94 offers

Category: 841: paper converting: carton gluers
New in: 1998
Price: request quote
Location: Land-de DE 75433 Maulbronn, Maybachstr. 9
Seller: Kohler Verpackungstechnik

1150 mm, min. 45 mm, longitudinal seam, folding floor, double edge, 4 point bonding, electronic top glue piece with 4 applicator heads, washers under Glue factory left, electronic overtaking folding of servo feeder with vacuum & vibrator, pre-breaker right and left, kicker, counter, Digital position indicators, additional Mitteltransport in folding, additional Mitteltransport in the primary crusher, motorized Threading station, vacuum in folding, Jagenberg DBS01 control, motorized size setting, safety light curtains right & left. Alignment on the press line, pneumatic, switch-mode, long press band. Machine overhaul in 2016.

Category: 1107: other energy machinery
New in: 1999
Price: 3.950 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Category: 402: packing machines
New in: 1996
Price: 12.000 €
Location: Land-de DE Production place
Seller: LM Dairy Consulting

A 4 106.6 1 SEMA crate palletizer machine Capacity is: until to 1.200 crates per hour Manufacturer is Comp. SEMA Manufacturer year is 1997 with a mobile trolley with a crate full control from Krones with approx. 7 m inlet conveyor for crates with a crate pre alignment to compile the palletize layer with an empty pallet magazine for Euro pallets with a single empty pallet transport system with full pallet outlet roller conveyor, that fork lift stacker can pick up the full pallet. with a electronic cabinet and Siemens control system. Price up standing place: 12.000,00 Euro

Category: 1009: excavators
New in: used
Price: 450 €
Location: Land-de DE 26215 Wiefelstede, Germany
Seller: Theodor Eberlei GmbH & Co.KG

Laser alignment device, leveling device, construction laser, cross laser, laser Laser with accessories -3x transport case Dimensions 600/400 / H190 mm 25 kg Dimensions 400/320 / H170 mm 8.7 kg Dimensions 180/160 / H135 mm 3.2 kg -Weight 36.9 kg

Category: 409: other packaging machinery
New in: 1990
Price: request quote
Location: Land-de DE 50933 Köln, Eupener Str. 135-137
Seller: PP LION GMBH

Martin 924, 1990 Ref.Nr: 2595 Manufacturer Martin Model 924 year built: 1990 speed: 18000 sh/h Max sheet size: 920 x 2,450 mm availability: 03/2019 condition: good price: on technical request spezification: â?¢ PreFeeder: Roda FB 38 retrofitted with Siemens PLC control, built-in in 1990 â?¢ Vacuum feeder: SUN, built in 2011 â?¢ Printing: MARTIN RapidShare set 2 colors, built in 1990 â?¢ Slotter: MARTIN, built in 1990 â?¢ Rotary: MARTIN, built in 1990 â?¢ Folding: MARTIN, built in 1990 â?¢ Glue application / monitoring: HHS, XTS2 built in 2011 â?¢ Trucks: Rapidex, built in 1990 â?¢ Coun ...

Category: 209: other wood working machines
New in: 2002
Price: request quote
Location: Land-be BE
Seller: Vebim

Calibrating and/or squaring line with edge banding doing panels all round in 2 passes Panel width min/max: 220 / 1000 mm Panel length min/max: 320 / 3200 mm Edges max. 3 x 45 mm. Fixed side at the left Siemens SMSPC controls Line set up: Vacuum feeder Turning station length to cross Double end tenoner Turning station length to cross Double squaring and edgebanding Turning station cross to length Vacuum stacker 1.01 FEEDER, type CAR MS 2000 2-lane 1.02 TURNING STATION LENGTH-CROSS, type TR 100 90° turning of workpieces by means of 2 clamping discs 1.03 DOUBLE END TENONER, type SI_V 112 - schéma 4500 Squaring panels or calibrating/shaping solid wood panels Panel feed by chains, chain width 8 ...

Category: 201: saws
New in: 1995
Price: request quote
Location: Land-de DE 96317 Kronach
Seller: voelkel-hightech

Automatic longitudinal circular saws - CE run - length 4200 mm, length of the machine 5700 mm, cutting width 450 mm, height 170 mm, motor 17.5 kW - 400 v, dust suction channel 150 mm diameter, control panel with auto. Contactor control, programmable controller, PLC - free laser alignment beam device

Category: 0:
New in: used
Price: request quote
Location: Wiener Neudorf
Seller: HESSE+CO GesmbH

sheet width:1250 mm plate length:2500 mm plate thickness:6 mm total power requirement:15 kW weight of the machine ca.:12960 kg dimensions of the machine ca.:7.360 x 6.800 x 2.310 mm punching force: 20 to working area: 2.500+R x 1.250 mm X-axis movement: 2.500+R mm (repositioning) Y-axis movement: 1.250 mm speed of Y-axis: 80 m/min speed of X-axis: 116 m/min speed combined X+Y: 140 m/min max. strokes (in 1 mm steps, 1 mm thickness): 1.200 1/min max. strokes (in 25 mm steps, 1 mm thickness): 400 1/min max. marking speed: 1.800 1/min. main cylinder stroke: 40 mm max. punching stroke: 25 mm max. cutting thickness with fix tool station steel: 6 mm max. cutting thickness with fix tool station stai ...

