We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,318 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Screw diameter: 40 mm Shot weight: 263.55 g Max. Injection volume: 251 cmᶠMax. screw stroke: 200 mm Injection ratio: 198 cmᶠ/ sec Closure components: Closing force: 130 t Clearance between columns: No columns Max dimensions of the table plates: 750x700 mm Ejector: hydraulic Closing system: hydraulic Control: CC 100 EBIAS 9.42 Working hours: 73276 Robot: ER-HLI 51 VC EP5
used
Technological line for tire pyrolysis Total capacity: 70m3. Load capacity: 20-30 tons Manufacturer: a company from China, but the line has been adapted to European requirements. Year of production 2020. Tire pyrolysis efficiency from one ton of used tires = 45% by weight of heavy oil + approx. 33% of soot and approx. 10-12% of steel cord. The pyrolysis cycle from loading to loading is about 24 hours to 36 hours. depending on workflow and peripheral devices. If the tires are loaded in bulk, this reactor will fit about 16-18 tons. If they are baled in the press, it will fit about 25-30 tons. The line is assembled and has performed 18 test cycles. But because the business permit was not extended, it has not been working for a year.
new
The cable peeling machine "MASTER 140" is suitable for peeling XLPE cables, underground cables, cables with steel armouring, cables with aluminium and lead armouring, but also for processing PVC and rubber cables. In contrast to other underground cable machines, which usually only have one blade, the "Master 140" cuts with two blades at the same time – this saves you an additional pass if necessary. To push the cable halves apart, expansion wedges can be screwed on. Both blades can be individually adjusted to the desired cutting depth. Due to concave tension rollers, the cables are less compressed at the cut surfaces, cores from (lead) sheathed cables can be removed more easily. Specifications: Working range/cable diameter: 30 mm to 150 mm Pulling speed: max. 12 m/min Motor: 2x 3.0 kW - 400 Volt Dimensions (LxWxH): 1.8 x 1.0 x 1.2 m Weight: approx. 660 kg
used
Key data: 900 kN, 22 mm
warehouse no.: 503415 manufacturer: ENGEL type: VICTORY 80-90 tech controller: CC200 year of construction: 2009 operation hours: 70171 h clamping force: 900 kN size of mould plates h x v: 740 x 680 mm min. mould height: 300 mm max. open daylight: 800 mm opening stroke: 500 mm screw diameter: 22 mm swept volume: 38 ccm injection pressure: 2060 bar measures of machine l x w x h: 4.4m x 1.5m x 2m total weight: 6700KG equipment included screen text german CEE-socket 16A core pulling hydraulically 1x air valve 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A mould heating 4x
used
Key data: 1800 kN, 460 g/PS, 55 mm
ENGEL victory 1050/180 tech Year of construction: 2016 Control type: Engel CC 300 Operating hours: 14200 h Injection unit Screw diameter: 55 mm Injection weight in PS: 460 g Max. displacement: 510 ccm Spec. Spray pressure: 1615 bar Clamping unit Clamping force: 1800 kN Aperture travel: 750 mm Tool installation height min./max. : 500/750 mm Max. plate spacing: 1250 mm Accessories: Euromap 67 Robot Interface Ecodrive Bimetal cylinder Core pull 4 x Tool heater 8 x 2. Servo motor for parallel movement
used
CNC machining center SCM Tech 99 Working area x-y-z: 3000 x 1200 x 200 mm Drilling unit 12 + 6 spindles Sawing unit 0 - 90 degrees rotatable NC Vertical milling unit ISO 30 6.6 kW Additional. Stop working range I = 3780 mm Vacuum pump 100 m³/h Automatic tool changing device TR 7 Control/Control Cabinet PC Control 8.2 TFT-V6A Color Monitor Software XILOG TELE SOLVE - Service Safety device with bumper and protective grille CE version TV work table with cushions Electrospindle renewed in 2023 Machine is NOT ready for operation - control system defective Ex location NET € 5.900,00
used
Schneidmaschine - Guillotine Wohlenberg CUT-Tec 76 Year 2005 - Serial-No. 3901-006 Schnittbreite max. 760mm / Cutting width max. 760mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Ersatzmesser / Spare knives Sehr guter Zustand - in very good Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
