british flag
Resale Logo

all used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information machines and plants for waste disposal and recycling  Hauck GmbH  http://www.hauck-entsorgungslogistik.de 
banner logo
start page > keywords all > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125832687 802

RYOBI 522GE for sale


Printing machine - Two Colour Ryobi Model 522GE Year 2012 Impressions 1 million Maximum sheetsize 375 x 520 mm Dampening Ryobimatic film dampening Details Suction tape in feeder, Semi auto plate change, plate cock ...
used machine
 
Printing machine - Two Colour
Ryobi
Model 522GE
Year 2012
Impressions 1 million
Maximum sheetsize 375 x 520 mm
Dampening Ryobimatic film dampening
Details Suction tape in feeder, Semi auto plate change, plate cocking, blanket + roller wash, sliced ink ducts
Condition as really as new
Available Direct
2012
Price  
  NL   request
125837272 1009

GALLMAC WMW 115 for sale
Gallmac WMW 115 Wheel Excavator


The machine is designed to peel off and extract material for transport or storage. It is used during earthworks and construction works.
used machine
 
The machine is designed to peel off and extract material for transport or storage. It is used during earthworks and construction works.
2011
44,500 EU?  
  PL   request
125832681 801

HEIDELBERG GTO52+ for sale


Printing machine - One Colour Heidelberg Model GTO52+ Year 1990 Impressions 37,5 million Minimum sheetsize 105 x 180 mm Maximum sheetsize 360 x 520 mm Dampening Varn Kompac III Details Weko electronic double shee ...
used machine
 
Printing machine - One Colour
Heidelberg
Model GTO52+
Year 1990
Impressions 37,5 million
Minimum sheetsize 105 x 180 mm
Maximum sheetsize 360 x 520 mm
Dampening Varn Kompac III
Details Weko electronic double sheet control
Plus version, gears for numbering installed
Sheet slow down device
Weko powder sprayer
Condition great condition


1990
Price  
  NL   request
125837273 109

AJAN SHP 260A for sale
Plasma cutter AJAN


Plasma cutter AJAN SHP 260A is a numerically controlled oxygen sheet cutting device, using original cutting tools mounted on it, and can be gas and plasma tools. With these tools you can make straight cuts and linear cut ...
used machine
 
Plasma cutter AJAN SHP 260A is a numerically controlled oxygen sheet cutting device, using original cutting tools mounted on it, and can be gas and plasma tools. With these tools you can make straight cuts and linear cuts, according to programmed cutting programs or by manually controlling the cutting path. Condition of the equipment good.
2015
34,500 EU?  
  PL   request
125828748 301

BATTENFELD TM 100 / 525 for sale
Injection molding machines


Manufacturer: Battenfeld Type of machine: TM 100 / 525 Year: 2006 Controlversion: B 4 Screen text: German Operating Hours 26.400 h Extras  ...
used machine
 
Manufacturer: Battenfeld

Type of machine: TM 100 / 525
Year: 2006
Controlversion: B 4
Screen text: German
Operating Hours 26.400 h

Extras
-robot interface
-new screw change in 2017

Technical details

Clamping unit
Clamping force: 1.100 kN
Size of mould platens (h x v): 640 x 663 mm
Distance tie bars (h x v): 420 x 420 mm
Mould opening stroke: 680 mm (max)
Mould height min.: 200 mm
Mould height max.: 450 mm
Max daylight: 830 mm
Hydraulic ejector - stroke: 140 mm
Ejector force forward/backward: 26,4 kN
Injection unit
Screw diameter: 40 mm
Ls/D ratio: 22
Injection pressure: 2100 bar
Stroke volume: 251 ccm
Shot weight, PS: 228,4 g
Nozzle pressure: 86 kN

Electric and Hydraulic Equipment

Adjustable barrel heating zones: 1+3
Pump power 15 Kw
Oil 250 L


Dimensions und weights
Total machine weight: 4.400 kg
Dimensions ( L x B x H ) 4,3 x 1,5 x 2,1 m


Available at our storage in Hannover)

free loaded on truck of the buyer or free delivery against freight reimbursement

the machine is offered function-tested

all our offered machines are in our own property
2006
Price  
    request
125834915 1005

CTE CS170E Bi-Energy, 17 m Working Height, Fits Throug for sale
All terrain cranes


; Gross weight [kg]: 2000; Rear tyres remaining: 70; Front tyres remaining: 70; Maximum lift capacity [kg]: 200
used machine
 
; Gross weight [kg]: 2000; Rear tyres remaining: 70; Front tyres remaining: 70; Maximum lift capacity [kg]: 200
2008
17,500 €  
  NL   request
125828718 1300

SULFURIC ACID PLANT 1500 MT New Surplus for sale
other machines


Sulfuric Acid Plant (Sulphuric Acid ) 1500 MT, 50 HZ, New Surplus The equipment for this plant is still packed in the manufactures shipping crates and has never been unpacked. The plant is stored in a secure climate con ...
new machine
 
Sulfuric Acid Plant (Sulphuric Acid ) 1500 MT, 50 HZ, New Surplus
The equipment for this plant is still packed in the manufactures shipping crates and has never been unpacked. The plant is stored in a secure climate controlled warehouse and is being kept as per manufactures guidelines. Brief outline of some of the equipment included, 23 MW GE Thermodyn Condensing Steam Turbine Generator, Converter, Hot Inter Pass Heat Exchanger, Cold Inter Pass Heat Exchanger, Steam injection vessel, Duct transition pieces, Main Blower, Air Inlet Filter, Drying Tower (DT), DT Mist Eliminators, DT Acid Distributor System, DT Support for Packing, HRS Steam Separator, Steam Injection Exhaust Head, Heat recovery Tower(HRT), HRT Mist Eliminators Demister, HRT Acid Distributor System (stage 2)HRT, Support for Packing (stage 2), HRT Acid Distributor System (stage 1), HRT Support for Packing (stage 1), Ceramic Insulation Block, Final Absorbing Tower (FAT), FAT Mist Eliminators Demister, FAT Acid Distributor System, FAT Support for Packing, Common Acid Pump Tank, HRS Boiler Package, HRS Blowdown Sample Cooler, HRS Steam Sample Cooler, HRS Blowdown Tank, HRS Boiler ailable due to a cancelled project., HRS Blowdown Tank Exhaust Head, HRS Acid Sample Coolers, HRS Acid Sample Enclosure, HRT Pump boot, HRS Diluter, HRS Heater, HRS Preheater, Liquid Effluent Pump, Steam Injection Sparger, Main Boiler
The Sulfuric Acid Plant is designed to be fed by solid sulfur. The equipment related to handling the solid sulfur was never purchased. However the engineering studies & design were completed and is ready to be requisitioned directly from the supplier if the new owner wishes to make the purchase. The product handled by conveyor is solid Sulphur, with the following characteristics:
Type Dry bulk solid powder
Sulphur > 99.5 % w/w
Inorganic ash < 0.4 % w/w
Carbon < 0.1 % w/w

