all used for sale

This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine.

General SKU223S097 MakeK.F. Alliance Eng. Limited (UK) LocationBarneveld CEcheck TypeSH Main Features MaterialStainless steel Length2300 mm Width400 mm Specified Features - Vibro feeder Vibro feedercheck Feeder width400mm Feeder length2300mm Feeder height130mm Closedcheck Inletdia. 240mm (3x) dia. 200mm (1x) Outletdia. 240mm With motor1.5 kW 230/400 Volt MaterialStainless steel 1.4301 (304) General No.8868 Year of construction2002 Mounted on framecheck Floorspace3,1x0,8 M Total height1,8 M Weight1200 KgStarchOther chemicalRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherBiopharmaceuticalOther pharmaceuticsOrganicsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsPlastic & rubberMinerals & inorganicTea, herbs & coffeeOintmentsGeneric medicinesPowdered foodsVibro feedersConsumer wasteKF Alliance Engineering Ltd.Industries > ...

Clamping force: 1300kN, screw diameter: 40mm, max. injection pressure: 2120bar, shot volume: 182m³, shot weight: 153g, tie bar spacing: 470mm/470mm, platen dimensions X/Y: 650mm/650mm, min. mold installation height: 275mm, max. opening stroke: 850mm, centering: 125mm. Machine dimensions X/Y/Z: approx. 4600mm/1600mm/2200mm, weight: approx. 5500kg. The clamping unit shows an oil leakage at the clamping cylinder. Documentation available. An on site inspection is possible.

General SKU277U494 LocationBarneveld MakeAllgaier TypeTSM 950/1 Main Features MaterialStainless steel Surface0.72 m2 Sizes diameter950 mm Specified Features - Tumbler screener Sieve surface0.72 m² Number of sieve decks:1 Sieve sizesDia: 950mm With covercheck Inlet195 mm Outlet95 mm Motor0,75 kW, 220/380 volt, 2800 rpm Sieve perforation2mm With ball cleaningcheck Tumbler screening machines MaterialStainless steel 1.4306 (304L) General No.155 Year of construction1982 Mounted on mild steel framecheck Floor space1,4x1,4 m Total height1,2 m Weight400kgFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsBiopharmaceuticalDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsAPIMine ...

Allgaier vibrating sieve, Sieve diameter:: 490 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Elec:: 380/400 V , Dimensions (mm): 1100x700 H 1100, Powder discharge height (mm): 815, Electric:: 380/400V , Powder outlet height (mm): 815

3 Allison Turbine Detroit Diesel Allison Type 501 KB Year of manufacture 1980 alternator RATED 3860KW alternator DUTY 3355KW Alison turbine = 4380 HP --> domestic fuel oil INPUT RPM 14210 OUTPUT RPM 1500 Number of hours 600H of operation 10 KV cell (alternator output) Deutz 160 HP diesel (turbine launcher) 10 kW generator set – Deutz engine (Auxiliary power)

Allgaier vibrating sieve, Sieve diameter:: 470 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Elec:: 230/400 V , Engine: Motor Elektror , Dimensions (mm): 1100x700 H 1200, Powder discharge height (mm): 765, Electric:: 230/400 V , Powder outlet height (mm): 765

Type 501 KB Year of manufacture 1980 alternator RATED 3860KW alternator DUTY 3355KW Alison turbine = 4380 HP --> domestic fuel oil INPUT RPM 14210 OUTPUT RPM 1500 Number of hours 600H of operation 10 KV cell (alternator output) Deutz 160 HP diesel (turbine launcher) 10 kW generator set – Deutz engine (Auxiliary power)

General SKU397X1159 MakeAllgaier LocationBarneveld CEcheck TypeWS-CA-150 Main Features MaterialStainless steel Volume140 Ltr. Specified Features - Fluid bed dryer batch Fluidbeddryercheck With pan mounted on wheelscheck Capacity15—140 l. Pan sizesø 700 x 500 mm With sprayer(cleaning WIP system) Can be heated by steamcheck With electric heatingcheck With fan2x (Ex) Motor15kW 400 V (Ex) With dust filtercheck Filter surface6,6 m² MaterialStainless steel 1.4404, Stainless steel 1.4571 (316Ti) General No.348 Year of construction2010 With switchgear(as is) Total height± 3,5 m Extra information Max pressure: 1.2 bar Surface finish Inside: Electropolished, Ra ≤ 0.4 µm Outside: Ra ≤ 1.0 µm Temperatures Design temperature: 100°C Operating temperature: 90°CStarchGreen FridayBiotechnologyCatalysts & fillersFeed additivesBiopharmaceuticalOther pharmaceu ...