ENGEL 50 ton machines. Year 2007, 2010, 2017 each 1 unit
used
Used GANDRA TEC 500 + Bag-in-Box filling machine: 3L/ 5L / 10L / 20L Automatic. For automatic hot or cold bottling of fruit and vegetable juices, wines, etc. Supported packaging: 3 l, 5 l, 10 l, 20 l. The bags are introduced automatically from a belt or manually. Vacuum generation and nitrogen injection after pouring are standard. Equipped with a filled bag counter and a liter counter. Filled bags are collected manually in machines. Producer: Gandra Model: TEC 500+ Year of production: 2017 She recently poured NFC apple juice Capacity: Up to 500 3 liter bags per hour • Power supply 400V/50Hz; 2 kW • Air pressure 6 bar • Installed power – 1.5 kW 2 pcs available
new
Heat pump / chiller air-cooled, Type: Taurus TECH HTAT 040 HE MTA S.p.A. Heat pump / chiller Taurus TECH HTAT 040 HE (reversible) with hydronic kit, storage tank + pump P15 + fairing hydraulics. Heating capacity kW 99.3 Cold water temp. Exit/Entry: 45 / 40°C Flow rate m³/h 17.2 Available pump pressure bar 0.966 Ambient temperature +7 °C Cooling capacity kW 84.5 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 14.4 Available pump pressure bar 1.24 Ambient temperature 32 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 47 Max. current (A) 79 Starting current circuit (A) 263 Protection class: IP54 Dimensions: Length mm 2510, Width mm 1110, Height mm 2270 Weight kg 1113 Connection Rp 2" Serial No.: 2200392018 Year of construction 2022 Condition: Optical 1, Technically ok (Stock ...
used
cutting diameter: 560 mm saw band length: 7.260x54x1,6 mm Control: mit 99 Programmen work height max.: 650 mm Chip coveyor: inkl. power capacity - table: 10 HP sawing motor: 650 kW weight of the machine ca.: 4.800 kg dimensions of the machine ca.: 3.400x2.050x2.380 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Air cooler / process chiller / chiller air-cooled, Type: TAEevo Tech 251 P3-20 MTA S.p.A. TAEevo Tech 251P3-20 are air-cooled compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 350 ltr. and built-in P3 Circulating pump. Cooling capacity kW 50.4 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 8.59 Available pump pressure (bar) 2.61 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 26.99 Max. current (A) 45,79 Starting current circuit (A) 144.38 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 1023 Connection Rp 2 " Price: on request in Euro (plus VAT from Nettetal) – 3 months warranty Serial No.: 2200342104 Year of co ...
used
General SKU430T1363 LocationBarneveld MakeGWK TypeTeco TT 100.24.K301 Mach.No.166205-02-01 Main Features Heating (medium)Electric Capacity24 KW Temp.300 °C Specified Features - Temperature control unit Temperating machinecheck Thermal oil heatercheck Electric heatingcheck Heating capacity24kW Electric capacity26,2kW With cooling35kW Temperature-10/300°C Tank capacity7 Ltr. With pumpcheck Motor2,2kW, 400 Volt, 2655 rpm. With temperature controllercheck With controlcheck Information Year of construction2003 With switchcheck With switchgearcheck(as is) CEcheck Floorspace1,5x0,5m Total height1,65m Weight450kgTemperature control unitsGWKHeat exchangers > Temperature control unitsBrand > GWK What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welco ...
used
General SKU321T833 LocationBarneveld MakeGessellschaft Wärme-Kältetechnik mbH Typeteco wi 150.72.12/09 Mach.No.160468-01-01/2001 Pressure Working pressure4 Bar Main Features Heating (medium)Electric Capacity74 KW Temp.140 °C Specified Features - Temperature control unit MaterialStainless steel Temperating machinecheck Water heatercheck Heating capacity72 kW Electric capacity74 kW With coolingcheck Temperature140 °C With pumpcheck Capacitymax. 12000 Ltr./h Motor2,2 kW Information Year of construction2001 Mounted on wheelscheck Total height1,2 m Floorspace1,2x0,5 m Weight250 kgTemperature control unitsGWKHeat exchangers > Temperature control unitsBrand > GWK What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in B ...
