We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,782 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
clamping force: 700 kN injection volume: 103 cm³ screw diameter: 30 mm platen size: 432 x 310 mm closing stroke: 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Arburg Injection Moulding Machine Type Allrounder 250-75 270 D Clamp force 250kN Operating voltage 420 volts, 20 cycles Pump motor 7.5kw Year 1990 Machine weight: 1800kgs
used
clamping force: 500 kN injection volume: -- cm³ screw diameter: 25 mm platen size: 400 x 400 mm Condition: used, Specification: horizontal injection molding machine, - used injection unit: - Screw diameter: 25 mm - shot volume max.: -- cm³ - injection pressure approx.: 1290 bar - heating zones: 4 - Heating power: 4 kW clamping unit: - clamping force: 500 kN - opening stroke max.: 325 mm - platen distance max.: 550 mm - clamping platen size approx.: 400 x 400 mm - tie bar distance: 270 x 270 mm - pump motor: 15 kW - total power: 19 kW - operating voltage: 380V, 50Hz - Weight approx.: 1.870 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Graco Alligator Drum Stirrer, Agitator pneumatic Very good ready-to-use condition, directly from production!
used
Bread slicer, Wabäma
used
Bread slicer, Fabr. Herlitzius
used
Bread slicer, Fabr. Herlitzius
used
ARBURG ALLROUNDER 221 K5 350-100 (2002) Injection molding machine Closing force: 350kN Opening stroke: 200 mm. Mold mounting height: 150-300 mm. Distance between columns: 350-500 mm. Mold clamping plates: 221 mm. Mold diameter: 342 x 250 mm. Weight of the mit. Mobile of the mold: 75 kg. Ejector force: 24 kN Ejector stroke: 60 mm. Pump motor: 7.5 kW Dry running time: 14.1s Screw diameter: 25 mm. Screw length L/D: 20 mm. Screw stroke: 100mm. Injection volume: 49 cm3 Injected part weight: 41 g/PS Injection pressure: 2000 bar. Injection flow: 54 cm3/s Spindle tangential speed: 29 m/min. Spindle torque: 300 Nozzle support force: 50 kN Nozzle separation stroke: 180 mm. Nozzle cylinder heating: 1600 +3 x 900 kW Oil tank: 50 l. Voltage: 50Hz Heating: 4.6 kW Total connection: 12.1 kW Weight: 1260kg.
used
Injection moulding machine ARBURG Allrounder 420 A 1000-400 Warehouse No.: 503130 Manufacturer: ARBURG Type: Allrounder 420 A 1000-400 Control: Selogica Year of construction: 2005 Operating hours: 31000 h Technical data Close page Clamping force: 1000 kN Holmass v: 420 mm Holmass h: 420 mm Plate size h: 570 mm Plate size v: 570 mm Installation height min.: 250 mm Installation height max.: 500 mm Plate height max.: 850 mm Opening distance: 350 mm Ejector stroke: 150 mm Ejector force: 40 kN Centering movable plate D: 125 mm Centering fixed plate D: 125 mm Technical data spray side Screw diameter: 35 mm Displacement: 154 cc Spray pressure: 2500 bar Screw length: 23 l/d Screw stroke: 160 mm Screw speed: 47 min Screw torque: 560 N Injection flow to the outside: 192 g/s hp Number of heating zones: 4 Nozzle travel: 300 mm Dimensions & Weight Machine dim ...
used
Key data: 2000
warehouse no.: 503128 manufacturer: ARBURG type: Allrounder 520 C 2000-800 controller: Selogica year of construction: 2005 clamping force: 2000 kN distance between tie bars h x v: 520 x 520 mm size of mould plates h x v: 728 x 728 mm min. mould height: 250 mm max. open daylight: 900 mm opening stroke: 650 mm screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar equipment included: screen text german core pulling hydraulically 1x core pulling pneum. 1x air valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for handling mould heating 12x measures of machine lxbxh: 5.45m x 1.8m x 2.1m total weight: 7150KG
used
Format range: 550 mm min. 58 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic upper glue HHS Xtend, 8 channel with 3 application heads with code reading device, Disc glue control, nozzle glue control, linear ejector, Disc glue on the left, feeder with vibrator & blow nozzles, Feeder with own drive, cutting orientation on the left, Pre-crusher right and left, kicker, counter, folding floor module, Transfer station with own drive, Siemens control panel, Radio remote control, extended, pneumatic press belt, cleaned, tested.
