136,830 used machines on RESALE, but how to find them? Machine Search
Aluminium sawing machine with 2 saw motors that make a 45° cut independently of each other. Material feed unit with up to 8,100 mm Cross conveyor, depositing table, chip conveyor and suction Soundproof booth Control via Siemens S7 panel Instruction manual etc. available, further technical data on request The machine was in operation until it was dismantled Further technical data on request or see photos
6 Pieces Zeppelin Aluminum Outdoor Silos Ø 3,500 approx. 240 cbm capacity Bulk density 1.0 t/m³ Length complete: 28 meters per silo for sale. Price on request Phone 0172 8345457
horizontal aluminium tank with 2 consoles Volume: 15 m³ Dimensions: Ø 1.90 x 5.80 m long
saw blade diameter: 420 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 100 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 130 x 80 mm turning speeds: 3000 U/min engine output: 2,0 kW total power requirement: 2,0 kW weight of the machine ca.: 190 Kg dimensions: 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device - Roller conveyor with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 400 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 130 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: flat: 110 x 125 mm saw blade turning speeds: 3000 U/min total power requirement: 1,75 kW weight of the machine ca.: 140 kg dimensions: 1,0 x 0,65 x 1,5 m Alu miter saw - Miter left/right 45° - pneumatic double clamping device - with mist spray device - with machine base - Roller conveyor 3m with material stop - Machine feet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Aluminium silo with hopper, used for plastic granulates, height 6000 mm, diameter 2400 mm, density 1000 kg/m3, capacity 18.5 m³, full and empty detector
MACC Aluminium Circular Saw TA 400 TCT circular saw blade 400 mm Section cap. up to 140 mm round Coolant pump Attack Speed 3000 rpm Motor 2.2 kW, 400 V incl. machine base Weight approx. 160 kg
2 Aluminum Exterior Silo approx. 30 cbm capacity Bulk density 1.0 t/m³ Ø 2,400 mm Height approx. 9,500 mm Silos stand on frames for sale Price on request Phone 0172 8345457
Max. saw blade diameter: 500 mm Infinitely adjustable hydropneumatic saw blade feed Pneumatic material tensioners Weight: approx. 450 kg
Max. saw blade diameter: 400 mm Pneumatic material tensioner Manual feed
Aluminum circular saw, miter saw, glass strip saw, aluminum miter saw, metal miter saw, compound miter saw -Processing: of flat, angle and solid materials, pipes and special profiles -Saw blade: Ø 350 mm -Drive: 2.3/3 kW -Speed: 1430/2860 rpm -Dimensions: 800/900/H1600 mm -Weight: 260 kg
PREZ-MET PVC and aluminium window production line is a state-of-the-art and comprehensive solution for the mass production of windows. The system enables complete machining of PVC and aluminium profiles within a single working cycle. The production includes all key stages – from precise profile cutting, through milling, drilling, welding to final cleaning of the elements. The PREZ MET window production center is made up of three smaller integrated production lines – one line for the production of window frames and two lines for the production of window sashes. They consist of machines from renowned manufacturers from 2005-2016: – ROTOX ZSA 263 cutting center – PREZ-MET FS 50 end milling machine – PREZ-MET 42 MP copy milling machine – PREZ-MET ZGP 420 four-head welding machine (3 pcs) – PREZ-MET ZGP 380E two-head welding machine (2 pcs) – PREZ-MET ZG 940 single-he ...
Used aluminium tube filling machine made by the Italian company IMA Comadis model 720 A. The Comadis 720 A is an automatic tube filling machine, designed specifically for metal tubes with a maximum diameter of 35 mm. This linear automatic machine is equipped with a crimp-sealing head and a tube orientation system, ensuring precision and efficiency in the filling and sealing processes. The machine features a conical product hopper with a heating/cooling jacket, located at the top of the unit, which facilitates a smooth flow of material. The unit is enclosed in a transparent protective housing, which ensures safety whilst allowing operators to visually monitor the filling process. Access to the interior is provided by transparent doors with handles, facilitating maintenance and cleaning. The control panel is fitted with a range of buttons and a clearly marked red emergency stop button, ...