All the equipment is new and was never installed and therefore, the Process Technology Licence associated with the plant has never been used and can be transferred to the new owner at a very affordable cost.
The guarantee can be provided to the new owner of the plant once the basic engineering of adapting the plant to the new site conditions have been completed.
The new owner of the plant will not have any restrictions on the engineering company they choose to complete the design, construction and commissioning of this plant.
new
Price  
  US   request
125832755 109

AGIE AGIEPLUS - HMC for sale
Wire Erosion Machine


table length: mmtable width: mmampere: A--------------------------------------------------: WORKING RANGE -WIRE CUTTING-: - worpiece length (max): 810 mm- worpiece width (max): 580 mm- workpi ...
used machine
 
table length: mm
table width: mm
ampere: A
--------------------------------------------------:
WORKING RANGE -WIRE CUTTING-:
- worpiece length (max): 810 mm
- worpiece width (max): 580 mm
- workpiece height (max): 250 mm
- X-axis travel: 300 mm
- Y-axis travel: 200 mm
- z-axis travel (vertical): 256 mm
ELECTRICAL SPECIFICATIONS:
- mains voltage: 380 V
- mains frequency: 50 Hz
DIMENSIONS / WEIGHTS:
- total weight approx.: 3000 kg
Machine is installed at the first floor of the bulding.



This ad was created with MODUL MWS - the software solution of LogoTech.
1995
Price  
    request
125823299 107

LVD Axel 3015 L for sale
CNC Laser Cutting Machines


OVERVIEW: Brand: LVD Model: Axel 3015 L Application type: Laser Cutting Machine type: Laser Cutting Machine Availability: Immediately Construction year: 2004 Production hours: 35000 Location: Norway Origin coun ...
used machine
 
OVERVIEW:
Brand: LVD
Model: Axel 3015 L
Application type: Laser Cutting
Machine type: Laser Cutting Machine
Availability: Immediately
Construction year: 2004
Production hours: 35000
Location: Norway
Origin country: Germany

GENERAL DATA:
Measurements width: 7400 mm
Measurements depth: 11000 mm
Measurements height: 4000 mm
Machine weight: 33250 kg

MAIN DRIVE:
Laser brand: FANUC LASER C4000
Laser power: 4 kW
Laser type: CO2

CONTROL UNIT:
Brand: GE FANUC
Model: Series 160i-L

MOVEMENT:
X-AXIS:
Movement: 3000 mm
Y-AXIS:
Movement: 1500 mm

MACHINE SPECIFIC DATA:
Number of cutting heads: 1
Size of cutting head 1: 7.5"

MAX MATERIAL THICKNESS:
Steel: 18 mm
Stainless steel: 8 mm
Aluminium: 6 mm

MEDIA:
Main electronic connection: 400 V
Power consumption: 87 kVA
2004
Price  
  NO   request
125832713 109

KROLLMANN ZE for sale
Auxiliary machines for drawing works


working range: 10 - 62 mmquality: hydraulisch FEEDING DEVICE for round hammer machineconstr.: Krollmannyear: 2004Hydraulical operated clamping- and feeding unit with material stopfor hammer-and reducing machines up to ...
used machine
 
working range: 10 - 62 mm
quality: hydraulisch
FEEDING DEVICE for round hammer machine

constr.: Krollmann
year: 2004
Hydraulical operated clamping- and feeding unit with material stop
for hammer-and reducing machines up to 62 mm material diameter.

clamping force: up to max. 37 000 N variable
feeding power: up to 27000 N max., variable
feed: max. 800 mm
pointing length: 250 mm

complete with:
- seperate hydraulic power unit
- motor power: 15 kW, 400 V, 50Hz
- electrical cabinet
- command desk
- additionally one sound isolating cabin for a hammer machine

Total weight: approx. 2 to.




This ad was created with MODUL MWS - the software solution of LogoTech.
2004
Price  
    request
125823298 104

JOTES SWA 25 for sale
Round Grinding Machines


Jotes SWA 25 cylindrical grinding machine Year of construction: 1975 Country of origin: Poland Technical data: the largest diameter of grinding: 250 mm distance between axes of: 1250 mm cross sectional height points:  ...
used machine
 
Jotes SWA 25 cylindrical grinding machine
Year of construction: 1975
Country of origin: Poland
Technical data: the largest diameter of grinding: 250 mm distance between axes of: 1250 mm cross sectional height points: largest workpiece diameter 135 mm: 80 mm largest lift table: 1270 mm largest diameter grinding wheel: 350 mm largest wheel width: 50 mm grinding wheel capacity Gen: 2166 rpm # the greatest weight of the workpiece mass: 150 kg electrical: voltage: 220/380 V frequency: 50 Hz total power of machine: 13,5 kVA weight and dimensions: weight: approx. 4000 kg Lxwxh: 3500 x 1400 x 1700 mm the price is a net price , plus VAT

The machine must be picked up in Neubrandenburg. Special shipping (shipping) arrangement. Loading possible.
If you have something to deliver, please contact us as soon as possible. (All types of machinery, industrial machinery, factory resolutions, building resolutions etc.)

Thank you in advance.

More information on request, sales as shown (see pictures). Changes and error in the technical details and information and subject to prior sale.
1975
1,500 €  
    request
125832704 107

HÄMMERLE 80/1250 for sale
Roller leveller


material width: 1250 mmmaterial thickness: 20,00 mmno. of straightening rolls: 19 diam. of the rolls ca.: 80 mmsheet thickness - min.: 0,80 mmspeed ca.: 2 - 20 m/min.run-in height: ca. 1000 mmtotal power requirement: kW ...
used machine
 
material width: 1250 mm
material thickness: 20,00 mm
no. of straightening rolls: 19
diam. of the rolls ca.: 80 mm
sheet thickness - min.: 0,80 mm
speed ca.: 2 - 20 m/min.
run-in height: ca. 1000 mm
total power requirement: kW
weight of the machine ca.: t
dimensions of the machine ca.: m
Hydraulic leveller for parts with sheet thickness from 0,80 - 20,00 mm

The straightening machine is mechanically reworked in 2018.

With infeed table with ball castors, outlet roller conveyor and incl. Control
cabinet.Documentation available.With CE conformity declaration.