used
Item condition: maintained Availability: from now on Delivery: possible
used
Arburg 520C 1500 800 injection molding machine year 2005 Can be seen upstream
used
thermoset BMC, included in the sale 2 pcs Tool-Temp tempering device - water, 1 pc Wittmann W711-0507 robot, Duroplat D45 unit (dry sets), 2 pcs Regloplas tempering device,
used
Arburg Allrounder 420C 800 250 Injection molding machine Arburg Allrounder 420C 800 250 injection molding machine Year 2004
used
Machine comes with robot Power : 50 Ton Distance between columns: 320x320 Screw diameter: 30 Calculated injection volume: 70 Min / Max mold thickness: 200 Euromap: 500-100 Moving platen stroke: 350 Working hours: 78.000
used
Brand: Arburg Model: 370 M 800-225 Tonnage: 80 Year: 1993 Column passage: 370x370 Screw diameter: 40 Calculated injection volume: 188 Min / max mold thickness: 250 Robot interface: Euromap 800-225
used
Injection Moulding Machine Manufacturer Arburg Allrounder Model 630 S 2500-800 Year 2014 Working hour: 70000 ( March 2023)
used
Stock No.: 503129 Manufacturer: ARBURG Type: Allrounder 370 C 800-350 Control: Selogica Year of construction: 2002 Operating hours: 65000 h Technical data closing page Clamping force: 800 kN Holmass v: 370 mm Holmass h: 370 mm Panel size h: 570 mm Panel size v: 570 mm Installation height min.: 250 mm Plate pitch max.: 750 mm Opening distance: 500 mm Ejector stroke: 175 mm Ejector force: 40 kN Centering movable plate D: 125 mm Centering fixed plate D: 125 mm Technical data spray side Screw diameter: 35 mm Displacement: 139 cc Spray pressure: 2500 bar Screw length: 23 l/d Screw stroke: 150 mm Screw speed: 57 min Screw torque: 560 N Number of heating zones: 4 Nozzle travel: 300 mm Dimensions & Weight Machine dimensions LxWxH: 4.24m x 2.45m x 2.1m Total weight: 3460KG Equipment On-screen text german Compact Flash Drive Core pull hydraulic 2x Air ...
used
ARBURG 270 S 150-60 U ALLROUNDER MACHINE WAS FULLY SERVICED NOT LONG AGO WITH NEW SCREW TECNICAL DATA IN LIST -PHOTO EUROMAP 150-60
used
Machine Type: Screw Air Compressor Manufacturer: Alup Type: Allegro 30/SO Year of construction: 2002 Condition: used / good Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-ALU-1123-1 DESCRIPTION We offer you a used screw compressor from the manufacturer Alup. Specifications Flow rate 0.73-6.05 sqm/min Motor speed 1000-6000 Max. pressure 5-13bar Motor power 30KW Approximately 112,000 hours/device has always been serviced. Last maintenance 03/2023 Availability: from January 2024 Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions an ...
used
used
used
used
Ref. no.: 18138 Producer: DEMAG Year of construction: 2006 Clamping unit Clamping force: 80 ton Opening stroke: 850 mm Distance between tie bars: 370 X 3370 mm Mould height min.: 200 mm Mould height max.: 510 mm Platen size (h x v): 600 x 600 mm Injection unit Screw diameter: 22 mm Injection volume: 37 cm³ Shot weight: 32 g Injection pressure: 2580 bar Measurements and weight Dimensions: 4,50 X 1,28 X 1,95 m Machine weight: 4750 kg
used
Arburg Allrounder 520C 2000-800 Injection Moulding Machine Machine is in good working condition 200 Ton
used
Arburg Allrounder 570C 2200-1300 Injection Moulding Machine 220 Ton Distance between column : 580 mm x 580 mm Machine is in good condition
used
Arburg Allrounder 570 C 2000-675 Injection Moulding Machine 200 Ton Machine is in good condition
used
Clamping force [kN] 250 Dimensions of mounting plates (hxv) [mm] 750 min./ max. mold height [mm] 127 - 227 Maximum opening width [mm] 352-542 injection unit Screw diameter [mm] 22 Injection volume [cm3] 34 Injection weight [g] 31 Injection pressure [bar] 2000
used
used
This ARBURG Allrounder 520 C 2000-675 Injection moulding machine was manufactured in 2002 in Germany. It is included a pallet protective fence (approx. 100 kg // 2000x1100 mm).