MIG Aluminum Welding Wire ALCAN MT-AL 4043A ALSi5 3.2245 Diameter: Ø 1.6 mm coil: K300 Quantity: 7 kg New ! Dimensions: 310 x 110 x 320 mm
MIG Aluminum Welding Wire MTC MT-MIGAL 1450 SG/AlMg 99.5 Ti 3.0805 Diameter: Ø 1.6mm Coil: K300 Quantity: 6kg New ! Dimensions: 300 x 110 x 310 mm
MIG Aluminum Welding Wire ALCAN MT-AL 5356 S-ALMg 5 3.3556 Diameter: Ø 1.6 mm coil: K300 Quantity: 7 kg New ! Dimensions: 310 x 110 x 320 mm
MIG Aluminum Welding Wire ALCAN MT-AL 5183 S-ALMg 4.5 Mn 3.3548 Diameter: Ø 1.6 mm coil: Ø 300 mm Quantity: 6.5 kg New ! Dimensions: 310 x 110 x 320 mm
Alu Plug-in Tube FRÄNKISCHE ROHRWERKE ES Type 32 3000 x 32 mm VDE 0605, DIN EN 50086-1, DIN EN 50086-2-1, Classification: 4456 CE 3030512 3 packages of 30 m New !' Dimensions: 3000 x 500 x 100 mm
used
Qty. 1 Second-hand aluminium profile lamination line Mfc.: S.I.M. PACK Srl Model: SIRIO PROFILI TA/200/2S Built: 2011 Stopped: 2026 Voltage: 400 V, 3 ph., 50 Hz The machine applies the protective film simultaneously on 2 flat surfaces of profiles with a max. width 200 mm and height 200 mm and the cut of the film between the profiles is automatic. The machine in made up of a strong electric welded iron tubular frame on which there are: One unit for the dragging of the film on the upper and lower surface composed by a vertical column bearing no. 2 opposed rubbered rollers. No.1 Pulling unit composed by no. 2 rollers position at the exit of the machine. No. 1 Automatic cutting activated by pneumatic cylinder with vertical movement. No. 2 Idle roller table 2.5 m long, with PVC covered rolls and alignmentlocator to get a correct Alignment of the material to be coat with the prot ...
Aluminum Silo Content Granules Height approx. 7,500 mm Ø 3,000 mm Inhlat approx. 35 cbm Bulk density 0.6 t/m³ for sale Phone 0172 8345457
Material: Aluminium, 4 mm thick, Height: 58 cm, Length: 115 cm, Width: 50 cm. Auction-ID: A1-50595-40
Dimensions per piece 4420x460x150mm. Auction-ID: A1-50889-167
4 aluminium silos Ø 2,400 mm Height 17,530 mm Content 70 m³ Bulk density 0.85 t/m³ Vibra floor, sluice discharge, jet filter for sale Phone 0172 8345457
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,27 t dimensions: 1,1 x 0,95 x 1,7 m - Hydropneumatic semi-automatic - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Ball bearing table - pneumatic. Double clamping device - Machine base with fog spray device - Chip extraction socket on the saw blade protective hood The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Assembly line with 4 assembly stationsRoller conveyor made of aluminium system profile and INTERROLL metal rollersVery universally applicable due to modular elements and assembly pallets 400x700 mmRoller conveyor elements made of aluminium system profile MiniTec - like BOSCH REXROTHExperium height: 815 mmComplete length: 13250 mm4 pieces Longitudinal roller conveyor: usable width 405 mm, length 2500 mm, overall width: 510 mm, 16 rollers each3 pieces transverse roller conveyor: usable width 705 mm, length 1000 mm, width: 810 mm, 10 rollers each1 piece transverse roller conveyor: Usable width 705 mm, length 2500 mm, overall width: 810 mm, 30
saw blade diameter: 530 mm capacity 90 degrees: round: 180 mm capacity 90 degrees: square: 170 mm capacity 90 degrees: flat: 380x70 mm capacity 45 degrees: round: 180 mm capacity 45 degrees: square: 150 mm capacity 45 degrees: square: 290x70 mm total power requirement: 2,2 kW weight of the machine ca.: 350 t dimensions: 1,1 x 0,9 x 1,5 m Underfloor aluminum circular saw, hydropneumatic semi-automatic. · Maintenance unit for pneumatic control · Turntable with ball bearings · Suction nozzle for chip extraction system · 2 pneumatic vertical clamps · Rotation range 180° · Movable rear material stop = enlargeable cutting area · Saw blade feed continuously adjustable · Two-hand safety control Horizontal vices (option) · Mist spray device for cooling emulsion · Engine braking · Machine base · The use of our B & S Coolmatic Plus is mandatory for profile cuts necessary . Saw blade ...