Category: 1300: other machines and plants
New in: used
Price: request quote
Location: Land-de DE 92714 Pleystein, Berglerscheife 8
Seller: Mirrotech Glas & Spiegel GmbH

Data: -Year of construction: 2010 -with automatic alignment & centering system -Glass thickness: 3-25 mm -min. opening of the machine: 135 mm -Grinding speed: 0.5-8 m / min -Power: 45 kW -Working pressure: 7 bar -Power: 400 V -2 pages edge grinding machine with jew. 10 grinding heads per page (3 diamond discs, 2 hem diamond discs, 2 hem polishing discs, 3 polishing discs) -Working table in the moveable width -maximum working width: 2000 mm -with a control display Schneider Electric Magelis -Water tank with pump -with low-E version -Workpiece weight: 600 kg -Machine weight: 7000 kg New price: â?¬130.000 Retail price: VB

Category: 202: milling machines
New in: used
Price: request quote
Location: Land-de Germany, 32683 Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

CNC boring- and milling machine\r\nBrand: Vitap\r\nType: Point K2 TOP 2.0\r\nNew machine\r\n\r\nWith throughfeed panel boring from the bottom and automatic panel return to the operator\r\n\r\nThree controlled axes:\r\nX Axis - Panel movement seamlessly by DDT( Double Dynamic Transport) with boosted brushless motor\r\nY Axis - Boring head movement\r\nZ Axis - Panel boring\r\n\r\n- Double 0 panel reference: New generation laser to detect the beginning and the end of the piece. The program can readjust the drilling at the bottom of the piece to have a perfect flush between the vertical and horizontal pieces.\r\nThe laser is composed by a transmitter and receiver to avoid any error caused by dar ...

Category: 1300: other machines and plants
New in: used
Price: request quote
Location: Land-de DE 92714 Pleystein, Berglerscheife 8
Seller: Mirrotech Glas & Spiegel GmbH

The glass drill GBMV 2-900-10 vertical is a robust machine with large work area and manual confirmation of both spindles. The boring heads are firmly arranged in good working height, while the glass by means of a movable lift frame is positioned automatically after digital input of set value in vertical direction. The glass on smooth rolling by hand using scaled attacks is positioned in horizontal direction. Electrically adjustable lift frame, digital preselection of the vertical hole values, two drill heads with manually confirmed feed, presser with gas pressure spring, coolant tray, drilling depth stop, thermal motor protection, undervoltage release, Junction box for cooling system, conn ...

Category: 203: planing machines
New in: 2012
Price: request quote
Location: ab Standort
Seller: Gebr. Engelfried oHG

Number of spindles: 8 St. Working width: 260 mm Working height: 160 mm Length of the planing table: 2000 mm Feed motor: 7 kW Feed speed: 5-30 m/min. Dimensions (L/W/H): 5700x2100x1740 mm weight of the machine ca.: 5000 kg Control: Weinig PowerCom Weinig Powermat 1000 CNC, year 2012 ------------------------------- Executive Summary: ------------------------------- 8 spindles HSK / powerlock large PowerCom controller Grooved Axial and axial axes CNC controlled Detailed description: ------------------------------- Technical specifications: ------------------------------- Working width max. 260 mm Working height max. 160 mm 1. tool holder ------------------------------- First lower tool holder E ...

Category: 102: lathes
New in: 2002
Price: request quote
Location: Land-de DE
Seller: Wolfgang Finken GmbH

GENERAL Project No.: 904901 Number: 1 PCs. Manufacturer: EMCO Type: HYPERTURN 665 MCplus Control: Siemens 840 D Year of construction: 2002 State of preservation: second-hand machine DESCRIPTION TURNING Maximum turning diameter 430 mm Maximum turning length 744 mm Maximum swing over bed 600 mm Max speed main spindle 5000 1/min Maximum performance main spindle in ED 10-40 / 100% 29 kW Maximum torque of main spindle in ED 10-40 / 100% 250 NM Main spindle spindle passage 65 mm Axes on the main spindle unit C Hollow clamping cylinder to the main spindle Maximum speed 5000 1/min spindle Maximum performance counter spindle in ED 10-40 / 100% 29 kW Max torque spindle in  ...