General SKU308T739 MakeAllgaier Werke TypeWS-GT-0,75 No.280 Year of construction2004 LocationBarneveld Main Features MaterialStainless steel Surface0.44 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surfaceapprox 0,44 m2 With dust filtercheck Heating unit (steam)check Max. temperature300 °C MaterialStainless steel, Stainless steel 1.4301 (304) General With switchgear(as is) CEcheck Extra information Extra SpecificationsFluidized Bed Spray Granulators from Allgaier can be used to produce solid and dust-free granules from liquid starting materials such as suspensions and solutions. The remaining dust and powders can be further processed into easily soluble instant products. The machine is particularly suitable for processing urea granules, yeast, gelatin granules, and water jars. Functionality:During granulation, the solids-contain ...

This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine.

TECO Office 600 All FUll time surge protection

Plasma Cutting Machine Manufacturer: Microstep Type: MasterCut-P 3001.20 Year of Make: 2014 Operating hours approx.: 7,024 Control: iMSNC Work surface: 3,000 x 2,000 mm 1 plasma torch power source Kjellberg HiFocus 280i neo with all-gas console Integration of the HiFocus 280i plasma source into the control system Remote maintenance access through TeamViewer 15 m hose package Without suction 1 x Asper Win Basic nesting software + autom. Nesting on the machine control All-throttle = allows you to change the throttle to improve the quality of the cut and Adapt the cutting speed to the material.

Horizontal flow-pack machine sold with:, a conveyor, stencil machine, an ink jet, Very little used, in excellent condition., All Wrapper RCN270 packaging machine from 2012, - Linear speed: up to 25 m/min, - Width of the bags: from 30 to 270 mm, - Length of bags: from 50 mm to infinity, - Product heights: up to 25 mm, - Production rate: up to 150 cycles/min per lane, - Diameter of the reels: 400 mm as standard, AVERY DENISON labeler type ALX 734LH:, - Printing speed: 50 to 400 mm/s, - Print width: 104 mm max, - Ribbon width: 20-140 mm, - Label production: Up to 400 labels, - Label width: 30 to 134 mm, - Label length: 25 to 225 mm, - Chuck diameter: 38.76,102 mm, - Roll diameter: 300 or 400 mm, DOMINO A320i Inkjet, Conveyor :, - Conveyor belt width: 100 mm, - Conveyor belt length: 2000 mm, - Dimensions: 2000x595 H 1240 mm, Elec:: 380 V / 4000 W , Link to the manufacturer: : all-wrap/fr/rcn ...

CONTROLS   CNC controls MOULD CLAMPING UNIT   locking force: 350 to   die opening stroke max.: 350 mm EJECTOR (TABLE EJECTOR)   stroke: 150 mm INJECTION UNIT   stroke of screw: 80 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 3700 mm   space requirements -front/back-: 1300 mm   total height: 2100 mm   total weight approx.: 2300 kg Features: - Includes pellet dryer: Labotek DDM 60 ALB 3 units available

Pneumatic press, pneumatic punch, multifunctional punch, punch, universal punch, punching machine, pneumatic hole punch -Manufacturer: All Mecanic, multifunctional punch -Type: 994.500-1 - Execution: pneumatically operated, with foot control -Punching tool: see photos -Dimensions: 400/270 / H370 mm -Weight: 28 kg