used
General SKU317S551 LocationBarneveld MakeGWK TypeTeco CS 90 Year of constructionunknown Pressure Working pressure3.8 Bar Main Features Capacity9 KW Temp.95 °C Specified Features - Temperature control unit Water heatercheck Electric heatingcheck Heating medium:water Electric capacity9 kW Capacitymax. 60 ltr/min Temperature95 degr. C Information Mounted on wheelscheck With switchcheck Floorspace0,8x0,3 M CEcheck Total height0,6 M Weight50 KgTemperature control unitsGWKHeat exchangers > Temperature control unitsBrand > GWK What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
BIESSE TechnoLogic through-hole drilling machine Drilling on 4 sides
used
Key data: 1800 kN, 460 g/PS, 55 mm
ENGEL victory 1050/180 tech Year of construction: 2016 Control type: Engel CC 300 Operating hours: 14200 h in fully automatic mode Injection unit Screw diameter: 55 mm Injection weight in PS: 460 g Max. displacement: 510 ccm Spec. Spray pressure: 1615 bar Clamping unit Clamping force: 1800 kN Aperture travel: 750 mm Tool installation height min./max. : 500/750 mm Max. plate spacing: 1250 mm Accessories: Euromap 67 Robot Interface Ecodrive Bimetal cylinder Core pull 4 x Tool heater 8 x 2. Servo motor for parallel movement
used
2005 model little used Very clean plastic injection machine Injection molding machine Engel Victory 500/150 Pro Tech Closing force - 150 tons Year: 2005 Column passage: 740 x 680 mold holder shelves Screw diameter: 40 Injection volume - 251 ccm Min/Max mold thickness: 300 Jacks: 1 Euromap: 500/120 Moving floor movement: 507 Min/Max die height - 300/900 mm Machine weight - 9600 kg Opening path - 600 mm Injection pressure - 1302 bar Machine with robot and safety cage Injection size - 231 g Roller dimensions - 750X520 mm Oil tank capacity - 450 liters
used
Bag-in-Box bottler GANDRA TEC 500 + : 3L / 5L / 10L / 20L 2 pcs available. Automatic. For automatic hot or cold bottling of fruit juices, vegetable juices, wines, etc. Supported packages: 3 l, 5 l, 10 l, 20 l. Bag insertion is done automatically from the belt or manually. Vacuum generation and nitrogen introduction after pouring are standard. Equipped with a filled bag counter and a liter counter. Retrieval of filled bags in the machines is done manually. Manufacturer: Gandra Model: TEC 500 + Year of production: 2017 Recently poured NFC apple juice Capacity: up to 500 bags of 3 liters per hour - Power supply 400 V/50Hz; 2 kW - Air pressure - 6 bar - Installed power - 1.5 kW
used
CNC lathe Manufacturer: Hwacheon Type: Hi-Tech 300 Year of construction: 2006 CNC Control: FANUC-Series 18i-TB Turning diameter max.: 380 mm Turning diameter over bed: 600 mm X-axis travel: 280 mm Revolver: 12-speed Dimensions: 3,300 x 1,900 mm Weight: 8,500 kg
used
Manufacturer ENGEL Type VICTORY 330/150 TECH PRO Clamping Force [tons] 150 Manufacturing Year 2003 Screw Size [mm] 30 Number of aggregates 1 Screw Type WS10 The minimum height of the mold [mm] 300.0 weight [kg] 9100 installed power kW 47 length mm 5193 width mm 1700 height mm 2000 occupied area of 8.8 m2 occupied area with a cage 13.6 m² oil filter HC35 - SMX10 oil tank capacity upper 450 hydraulic oil quantity 450 the viscosity is 46 recommended viscosity 46 NAS purity class on July 12, 2012. 6 CE document 49834 hydraulic pump 1 RKP 80 EHV hydraulic pump 2 RKP 45 EHV insert clutch Rotex size 48 Hardness 98 Technical approval DTW-11-18 UDT external battery revision 30/04/2021 UDT internal revision of the battery 05.2023 UDT battery registration number N2328017536 MC49 robot (UTM-750 TW) Diagrams office E v Schematics office H v Machine diagrams E v Ma ...