used
This Arburg Allrounder 320 KS 700-100 Injection moulding machine was manufactured in the year 2001 in Germany and has 3467 production hours. It is equipped with an Arburg Selogica control unit.
used
Ref. no.: 17765 Producer: FERROMATIK MILACRON Year of construction: 2007 Clamping unit Clamping force: 230 ton Opening stroke: 600 mm Distance between tie bars: 660 x 660 mm Mould height min.: 250 mm Mould height max.: 690 mm Platen size (h x v): 930 x 930 mm Injection unit Screw diameter: 45 mm Injection volume: 382 cm³ Shot weight: 348 g Injection pressure: 2300 bar Measurements and weight Dimensions: 6,7 x 2,1 x 2,2 m Machine weight: 13500 kg
used
Ref. no.: 17766 Producer: FERROMATIK MILACRON Year of construction: 2008 Clamping unit Clamping force: 230 ton Opening stroke: 600 mm Distance between tie bars: 660 x 660 mm Mould height min.: 250 mm Mould height max.: 690 mm Platen size (h x v): 930 x 930 mm Injection unit Screw diameter: 45 mm Injection volume: 382 cm³ Shot weight: 348 g Injection pressure: 2300 bar Measurements and weight Dimensions: 6,7 x 2,1 x 2,2 m Machine weight: 13500 kg
used
Ref. no.: 16369 Producer: BATTENFELD Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg
used
warehouse no.: 503292 manufacturer: ARBURG type: Allrounder 470 C 1500-350 Selogica year of construction: 2003 operation hours: 48000 h clamping force: 1500 kN distance between tie bars h x v: 470 x 470 mm size of mould plates h x v: 650 x 650 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2050 bar measures of machine lxbxh: 4.68m x 1.3m x 2.18m total weight: 4410KG equipment included screen text german core pulling hydraulically 2x machine without material hopper Anti vibration mounts mould heating 6x
used
warehouse no.: 503294 manufacturer: ARBURG type: Allrounder 470 C 1500-350 Selogica year of construction: 2003 operation hours: 47000 h clamping force: 1500 kN distance between tie bars hxv: 470x470 mm size of mould plates hxv: 650x650 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2050 bar equipment included: screen text german machine without material hopper Anti vibration mounts measures of machine lxbxh: 4.68m x 1.3m x 2.18m total weight: 4410KG
used
warehouse no.: 503293 manufacturer: ARBURG type: Allrounder 470 C 1500-350 controller: Selogica year of construction: 2003 operation hours: 53000 h clamping force: 1500 kN distance between tie bars h x v: 470 x 470 mm size of mould plates h x v: 650 x 650 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2050 bar equipment included: screen text german core pulling hydraulically 2x machine without material hopper Anti vibration mounts mould heating 6x measures of machine lxbxh: 4.68m x 1.3m x 2.18m total weight: 4410KG
used
ARBURG 200 TON WITH ROBOT WORKING HOURS ARE PRESENT ON THE PHOTOS YEAR : 1999 TECHNICAL DATA: EUROMAP SIZE: 2000-675 CLAMPING FORCE: 2000KN SCREW 50mm closing force: 90 kn OPENING STROKE MAX 650mm I EXCELENT WORKING CONDITION, MACHINE IS WORKING DAILY PRODUCTION MACHINE IS AWAILIBLE IMEDIATELY WE ORGANIZE DISMANTLING LOADING AND TRANSPORT TO THE CUSTOMER
used
Adjustable ball track capacity approx. 4500 per hour
used
Heating output: 5.5kW, connected load: 16.5kW, weight: 2.61t.
used
Connected load: 42kW.
used
Connected load: 40kVA.
used
Max. clamping force: 350kN, max. opening force: 31.1kN, distance between tie-bars: 270x270mm, weight: 1.8t.
used
Ejection stroke: 35mm, weight: 700kg.
used
Clamping force: 270kN, opening stroke: 325mm, distance between tie-bars: 270x270mm.
used
Clamping force: 500kN, opening stroke: 325mm, distance between tie-bars: 270x270mm.
used
Clamp force: 750kN, heating output: 11kW, weight: 3t.
used
Clamping force: 500kN, heating output: 5.4kW, connected load: 23.9kW, weight: 2.4t.
used
Clamping force: 100t, heating output: 6,1kW, connected load: 35kW, weight: 3.95t.