B&A REF: 9235 TON: 320 SCREW DIAMETER: 55MM SHOT WEIGHT: 434 STROKE VOLUME: 474CM3 INJECTION PRESSURE: 1650AR PLATEN SIZES: 1040 X 1040MM DBTB: 720 X 720MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 800MM MOULD OPENING STROKE: 600MM MAX DAYLIGHT: 1400MM EJECTOR STROKE: 250MM CONTROLS: SELOGICA TOUCH CORE PULLING: 1 AIR VALVES: 1 MOTOR: ALL SERVO DRIVES SCREW DRIVE: ELECTRIC

Centrifugal pump, water pump -Pump housing: Nirosta -Pump wheel: stainless steel -Max. Delivery rate: 80 m³/h -Max. H: 4 mWs -Motor power: 2.5 kW -Speed: 1415 rpm -Pipe connection inlet: DN125 -Pipe connection outlet: DN80 -Number: 1x pumps available -Price: per piece -Dimensions: -Weight: 125 kg

Petrol engine, hydrant key, hydrant wrench, underground hydrant key -mobile transmission: with gasoline engine -Petrol engine Manufacturer: Honda Type: GX -was used as: hydrant key -Gearbox speed: 1-30 rpm -Features: Digital display, revolution counter, forward/reverse rotation -Wavelength: 520 mm -Square drive: 40 x 40 mm -Dimensions: 1400/800/H1160 mm -Weight: 132 kg

Triple screw pump, centrifugal pump, high pressure pump, centrifugal pump, lubricating oil/oil pump, triple screw pump -Manufacturer: Allweiler, screw pump type SPF40R54U8.3-W20 with hose package -Flow rate: 3.4 l/min -Pressure: 3 bar -Motor: 0.7 kW / 1800 rpm -Hose package: length 1x 60 m / 1x 6 m -Dimensions: 1230/900/H960 mm -Weight: 160 kg

General SKU311X477 MakeEllerwerk LocationBarneveld CEcheck Type936H cGMP Main Features MaterialStainless steel Motor18.5 KW Inlet diameter50 mm Specified Features - Peeling centrifuge Peeler centrifugecheck Capacity96 l. Basket sizesø 900 x 400 mm Wall thickness13 mm Max. loading weight150 kg Motor18,5 kW, 380/400 volt, 1470 rpm Max. basket speed1600 rpm With scrapercheck With hydraulic unitcheck Motor0,75 kW 380 V 1390 rpm InletDN 80 Solids outletDN 150 Liquid outletDN 100 MaterialStainless steel 2.4605 (Alloy 59) General No.02.059 Year of construction2002 Mounted on foundation platecheck Floorspace2,37 x 1,85 m Total height2,90 m Weight7880 kg Extra information Application: Filtration (not sedimentation) Centrifugal factor at max speed: 1280 g Max loading (permissible drum load): 150 kg Filter area: 1.13 m² Max product temperature: +80 °C Min produc ...

BECKMAN COULTER Allegra X-12R Refrigerated Centrifuge with SX4750A Rotor Reference : X-12R Max. Centrifuge Speed: 10200 RPM Capacity: 4 x 750mL (4L) Refrigerated = -10°C to 40°C Max. FCR: 11400 x G Voltage: 230V / 50/60Hz Net Weight: 121kg Autonomy: 9h. 59 min. or continuous Dimensions: 77 × 63 × 36 cm BECKMAN SX4750A Oscillating Bucket Rotor 4 x 750ml carrycots with lids Max. Speed: 4750 rpm Max. FCR: 5250 x G 1 set of 4 349946 adapters for 62 mm diameter polypropylene bottle (Designed for a 250 ml flat bottom bottle) 1 set of 2 adapters 349950 for 14 tubes of 15ml 1 set of 4 multi-well plate holders Year of Manufacture: 2009

Key data: 1000 kN

ARBURG ALLROUNDER SELECTA 470 S 1000 – 675 (Year 2001) Serial number: 187132 – Machine no. 8 Clamping force: 1000 kN EUROMAP: 1000-675. Operating hours in automatic mode: 32,312 h. Machine cycles: 3,192,800. Hydraulic pump operating hours: 42,753 h. Screw diameter: 55 mm. Distance between columns: 470 x 470 mm. Platens: 637 x 637 mm. Maximum mold height: 750 mm. Ejector force: 40 kN. Ejector stroke: 175 mm. Injection volume: 675 cm³. Operating voltage: 400 V – 3 – 50 Hz. Heating: 14.9 kW. P ump motor: 1 x 22.00 kW. Total installed power: 50 kW. Dimensions: 4180 x 1645 x 2140 mm (height). Weight: 5400 kg.