used
Manufacturer ENGEL Type Victory 500/150 Tech Clamping Force [tons] 150 Manufacturing Year 2005 Screw Size [mm] 40 Number of aggregates 1 Screw Type TW02.1_650 D40 LD20 G1.2 WS8 1180 The minimum height of the mold [mm] 300.0 weight [kg] 9600 installed power kW 39 length mm 5196 width mm 1804 height mm 2333 occupied area 9.4 m2 occupied area with a cage 14.9 m² oil filter HC28 - SM10 oil tank capacity upper 450 hydraulic oil quantity 450 the viscosity is 46 recommended viscosity 46 NAS purity class on July 12, 2012. 5 date of last oil change II.20 CE document 158323 hydraulic pump 1 RKP 80 EHV hydraulic pump 2 RKP 45 EHV insert clutch Rotex size 48 Hardness 98 Technical approval DTW-11-10 MC43 robot (W 721-0303) Diagrams office E v Schematics office H v Machine diagrams E v Machine diagrams H v Control card addresses CPU 1 Analog 4 Thermo 0 Control c ...
used
Closing unit Clamping force [kN] 1500 Dimensions of mounting plates (hxv) [mm] 850 x 750 injection unit Screw diameter [mm] 40 Injection volume [cm3] 251 Injection pressure [bar] 2019 Electric-hydraulic equipment Nominal power of the pump motor [kW] 23 Heater power [kW] 16 Dimensions and weight Net weight with control cabinet [t] 9.60 Dimensions (L x W x H) [m] 5.54 x 1.86 x 2.20
used
Closing unit Clamping force [kN] 2750 Dimensions of mounting plates (hxv) [mm] 970 x 970 Clearance between columns (hxv) [mm] 630 x 630 injection unit Screw diameter [mm] 60 Injection volume [cm3] 763 Injection weight [g] 694 Injection pressure [bar] 2144 Dimensions and weight Net weight with control cabinet [t] 15.5 Dimensions (L x W x H) [m] 7.5 x 2.2 x 2.7 m
used
Clamping/injection matrix Clamping force [kN] 2750 Mounting plate dimensions (hxv) [mm] 970 x 970 Clearance between columns (hxv) [mm] 630 x 630 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 763 Shot weight [g] 694 Injection pressure [bar] 2144 Dimensions and weight (approximately) Net weight with control cabinet [t] 15,5 Dimensions (L x W x H) [m] 7,5 x 2,2 x 2,7 m
used
Engel Victory 500/120 Tech Shot weight: 231 g Closing force: 1,200 kN Screw diameter: 40 mm Injection pressure: 1300 (2020) bar Column spacing: No columns Plate size: 740 x 680 mm Type of control: CC200 German Installed power: 41 kW Working hours: 96,830 h Weight: 7400 kg Dimensions: 5 x 1.7 m A string of cores Robot nest
used
Engel Victory 750/150 Tech Injection weight: 354 g Closing force: 1,500 kN Screw diameter: 50 mm Injection pressure: 1427 (1909) bar Column spacing: No columns The size of the plates: 750 x 850 mm Type of control: CC200 German Installed power: 61 kW Working hours: 98 108 h Weight: 9500 kg Dimensions: 5.7 x 2 m A string of cores Robot nest
used
ULMA Atlanta HI-TECH horizontal flowpack machine Including : - A feeding belt - One Atlanta Flowpack Options: Double roll holder Motorised film unwind Printed film detection cell Conveyor suitable for transporting trays and bare products (peppers) (possibility to add a top side) Used to pack fruits and vegetables. Maximum output: 80 bags / minute The removal will be at the expense of the buyer and the machine will be taken back without any return/guarantee from our side.
used
Schneidmaschine mit Ruettler - Guillotine with Jogger Wohlenberg 137 CUT-TEC Year 2002 - Serial-No. 3834-006 Schnittbreite / Cutting width max. 1370mm Programm - Duisplay / Program - Display Lufttisch - Chromtisch / Light guard - chrome table grosse-Luft-Seitentische / large airbed side tables Lichtschranke / Light guards Ersatzmesser / Spare knives CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 380V - 10A Schuettelautomat Ruettler mit Ausstreichwalze / Automatic Jogger with Press Rollers Baumann BSB 6 L Year 2003 - Serial-No. 211.917 Bogenformat / Sheet Size max. 1050 x 1450mm Lagenhoehe / Ream height max. 160mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test
used
Producer Engel Type Victory 750 / 180 tech Year 2004 Clamping unit Clamping force 180 ton Opening stroke 750 mm Distance between tie bars 960 x830 mm Mould height min. 500 mm Opening width 1250 mm Injection unit Screw diameter 45 mm Injection volume 318 cm³ Shot weight 302 g Injection pressure 1769/2360 bar Measurements and weight Machine weight 13500 kg Robot Producer Wittman Type W743 Year 2009
used
Producer Engel Type Victory 1350/300 Tech Year 2004 Clamping unit Clamping force 300 ton Opening stroke 900 mm Distance between tie bars 1100 x 1000 mm Mould height min. 400 mm Opening width 1300 mm Platen size (h x v) 1100 X 1000 mm Injection unit Screw diameter 55 mm Injection volume 617 cm³ Shot weight 588 g Injection pressure 1760/2180 bar Measurements and weight Machine weight 19400 kg Robot Producer Wittman Type W843 Year 2015
used
MTA TAEevo Tech 121 Air-cooled chiller / chiller /chiller TAEevo Tech 121-P3 Suitable for outdoor installation, integrated buffer tank 250 litres. Built-in P3 circulation pump Cooling capacity approx. 40 kW at water temperatures 7/12°C - outlet / inlet Pump pressure approx. 2.55 bar. Refrigerant R 407C Electrical power consumption 18 kW Max. operating current 32 A Length 2300mm x Depth 800mm x Height 1650mm Weight approx. 650 Kg. Machine is ready for operation. Test run possible in our warehouse. Price on request.
