135,897 used machines on RESALE, but how to find them? Machine Search
On behalf of our client, we are requested to offer this Pasta filata cheese line for sale, due to increasing production at the current factory. The whole line is delivered and built up by Sulbana AG Switzerland in 2019 and it is out of production for ± 1 year. The pasta filata cheese line produce products like Mozzarella, Burrata, Kashkaval, Pizza Cheese etc. The capacity of the line is 200 to 800 kg per hour. The line is already dismantled and located in the warehouse of the dairy in Germany, where it can be inspected., The line exist out of the following components:, - Elevator for lifting normcar trolleys of 200 liter with basic ingredients including tipping unit to empty the trolleys inside the feeding bunker. Max load: 350 kg. Manufacturer: Frontmatec Hygiene GmbH, type: Hebe- Und Kippvorrichtung, model: 27000, serial number: P-10259, year: 2019, motor: 0,75 kW - 400 V - 50 Hz., - ...
Used Pasta Filata Plant PRIMA / ALPMA, Type: WCLSE-1000/1 For the production of Pasta Filata cheese with high dry matter, such as pizza cheese, Kashkaval, etc. Composed of: - Filleting machine, type: WCLSE-1000/1 - Climbing auger, type: cochlear conveyor - Cutting device, type: CHT50B003 - Lifting and tilting device FRONTMATEC Hygiene GmbH, type: 27000 for 200 and 300 litre standard trolleys - Capacity: 200 - 800 kg/h Plant out of order. Viewing possible.
Machine: Cut 25 line Manufacturer: Alpma Type: Cut 25 Year of manufacture: 2003 the Alpma Cut 25 line consists of: Alpma CUT 25 cutting machine Boekels piece scale Auto. Discharge for underweight pieces (cut or section) Auto. Discharge for overweight pieces (first cut or cut-off) Belt for 90° rotation of pieces Accumulation belt/intake belt for downstream form fill and seal machine The line was fully functional and had no defects. It was always maintained. the Boekels is installed on the right (after the CUT 25 cutting machine). Flow direction is from left to right. Documentation is available. Knife width 250mm Max. bar length approx. 800mm 120 cycles/min. A checkweighter is also still available if needed The line is dismantled and stored. If you are interested, you are welcome to inspect the line. Find more here - .ucymachines/
We are selling the stock of the soap factory Riesa here In the last picture you will find an overview picture of the production hall with the machine inventory. Here we offer you: 1 wrapping machine/ packing machine for soap Hull number: 6760.217.097 Output: 25 pieces per minute Weight: 950 kg Maximum pressure: 8 bar Feeder: Automatic Infeed Conveyor Loading FREE Truck
pressure: 175 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 160 mm/sec work speed: 10.0 mm/sec return speed: 120 mm/sec work stroke: 265 mm dayligth: 480 mm table height: 900 mm table width: 90.0 mm oil volume: 230 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 10500 kg range L-W-H: 4100 x 2000 x 2820 mm ALPMAC Manufacturer Video: https://www.youtube.com/watch?v=_FxXyPAcxlE https://www.youtube.com/watch?v=YfkX9RwWv_0 ALPMAC Product Video Model B: https://www.youtube.com/watch?v=lmT1tfy43WE --------------------------------------------------------- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: increased installation height increased cylinder stroke increased throat depth -------------------------------------------------------- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAU ...
pressure: 320 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 510 mm ram stroke speed: 140 mm/sec work speed: 8.0 mm/sec return speed: 130 mm/sec work stroke: 310 mm dayligth: 525 mm table height: 900 mm oil volume: 290 ltr. voltage: 400 Volt weight: 16500 kg range L-W-H: 4550 x 2450 x 3200 mm --------------------------------------------------------- CNC C SERIES electro-hydraulic press brake featuring: Increased daylight (open height) Extended cylinder stroke Increased throat depth Long-type full machine cover --------------------------------------------------------- Equipment: - DELEM CNC control, model DA-69T, with touchscreen/graphics 2D and 3D graphical programming via touchscreen Three-dimensional visualization, including a representation of the machine . during simulation and production 24-inch high-resolution TFT color display Compatibility with th ...
pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 150 mm/sec work speed: 10.0 mm/sec return speed: 140 mm/sec work stroke: 265 mm dayligth: 480 mm table height: 900 mm table width: 110 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 15000 kg range L-W-H: 5000 x 2400 x 2850 mm ALPMAC Manufacturer Video: https://www.youtube.com/watch?v=_FxXyPAcxlE https://www.youtube.com/watch?v=YfkX9RwWv_0 ALPMAC Product Video Model B: https://www.youtube.com/watch?v=lmT1tfy43WE --------------------------------------------------------- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: increased installation height increased cylinder stroke increased throat depth -------------------------------------------------------- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAUL ...
pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 510 mm ram stroke speed: 150 mm/sec work speed: 9.0 mm/sec return speed: 140 mm/sec work stroke: 310 mm dayligth: 525 mm table height: 900 mm oil volume: 290 ltr. voltage: 400 Volt weight: 16300 kg range L-W-H: 4550 x 2450 x 2950 mm --------------------------------------------------------- CNC C SERIES electro-hydraulic press brake featuring: Increased daylight opening (installation height) Extended cylinder stroke Increased throat depth Long-type full machine cover --------------------------------------------------------- Equipment: - DELEM CNC control, model DA-66T, with touchscreen/graphics 2D graphical touchscreen programming 3D visualization for simulation and production 17 high-resolution TFT color screen Bending sequence calculation Product programming with true-to-scale visualization U ...
sheet width: 3050 mm plate thickness: 13.0 mm thickness at Niro-steel: 8.0 mm down holder: 16 Stück no. of strokes: 9 - 17 Hub/min cutting angle: 0.5 - 2.5 ° throat: 150 mm table height: 830 mm oil volume: 250 ltr. weight of the machine ca.: 11.000 kg range L-W-H: 4150 x 2100 x 2450 mm ----------------------------------------------------------- Robust electro-hydraulic CNC guillotine shear with swing-beam Includes CYBELEC CNC touch-screen control system Includes CNC electro-hydraulic blade-gap adjustment Includes CNC electro-hydraulic cutting-angle adjustment ----------------------------------------------------------- Equipment: - CNC electro-hydraulic guillotine shear with swing-beam - Includes CYBELEC CNC touch-screen controller, model CybTouch 8 - Selected CNC control functions: Backgauge positioning (X-axis) Blade-gap adjustment Piece counting Cutting-length limitation Mate ...
sheet width: 3050 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm down holder: 16 Stück no. of strokes: 10 - 19 Hub/min cutting angle: 0.5 - 2.0 ° throat: 150 mm table height: 830 mm oil volume: 140 ltr. weight of the machine ca.: 8.000 kg range L-W-H: 4150 x 2100 x 1900 mm ----------------------------------------------------------- Robust electro-hydraulic CNC guillotine shear with swing-beam Includes CYBELEC CNC touch-screen control system Includes CNC electro-hydraulic blade-gap adjustment Includes CNC electro-hydraulic cutting-angle adjustment ----------------------------------------------------------- Equipment: - CNC electro-hydraulic guillotine shear with swing-beam - Includes CYBELEC CNC touch-screen controller, model CybTouch 8 - Selected CNC control functions: Backgauge positioning (X-axis) Blade-gap adjustment Piece counting Cutting-length limitation Mater ...
sheet width: 3050 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm down holder: 16 Stück no. of strokes: 10 - 19 Hub/min cutting angle: 0.5 - 2.0 ° throat: 150 mm table height: 830 mm oil volume: 140 ltr. weight of the machine ca.: 7.800 kg range L-W-H: 4150 x 2100 x 1900 mm ----------------------------------------------------------- Robust electro-hydraulic CNC guillotine shear with swing-beam Includes CYBELEC CNC touch-screen control system Includes CNC electro-hydraulic blade-gap adjustment Includes CNC electro-hydraulic cutting-angle adjustment ----------------------------------------------------------- Equipment: - CNC electro-hydraulic guillotine shear with swing-beam - Includes CYBELEC CNC touch-screen controller, model CybTouch 8 - Selected CNC control functions: Backgauge positioning (X-axis) Blade-gap adjustment Piece counting Cutting-length limitation Mater ...
sheet width: 2050 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm down holder: 10 Stück no. of strokes: 14 - 24 Hub/min cutting angle: 0.5 - 2.0 ° throat: 150 mm table height: 850 mm oil volume: 200 ltr. weight of the machine ca.: 6.500 kg range L-W-H: 2500 x 2250 x 1950 mm ----------------------------------------------------------- Robust electro-hydraulic CNC guillotine shear with swing-beam Includes CYBELEC CNC touch-screen control system Includes CNC electro-hydraulic blade-gap adjustment Includes CNC electro-hydraulic cutting-angle adjustment ----------------------------------------------------------- Equipment: - CNC electro-hydraulic guillotine shear with swing-beam (guided-blade) design - Includes CYBELEC CNC touch-screen controller, model CybTouch 8 - Selected CNC control functions: Backgauge positioning (X-axis) Blade-gap adjustment Piece counting Cutting-le ...
sheet width: 4050 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm down holder: 20 Stück no. of strokes: 10 - 19 Hub/min cutting angle: 0.5 - 2.0 ° throat: 150 mm table height: 830 mm oil volume: 140 ltr. weight of the machine ca.: 12.000 kg range L-W-H: 5150 x 2250 x 2200 mm ----------------------------------------------------------- Robust electro-hydraulic CNC guillotine shear with swing-beam Includes CYBELEC CNC touch-screen control system Includes CNC electro-hydraulic blade-gap adjustment Includes CNC electro-hydraulic cutting-angle adjustment ----------------------------------------------------------- Equipment: - CNC electro-hydraulic guillotine shear with swing-beam (guided-blade) design - Includes CYBELEC CNC touch-screen controller, model CybTouch 8 - Selected CNC control functions: Backgauge positioning (X-axis) Blade-gap adjustment Piece counting Cutting-l ...