Key data: 500 kN

ARBURG ALLROUNDER CENTEX 320 C 500 – 250 (Year 2002) Serial number: 188161 – Machine no. 30 Clamping force: 500 kN EUROMAP: 500-250. Operating hours in automatic mode: 38,560 h. Hydraulic pump operating hours: 48,759 h. Cycles: 6,502,482. Spindle diameter: 40 mm. Distance between columns: 320 x 320 mm. Platen dimensions: 446 x 446 mm. Injection unit (EUROMAP): 250. Approximate injection volume: 106 m³. Injection weight (PS): 97 g. Operating voltage: 400 V – 3 – 50 Hz. Heating: 6.5 kW. Pump motor: 1 x 15.00 kW. Total power: 21.5 kW. Weight: 2,330 kg.

ALLROUNDER SELECTA 470 S 1000 injection molding machine. (2001) Registration: 187133 – Machine 9. Clamping force: 1000 kN. EUROMAP 1000-675. Operating hours in automatic mode: 32,311 h. Cycles: 3,192,790. Hydraulic pump operating hours: 41,853 h. Injection unit: 675. Screw diameter: 55 mm. Distance between columns: 470 x 470 mm. Platens: 637 x 637 mm. Maximum mold height: 750 mm. Ejector force: 40 kN. Ejector stroke: 175 mm. Injection volume: 675 cm³. Operating voltage: 400 V – 3 – 50 Hz. Heating: 14.9 kW. Pump motor: 1 x 22.00 kW. Total installed power: 50 kW. Dimensions: 4180 x 1645 x h. 2140 mm. Weight: 5400 kg.

This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details.

Allrounder Lab Reactor Brand: IKA Usable volume: 500 to 2,000 ml Attainable vacuum: 25 mbar Viscosity max.: 100,000 mPas The system consists of: - Stand system with safety switch - High torque stirrer - High speed homogenizer/ disperser - Vacuum chamber - Temperature controller Currency: MYR PIC: - Dr. Wong Sze Ting (013 939 6151/ wongsttopglove.com.my) - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my)

Industrial PC with 15.6" touch panel Equipment new, packed, in original box When buying more than three pieces of this product, a 25% discount

Allen Bradley Guard Master 450L-E4FL1800 - safety barrier Brand: Allen Bradley Guardmaster Product type: Light curtain Series: 450L-E Beam Resolution: 14mm Component Type: Transceiver Protection Type: Type 4 Standards/Approvals: TUV, IEC Protection height: 1.8m Maximum protective width: 9m Maximum supply voltage: 24V Minimum Scanning Distance: 0.5m Maximum Scanning Distance: 9m Height: 1.8m Length: 30mm Width: 30 mm Maximum response time: 20ms Connector Type: Screw

General SKU312X492 MakeALLGAIER PROCESS TECHNOLOGY GmbH TypeWS-R-V-T-2.80-0.50-0.30 No.380 Year of construction2013 LocationBarneveld Main Features MaterialStainless steel Motor11 KW Surface0.75 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryerContinuous operation, pressure/suction mode Surface0,75 m² Bed sizes300 x 2500 mm Product inletø 150 Product outletø 200 Number of sections:3 Air inlet2x ø 400: 2x ø 80 (warm air blending) Air outlet3x ø 250 Vibro motorcheck Motor11 kW (400 V 1475/477 rpm) With variable speed drivecheck With fancheck Motorcheck Capacity500 kg/h wet product With cyclonecheck Heating unit (oil)(Thermal oil: Heat Exchanger) Max. temperatureApprox. 170 °C: inlet air MaterialStainless steel 1.4301 (304) General Mounted on mild steel framecheck Floorspace3,9 x 2,25 m Total height2,9 m CEcheck Extra inf ...