used
Inv. Num. : 7200 Type: VC 80/25 TECH Producer: Engel Created: 2007 Parameters: Clamping force: 25 t Panel dimensions: 470 x 280 mm Clamping force: 250 kN Screw diameter: 22 mm Machine length: 2720 mm Machine width: 1030 mm Machine height: 1760 mm Injection weight: 1800 kg
used
Key data: 2200 kN, 40 mm
Injection moulding machine ENGEL VICTORY VC 650-150 Tech Stock No.: 503440 Manufacturer: ENGEL Type: VC 650-150 Tech Control: CC100 Year of construction: 2005 Hours: 92467 h We are pleased to introduce you to our used ENGEL VICTORY VC 650-150 Tech injection moulding machine. This high-quality machine has a 40mm screw and a clamping force of 1500 kN. Perfect for precision injection molding in a wide range of applications. Please note the increased minimum installation height of 395mm. Technical Data Closing Page Clamping force: 1500 kN Panel size h x v: 750 x 750 mm Min. installation height: 395 mm Plate spacing max.: 995 mm Aperture travel: 600 mm Ejector stroke: 150 mm Ejection force: 61 kN Centering movable plate D: 160 mm Centering fixed plate D: 160 mm Tool weight: 1800 kg Technical Data Spray Side Screw diameter: 40 mm Displacement: 251 ccm Injection ...
used
Key data: 2200 kN, 535 g/PS, 55 mm
Injection moulding machine ENGEL Victory 1050-220 TECH Stock No.: 503439 Manufacturer: ENGEL Type: Victory 1050-220 TECH Control: CC100 Year of construction: 2006 Hours: 92465 h Technical Data Closing Page Clamping force: 2200 kN Plate size h x w: 860 x 830 mm Min. installation height: 300 mm Plate spacing max.: 1045 mm Aperture travel: 755 mm Ejector stroke: 180 mm Ejection force: 80 kN Centering movable plate D: 160 mm Centering fixed plate D: 160 mm Technical Data Spray Side Screw diameter: 55 mm Displacement: 510 cc Spray pressure: 1615 bar Auger length: 20 l/d Auger stroke: 200 mm Screw speed: 230 min Plasticizing Current: 55 g/s PS Outdoor injection flow: 255 g/s hp Number of heating zones: 5 Nozzle travel: 350 mm Dimensions & Weight Machine dimensions LxWxH: 6.2m x 1.7m x 2.2m Total Weight: 12900KG Equipment CEE socket 16A Compact Flash ...
used
Magnetic stirrer with heating function and the ability to set the time after which the process is to stop. For laboratory and other applications. Works great with magnetic dipoles, glass, PTFE and stainless steel containers. Equipment in factory packaging, with manufacturers instructions and software. Power cable included. Temperature probe included. The device can work with or without the probe, as it has a built-in temperature sensor in the heating plate. Included rs-232 dsub9 cable and dsub9 - usb adapter. The device is marked new (other) because it was purchased for software testing. The equipment has been run a maximum of 10 times and connected to a computer to check the correct operation of the software being developed. Digital display of speed and temperature. Additional safety circuit. Cooktop is disconnected by two independent temperature sensors Connecto ...