Dimensions:
Machine about 2800 x 1850 x 2120 mm
Switch cabinet: approx. 1000 x 400 x 1900 mm
Hydraulics: about 2400 x 1250 x 1800 mm





This ad was created with MODUL MWS - the software solution of LogoTech.
1995
Price  
    request
125823296 104

OKAMOTO PSG 52 UDX for sale
Surface Grinding Machines


Surface grinders - horizontal Okamoto PSG 52 UDX bearing no 1105-02420 category flat grinding machine - horizontal make Okamoto type PSG 52 UDX built 1991 state second-hand machine control conventional storage France cou ...
used machine
 
Surface grinders - horizontal Okamoto PSG 52 UDX bearing no 1105-02420 category flat grinding machine - horizontal make Okamoto type PSG 52 UDX built 1991 state second-hand machine control conventional storage France country of origin Japan Li immediately eferzeit cargo base stock technical details loop length 550 mm grinding width 250 mm workpiece height 300 mm table top 450 x 250 mm grinding wheel dimensions 180 x 13 mm wheel - bore diameter 31.75 mm from spindle Center to table 400 mm SP indeldrehzahlen 3000 rpm dust extraction 0.4 kW machine weight approx. 400 kg space requirement approx. 1, 5 x 1.450 x 1.76 m additional condition: demonstration-ready accessories electrical 380 Volt permanent magnet plate 350 x 150 mm coolant system flange machine light operating line description machine slightly used - it's a used machine, therefore we sell under
Disclaimer of all warranties.
with nassschleif facility and 2 grinding wheels
1991
15,000 €  
    request
125831427 103

KRAFT MU-46S for sale
Knee-and-Column Milling Machine - univ.


x-travel:900 mmy-travel:650 mmz-travel:450 mmtable surface area:1235x460 mmT-slot (width-distance-quantity):18x80x5 mmmax. table load:800 kgturning speed range:(27) 30 - 1800 U/minspindle nose:50 ISOfeed stepless:X/Y/Z:0 ...
new machine
 
x-travel:900 mm
y-travel:650 mm
z-travel:450 mm
table surface area:1235x460 mm
T-slot (width-distance-quantity):18x80x5 mm
max. table load:800 kg
turning speed range:(27) 30 - 1800 U/min
spindle nose:50 ISO
feed stepless:X/Y/Z:0-1000 / 0-1000 / 0-500 mm/min
rapid traverse:X/Y/Z: 2200 / 2200 / 1100 mm/min
power capacity:5,5 kW
weight of the machine ca.:3600 kg
Machine size (LxWxH):1940x2200x2115 mm
3-Axis DRO:
universal milling head, manual:
working lamp:
CE and declaration of conformity:
complete cooling unit:
machine tools:
screws cover:
stepless feed:in allen Achsen
:
European electric:
:
:
Metric, 400V 50Hz 3 Phase:

Key Features Mounted inclusive price with 3-axis position indicator Stable and rigid construction Universal Swivel Head - Cutters (Huron) can be placed in any spatial angle Large working range of up to 460x1235mm (Optional 1635x500 mm 2000x500 mm) and up to 800/1.800 kg table load. Turcite-B coating for smooth running of the axes Vertical Universal head can rotate 360 ° for versatile cutting performance. X axis 900, 1300, 1500 mm Vertical and horizontal spindle each with its own strong drive Milling table pivotable in the X-axis Array of Standard Accessories Machine frame heavily ribbed and rigid Wide, stable and hardened guides guarantee stability and lasting accuracy Large, broadly supported table of ± 45 ° In the electrical equipment proven components from reputable manufacturers are used Automatic feeds and rapid feeds in all 3 axes All hand wheels (for the X-axis) are placed on the front and accessible to the operator Control panel can be positioned perfectly on pivoting boom The central lubrication ensures maintenance-free operation Precision ground guideways with hardened surface for long-term stability and wear resistance. Wide speed range (30-2050 / 27 steps) Standard Accessories 3-axis position indicator universal milling automatic central lubrication SK 50 cutter tool shank Ø 32mm halogen lamp Coolant system M24 tie rod, 2 pieces operating tool European Electrical Schneider or Siemens Aufsteckfräsdorn ISO 50/27 mm Aufsteckfräsdorn ISO 50/40 mm Operating instructions in German language CE version
new
Price  
    request
125823286 201

TORWEGGE H 321 for sale
Many sheet circular saws


Multi rip saw Torwegge type: H 321 machine-no. H321F194 chain width 160 mm cutting height approx. 90 mm motor 10 kW infeed motor 0,8 kW infeed speed 5 – 25 m/min. with 1 spare bushing and 1 spare motor ove ...

 
Multi rip saw Torwegge
type: H 321
machine-no. H321F194

chain width 160 mm
cutting height approx. 90 mm
motor 10 kW
infeed motor 0,8 kW
infeed speed 5 – 25 m/min.
with 1 spare bushing and 1 spare motor

overall size: L 1800 x W 1020 x H 1500 mm
weight approx. 1400 kg

 
Price  
    request
125831981 103

KRAFT MU-50SL for sale
Knee-and-Column Milling Machine - univ.


x-travel:1200 mmy-travel:700 mmz-travel:500 mm:500 x 1600 mm mmmax. table load:1800 kgT-slot (width-distance-quantity):5 x 18 x 80 mmspindle taper:50 ISOturning speed range:(27 Stufen) 30 - 2050 U/mindistance spindle nos ...
new machine
 
x-travel:1200 mm
y-travel:700 mm
z-travel:500 mm
:500 x 1600 mm mm
max. table load:1800 kg
T-slot (width-distance-quantity):5 x 18 x 80 mm
spindle taper:50 ISO
turning speed range:(27 Stufen) 30 - 2050 U/min
distance spindle nose and table:25? 525 mm
feeds:X/Y/Z: 0-1000 / 0-1000 / 0-500 mm/min
rapid travel x/y/z:2200 / 2200 / 1100 mm/min
power capacity:7,5 kW
weight of the machine ca.:5 t
machine dimensions LxWxH:2475 x 2260 x 2180 mm
universal milling head:manuell schwenkbar, 360°
DRO:3-Achsen
central lubrication:
halogen lamp:
:
European electric:im wesentlichen Schneider
:
CE-design:
:
Servo motors:in allen Achsen
screws cover:
machine vice:
round table, manual :
milling and boring equipment:

100 % before loading warranty: none one used knee and column milling machine-universal, make UNION Bielefeld, type USF 4, Baujahr 1970, Maschinen-Nr. 55/214
new
Price  
    request
125823281 103

MIKRON WF3S for sale
Tool-Milling Machines


Travels XYZ: 500-500-380mm Spindeltaper: Iso 40 Spindelspeeds: 50-2240 Tablesize: 700x400mm With angle table Quill Iso 40 Digital readout Heidenhain Power feeds and rapids on all 3 axes Coolant pump

 
Travels XYZ: 500-500-380mm
Spindeltaper: Iso 40
Spindelspeeds: 50-2240
Tablesize: 700x400mm
With angle table
Quill Iso 40
Digital readout Heidenhain
Power feeds and rapids on all 3 axes
Coolant pump

 
Price  
    request
125831481 103

KRAFT MU-50S for sale
Knee-and-Column Milling Machine - univ.