General SKU244U279 MakeAllgaier-Werle GmbH LocationBarneveld TypeTSM 2000/2 Main Features MaterialMild steel/Stainless steel Surface2.6 m2 Sizes diameter1850 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface2.6 m² Number of sieve decks:2 (not included) Sieve sizesDia: 1850 mm With covercheck InletDia: 300 mm OutletDia: 190 mm Drive excentercheck Motor2,2 kW (380 V, 1410 rpm) With brush cleaningcheck Tumbler screening machines MaterialMild steel, Stainless steel 1.4301 (304) General No.2450 Year of construction1982 Floor space2,4x2,1 m Total height1,65 m Weight1000 kg Extra Specifications- No sieve deck includedStarchOther chemicalRubberPlastic & polymersFeed additivesPaper & otherOther pharmaceuticsOrganicsE-waste & metalSugarAnimal feedOther feedSolid pharmaceuticsPlastic & rubberMinerals & inorganicGeneric medicinesPowdered foodsConsu ...

Vibrating Screening Machine Manufacturer: Allgaier Type D 600 Masch.-Nr. 597 Screen diameter: 600 mm

Equipment: Insulation, Overpressure,Manufacturer: ABAB General Tank and Apparatus Construction,Condition: Used,Volume: 10,000,Max. Overpressure: 5.00,Max. permissible Operating temperature : 20,Design: upright,Stand shape: feet height adjustable,Number of feet: 4,Insulation: available,Insulating sheath: hermetically welded,Material insulating sheath: Stainless steel,Diameter inside: 1,800,Diameter outside: 2,000,Cylindrical height: 4,000,Total height: 5,200,Wall thickness floors: 7,Wall thickness cylinder: 5,Technical documents: Drawing, TÜV papers,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Level indicator

Mono pump, metering pump, high-pressure pump, water pump, screw pump, progressive cavity pump, hopper pump, eccentric spindle pump -Electric motor: Nord 3.0 kW -Transmission: Nord SK25-100LA/4 TF -Speed: 105 rpm -Pipe connection diameter: DN 80 -Quantity: 3 eccentric screw pumps available -Price: per piece -Dimensions: 1810/200/H300 mm -Weight: 107 kg/piece

Manufacturer: Arburg Year of manufacture: 2008 Model: ALLROUNDER 370 S 600-290 Type of machine: Wax spraying machine Condition: already dismantled, ready for collection Find more here - .ucymachines/ Contact us at - sales@ucymachines

Open stainless steel tank with a lid., Additional title: Open stainless steel vessel, Volume: 14500 l, Length: 2300 mm, Width: 2300 mm, Height: 4000 mm, Material: Stainless steel 1.4301, Position: Vertical, Base construction: 3 x feet, Features: Lid; access ladder; float valve

Stainless steel sieve insert for ultrasonic fine screening, mesh size: 0.032 mm, wire gauge: 0.025 mm, material(s): VA 1.4301 / 1.4401. Suitable for VTS 950 screening machines, among others.

Manufacturer: ARBURG Model: ALLROUNDER 370 C 800-250 Type of machine: Injection molding machine Year of manufacture: January 2005 Weight: 3180 kg Clamping force: 800 kN Operating voltage: 400V, 3-phase, 50Hz Heating: 6.5 kW Pump motor: 1 x 15.00 kW Total connected load: 21.5 kW with Multilift handling for inserts Find more here - .ucymachines/ Contact us at - sales@ucymachines

Stainless steel sieve insert for ultrasonic fine screening, mesh size: 0.036 mm, wire thickness: 0.028 mm, material(s): VA 1.4301 / 1.4401. Suitable for VTS 950 screening machines, among others.

1-deck stainless steel vibratory tumbler screen with a screening area of 0.7 m² and a screen diameter of 950 mm. Incl. 1 piece sieve insert (without covering), incl. base frame and drive: 1.1 kW, 230/400 volts, 1,300 rpm. Suitable for dry screening of almost all bulk materials in the fine, medium and coarse grain range as well as for wet screening.