Category: 205: boring mills, machining centers
New in: 2018
Price: used machinery auction RESALE 1.690 €
Location: Land-de DE Germany, 77716 Haslach i.K.
Seller: Surplex GmbH

Weight approx.: 10 kg Dimensions (l x w x h) approx.: 600x400x600 mm sawing- and snipping unit: ja / yes sawing- and drilling unit: ja / yes sawing- and drilling unit with 2 spindle: ja / yes lock case trimming unit: ja / yes routing unit: ja / yes Description: BENZ Type of aggregate: Lock recess trimming aggregate type FORTE Product Line: Classic Line (grease lubrication) Tool outlet: 1x Whistle Notch Ø20 mm (or Ø16 mm with reducing sleeve) with an additional saw blade alignment Ø30 mm (pitch circle diam. 52 mm) and 1x collet chuck ER16A (clamping range 1-10 mm) on the back The unit can be delivered with different machine connections . After the purchase please let us know which machine ...

Category: 1403: other storage equipment
New in: 2010
Price: 209.500 €
Location: Land-de DE 65719 Hofheim / Wallau, Wiesbadener Str. 6
Seller: Alexander von Westernhagen

Kasto cassette long goods warehouse used for up to 6, 50 m long goods, approximately 624 cassettes, 2to / cassette, including warehouse management and relative --: Price from site: â?¬209.500.-(net), plus dismantling etc.! Manufacturer: Kasto Type: UNITOP 3.0 Year of construction: 2010 Complex consists of 19 rack frame units (17 double-sided, 2 sided) External dimensions of the system: Length: approx. 42, 90 m Depth of the rack system: approx. 9, 50 m Depth incl. out-feed station: approx. 16, 50 m Shelf height: approx. 7, 40 m OK RBG height: approx. 9, 05 m maximum storage: 1. 872to Cassette: Type 1 Usable dimensions: Length: 6.500 mm Width: 520mm Bela de hei ...

Category: 109: other metal working machines
New in: 2008
Price: request quote
Location: Land-de DE Backnang
Seller: I-H&S GmbH

Technical Data item number: LMZ-1068 Manufacturer: TRUMPF Type: LiftMaster Store Linear Year: 2008 Length: Width: Height: Weight: \n \n Basic configuration LiftMaster Store Linear \n \n Basic system for loading and unloading, gantry with two gantry stations, vacuum frame, horizontal axis, zipper prongs, guide frame and pallet pull-out incl. a standard loading height check (90mm), direct connection to storage system TruStore or UL, safety equipment and Start pedestal. \n \n Additional options LiftMaser Store Linear \n \n Extended sort (basis for parts separation as from 1000 x 600 mm) \n Extended parts removal from 600 x 600 mm: Additional ...

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Land-pl PL
Seller: CNC Management Ltd

Make: Tos Model: FRP 250 FSE / A2 CNC Portal Mill Condition: Used Machine type: Mill Location of machine: Poland Machine Details Control: Heidenhain TNC 530, Portal milling machine with fixed stand, with slide bar and sliding table. Technical parameters of the machine: TRAVELS: X Axis travel (table): 2250 mm, Y Axis stroke: 3800 mm, Vertical alignment of the cross - member in the W axis, Proportion between stands: 2500 mm, WORKSPACE: Headstock with preparation for exchangeable spindle heads, Spindle speed: 500 rpm, Engine power: 100 kW, Torque: 4000 Nm, Spindle taper: ISO 60, Work table: CER 2000 x 2000 mm, Stroke in linear axis: 2250 mm, Width: 2000 mm, Length: 200 ...

Category: 104: grinding machines
New in: 1981
Price: request quote
Location: Stockstadt a. Rhein
Seller: GK Werkzeugmaschinen GmbH

grinding length:500 mm grinding width:250 mm workpiece height:375 mm table clamping surface LxW:760x200 mm :500x250 mm distance between table/spindle:525 mm :2-28 m/min :1,2 m/min :1-30 mm/Hub :0,02 mm vertical feed autom.:0,002-0,06 mm :0,15 m/min :0,02 mm :0,001 mm :1400/2800 1/min diameter / bore of grinding wheel:300/76,2 mm grinding wheel wide min./max.:25/30 mm :3,7/4,5 kW hydraulic pump:1,5 kW :0,1 kW vertical feed motor:1,7 kW wet grinding attachment:0,15 kW :1600 kg :1,9x1,5x1,95 m Used surface grinding machine, Make ELB, HAHN & KOLB, type ORION 525 ND, built in 1981, Machine no .: 17650 (49564) Machine with automatic infeed in all 3 axes. Machine cleaned thoroughly and by qualified ...