x-travel:1200 mmy-travel:700 mmz-travel:500 mm:500 x 1600 mm mmmax. table load:1800 kgT-slot (width-distance-quantity):5 x 18 x 80 mmspindle taper:50 ISOturning speed range:(27 Stufen) 30 - 2050 U/mindistance spindle nos ...
new machine
 
x-travel:1200 mm
y-travel:700 mm
z-travel:500 mm
:500 x 1600 mm mm
max. table load:1800 kg
T-slot (width-distance-quantity):5 x 18 x 80 mm
spindle taper:50 ISO
turning speed range:(27 Stufen) 30 - 2050 U/min
distance spindle nose and table:25? 525 mm
feeds:X/Y/Z: 0-1000 / 0-1000 / 0-500 mm/min
rapid travel x/y/z:2200 / 2200 / 1100 mm/min
power capacity:7,5 kW
weight of the machine ca.:5 t
machine dimensions LxWxH:2475 x 2260 x 2180 mm
universal milling head:manuell schwenkbar, 360°
DRO:3-Achsen
central lubrication:
halogen lamp:
:
European electric:im wesentlichen Schneider
:
CE-design:
:
Servo motors:in allen Achsen
screws cover:
machine vice:
round table, manual :
milling and boring equipment:

100 % before loading warranty: none one used knee and column milling machine-universal, make UNION Bielefeld, type USF 4, Baujahr 1970, Maschinen-Nr. 55/214
new
Price  
    request
125823274 107

TRUMPF TRULASER 5040 - 7 kW for sale
CNC Laser Cutting Machines


In production Beam on working hours: 13.700 Stand by working hours: 22.187 Cutting power: 7 kW Work area: -X: 3000 mm. -Y: 1500 mm. -Z: 150 mm.
used machine
 
In production

Beam on working hours: 13.700
Stand by working hours: 22.187

Cutting power: 7 kW

Work area:
-X: 3000 mm.
-Y: 1500 mm.
-Z: 150 mm.
2011
Price  
  ES   request
125829379 702

BOECKELS Metallsuchgerät, Boekels for sale
metal detector, fabr. Boekels, type EMC 50 x 12,5


with conveyor belt\r\ndimensions: 180 x 95 x 150 cm \r\n

 
with conveyor belt\r\ndimensions: 180 x 95 x 150 cm \r\n
 
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More ALL models (2 or more machines):
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Heidelberg GTO52+


Printing machine - One Colour Heidelberg Model GTO52+ Year 1990 Impressions 37,5 million Minimum sheetsize 105 x 180 mm Maximum sheetsize 360 x 520 mm Dampening Varn Kompac III Details Weko electronic double sheet control Plus version, gears for numbering installed Sheet slow down device Weko powder sprayer Condition great condition

other machines Sulfuric Acid Plant 1500 MT New Surplus


Sulfuric Acid Plant (Sulphuric Acid ) 1500 MT, 50 HZ, New Surplus The equipment for this plant is still packed in the manufactures shipping crates and has never been unpacked. The plant is stored in a secure climate controlled warehouse and is being kept as per manufactures guidelines. Brief outline of some of the equipment included, 23 MW GE Thermodyn Condensing Steam Turbine Generator, Converter, Hot Inter Pass Heat Exchanger, Cold Inter Pass Heat Exchanger, Steam injection vessel, Duct transition pieces, Main Blower, Air Inlet Filter, Drying Tower (DT), DT Mist Eliminators, DT Acid Distributor System, DT Support for Packing, HRS Steam Separator, Steam Injection Exhaust Head, Heat recovery Tower(HRT), HRT Mist Eliminators Demister, HRT Acid Distributor System (stage 2)HRT, Support for Packing (stage 2), HRT Acid Distributor System (stage 1), HRT Support for Packing (stage 1), Ceramic Insulation Block, Final Absorbing Tower (FAT), FAT Mist Eliminators Demister, FAT Acid Distributor System, FAT Support for Packing, Common Acid Pump Tank, HRS Boiler Package, HRS Blowdown Sample Cooler, HRS Steam Sample Cooler, HRS Blowdown Tank, HRS Boiler ailable due to a cancelled project., HRS Blowdown Tank Exhaust Head, HRS Acid Sample Coolers, HRS Acid Sample Enclosure, HRT Pump boot, HRS Diluter, HRS Heater, HRS Preheater, Liquid Effluent Pump, Steam Injection Sparger, Main Boiler The Sulfuric Acid Plant is designed to be fed by solid sulfur. The equipment related to handling the solid sulfur was never purchased. However the engineering studies & design were completed and is ready to be requisitioned directly from the supplier if the new owner wishes to make the purchase. The product handled by conveyor is solid Sulphur, with the following characteristics: Type Dry bulk solid powder Sulphur > 99.5 % w/w Inorganic ash < 0.4 % w/w Carbon < 0.1 % w/w All the equipment is new and was never installed and therefore, the Process Technology Licence associated with the plant has never been used and can be transferred to the new owner at a very affordable cost. The guarantee can be provided to the new owner of the plant once the basic engineering of adapting the plant to the new site conditions have been completed. The new owner of the plant will not have any restrictions on the engineering company they choose to complete the design, construction and commissioning of this plant.

CNC Portal Milling Centre Mazak AJV 60/80


Used CNC Portal Milling Centre Mazak AJV 60/80 from 1995 The machine was built in 1995 but installed in 1996. CNC Control: Mazatrol M32a Table size: 1250 x 2240 mm Maximum table load: 4000 kg X-Axis movement: 2000 mm Y-Axis movement: 1400 mm Z-Axis movement: 508 mm Maximum workpiece dimensions: 2240 x 1480 x 600 mm Number of tools in magazine: 30x Tool taper: DIN 69871A (ISO 50) Spindle speed: 35 - 10000 1/min

MOBILI A ARREDI MOBILI A ARREDI


FURNITURE AT THE FURNITURE For sale exclusively at 16:30 next 17/07/2018 in Ardesio, Bergamo To view the lot please contact us on 0307751645 and make an appointment TALL UNITS with no 4 doors + # 4 BOTTOM DRAWERS and # 4 CABINETS with UPPER SHELVES, DIM. 280x45xH196 CM, DARK BROWN WOOD COLOR 4 wardrobe doors, DIM. 210x46xH197 CM, WOOD and cream COLOR DESK composed of 2 DIM LOCATIONS. 180x80cm CM EACH, with semicircular TERMINAL DIAM. 165 CM CHESTS of DRAWERS with 3 drawers, 2 and no HONEY CLOSET with full-height DOORS # 4, # 4 drawers and 1 DOOR # above, DIM. 225x45xH197 CM, WOOD and cream COLOR DESK DIM. 200x100 with PENINSULA DIM. 90x60 CM, DARK BROWN WOOD COLOR CABINET with 3 DOORS and 1 # TOP # DISPLAY CASE, DIM. 140x45xH82/H158 CM, color DARK BROWN WOOD DESK DIM. 200x100, DARK BROWN WOOD COLOR MODELLOESTUDIO, MARCATOSHIBA, 166 printer/copier Scanner, CANON LIDE 210 MODEL, BRAND. ETC ETC ETC ... ... ...