Three similar Arburg injection molding machines are available. 1) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2010, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 91917h, weight: approx. 9800kg. 2) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 82736h, weight: approx. 9800kg. 3) Arburg ALLROUNDER 570 A 2000-800, year of manufacture: 2011, clamping force: 2000kN, distance between tie bars: 570mm/570mm, pressure: 575bar, control system: Selogica direct 4.090, operating hours: 90722h, weight: approx. 9800kg. Documentation available. An on-site inspection is possible.

Description Item # 9276 - SIEVE Manufactured by ALLGAIR WERKE (Germany) Model TMS-600/2 ATS600 600mms diameter Includes : 3 sieves mesh width 3 mm 2 sieves mesh width 8 mm 2 sieves mesh width 5 mm 2 sieves mesh width 4 mm 2 sieves mesh width 2 mm 1 sieve mesh width 1.5 mm

Key data: 160 mm

Machine vise Saurer-Allma Allmatic 160 - 360° rotatable Made in Germany. Jaw width 160 mm. Clamping range up to 302 mm. Weight 58 kg.

feed pressure: . bar coolant capacity: . l Expansion Range: . mm Paper belt filter Allweiler Filter flange 800x500 Tank 1400x800x40 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ARBURG ALLROUNDER 720S 3200-2100 injection moulding machine was built in 2008 in Germany by ARBURG GmbH + Co KG. The machine is designed for the efficient mass production of plastic components used across a wide range of industries. The production process utilises the injection moulding method, which involves injecting plasticised plastic under high pressure into a closed mould, where the material cools and takes on the mould’s shape. A 60 mm diameter screw and a precision mould clamping system with a clamping force of 320 tonnes ensure the process runs smoothly, guaranteeing high repeatability and quality of the parts produced. The ARBURG ALLROUNDER 720S 3200-2100 is offered with a comprehensive range of equipment that increases the level of automation of the production process. All process parameters are programmed in the intuitive SELOGICA control system, which ensures convenient ...

clamping force: 600 kN injection volume: 144 cm³ screw diameter: 35 mm platen size: 570 x 570 mm closing stroke: 500 mm Condition: used Specification: Horizontal injection moulding machine clamping unit: - Clamping force max.: 600 kN - clamping platens: 570 x 570 mm - clear column distance: 370 x 370 mm - Distance between the mould mounting platens: 750 mm - Mould installation height: 250 mm - Opening stroke max.: 500 mm - Ejector travel hyd. Ejector stroke: 175 mm - Ejector force max.: 40 kN Injection unit: - Screw diameter: 35 mm - Screw length: 20D - Screw stroke max.: 150 mm - Max. dosing volume: 144 cm³ - Moulded part weight: 121 g - Injection pressure: 1,820 bar - Injection flow max.: 154 cm³/s - Screw peripheral speed: 57 m/min - Screw torque max.: 440 Nm - Barrel and nozzle heating: 1600 +  ...

ALLEN MU-90 ist ein Schraubstock, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsbereiche: Presskraft 20–55 kN; Backenbreite 175 mm; Abmessungen: Länge 540 mm, Breite 175 mm, Höhe 125 mm. Hauptspezifikationen: Kraftbereich 20–55 kN und genannte Abmessungen. Ermöglicht enge Toleranzen; typischer Einsatz in Automobilindustrie, Uhrenherstellung, Maschinenbau, Luftfahrt und Medizin. Technische Daten ohne Gewähr

ALLEN Ø 350 ist ein Rundtisch, konzipiert für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitskapazität: Stellraum/Arbeitsmaß Länge 600 mm, Breite 500 mm, Höhe 110 mm. Wichtige technische Daten: Abmessungen L 600 × B 500 × H 110 mm. Ermöglicht enge Toleranzen und eignet sich für Branchen wie Automobil, Uhrenindustrie, Werkzeugmaschinenbau, Luft- und Raumfahrt und Medizintechnik. Technische Daten ohne Gewähr