used
Description: Max. panel width 3200 mm Max. panel length 1200 mm No of Bottom Units 6 No of Top Units 4 Lateral horizontal groups , Automatic waste ejection system TOOLS NOT INCLUDED Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
used
This injection moulding machine, manufactured in 2000 by DEMAG, model Ergo-Tech 350 Concept, comes with handling technical specifications, making it a prime choice for efficient and reliable production. Its design emphasizes durability and ease of use, suitable for a wide range of injection moulding applications. The DEMAG Ergo-Tech 350 Concept machine we have for sale represents an opportunity to enhance your manufacturing capabilities with a proven, quality piece of equipment. For further information, please contact us.
used
This DEMAG Ergo-Tech 110-310H-120V injection moulding machine was manufactured in 2002, offering precision and reliability for various production needs. Its notable for its efficiency and ease of use, designed to streamline manufacturing processes. This DEMAG machine we have for sale represents a solid addition to any production line, enhancing output with its proven performance. Contact us for further details.
used
Key data: 2600 kN
Engel Victory 1050/260 Tech Ecodrive / hybrid machine / operating hours: approx. 24,000 in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 60 mm Spraying weight: approx. 580 g Spray pressure: 1725 bar Dosing volume: 608 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Size of clamping plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 24,000 in automatic mode Total number of operating hours: 29,433 h Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 40 Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Propor ...
used
Key data: 2600 kN
Engel Victory 1050/260 Tech Ecodrive / hybrid machine / operating hours: approx. 26,000 in automatic mode Year of construction: 2015 Injection unit: Screw diameter: 60 mm Spraying weight: approx. 580 g Spray pressure: 1725 bar Dosing volume: 608 ccm Clamping unit: Clamping force: 260 t Tie bar spacing: 0x0 mm Size of clamping plates: 1100x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 300 - Touchscreen Additional equipment: Machine in perfect technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 26,000 in automatic mode Total number of operating hours: 30,323 h Euromap 67 Robot Interface Air valve x 2 Hydraulic core pull x 1 Hot runner control x 40 Injection unit is wear-resistant and resistant to corrosion The clamping unit and injection unit are driven by servo motors Propor ...
used
Key data: 1200 kN
Angel Victory 330/120 Tech / Production line with the robot Angel Viper 12 Year of construction: 2010 Injection unit: Screw diameter: 35 mm Spraying weight: approx. 140 g Spray pressure: 1595 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 120 t Tie bar spacing: 0x0 mm Size of clamping plates: 740x630 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 - Touchscreen Additional equipment: Machine in perfect technical condition, worked in clean production Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Euromap Robot Interface Air valve x 2 Hydraulic core pull x 2 Hot runner control x 9 Injection unit hardened - Bimetal Main motor of the machine - servo motor driven by inverter Proportional valve on the injection unit – precise injection The machine has been regularly serviced by the authorized service Engel Del ...
used
Key data: 1100 kN
Engel Victory 330/110 Tech / production line with the Engel ER-HLI 41 robot and conveyor belt / machine in very good technical condition Year of construction: 2004 Injection unit: Screw diameter: 40 mm Spray weight: 190 g Injection pressure: 1670 bar Dosing volume: 201 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 0x0 mm Size of clamping plates: 790x680 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 100 Additional equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-bar-less machine Hydraulic core pull x 1 Injection unit hardened - Bimetal Machine has been serviced by the authorized service Engel Machine with original protective housing for robot and conveyor belt Metrics: Weight: 7400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.2 kW Total power: 2 ...
used
This DEMAG Ergo-Tech 250-1450 injection moulding machine was manufactured in 1995. It comes equipped with handling capabilities, tailored for intricate and precise manufacturing processes. This machine represents a blend of durability and efficiency, making it a solid addition to any production line looking for versatile moulding solutions. The DEMAG Ergo-Tech 250-1450 we have for sale offers reliability and a robust build, ensuring longevity and consistent performance in demanding environments. For further details on this machine, please contact us.