Attrezzature per edilizia


CONSTRUCTION EQUIPMENT For sale exclusively at 16:30 next 17/07/2018 in Ardesio, Bergamo To view the lot please contact us on 0307751645 and make an appointment Drill press, MODEL RAGTO35PU, SERIAL NUMBER 932470, HOFMANN BRAND Band saw, WHITE BRAND, model, year, SERIAL NUMBER 13/000396 270 MAN 1996 Band saw machine, MAKE MODEL SERIAL NUMBER 1068N 400 EURO TSC EHR, year 2007 GROUP # 5 CONCRETE BUCKETS, brand BUTTI, various sizes and capacity (capacity up to 400LT) METAL SILOS, DIAM. ABOUT 220 CM, length. ABOUT 400 CM METALLIC CONTAINER, DIM. 240x600xH250 CM, YEAR 1993 MOBILE SCAFFOLDING, BRAND FARAONE, TOP MODEL SYSTEM, DIM. 135X245 CM FUEL TANK WITH NOZZLE, DIAM. 150 CM, length. 400 CM PVC BOX CONSTRUCTION FOR TOILET GROUP INVENTORIES AND CONSTRUCTION DEBRIS. ETC ETC ETC. ..

Boring Mills TOS VARNSDORF H 63 A


Boring machine TOS VARNSDORF H 63 and produced in 1986. Technical data: -table dimensions (length x width): 800 x 890 mm -spindle diameter: fi 63 mm -spindle motor power: 5.5 kW -overall dimensions (length x width): 2100 x 3900 mm -weight: 4500 kg -planszajba complete -overall dimensions of the machine (h x w x d): 220 x 183 x 370 cm

Hammer mills WEEE shredder Electric 37 Kw


Online auction closes 28 of june 2018 (28/06/2018). troostwijkauctions.com/uk/recycling-machines/01-25192/ Search Troostwijk auction nro: 25192 (or use below the link go to auction / BID) International auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the highest bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Hammer mills Jeffrey (refurbished) Model 50x30 USA


Online auction closes 28 of june 2018 (28/06/2018). troostwijkauctions.com/uk/recycling-machines/01-25192/ Search Troostwijk auction nro: 25192 (or use below the link go to auction / BID) International auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the highest bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Wheeled excavators Fuchs MHL 340


Online auction closes 28 of june 2018 (28/06/2018). troostwijkauctions.com/uk/recycling-machines/01-25192/ Search Troostwijk auction nro: 25192 (or use below the link go to auction / BID) International auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the highest bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Combined Frame clamp - laminating press KALLESOE


Frame clamp press: Working length. Max 2800 mm Working height Max 2300 mm 5 cylinders (3 from the top and 2 from the side) Laminating press: Working length. Max 2500 mm Working height Max 1300 mm Made in Denmark Pressure regulator. Transport dimensions Weight 700 kg

Shredders MOCO 4-rotor shredder AZ 17 (shear shredder)


Online auction closes 28 of june 2018 (28/06/2018). troostwijkauctions.com/uk/recycling-machines/01-25192/ Search Troostwijk auction nro: 25192 (or use below the link go to auction / BID) International auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the highest bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Double shaft shredders MOCO Shredder AZ 15 (good condition)


Online auction closes 28 of june 2018 (28/06/2018). troostwijkauctions.com/uk/recycling-machines/01-25192/ Search Troostwijk auction nro: 25192 (or use below the link go to auction / BID) International auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the highest bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Shredders Shredding truck Volvo Hydraulic shear shredder


Online auction closes 28 of june 2018 (28/06/2018). troostwijkauctions.com/uk/recycling-machines/01-25192/ Search Troostwijk auction nro: 25192 (or use below the link go to auction / BID) International auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the highest bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Hammer mills Pallmann stainless steel Model 4-5


Online auction closes 28 of june 2018 (28/06/2018). troostwijkauctions.com/uk/recycling-machines/01-25192/ Search Troostwijk auction nro: 25192 (or use below the link go to auction / BID) International auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the highest bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Magnetic separators Steinert Electro drum (trommel) magnet


Online auction closes 28 of june 2018 (28/06/2018). troostwijkauctions.com/uk/recycling-machines/01-25192/ Search Troostwijk auction nro: 25192 (or use below the link go to auction / BID) Internationl auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the higheist bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Drycooler unuse.d 110 kW Kelvion IF-MA102T4H-091H06D


Unused Dry cooler Manufacturer: Kelvion Model: IF-MA102T4H-091H06D Medium temperature: 52,5 ºC. Cooling capacity: 110 kW by 36 ºC outside Fans: 2 pieces, Connection: 2xDN80 Dimensions: 3,0 m lenght, 1,2m width 1,0m, height + legs 0,5m height on pallet Weight: 422 kg. Year of production: 2016 Comes from canceled project.

Dry cooler unKELVION 1200 kW Kelvion IF-PC203T3H- 091H06D


Unused Dry cooler Manufacturer: Kelvion Model: IF-PC203T3H-091H06D Medium temperature: 92 ºC. Cooling capacity: 1200 kW by outside temp. 36 ºC Fans: 6 pieces, Connection: 2xDN100 Dimensions: 5,9m lenght x 2,2m width x1,0m height + legs 0,9m height on pallet Weight: 1432 kg. Year of production: 2016 Comes from canceled project.

Filling equipment and sealing machines Gallon line - Ammonia,DEEP WELL EQUIPMENT,


Used Water treatment, bottling lines and auxiliary equipment. Details of the Machine Line are in the file Equipment list: • 5-Gallon line - 2010 • 5L line equipment – 2009-2010 • Ammonia refrigeration – 2009 • Water tanks: 50m3 – 30m3 – TBD • SIPA (Retail 0.5L-1.0L-1.5L line) – 2002 • WT & CIP equipment – TBD • DEEP WELL EQUIPMENT – TBD

Folding box cartoning machines Schut Sprinter S1000


Sprinter S1000 carton sealer Schut Systems offers top loading carton sealers in various speeds that can be integrated in an existing packaging line. The machine closes the carton made of duplex or corrugated cardboard and seals it with hotmelt. This particular line is still in production till week 3 of June. Very good working condition. This machine comes complete with automatic box-unfolding unit. From there collected on a conveyor belt. On the conveyor it allows to put product inside the unfolded box. The belt automatically brings the box with the product to the Sprinter that glues and closes the box. It can only be offered as a complete line with the unfolding machine, belt, sprinter with glue unit. Installation is negotiable

Deep drawing packaging machines Multivac thermoformer R275 MF


Multivac R 275 MF The Multivac R 275 MF thermoforming packaging machine enables the production of MultiFresh™ vacuum skin packaging in large batches. It offers a great degree of variability with regard to MultiFresh applications. The packs are easy to open by means of an opening aid. The machine can be optionally designed for the manufacture of vacuum and MAP packaging. MultiFresh In the case of MultiFresh vacuum skin packing, a special skin film is used, which envelops the product without tension like a second skin, and which seals allover to the lower web. The upper web passes through a heating station to activate the film proper- ties, and it is then pre-stretched in the sealing die. Have a look of the particular machine in production.