Category: 841: paper converting: carton gluers
New in: 1997
Price: request quote
Location: 75433 Maulbronn, Maybachstr. 9
Seller: Kohler Verpackungstechnik

Max. 1100 mm, at least 126 mm, longitudinal seam, folding floor, double edge, 4 + 6 point bonding, electronic glue Oberwerk ERO 4 applicator heads, high pressure washers under Glue factory left, electronic overtaking folding with servos, vibrator to the investors, dental teaching to the investors, primary Crusher right and left, kicker, meter, motorized lower transfer station, cutting alignment at the transfer station, cutting alignment on the press line, fully automatic format adjustment, pneumatic, switched mode press band. Overhaul 2018: cleaned, tested, painted and equipped with new feeder and conveyor belts, and new press tapes.

Category: 205: boring mills, machining centers
New in: 2018
Price: used machinery auction RESALE 1.450 €
Location: Land-de DE Germany, 77716 Haslach i.K.
Seller: Surplex GmbH

Weight approx.: 10 kg Dimensions (l x w x h) approx.: 600x400x600 mm sawing- and snipping unit: ja / yes routing unit: ja / yes Description: BENZ Einfachwinkelkopf MONO R Aggregate Type of aggregate: Single sided angle head with reduced RPM type MONO R Product Line: Classic Line (grease lubrication) Tool outlet: 1x saw blade alignment Ø30 mm (fixation with flange by 2 pins Ø6 mm on pitch diameter 42 mm or by four M5-screws on pitch diameter 45/52 mm without using the flange) Weight 5.5 kg max. drive torque M2 25 Nm max. drive speed n2 8000 1/min Transmission ratio (n1:n2) 1:0.8 The unit can be delivered with different machine connections . After the purchase please let us know which machi ...

Category: 401: filling machines
New in: 2007
Price: request quote
Location: Land-fi FI
Seller: JADE Trading OY

Complete PET Bottle Filling Line 5.500 bph This complete line has been built in 2006 and 2007 – installed in 2007 and has been taken out of service in 2016. The line has filling non carbonated soft drinks in PET bottles cap PCO 28 mm. Frequent maintenance is still taking place (greasing and startup / test runs). It is completely installed and in excellent condition. Dry end of the line is being used for repacking purpose. Line has run 3 different bottle formats (biggest 2.0 liters). Spare parts (limited) are available, all documentation is available. The line is in good condition, installed and powered and can be tested. Make: Various, see details Built: 2006/2007 – Installed 2007 ...

Category: 211: veneer machines
New in: 2007
Price: request quote
Location: Land-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Fischer Rückle, Type: AFD, Year: 2007, Control: Programm, Double knife: yes, Cutting lenght mm: 4200, Working hight mm: 40, Alignment light: yes, Digital readout lineal guide: yes, Motorische Anschlagverstellung mm: automatisch, Hydraulically driven kinfe beam: yes, Pressure beam: yes, Wight approx. kg: 10000, machine ready for demonstration: yes, Year :2007

Category: 102: lathes
New in: 2007
Price: request quote
Location: Land-cz CZ
Seller: Fermat

Producer . Spinner Year manufacture/Year overhaul . 2007 Control system Siemens . Sinumerik 840 D Turn table diameter . 400 mm Turning lenght . 650 mm Sloping bed Y axis Travel Y-axis . +50/-40 mm Counterspindle Spindle bore . 52 mm Travel X-axis . 275 mm Travel Z-axis . 700 mm Spindle speed . 0 - 5000 /min. Number of tool positions (driven) . 16(16) Swing over bed . 600 mm Machine dimensions l x w x h . 2500x1600x2000 mm Machine weight . 5000 kg Turret head Machine after middle repair: - After the headstock restoration, - After X axis repairs - ball screws and bearings - After Y axis repairs - ball screws and bearings - repair axis Z2 - ball screw and bearings - ...

Category: 211: veneer machines
New in: 2006
Price: request quote
Location: Land-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Fischer Rückle, Type: AFECO-2800, Year: 2006, Double knife: no, Alignment laser: yes, Cutting lenght mm: 2800, Working hight mm: 3,5, Wight approx. kg: 3100, FREE TEXT: 7kW, Year :2006

Category: 403: labeling machines
New in: 2005
Price: request quote
Location: Land-fi FI
Seller: JADE Trading OY

Wrap-around Labeling Machine Krones Canmatic 960-28 52800 bph This machine was installed in 2005 and it is still running and available in September 2016. Total running hours today being around 40 000. The labeler is currently working with 0.5, 0.6 and 1.5 liter PET bottles with pre-cut wrap-around polypropylene labels. Label material is polypropylene which was attached with two stripes of hot glue on both end of the label. Labeler has one precut label feeding station and two hot glue stations and 28 container stations. Container rotating is made with teethed plastic belt. Technical data Machine manufacturer: Krones AG Manufacturer's type: Canmatic 960 - 28 Year of manufacturing: 200 ...