used
turning diameter: 325 mm turning length: 532 mm control: FANUC 0i-TD swing over bed: 500 mm spindle turning speed range: 3500 U/min bar capacity: 65 mm travel -x axis: 195 mm travel -z axis: 660 mm spindle drive: 15/11 kW rapid travel - longitudinal/face: 30/30 m/min tailstock quill diameter: 80 mm tailstock quill stroke: 100 mm tailstock quill taper MT: 4 total power requirement: 30 kVA weight of the machine ca.: 4,7 t dimensions of the machine ca.: 2875 x 1675 x 1720 mm Very good condition, low working hours ! Machine comes from a factory closure. CNC control FANUC 0i-TD C axis 12-pos turret with powered positions (3,7/2,2 kW, 5000 rpm) Internal cooling at 17 bar Tailstock Collet chuck up to 60 mm diameter 3-jaw chuck, diameter 250 mm 2 driven tool holders for machining the lateral surface 2 driven tool holders for machining the end face The data for this ad was created with ...
used
Description: TELWIN TECHNOMIG 215 Dual synergig welding machine, inverter-driven, for MIG-TIG-MMA welding current intensivity: 150-220 A, weight approx.: 80 kg, Approx. Onsite Dimension. (l x w x h): 1,300 x 500 x 1,300 mm
used
Description: serial number: 59639 Technical specifications: working width: min 205 mm max: 3200 mm working depth: min 100 mm max 1200 mm passage height: min 8 mm max: 60 mm control and program system two section conveyor, with inverter and automatic adjustment by NC regulation of the measurements of the backstops in automatic by NC number. 4 Double manual pression units number. 6 Panel supports number. 2 Horizontal heads, each with number. 1 motor 2.3 HP and 20-spindles chuck unit number. 6 Vertical bottom heads 96 mm width pneumatically operated, number. 2 motors 1.8 hp and number. 2 boring chucks quick positioning of the heads along the beam ('X' axis) by means of rack and pinion and crank for fine adjustment with encoder for position indication quick positioning of each chucks crosswise direction ('Y' axis) by means of a ball screw and crank for fine adjus ...
used
Description: Overview: The ,CNC machining center designed for efficient and accurate drilling, milling, and panel processing tasks. With advanced features and a robust construction, it offers high performance and reliability for various woodworking and panel fabrication applications. Key Features: F 18 Boorgroep (Drilling Group) Inverter voor Boorkop (Inverter for Drilling Head) Unit 5 Assen Prisma 5 Motor KT (5-axis Prisma 5 Motor Unit) R 16 Meelopend Magazijn (R 16 Walking Warehouse) TR 10 Magazijn (TR 10 Warehouse) Automatische Gecentraliseerde Smering (Automatic Centralized Lubrication) Pneumatische Laadhulp voor Panelen TV (Pneumatic Loading Aid for Panels TV) Vacuümpomp 250 m³ (Vacuum Pump 250 m³) Laserpositioneerunit (Laser Positioning Unit) Afvoerband voor Spaanders (Chip Conveyor) Meetsysteem Lengte Gereedschap (Tool Length Measurement System) Axes: Work ...
used
Description: operating hours: approx. 33489 hrs. 3axis robot IMM type: Thermoset IMM serial number: 199583 clamping force: 180 tons production type: reflector screw type: BMC screw diameter: 35 mm barrel capacity: 154 cm3 max. spec. injection pressure: 1595/2177 max. stroke opening: 1050 mm max. mould thickness: 1050 mm min. mould thickness: 300 mm tie bars distance horizontal (mm): without tie bars tie bars distance vertical (mm): without tie bars locating ring size FH: 200 mm locating ring size MH: 200 mm max. ejector stroke: 180 mm max. ejector layout: 205 mm QMC type: manual total installed power: 80 kW  , please also have a look at the PDF document of this machine Approx. Onsite Dimension. (l x w x h): 1,950 x 5,200 x 2,900 mm, weight approx.: 14,200 kg
used
Description: 3axis robot IMM type: Thermoset IMM serial number: 199583 clamping force: 180 Tonnen production type: reflector screw type: BMC screw diameter: 35 mm barrel capacity: 154 cm3 max. spec. injection pressure: 1595/2177 max. stroke opening: 1050 mm max. mould thickness: 1250 mm min. mould thickness: 500 mm tie bars distance horizontal (mm): without tie bars tie bars distance vertical (mm): without tie bars locating ring size FH: 200 mm locating ring size MH: 200 mm max. ejector stroke: 180 mm max. ejector layout: 205 mm QMC type: manual total installed power: 80 kW injection valve missing  , please also have a look at the PDF document of this machine Approx. Onsite Dimension. (l x w x h): 1,950 x 5,200 x 2,900 mm, weight approx.: 14,200 kg