Baader 601 separator


Baader 601 soft separator In very good condition Baader 601 fish/meat separator. This machine is capable of processing up to 1200kg or raw product per hour. ( depending on type of product ) With this efficient compact machine you can save up to 75% of salmon meat from their frames. ( depends on filleting ) Very capable of processing several types of fish/ meat and poultry. Technical Data: operator requirements: 1 person drum hole diameter: 3 and 8 mm throughput: approx. 1200kg/ hour The throughput values vary extremely in dependence of the hole size in the perforated dum, the type of feeding, the product and its pre-treatment (e.g. degree of pre-grinding), the feeding temperature, the selected pressure etc. The values for each application have to be determined individually between the customer of the machine and the supplier. Customer Benefits: highest end product quality reduced labour costs highly efficient with minimal space requirements user-friendly easy and time saving cleaning sanitary standards recognised world-wide gentle product processing reduced machine wear USDA approved and CE labelled ergonomic machine system castors for easy handling of machine

Packing systems vertical Innotech VFFS Revo 3800-S


Innotech vertical bagging machine Excellent pre-owned Innotech vertical bagging machine. This is a Revo 3800-S VFFS machine capable of packing up to 80 bags per minute. Thanks to impulse sealing and a continuous packing-flow this machine reaches very high packing numbers in very little time. Delivered with 1 tool for 30cm wide pouches, different sizes are possible with the purchase of a new mould. Bag width can vary between 80-350mm. Length of the bag can reach up to 550mm. With a large touch screen this machine can be set-up very easily, capable of storing hundreds of pre-programmed programs for each individual product. This particular Revo equipped with several options like; Powered film unwinder Side folding unit to make a fold for a ‘self’ supporting pouch. Label sensor to make accurate bags for pre-printed film. This to ensure every pouch is exactly the same. Impulse sealing Automatic film-unwinding adjustments. This system makes sure the film is guided correctly through the machine, when it’s a little off-centre the Innotech will automatically adjust this to the centre again.

Current transformer KPB Intra CTSO 17 KPB Intra CTSO 17


Set of 3 current transformer, medium Voltage, 50/75A, 50 Hz 17,5/38/95 kV, class 0,25 Price is for all 3 transformers.

Shinohara 52-4


-Four colours Straight machine max size 37x52 cms. -Year 2008, Only 11 mil. impressions -Semi automatic plate change SPC -Shinohara Alcool continuous dampening with Baldwin cooling unit -Console with CIP 3 software installed, all automatic ink and plate registers PCC -Automatic blankets and rollers washers ABW -In production, any print test possible

Roland 505 OB LV


ref. 517 Roland 505 OB LV format 53x74 cm, year 2002, straight 5-0, lack tower, stock 0,04-1 mm, Vmax=18 000 s/h, double size of transfer and impression cylinders, auto format setting, PPL, RCI, Rolandmatic Delta, IR/TL dryers, Air Glide delivery, Grafix, Rietschle air center, all automatic washers, ink units temperature control, in production, price: 180 000 EUR FCA

Shredders Screw shredder Refurbished


Online auction closes 28 of june 2018 (28/06/2018). troostwijkauctions.com/uk/recycling-machines/01-25192/ Search Troostwijk auction nro: 25192 (or use below the link go to auction / BID) Internationl auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the higheist bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Shredders Hammel 850 type EUREC EUREC Z85


Online auction closes 28 of june 2018 (28/06/2018). troostwijkauctions.com/uk/recycling-machines/01-25192/ Search Troostwijk auction nro: 25192 (or use below the link go to auction / BID) Internationl auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the higheist bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Welding Machines ZDIS GLIWICE YUN 4000-2


Oxygen burner ZDIS GLIWICE YUN 4000-2 was built in 2004 by ZDIS Gliwice. Numerically controlled cutting machine for thermal cutting of YUN 4000-2 is designed for oxygen cutting curved sheets and low-carbon steels. Technical parameters: -overall dimensions: 15x3 m, it can be reduced because it is modular -two oxygen burners and the third burner with plasma routing -maximum cutting width: 4000 mm -gas combustible: acetylene -power consumption: ok. 1.5 kVA -compressed air: min. 0.4 MPa, max. 20 m3/h -water: min. 0.1 MPa, max. 0.12 m3/h Part of the cutter consists of the following main units: -roadway -trolley with longitudinal and transverse drive -gas installation -mikrokomputerowy control MOUSSE -control unit ZSP -bottom bracket oxygen: 2 PCs. -installation of the socket -dimensions of the teams drive longitudinal and transverse (width x height x depth): 5450 x 1675 x 2500 mm, weight: 1400 kg -overall dimensions of the roadway (length x height x): 14000 x 600 x 5000 mm, weight: 1800 kg -the machine burner GCE with valves and fuses przypalnikowymi and a set of nozzles to the cutting thickness from 3-150 mm: 2 Kit. -DTR (motor and technical documentation) Optional equipment cutting ZDIS GLIWICE YUN 4000-2: -team to the sprinkler water mist: 1 PCs. -team to bevel edge for 0-45 degrees, straight line cutting: 1 PCs. -ASTER to support work in developing technology programs: 1 PCs.

Granulators Pallmann 200 Kw (12-12)


Online auction closes 28 of june 2018 (28/06/2018). abcs://abc.troostwijkauctions.com/uk/recycling-machines/01-25192/ Internationl auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the higheist bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Hammer mills Scrap shredder Diesel 500Hp


Online auction closes 28 of june 2018 (28/06/2018). abcs://abc.troostwijkauctions.com/uk/recycling-machines/01-25192/ Internationl auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the higheist bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Cable granulating systems GUIDETTI Sincro 750 (big system)


Online auction closes 28 of june 2018 (28/06/2018). abcs://abc.troostwijkauctions.com/uk/recycling-machines/01-25192/ Internationl auction of used recycling machines. Such as screw shredder, scrap hammer mill shredder, mobile scrap shear, sorting house, granulators, shredders, separation magnets, scrap cable processing system and lots of other useful machine located in Hauho, Finland. Total 20 different recycling machines. Machines (Lots) will be sold to the highest bidders as long as the higheist bid will be reasonable towards the LOT value (Subject to allocation). Warehouse yard must be cleared from the LOT machines latest 16.07.2018.