Category: 211: veneer machines
New in: 1980
Price: request quote
Location: Land-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Hymmen , Type: AS 2800, Year: ca.1980, Control: hand, Longitudinal cutting guillotine: yes, Cutting lenght mm: 2800, Strip width max mm: 850, Working hight mm: 30, Alignment light: yes, Digital readout lineal guide: yes, Motor-driven kinfe beam: yes, Motorized stop adjustment mm: yes, Pressure beam: yes, Wight approx. kg: 2500, Year :ca.1980

Category: 201: saws
New in: used
Price: request quote
Location: Land-DE Germany, 32683 Barntrup
Seller: GROMAR Mariola Groyecki

Machine no. 26317 Cutting width (width) 650 mm Chain width 680 mm Total - band-width cutting height with pressure Board 120 mm cutting height without pressure Board 130 mm Workpiece length of min 650 mm Blade - diameter of 400 mm Blade bore 80 mm Saw shaft speed 3900 RPM Motor with motor brake 110 kW Laser - alignment lights 4 St Betriebsdrück 6 bar Feed motor frequency controlled, continuously 3 kW; 5-50 m / min Operating voltage 400V/50 Hz Electromotive printing plant height adjustment electromotive saw wave height adjustment check fuse weight 5300 kg with control cabinet Site 32683 Barntrup (errors and omissions in the technical data as well as intermediate sales reserved)  ...

Category: 211: veneer machines
New in: 1968
Price: request quote
Location: Land-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Josting , Type: EFS, Year: 1968, Control: hand, Longitudinal cutting guillotine: yes, Pressbalkenöffung mm: 60, Cutting lenght mm: 2800, Schnittbreite min-max mm: 500, Working hight mm: 30, Alignment light: yes, Digital readout lineal guide: yes, Motor-driven kinfe beam: yes, Motorized stop adjustment mm: yes, Knife drive: Elektro, Year :1968

Category: 832: post press: folders
New in: used
Price: request quote
Location: Land-de Germany, 90411 Nürnberg
Seller: F1-TRADE GmbH

2. Folding unit MBO T800-2-68/4 The mobile cross carrier ET 46 meet various application purposes. Since ET 46 can be swivelled by 180 ° it is suitable for both left hand and right hand lay. The alignment ruler of ET 46 is equipped with a ball rail for standard products; for thick products conical rollers are recommended which are optionally available. In combination with a mobile knife folding unit, cross carriers are applied on combi folding machines to produce a parallel fold to the cross and three fold or a double gate fold. Following a saddle stitcher it is possible to produce a parallel fold to the back. The combination of a cross carrier, rotary feeder and mobile knife folding ...

Category: 201: saws
New in: 1998
Price: request quote
Location: Land-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Centauro, Year: 1998, Type: SLG 8000, Cutting lenght mm: 7200, Working hight mm: 120, Exess End of saw blade mm: 135, Saw blade diameter mm: 450, Main engine kW: ca.10, Feeding system: automatisch, Feeding speed max m/min: 40, Alignment light: yes, Compressed air bar: 6, Wight approx. kg: ca.3000, Year :1998

Category: 101: boring mills and machining centers
New in: 1958
Price: request quote
Location: Rotthalmünster
Seller: Maschinen Stumpf GmbH

Wörner series drilling machine 4 units in circular arc alignment Built in 1958 MK2 spindle - speed change by Keilreinemscheibenwechsel Shaped casting table - drilling units height adjustable max wide table/spindle: approx. 500 mm - and rotatable with clamp. Drilling units throat depth: 280 mm Coolant system on each drilling unit; 1 x Unit TIBO 13 with Albrecht Chuck 0-13 mm left/right rotation Stroke: 0-100 mm with drill depth - fine adjustment screw Rpm: 560-3500 RPM motor 0.55 kw 50 Hz 380V 3 x units UNIVA 16 MK 2 recording left/right rotation speed: 540-3600 RPM (gear reduction speed unit is missing) Engine power: 0.55 kw 50 Hz 380V -of which a unit of UNIVA with auto ...

Category: 211: veneer machines
New in: used
Price: request quote
Location: Land-de Germany, 32469 Petershagen
Seller: Bödeker Holzbearbeitungsmaschinen GmbH

Manufacturer: Josting , Type: QFS 800, Year: ca.90, Cross cutting guillotine: yes, Cutting lenght mm: 2800, Strip width max mm: 800, Alignment light: yes, Motor-driven kinfe beam: yes, Pressure beam: yes, Required space L x W x H mm: 5000 X 1200 X1600, Wight approx. kg: 2000, FREE TEXT: mit Automascher Längenerkennung über Luminizenkamera/über Kreidestriche, Year :ca.90

Category: 402: packing machines
New in: 2006
Price: 4.200 €
Location: Land-ro RO Bucharest
Seller: Kuhn & Partner Romania SRL

Description Brand Polaris Model Vac Duet 100 ID 7148 Status Active Price 4.200 € + VAT Year of manufacture 2006 Location Bucure?ti, Romania Automatic tray sealing line for food, Polaris Vac Duet 100 manufactured in 2006. The line contains: the sealing machine; mold set 325 x 265 mm; mold set 265 x 180 mm; mold detecting photo-cell; gas tank; feeding conveyor belt (1 meter); output conveyor belt module (1 meter); tray alignment system; own weight: 950 kg. Needs a three-phase power supply, energy consumption: 12,65 Kw. Vacuum pump capacity: 100 m3. Needs detailed inspection. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-74 ...