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,9 x 1,4 x 1,8 m Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Hydro-pneumatic control of the saw head · Pneumatic double clamping device · Pneumatic vertical clamping device · Electro-pneumatic material feed unit with material hold-down device · Vernier for length adjustment · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Leftover piece length in automatic mode 210 mm MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting ...
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,22 t dimensions: 0,7 x 0,9 x 1,9 m ATTENTION: SPECIAL PRICE! - Miter left/right 45° - head diagonal cuts up to 45° (shifter) - Pneumatic double quick clamping device Vices close when lowering - Ball bearing table - Machine base - Powerful and powerful - High-quality workmanship The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 mm capacity 45 degrees: square: 100 mm capacity 45 degrees: square: 135 x 60 mm saw blade turning speeds: 1700 / 3400 U/min total power requirement: 1,5/2,2 kW weight of the machine ca.: 0,285 t dimensions: 1,2 x 1,4 x 1,4 m Semi-automatic circular saw for sawing solid and aluminum Hollow iron materials and light metal alloys with electro-welded Carbide toothed washer. Machine for miter cuts from 45° right to 45° left. Through the Alignment along the vertical is possible Sawing operations with the head inclined between 0° and 45° to the left. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm Control: total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,1 x 0,95 x 1,7 m New machines SPECIAL PRICE includes: - Starter Kit 2 - Micro-spraying system Ready for demonstration in our showroom Roller conveyors optional Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Pneumatic vertical clamping device · Vice before and after the saw blade for low-burr cuts · Material hold-down roller · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Single feed 530 mm · Section length min. 4 mm max. 9,999 mm For profile cuts, the us ...
Stock number: D857, Material: Aluminium, In stock: Yes, Amount in stock: 1 pc., Item: Table, Size: L 2500 x W 1260 x H 1000 mm, Legs: 4 pcs.
1,400 litre, Stock Number: T2548, Litre: 1400, Material: Aluminum, In stock: Yes, Amount in stock: 1 pc., Item: Silo, Standing: On a transport frame, Top: Flat, closed, Bottom: Conical, Manway: At the top, Ø 450 mm, Dimensions: L 1330 x W 1130 x H 1850 mm
Saw blade diameter: 300 mm Manual material tensioner Minimum quantity spraying device 120 kg
Turning table, 180 rest table, rotary table with aluminium topPositioning table, rotary table, round dividing table 180Assembly table, swivel tableTurntable: 1080 mmOverall height to top edge turntable: 630 mm- Turntable made of 25.5 mm thick aluminium plate with various holes- very stable turntable, can be rotated by hand- 2 pieces index locking positions 180, manually via foot lever for de-latching- stop damper under the turntable for the locking positions- very stable steel substructure- flange plate steel substructure L x W x H = 600 x 600 x 20 mmSpace requirement
Long-cutting saw for cutting aluminium profiles with feed pusher in very good condition Max. cutting length: 700 mm Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Feed length of the material pusher maximum 6,200 mm System is dismantled in our warehouse Further technical data on request
saw blade diameter: 350 x 32 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180 x 70 mm capacity 45 degrees: round: 120 mm links capacity 45 degrees: round: 110 mm rechts capacity 45 degrees: square: 100 mm links capacity 45 degrees: square: 95 mm rechts capacity 45 degrees: flat: 135 x 60 mm dimensions of saw-blade: 350 x 32 turning speeds: 1700 / 3400 U/min capacity 45 degrees: round: 120 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 210 kg dimensions of the machine ca.: 1170 x 860 x 1600 mm Description: manual high-performance circular saw for cuts from 45 ° right to 45 ° left in aluminum and lightweight metal alloys, with 2 speeds Furnishing: - with pneumatic vices - The saw head can be tilted by 45 ° on one side - Heavy cast iron construction - ensures vibration-free operation and maximum precision - The ...
Max. saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 hand control Pneumatic material tensioners Minimum quantity spraying device Table can be rotated on both sides with detent points at 45° Roller conveyor and stops on request
Max. saw blade diameter: 400 mm Pneumatic material tensioner Manual feed
Max. saw blade diameter: 500 mm Cutting area up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2 rpm Unit counter with automatic shutdown when setpoint is reached Infinitely adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material tensioners Spraying device Instruction manual included Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) 1000 kg
maximum number of results exceeded
please refine your search
10 € 