Grinding machine tools TACCHELLA 4AMP


Tool grinder Tacchella 4AMP was produced in 1987. Technical data tool grinders Tacchella 4 AMP: -table clamping surface: 140 x 900 mm -height of the axis points on the surface of the table: 155 mm -the largest diameter grinding: 300 mm -Manual table travel: 400 mm -hydraulic table travel: 400 mm -manual cross table travel: 200 mm -manual vertical stroke: 250 mm -the largest distance from table surface to spindle axis grinding wheel: 345 mm -the largest distance between centres horses: 510 mm -the largest distance between centres of the head cap and tailstock: 410 mm -turn the spindle grinding wheel in the horizontal plane: +-180 degrees -the minimum distance of the table from the table surface to spindle axis grinding wheel: 95 mm -turn the spindle grinding wheel in vertical plane: +-20 degrees -turn the table to the right: 90 degrees -turn the table to the left: 75 degrees -the largest grinding wheel diameter: 200 mm -table speed hydraulic drive: 0-10 m/min. -the amount of grinding wheel spindle RPM: 2200, 3200, 4400, 6400 RPM. -raising the spindle head electro-mechanical top/bottom -table feed longitudinal hydraulic and manual -engine power driving the spindle grinding wheel: 1.5 kW -overall dimensions (w x l x h): 1320 x 1555 x 1430 mm -weight: 1200 kg

Grinding machine tools PONAR NUA 25


Tool grinder PONAR NUA 25 was built by Ponar Kowary in 1983. The grinder is ideal for grinding tools and accessories. Technical parameters of grinding machine NUA 25: -table clamping surface: 915 x 135 mm -the largest distance between centres horses: 685 mm -the largest distance between centres of the head cap and tailstock: 465 mm -height of the tusks over the surface of the table: 125 mm -longitudinal movement of table: 410 mm -lateral movement of table: 205 mm -steering angle: +-45 ° -the largest distance from table surface to spindle axis grinding wheels: 310 mm -turn the spindle grinding wheel in vertical plane: +-15 degrees, 90 ° -turn the spindle grinding wheel in the horizontal plane: 340o -the amount of grinding wheel spindle RPM: 3850 and 5635 Rev/minute -power dressing spindle motor: 0.55 kW -overall dimensions: 1325 x 1240 x 1250 mm -mass of the grinders: 910 kg -dust absorber -DTR

Bending Presses DURMA HAP 2035


Press brake SCHWENKBIEGEMASCHINE DURMA HAP 2035 produced in 2005 year. Characteristics: -pressure: 35 tons-bending length: 2050 mm -outreach: 350 mm -distance between columns: 1650 mm -stroke: 125 mm -handle speed: 120 mm/s -working speed: 9 mm/s -the speed of return: 86 mm/s -oil capacity: 60 l -engine power: 4 kW -overall dimensions (h x l x w): 2060 x 1595 x 2950 mm -weight: 2600 kg

Extrusion blow molding machines UROLA MRS-M4


UROLA MRS-M4 Rotary extrusion blow molding machineNmber of molds: 4 Number of heads: 1 Operation: Oleodynamic-Mechanical Molds clamping force: 3000 kg Maximum production depending on the container: 2600 P / H Packaging dimensions: Blowable volume: (Maximum capacity): 2000cc Maximum diameter: 110mm Maximum height: 325mm Dimensions of plate and mold: Maximum opening molds: 140mm Minimum half-mold thickness: 80mm (* For the rest of the dimensions, see the drawing of the mold carrier) Extruder: Screw diameter: 80mm Electric motor power: 40 Kw Number of thermoregulable zones: 10 Plasticizing capacity: 140 kg / h Maximum consumption: Total installed power: 95 Kw Average power consumed: 75 Kw Water at 7º C, 4 Kg / cm2: - Flow: 15 m3 / h - Refrigerating power consumed: 40000 kcal / h AIR AT 8 Kg / cm2 - Flow rate: 1.4 m3 / min Air pressure: 5 - 7 bar

Numerically Controlled Machining Centres DIGIMA E9 2030 D


Machining centre DIGIMA E9 2030 D was built in the year 2015. The machine is designed for cutting wood, plywood and plastics. Technical parameters: -table size: 2050 x 3050 mm -working space (X, Y, Z): 2000 x 3000 x 850 mm -the maximum spindle speed: 22000 rpm, inverter -HSD spindle (Italian): 10 kW, liquid cooling -move the X axis: servo drive 3000, rack -move the Y axis: 2 servo drives in 2000, gears -move Z axis: servo drive 2000 in, ball screw -THK guides: Japan -maximum speed: 20 m/min. -quick stroke: 50/50/15 m/min. -industrial control: OPEN control OSAI -positioning accuracy: ± 0.05/300 mm -AC power supply: 380 V -machine construction: steel, welded -weight of the machine: ok. 8000 kg The equipment machining centre DIGIMA E9 2030 D:-software extensions SurfCAM 3 Axis Base for 5 Axis Advanced Edition-post SurfCAM to control OSAI: E9-OSAI driver: 5-axis, simultaneous-HSD spindle 10kW, 22000 RPM. -table with aluminium profiles with T-these-automatic, carousel tool changer: 8 positions tool-tool cones: 4 PCs. -electronic measuring tools-a set of basic maintenance tools-DTR: in Polish language-CE Declaration of conformity

CNC Milling Machines LAGUN FBF 2600


Milling machine CNC ?o?owa LAGOONS FBF 2600 built 1992 year in Spain, by the renowned brand Maquinaria lagoons. Technical parameters of CNC milling machines LAGOONS FBF 2600: Table: -CNC: Heidenhein TNC 360 -surface area: 2600 x 800 mm -the number of T-those: 5 -T width-these: 22 mm -T spacing-these: 140 mm maximum table load: 4500 kg Crossings: -longitudinal movement of table in X axis: 2500 mm -movement in the Y axis: 940 mm -vertical travel in z-axis: 1000 mm Spindle: -spindle taper: ISO 7388/1-50, DIN 69871-A -engine power: 20.3 kW -spindle speed continuously adjustable: 40-2100 1/min. -lower adjustment range: 1 40-518/min. -upper control range: 519-2100 1/min. -the maximum torque of 90 Kg x m: 40-200 1/min. X, Y, Z Axes: -feed: 0-2250 mm/min. -feed rate accelerated: 6000 mm/min. -axial cutting force: 2500 daN -DC motor (X, Y, Z): 27-17, 5-27 Nm Cooling: -Coolant pump power: 0.28 kW -coolant capacity: 50 l/min. coolant tank capacity: 120 l Accuracy: -SEO: 0.020 mm -repeatability: 0.010 mm Overall dimensions of the machine X X Y x Z: 4800 x 2800 x 2900 mm (length X you need to add after 2000 mm catwalk in left and right) Weight of the machine: ok. 9800 kg

Sheet Metal Shears ZAMECH NG 13


Guillotine ZAMECH NG 13. Technical data: -the greatest thickness of cut metal plate: 13 mm -the maximum length of cut metal plate: 3080 mm -length: 3250 mm -set up the side walls: 3200 mm -power requirements: 21.5 kW -the number of knife strokes per minute: 12 -flywheel diameter: 1100 mm -number of turns of the handwheel on the minute: 500 -outreach: 600 mm -outreach racks: 600 mm -overall dimensions of the machine (w x l x h): 3300 x 4300 x 3050 mm -the weight of the margin squeeze: 15500 kg -DTR-technical-functional

Plate Edge Milling Machines PFM HUGH SMITH 10000 x 40


Bevel head bevel cutter 10 m x 40 mm for bevel on sheet metal cabin flowing with man brand: HUGH SMITH 6 supports for sheet metal multiple wall controls Accessories: cones, cutters, etc. maximum thickness of 40 mm (MORE PASSED ALSO 50 mm) retrofit year 2013 (total: electric, pneumatic, etc.)