Category: 104: grinding machines
New in: 1982
Price: request quote
Location: Stockstadt a. Rhein
Seller: GK Werkzeugmaschinen GmbH

grinding length:650 mm grinding width:375 mm grinding height:375 mm Clamping area:900x300 mm grinding spindle drive:3,7/4,5 kW table speeds:2-28 m/min autom. cross feed adjustable:1-60 mm/Hub vertical feed autom.:0,002-0,06 mm vertical rapid traverse:0,15 m/min grinding wheel diameter:300 mm grinding wheel hole diameter:76,2 mm grinding wheel width:50 mm hydraulic pump:1,5 kW cross feed motor:0,3 kW vertical feed motor:1,7 kW weight of the machine ca.:2800 kg dimension (LxWxH) ca.:2800x1900x2400 mm Used / overhauled surface grinding machine, Make ELB, type HK ORION 635 NC-K, machine no. 18.289.0482. Automatic notification in all 3 axes. Equipped with NC-K controller, controlled downfeed (Y- ...

Category: 821: pre press: imagesetter and CTP
New in: used
Price: request quote
Location: Land-de Germany, 42653 Solingen
Seller: LEVELL - Graphic Solutions

side punch option module P00166-501 Rev A6 P00165 952A Carriage interface board P00249-952B P00250-501 EL01323587 carriage driver motor analog encoder motor CM900-3600-A64 2200 C0 7422-502 0710 Phoenix Film tape with additional spare parts control board P00346-501 Rev. B4 P00345-001 P00346-0502 Phoenix power supply 0684450002 Phoenix OLP (Agfaline 20) rack developer, fixer, water laser diode optical assembly alignment SGM assembly 0029400562 Phoenix pumps OLP 16001-215 Cutter assembly take up cutter unit CG + 0029400568 motor and a lot of more Please make request what you need

Category: 109: other metal working machines
New in: 2009
Price: request quote
Location: ab Lager Monheim am Rhein
Seller: Kemmerich Werkzeugmaschinen GmbH

workpiece weight: 4 kg workpiece length: 200 mm dia. on complete length: 200 mm Control: Böhmer Turbo Control electrics - voltage/frequency: 400 / 50 V/Hz connected load: 12 kVA dimensions: 2,6 x x 1,5 x 2,6 m weight: 3,2 t Acoustical test stand for checking and then balancing turbocharger fuselage groups. - Chip extraction - Alignment unit - grippers - Milling unit with compressed air milling spindle

Category: 109: other metal working machines
New in: 2007
Price: 22.000 €
Location: Land-hu Hungary, 2800 Tatabánya
Seller: Telkes Gép GmbH

Maker: Magnemag 1.3 Plate Specifications Length of plate Max. 14500 mm Min. 2000 mm Width of plates Max. 3000 mm Min. 1000 mm Thickness Max. 100 mm Min. 8 mm Temperature Max. 500?C Min. 0?C Surface to be marked Dry and clean Flatness (crosswise) Max. 25 mm/m Flatness (lengthwise) Max. 25 mm/m Ski-ends (front or tail) max. 200 mm (no test piece in case of ski- ends) Head raising max. 120 mm Plates are stopped / positioned for punch and paint marking Alignment Centre line Alignment tolerance ? 100 mm Stop tolerance 20 - 40 mm

Category: 109: other metal working machines
New in: 2006
Price: request quote
Location: Malsch
Seller: Emuk Werkzeugmaschinen GmbH

max. wheel diameter: 5 - 1000 mm gear width: 1000 mm max. module: 25 min. module: 0,5 table diameter: 750 mm dist. between centers: 50 - 1200 mm total power requirement: 5 kW weight of the machine ca.: 13 t dimensions of the machine ca.: 2,2 x 1,4 x 2,7 m Software gearing (inside + outside): ? tamo = alignment ? Tgear = gear ? Tshaft = shape and location ? Tbevel = bevel gear ? Tcut = cutting wheel ? Troot = tooth rounding ? Tcali = Calibration button ? Tstylus = create button Macro = macro ? Statistic CM modules: ? CM-BAG = Basic Geometry ? CM-PROG = Professional Geometry ? CM-CAA1 = Computer Aided Accuracy ? CM-CAA2 = Computer Aided Accuracy ? CM-CAA3 = Computer Aided Accuracy ? CM-CAAT1 = ...

