm Overlap 620 mm -Length: 7700 mm -Material: Aluminum Price: per piece -Weight 40 kg/piece
Clamping plate, welding table, straightening plate, T-slot plate -3D welding and work table -in aluminum for stainless steel processing -for positioning and finish welding with T-slot system -Mounting area: 1000x1000 mm -2x pneumatic clamping cylinders with ground connection -Dimensions: 1000/1400/H1300 mm
Platform trolleys, transport trolleys, assembly trolleys -Length: 1600 mm -Depth: 860 mm -Height: 1670 mm
Shelf trolleys, transport trolleys, shelf trolleys, sorting trolleys, order picking trolleys, mobile shelving -Width: 1700 mm -Depth: 760 mm -Height: 1780 mm -Storage shelves: 4 -Price: per piece -Number: 1 pieces -Weight: 84 kg/piece
axial fan, fan, exhaust, fan wheel, fan blades, fan blades -Fan wheel: fan blades for exhaust fans -Diameter: 900mm -Receptacle: Ø 38 mm -Quantity: 9x fan wheel available -Price per piece -Dimensions: Ø 900 x 85 mm -Weight: 16 kg/pc.
V-belt pulley, belt pulley, engine pulley, transmission pulley, triple pulley -V-belt pulley: 3-stage Ø120/92/72 mm -V-belt width: 10 mm -Mounting: Ø 42 mm -Dimensions: Ø120 x 40 mm -Weight: 0.5 kg
V-belt pulley, belt pulley, double-wheel pulley -V-belt pulley: 2-groove pulley type SPZ Ø 125 mm -V-belt width: 10 mm -Hole: Ø28 mm -Dimensions: Ø125 x 55 mm -Weight: 0.6 kg
Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 75 mm -Type: unknown -Hole: Ø 25 mm -26 teeth: belt width 32 mm -Quantity: 4x timing belt pulley available -Price: per piece -Dimensions: Ø 75 x 50 mm -Weight: 0.3 kg/pcs
Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 75 mm -Type: unknown -Hole: Ø 24 mm -26 teeth: belt width 32 mm -Quantity: 5x timing belt pulley available -Price: per piece -Dimensions: Ø 75 x 53 mm -Weight: 0.3 kg/pcs
Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: Clamping aid -Clamping plate -Mouth size: Ø 255 mm -Weight: 20 kg
Additional title: Vertical tank, Capacity: 5244 l, Max. allowable operating pressure: 5 bar, Operating temperature: 20 °C, Width: approx. 1600 mm, Height: approx. 3200 mm, Material: Stainless steel 1.4541, Position: vertical, Base construction: 3 x feet, Features: Manway; safety valve; CIP piping
Refrigeration Dryer – ALUP ADD 36, Manufacturer: ALUP Kompressoren GmbH, Model: ADD 36 (1), Year of manufacture: 2021, Machine type: Refrigerated compressed air dryer, Description, The ALUP ADD 36 is a refrigerated compressed air dryer designed to remove moisture from compressed air systems. The unit ensures dry and clean compressed air, protecting pneumatic equipment and improving the reliability of production systems., This dryer is suitable for industrial applications where consistent air quality is required, including manufacturing, packaging, and processing lines., Technical Specifications, - Manufacturer: ALUP Kompressoren GmbH, - Model: ADD 36 (1), - Year: 2021, - Product number: 4102005889, - Serial number: ITJ560627, - Power supply: 230 V, - Frequency: 50 Hz, - Power consumption: 0.236 kW, - Phase: 1 Ph, Operating Specifications, - Working pressure: 15 bar, - Maximum pressure: ...
Aluminum table, aluminum work table -Material: Aluminum -1x baseboard -2x plastic worktops -Dimensions: 1210/2010/H800 mm -Weight: 70 kg
Aluminum table, aluminum work table -Design: stable -Base floor: 1 -Plastic sheets -filing -Dimensions: 1800/700/H820 mm -Weight: 60 kg
Aluminum table, aluminum work table -made of aluminium -1x ground floor -Border -Feet: adjustable -Dimensions: 2020/900/H960 mm -Weight: 30 kg
Compressor with tank ALUP HL5000-z10/2M 10 bar 276 m3/h Operating hours: 17854 Tank: 2500 l 2 ALUP single compressors HL 3050-Z488 Motor: 2 x 15 kW used, tested ! Dimensions: 3500 x 1200 x 1900 mm
For sale is a robust and reliable industrial refrigeration dryer from the German quality manufacturer ALUP Kompressoren (model Oekodry DT 260). The device effectively removes moisture from the compressed air and thus protects downstream tools and machines. Technical data (according to nameplate): Manufacturer: ALUP-Kompressoren GmbH Model / Type: Oekodry DT 260 Year of Make: 1998 Permissible operating pressure compressed air: max. 16 bar Permissible compressed air temperature: max. 60 °C Operating voltage: 230 V (1 phase / 50 Hz, normal Schuko plug) Nominal consumption: 0.67 kW Refrigerant: R 134a (0.750 kg capacity) Equipment: Integrated automatic steam trap at the bottom of the front Condition & Use: Visually normal workshop condition with usual signs of use. Compact design, is currently ready for transport on pallet.