CNC Horizontal Machining Centre Mazak PFH 4800


Table/Pallet: 400 x 400 mm Number of tables/pallets: 2 X-Axis travel: 560 mm Y-Axis travel: 630 mm Z-Axis travel: 600 mm B-Axis swivel: 0,001 degrees Spindle taper: MAS BT 40 Pockets in tool magazine: 80 Spindle speed: 35- 25.000 RPM Control: Mazatrol Fusion 640M

Extruding lines Dr.COLLIN 3 LAYERS CO-EX LINE 30-45-30


Dr.COLLIN 3 LAYERS EXTRUSION LINE screw diameters 30-45-30 mm 25 L/D n.5 nozzles available diam.: 40-60-90-115-130 mm blow ratio: 1.27 – 1.75 film width: 85 – 200 mm film thickness: 150 – 250 Micron haul off core diameter: 152 mm winder: Z speed of haul off / winder: 5 – 22 m/min web tension: automatically worked hours: 57800 construction year 1996 blow bubble cooling with water automated throughput control

SCAFFALATURE Muletti per Magazzino


Racks & Forklifts for Warehouse For sale exclusively at 10:30 next 17/07/2018 at our offices in Bergamo The merchandise is kept Cusago (Mi) To view the lot please contact us on 0307751645 and make an appointment Detailed catalogue available Racks & equipment -metal baskets stacking storage, about 160 -various types -power tools (drills, screwdrivers, jigsaw, manual strapping tool) -storage boxes (various sizes), nr. 16 -various material for packaging etc. Forklifts and pallet trucks -forklifts Pimespo mod. 5253, 1,000 kg Capacity 10 TX idea, year: 1999 -forklifts OM mod. E-25 N, payload: 2,500 kg -walk-behind Sweeper Maspel -hand pallet truck, nr. 7 -Manual lifters, nr. 3 Various Furniture and office equipment (# 7 workstations desk complete with seat), as well as accessory equipment of various kinds (# 2 sat navs, digital cameras # 2)

HEIDELBERG GTO52-1


D116 HEIDELBERG GTO52 (year 1992) Format 360 x 520mm / Alcolor dampening with Technotrans / Version plus without N+P / Quick Action Plate Clamps / App. 7 mio. Impressions. Very good working condition, totally free of damages. Available: Immediately (Test is possible) Location: Belgium

HEIDELBERG SM102-2


D291 HEIDELBERG SM102-2 (Year 2000) CP2000 / Alcolor dampening Technotrans / Conventional Plate Clamps / Automatic wash-up equipment / Automatic size setting from feeder / Steel plate in feeder and delivery / App. 68 mio impressions. Available: Immediately (test in production is possible) Location: Belgium Our price proposal: 145000 EUR. (FCA) Machine in very good working condition, always maintained by Heidelberg BNL (Full Service Contract). Machine is totally free of damages.

HEIDELBERG SM52-4


D438 HEIDELBERG SM52-4 (Year1998) CPC 1.04 in combination with CP-Tronic / Alcolor dampening with Technotrans (new from 2017) / Autoplate / Automatic wash-up equipment (all rollers, plate cylinders, blanket cylinders and impression cylinders) / Automatic size setting from CP-tronic / Automatic impression setting / Electronic double sheet control / Suctiondrum in delivery / Alphatronic 200 powder spray / Maximum speed 15000 / App. 95 mio. Impressions. Available: Immediately (inspection is possible in production.) Location: Belgium Machine in very good working condition, always maintained by Heidelberg BNL (Full Service Contract). Machine is totally free of damages.

HEIDELBERG SM74-4+L


D479 HEIDELBERG SM74-4+L (Year1999) CP2000 / Alcolor dampening with Technotrans / Autoplate / Automatic wash-up equipment (all rollers, plate cylinders, blanket cylinders and impression cylinders) / Automatic size setting / Automatic impression setting / Electronic double sheet control / Suctiondrum in delivery / Alphatronic 200 powder spray / Ink Temperature control / Coating unit with Chambered Ductor Blade / IR Dryer COM CON 110 / Maximum speed 15000. App. 97 mio. Impressions. Available: Immediately (inspection is possible in production.) Location: Belgium Machine in very good working condition, always maintained by Heidelberg BNL (Full Service Contract). Machine is totally free of damages.

Capi di abbigliamento arredi per negozio


Clothing and furniture store For sale exclusively on next 17 July at 09:30 at our offices in Bergamo For info on how to participate contact us at 030 7751645, business hours The goods are kept in Isola della Scala (VR) Garments, about 3,500 pieces so divided: -Nr. 9 boxes swimwear -Nr. 18 shoe boxes -Nr. 1 boxes bags -# 2 boxes scarves -# 8 drying racks with clothes -# 1 box containing hats, scarves and bags -# 3 Saddam high happy clothes Shop furniture and furnishing -patio furniture store, consisting of furniture (cabinets, racks, pedestals, tables, chairs, etc) and related accessories (hangers, clothes hanger rods, shelves, etc), all taken apart -various Accessories and furnishings (vases, # 2 talking heads with lamp, # 1 statue height 2.5 mt, lamps and the like, spotlights, various productions)

CNC Vertical Machining Centre 5-Axis Mazak Variaxis 500-5x-II


Pallet size 400 x 400 mm. Movement x-Axis 510 mm. y-Axis 510 mm. z-Axis 460 mm. Number of tools in magazine 60 pieces. Maximum spindle speed 25.000 R/min. Tool taper MAS BT-40 Big Plus. CNC control Mazatrol Matrix

CNC Turning Centers DOOSAN Puma 3100 L


CNC lathe DOOSAN PUMA 3100 L Total weight (approx.) 5850 kg Rotary Drills Continuous Variable (rpm): 20-2800 Front bearing diameter: 160 mm Bore diameter: 115 mm Internal diameter of the draw tube: 103 mm X-axis stroke: 293 mm Z-axis travel: 830 mm X / Z Axis Rapid Traverse: 30/30 (m / min) Work shift in X / Z-linear interpolation (max.): 14000 (mm / rev) X / Z Ball Screw Diameter: 32/40 mm Average diameter above bed max. 850 mm Swing over support max. : 670 mm Max. working diameter over bed: 525 mm Max. drilling length in chuck: 760 mm Max. Reverse Bar Diameter: 102 mm Max. workpiece weight without the use of a tailstock (including chuck weight = 55 kg): 390 kg Max. workpiece weight using a tailstock (including chuck weight = 55 kg): 1000 kg Control system: DOOSAN FANUC

Punching machines Heidelberg Cylinders package


Four Heidelberg Cylinder in package : - Heidelberg Cylinder S 54x72 cms. with ink unit and rollers - Heidelberg Cylinder S 54x72 with ink unit and rollers - Heidelberg Cylinder OHZ 50x70 for die cutting - Heidelberg Cylinder KS 38x52 with ink unit and rollers All machines complete with accessories, no damages
Get the latest machine offers by email: order newsletter