Category: 709: other food machines
New in: 2006
Price: request quote
Location: Opelstr. 29, 64546 Mörfelden, DE
Seller: Altuntas Bäckereimaschinen GmbH

Pizza Production Line / Round Pizza 275mm Diameter / 1000 Manufacturer: Rondo, Tromp, Mondini YOC: 2006 and other Capacity: 1000 Pizzas per hour Product: Pizzas (275mm Diameter) Electrical data: 400V - 3Ph - 50 Hz Siemens S7-300 controller Danfoss frequency converter Consist of: 1x VMI Bowl Lift Tipper Type: Elevateur Capacity: 340kg dough incl. bowl YOC: 2009 1x Rondo Pizza Line (Working width 800mm) Dough Extruder including Multiroller Flour shaker (6 pieces) Infeed conveyor HMI touch panel Satellite head (2 pieces) Intermediate conveyor Flour brush Spiked roller Bypass conveyor (bypass proofer) Proofer, about 20 minutes, ...

Category: 207: gluespreader machines
New in: used
Price: request quote
Location: Land-de Germany, 32683 Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Single sided automatic edge bander\r\nBrand: Vitap\r\nType: Quartz 5.6\r\nNew machine\r\n\r\nGeneral characteristics\r\nMonolithic steel frame of the machine for the high rigidity of the structure.\r\nFeeding industrial chain with rubber blocks.\r\nSliding of the blocks on 2 hardened and grinded steel guides.\r\nUpper steel clamp with 2 rows of rubber-coated rollers turning on closed bearings\r\nManual movement of the upper steel clamp, with automatic positioning of the operating units, for the panel thickness changing.\r\nMechanical digital readout of the panel thickness.\r\nPLC for switching of on/off the motord and the glue tank.\r\nGlue tank with automatic stand-by of the temperature.\r\ ...

Category: 1014: formworks
New in: 2012
Price: 44.263 €
Location: Land-at Austria, 5300 Hallwang
Seller: Berger International

TRIO is the universal formwork system for all applications where the main focus is on reducing the shuttering times with conventional DW tie technology. With the BFD coupler for virtually all connections as well as many other practical system solutions, TRIO has successfully proven itself in countless projects around the world. TRIO can be used together with the more advanced MAXIMO panel formwork. A large range of accessories, such as the BFD Coupler or MXK Bracket System, can be used in both systems. Easy and simple connections with the BFD Alignment Coupler as the only component for all panel connections Fast working operations with only a minimum of panel widths as well as panels tha ...

Category: 205: boring mills, machining centers
New in: used
Price: request quote
Location: Land-de Germany, 32683 Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

New CNC boring machine\r\nBrand: Vitap\r\nType: POINT 2\r\n\r\nTechnical details:\r\n\r\nPOINT CNC Boring Machine, the intelligent solution at the right price.\r\n\r\nCNC controlled point to point boring machine with through feed panel boring from the bottom and automatic panel return to the operator.\r\nPOINT 2 is the affordable automatic thru-feed drilling machine that combines flexibility and high productivity.\r\n\r\n1. It is perfectly suited for small and mid-size companies in needs of production cells for prototypes or special size furniture.\r\n\r\n2. It is ideal for artisans who need an automatic solution for drilling processing with low investment.\r\n\r\n3. It is ideal also for all ...

Category: 107: sheet metal working
New in: 2011
Price: request quote
Location: Land-in IN
Seller: GINDUMAC GmbH

OVERVIEW: Brand: Mazak Model: SPACE GEAR-48 MKII Application type: Laser Cutting Machine type: Laser Cutting Machine Availability: Immediately Construction year: 2011 Production hours: 22000 Laser hours: 22000 Beam hours: 22000 Location: India Origin country: Japan GENERAL DATA: Measurements width: 2600 mm Measurements depth: 7500 mm Measurements height: 2300 mm Machine weight: 12900 kg MAIN DRIVE: Laser brand: FANUC Laser power: 2.5 kW Laser type: CO2 CONTROL UNIT: Brand: FANUC Model: L64 Interface: DNC, Floppy MOVEMENT: X-AXIS: Movement: 2775 mm Y-AXIS: Movement: 1270 mm Z-AXIS: Movement: 420 mm MACHINE SPECIFIC DATA: Power meas. by software: Ye ...