Removes oil from your compressor condensate, The Alup OWS 18 collects the condensate from a screw compressor, dryer or receiver and separates out the oil. The water that is left can then usually go straight into the drain, so you do not have to have oily condensate taken away., The separator was built in 2021, weighs 6.8 kg empty and is compact enough to sit next to the compressor., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/alup-ows-18-oil-water-separator/, Type: Oil-water separator for compressor condensate, Filtration: Oil filter and activated carbon filter, Weight: 6.8 kg (empty)
used
Qty. 1 Second-hand polishing machine Mfc.: Madar Aluminium Built: 2010 Type: PM 2000 Overhauled: No, but the machine was very rarely used. Operation length: 7000 mm Operation width: 800 mm Profile thickness (workpiece thickness): 10 mm up to 200 mm Polishing drive: 2 x 25 kW including converter (Lenze) Power total: 65 kW Siemens PLC system & touchscreen: PLC -SIEMENS S7200 Touchscreen - SIEMENS TOUCH PANEL TP177MICRO ( 1P 6AV6 640-0CA11-0AX0)
PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM
Alup Compressor SCR 30 - Height: 125cm - Width: 125cm - Depth: 75cm - Weight: 600kg Good condition fully functional can be visited and tried out on site. Shipping abroad. Bilopzitsev Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time at the telephone number below. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.
Air dryer ALUP 16/30 bar 230 V 16 A R 134a Unchecked
Flat pulley, belt pulley, drive pulley, roller pulley -Pulley: flat pulley material cast aluminum Ø 290 mm -Width 200mm -Intake: Ø 60 x 120 mm -Bolt circle: Ø 80 mm M6 -Dimensions: Ø 290 x 200 mm -Weight: 6.3 kg
Food shelf, kitchen shelf, catering shelf -Dimensions: 1060/650/H1760 mm -Shelf spacing: 370 mm -Material: Aluminum -Weight: 42 kg
Air Compressor Screw compressor Manufacturer: Alup Article: SCK 76-08 / SO Volume flow: 9.37 m³/h Motor power: 55.0 KW Completely NEW with all accessories Slight transport damage to the sheet metal, see pictures. Condition : New
Manufacturer: Alup, Type: Allegro 24, Year: 2003, Schraubenkompressor: yes, Operating hours: 39280, Running idle houres: 4909, Verdichtungsenddruck bar 1: 5 - 13, Hauptläuferdrehzahl U/min 1: 2700, Antriebsleistung kW 1: 24, Volumenstrom m³/min 1: 0,76 - 3,91, Year :2003
power capacity: 7,5 kW feed pressure: 10 bar volume capacity: 815 dm³ /min total power requirement: 7,5 kW weight of the machine ca.: 0,4 kg Alup piston compressor - Tank 350 liters - Soundproof housing (68 dB(A) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Two ALUP compressors including two heat exchangers are available. Operating pressure: 7bar, max. pressure: 13bar, max. inlet temperature: 55°C, power range: 11kW-30kW, refrigerant: R513A, refrigerant quantity: 500g, weight: approx. 290kg. Documentation available. An on site inspection is possible.
Clamping plate with pneumatic cylinder, centering table, centering device, plate field, welding table, welding table, plate boring machine -Clamping plate with: 24 pneumatic cylinders -Material: aluminum -Width: 775 mm -Table length: 1600 mm -Height: 180 mm -Dimensions: 1600/775/H180 mm -Weight: 250 kg
Knurling machine, window construction profile machine, insulation joining machine -Manufacturer: Aluro, BTM knurling machine with accessories -Type: Knurling Machine -Function: a single machine, solely for knurling the strand cavity -Drive: 2x Lenze 0.55 kW -Rollers: Ø 125 mm -Travel distance X/Z: 120/155 mm -Accessories: see photos -Dimensions: 1180/700/H1480 mm -Weight: 297 kg
Screw compressor Alup Allegro14 Inverter integrated 15 kW 13 bar 2.26 m3/min Year of Make: 2021 Operating hours: 11.334h
Flow rate m3/min: 12.90 Working pressure max bar: 8 Main motor kW: 75 Weight Kg: 1750 Overhauled: Yes Refrigeration dryer MTA - DE 140 - CE 2009 TECHNICAL DATA: Refrigeration compressed air dryer Refrigerant: R134a Refrigerant filling Kg: 2,350 Maximum pressure bar: 16 Total power KW: 3.60 Weight Kg: 293
Environmental protection. Improved separation. Also separates stable emulsions. Meets the strictest purity requirements. Highly efficient. Equipment in detail Maintenance indicator Easy maintenance Filtration Polypropylene for free oil particles Activated carbon for unstable emulsions Organoton for stable emulsions Efficiency with activated carbon Max. oil content at outlet 10mg/l Efficiency with Organoton Max. oil content at outlet 5mg/l Technical data Max. compressed air output (medium climate) without dryer & filter 6.3 m³/min Max. compressed air output (medium climate) with dryer & filter 3 m³/min Condensation Tube 2 x 1/2" Water drain 2 x 1/2 " Condensate inlet temperature min. / max. 0 / 60 °C Dimensions and weight Length x width x height 390 x 278 x 428 mm Connection Admission 1/2" Connection outlet 1 x Ø 12 Curb weight approx. 5.8. kg ...
Separation system oil, water Separation system for compressors condensate 2 x Automatic water separator 230 V
Flat belt pulley, belt pulley, drive pulley, roller pulley -Pulley: Flat belt pulleys 7 pieces -Width 70 mm -Hole: Ø 18 mm -Dimensions: see photos -Shipping/Price: complete -Dimensions box: 430/210/H115 mm -Weight: 11 kg
Throughput: 5000bottles/h, format parts: 0.75l bottles, an on-site inspection is possible.
Final compression pressure: 10 pe/bar Speed: 745 1/min Volume flow: 3455 dm³/min Motor power: 22 kW