Category: 207: gluespreader machines
New in: used
Price: request quote
Location: Land-de Germany, 32683 Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Single sided automatic edge bander\r\nMake: VITAP\r\nType: Quartz 4.5\r\nNew machine\r\n\r\nGENERAL CHARACTERISTICS\r\nMonolithic steel frame of the machine for the high rigidity of the structure.\r\nFeeding industrial chain with rubber blocks.\r\nSliding of the blocks on 2 hardened and grinded steel guides.\r\nUpper steel clamp with 2 rows of rubber-coated rollers turning on closed bearings\r\nManual movement of the upper steel clamp, with automatic positioning of the operating units, for the panel thickness changing.\r\nMechanical digital readout of the panel thickness.\r\nPLC for switching of on/off the motor and the glue tank .\r\nGlue tank with automatic stand-by of the temperature.\r\n ...

Category: 832: post press: folders
New in: 2006
Price: request quote
Location: Bahnhofstr. 13a, 16818 Dabergotz, DE
Seller: 3p Vertriebsgesellschaft mbH

Roller table for various applications starting with alignment and so on. Technical features Aligning, deviating or transport for further process like glueing, applying rubber or scanning can be done with this roller table. Also available as extended version for long process applications.

Category: 207: gluespreader machines
New in: used
Price: request quote
Location: Land-de Germany, 32683 Barntrup
Seller: Wehrmann Holzbearbeitungsmaschinen GmbH & Co.KG

Single side automatic edge banding machine\r\nMake: VITAP\r\nType: QUARTZ 3\r\nNew machine\r\n\r\nGeneral characteristics:\r\nMonolithic steel frame of the machine for the high rigidity of the structure.\r\nFeeding industrial chain with rubber blocks.\r\nSliding of the blocks on 2 hardened and grinded steel guides.\r\nUpper steel clamp with 2 rows of rubber-coated rollers turning on closed bearings\r\nManual movement of the upper steel clamp, with automatic positioning of the operating units, for the panel thickness changing.\r\nMechanical digital readout of the panel thickness.\r\nPLC for switching of on/off the motord and the glue tank .\r\nGlue tank with automatic stand-by of the temperat ...

Category: 109: other metal working machines
New in: 1994
Price: request quote
Location: Land-DE Germany, 73525 Schwäbisch Gmünd
Seller: IDS Trade GmbH

Year of construction: 1994 Control mode: Erocom 30 Hours of operation: 34766 STD Traverse paths: X 550 mm Y axis 850 mm Z axis 450 mm Table size: 700x500mm Bowl: 840mm B = L = 630 mm H = 340 mm Workpiece weight max: 1000 kg Distance table - Quill: 150 550 mm Resolution of the axes X, Y, Z: 0.001 mm C-axis: 0.001 ° Rotation speed: 22 RPM Working current (validation): 25 A Feed range: 1000 mm / min Maximum electrode weight: 50 kg Electrode places Magazine: 22 Machine weight: 3, 4t Spindle cooling: Yes -Machine space requirement approx.: 3 m x3m x 2, 65 m Accessories: â?¢ Probe Renishaw4C1429 with System 3R recording â?¢ Alignment block System 3R C ...

Category: 201: saws
New in: 1995
Price: request quote
Location: Land-it IT
Seller: Mercator S.R.L.

Electronic Beam Panel Saw with upper pusher axle:-Standard lift table with front loading from lift truck - -Frontal packer that ensure the alignment of the panels before the sizing - -Lateral conveyor including two independent arms - allowing for perfect squaring of panel throughout operation - -Movement of pusher with steel racks - -Standard electronic controller with monochrome video and disk drive. - TECHNICAL DATA:Cutting height: 90 mmMax cutting length: 4500 mmBlade diameter: 350 mmSaw-blade motor: 7,5 kW

Category: 832: post press: folders
New in: 2001
Price: request quote
Location: D - Brandenburg
Seller: 3p Vertriebsgesellschaft mbH

Heidelberg Stahlfolder flat stacking feeder FI 40 solo from 2001. Function: -Separating Planner sheets of various paper types -Separation of single arcs in Sau degree -Precise alignment of the arches by bias Construction: -Lifting table with stack magazine height 600 mm -Separation unit, double sheet control, from Setup table, -Control cabinet -Vacuum pump Control: -Control and control panel with emergency stop, drive start/stop, bow Start/stop, single cycle retrieval, vacuum cycle interruption, etc. -Signal interface running sensor for the foreign machine Working width: 400 mm Spout height: approx. 98-110 mm Product access: along Smallest product: Length  ...

Category: 832: post press: folders
New in: 1991
Price: request quote
Location: D - Berlin
Seller: 3p Vertriebsgesellschaft mbH

-4 buckle plates -Underfloor sniffer with alignment Band display 220 V connection Max paper size width 358 x length 530 mm min. paper size 80 x 100 mm Folding length 33 mm minimum Paper weight 60-200 gr Format change within a short time Capacity up to 40,000 crimps / h depending on the paper quality DIN A4 80 g; good

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)